Sohyeon Seo
Sohyeon Seo has a total of 57 co-authors. Here are the top co-authors by number of shared publications:
- Hyoyoung Lee
Department of Chemistry, Sungkyunkwan University (SKKU), Suwon, Republic of Korea
12 shared publications Jungsue Choi
Department of Chemistry
6 shared publicationsKim My Tran
EcoCatal Co., Ltd
4 shared publicationsHyun Ko
Department of Biophysics
3 shared publicationsJoosung Kim
Department of Energy Science
3 shared publicationsYeonsu Han
Department of Chemistry
3 shared publications
Latest Publications
- 24 November 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (49) , 17211-17219
Precisely Engineered Band Edges of Phase-Selectively Reduced TiO 2 via Dual Doping for Antimicrobial Photocatalysis with Enhanced Indoor Light Harvesting
Bacterial contamination of natural waters poses a serious threat to public health, and a TiO2-based photocatalyst has been explored as one of the promising solutions to address this challenge. However, its practical application remains limited by the wide band gap, weak visible-light response, and rapid charge recombination. Here, we report a selectively disordered TiO2-based dual strategy that integrates selective anatase reduction with S and Cu codoping (Cu-S-BTO). Selective reduction generated stable oxygen vacancies that enabled effective dopant incorporation and were preserved after doping, leading to a narrow band gap, enhanced charge separation, and improved visible-light harvesting. Under low-energy indoor light (700 lx), Cu-S-BTO achieved 99.9% antibacterial efficiency against four bacterial and one fungal strains while maintaining cytocompatibility with human skin cells. Moreover, in natural water samples from a valley, stream, and lake, Cu-S-BTO induced rapid 3-4 log bacterial reductions. This catalyst offers a practical and scalable solution for antimicrobial applications.
- 24 November 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (49) , 17211-17219
Precisely Engineered Band Edges of Phase-Selectively Reduced TiO 2 via Dual Doping for Antimicrobial Photocatalysis with Enhanced Indoor Light Harvesting
Bacterial contamination of natural waters poses a serious threat to public health, and a TiO2-based photocatalyst has been explored as one of the promising solutions to address this challenge. However, its practical application remains limited by the wide band gap, weak visible-light response, and rapid charge recombination. Here, we report a selectively disordered TiO2-based dual strategy that integrates selective anatase reduction with S and Cu codoping (Cu-S-BTO). Selective reduction generated stable oxygen vacancies that enabled effective dopant incorporation and were preserved after doping, leading to a narrow band gap, enhanced charge separation, and improved visible-light harvesting. Under low-energy indoor light (700 lx), Cu-S-BTO achieved 99.9% antibacterial efficiency against four bacterial and one fungal strains while maintaining cytocompatibility with human skin cells. Moreover, in natural water samples from a valley, stream, and lake, Cu-S-BTO induced rapid 3-4 log bacterial reductions. This catalyst offers a practical and scalable solution for antimicrobial applications.
- 20 June 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (26) , 7999-8007
Insight into Facile Ion Diffusion in Resistive Switching Medium toward Low Operating Voltage Memory
The rapid increase in data storage worldwide demands a substantial amount of energy consumption annually. Studies looking at low power consumption accompanied by high-performance memory are essential for next-generation memory. Here, Graphdiyne oxide (GDYO), characterized by facile resistive switching behavior, is systematically reported toward a low switching voltage memristor. The intrinsic large, homogeneous pore-size structure in GDYO facilitates ion diffusion processes, effectively suppressing the operating voltage. The theoretical approach highlights the remarkably low diffusion energy of the Ag ion (0.11 eV) and oxygen functional group (0.6 eV) within three layers of GDYO. The Ag/GDYO/Au memristor exhibits an ultralow operating voltage of 0.25 V with a GDYO thickness of 5 nm; meanwhile, the thicker GDYO of 29 nm presents multilevel memory with an ON/OFF ratio of up to 104. The findings shed light on memory resistive switching behavior, facilitating future improvements in GDYO-based devices toward opto-memristors, artificial synapses, and neuromorphic applications.
- 20 June 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (26) , 7999-8007
Insight into Facile Ion Diffusion in Resistive Switching Medium toward Low Operating Voltage Memory
The rapid increase in data storage worldwide demands a substantial amount of energy consumption annually. Studies looking at low power consumption accompanied by high-performance memory are essential for next-generation memory. Here, Graphdiyne oxide (GDYO), characterized by facile resistive switching behavior, is systematically reported toward a low switching voltage memristor. The intrinsic large, homogeneous pore-size structure in GDYO facilitates ion diffusion processes, effectively suppressing the operating voltage. The theoretical approach highlights the remarkably low diffusion energy of the Ag ion (0.11 eV) and oxygen functional group (0.6 eV) within three layers of GDYO. The Ag/GDYO/Au memristor exhibits an ultralow operating voltage of 0.25 V with a GDYO thickness of 5 nm; meanwhile, the thicker GDYO of 29 nm presents multilevel memory with an ON/OFF ratio of up to 104. The findings shed light on memory resistive switching behavior, facilitating future improvements in GDYO-based devices toward opto-memristors, artificial synapses, and neuromorphic applications.
- 18 June 2024
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 7 (12) , 14123-14133
Fe Species Supported on Blue-TiO2/WO3 Nanocomposite as Catalyst for the Decomposition of Toluene Vapor under White Light-Emitting Diode Lighting
- 18 June 2024
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 7 (12) , 14123-14133
Fe Species Supported on Blue-TiO2/WO3 Nanocomposite as Catalyst for the Decomposition of Toluene Vapor under White Light-Emitting Diode Lighting
- 13 May 2024
- Published by American Chemical Society (ACS) in ACS Infectious Diseases
- Vol. 10 (6) , 1890-1895
Indoor-Light-Activated Blue TiO2–Molecule–WO3 Visible Photocatalyst for Antibacterial Performance against Escherichia coli
Currently used visible light catalysts either operate with high-power light sources or require prolonged periods of time for catalytic reactions. This presents a limitation regarding facile application in indoor environments and spaces frequented by the public. Furthermore, this gives rise to elevated power consumption. Here, we enhance photocatalytic performance with blue TiO2 and WO3 complexes covalently coupled through an organic molecule, 3-mercaptopropionic acid, under indoor light. Antibacterial experiments against 108 CFU/mL Escherichia coli (E. coli) suspensions were conducted under indoor light exposure conditions. They showed a sterilization effect of almost 90% within 70 min and nearly 100% after 110 min. The complex generates reactive oxygen species (ROS), such as •OH and O2•-, under natural air conditions. We also showed that h+ and •OH are important for sterilizing E. coli using common scavengers. This research highlights the potential of these complexes to generate ROS, effectively playing a crucial role in antibacterial effects under indoor light.
- 13 May 2024
- Published by American Chemical Society (ACS) in ACS Infectious Diseases
- Vol. 10 (6) , 1890-1895
Indoor-Light-Activated Blue TiO2–Molecule–WO3 Visible Photocatalyst for Antibacterial Performance against Escherichia coli
Currently used visible light catalysts either operate with high-power light sources or require prolonged periods of time for catalytic reactions. This presents a limitation regarding facile application in indoor environments and spaces frequented by the public. Furthermore, this gives rise to elevated power consumption. Here, we enhance photocatalytic performance with blue TiO2 and WO3 complexes covalently coupled through an organic molecule, 3-mercaptopropionic acid, under indoor light. Antibacterial experiments against 108 CFU/mL Escherichia coli (E. coli) suspensions were conducted under indoor light exposure conditions. They showed a sterilization effect of almost 90% within 70 min and nearly 100% after 110 min. The complex generates reactive oxygen species (ROS), such as •OH and O2•-, under natural air conditions. We also showed that h+ and •OH are important for sterilizing E. coli using common scavengers. This research highlights the potential of these complexes to generate ROS, effectively playing a crucial role in antibacterial effects under indoor light.
- 24 November 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (48) , 56084-56094
Ultrasensitive Carbon Monoxide Gas Sensor at Room Temperature Using Fluorine-Graphdiyne
Currently, most carbon monoxide (CO) gas sensors work at high temperatures of over 150 °C. Developing CO gas sensors that operate at room temperature is challenging because of the sensitivity trade-offs. Here, we report an ultrasensitive CO gas sensor at room temperature using fluorine-graphdiyne (F-GDY) in which electrons are increased by light. The GDY films used as channels of field-effect transistors were prepared by using chemical vapor deposition and were characterized by using various spectroscopic techniques. With exposure to UV light, F-GDY showed a more efficient photodoping effect than hydrogen-graphdiyne (H-GDY), resulting in a larger negative shift in the charge neutral point (CNP) to form an n-type semiconductor and an increase in the Fermi level from -5.27 to -5.01 eV. Upon CO exposure, the negatively shifted CNP moved toward a positive shift, and the electrical current decreased, indicating electron transfer from photodoped GDYs to CO. Dynamic sensing experiments demonstrated that negatively charged F-GDY is remarkably sensitive to an electron-deficient CO gas, even with a low concentration of 200 parts per billion. This work provides a promising solution for enhancing the CO sensitivity at room temperature and expanding the application of GDYs in electronic devices.
- 24 November 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (48) , 56084-56094
Ultrasensitive Carbon Monoxide Gas Sensor at Room Temperature Using Fluorine-Graphdiyne
Currently, most carbon monoxide (CO) gas sensors work at high temperatures of over 150 °C. Developing CO gas sensors that operate at room temperature is challenging because of the sensitivity trade-offs. Here, we report an ultrasensitive CO gas sensor at room temperature using fluorine-graphdiyne (F-GDY) in which electrons are increased by light. The GDY films used as channels of field-effect transistors were prepared by using chemical vapor deposition and were characterized by using various spectroscopic techniques. With exposure to UV light, F-GDY showed a more efficient photodoping effect than hydrogen-graphdiyne (H-GDY), resulting in a larger negative shift in the charge neutral point (CNP) to form an n-type semiconductor and an increase in the Fermi level from -5.27 to -5.01 eV. Upon CO exposure, the negatively shifted CNP moved toward a positive shift, and the electrical current decreased, indicating electron transfer from photodoped GDYs to CO. Dynamic sensing experiments demonstrated that negatively charged F-GDY is remarkably sensitive to an electron-deficient CO gas, even with a low concentration of 200 parts per billion. This work provides a promising solution for enhancing the CO sensitivity at room temperature and expanding the application of GDYs in electronic devices.
- 25 August 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (35) , 41708-41719
Low-Temperature Layer-by-Layer Growth of Semiconducting Few-Layer γ-Graphyne to Exploit Robust Biocompatibility
The sp-hybridized carbon network in single- or few-layer γ-graphyne (γ-GY) has a polarized electron distribution, which can be crucial in overcoming biosafety issues. Here, we report the low-temperature synthesis, electronic properties, and amyloid fibril nanostructures of electrostatic few-layer γ-GY. ABC stacked γ-GY is synthesized by layer-by-layer growth on a catalytic copper surface, exhibiting intrinsic p-type semiconducting properties in few-layer γ-GY. Thickness-dependent electronic properties of γ-GY elucidate interlayer interactions by electron doping between electrostatic layers and layer stacking-involved modulation of the band gap. Electrostatic few-layer γ-GY induces high electronic sensitivity and intense interaction with amyloid beta (i.e., Aβ40) peptides assembling into elongated mature Aβ40 fibrils. Two-dimensional biocompatible nanostructures of Aβ40 fibrils/few-layer γ-GY enable excellent cell viability and high neuronal differentiation of living cells without external stimulation.
- 25 August 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (35) , 41708-41719
Low-Temperature Layer-by-Layer Growth of Semiconducting Few-Layer γ-Graphyne to Exploit Robust Biocompatibility
The sp-hybridized carbon network in single- or few-layer γ-graphyne (γ-GY) has a polarized electron distribution, which can be crucial in overcoming biosafety issues. Here, we report the low-temperature synthesis, electronic properties, and amyloid fibril nanostructures of electrostatic few-layer γ-GY. ABC stacked γ-GY is synthesized by layer-by-layer growth on a catalytic copper surface, exhibiting intrinsic p-type semiconducting properties in few-layer γ-GY. Thickness-dependent electronic properties of γ-GY elucidate interlayer interactions by electron doping between electrostatic layers and layer stacking-involved modulation of the band gap. Electrostatic few-layer γ-GY induces high electronic sensitivity and intense interaction with amyloid beta (i.e., Aβ40) peptides assembling into elongated mature Aβ40 fibrils. Two-dimensional biocompatible nanostructures of Aβ40 fibrils/few-layer γ-GY enable excellent cell viability and high neuronal differentiation of living cells without external stimulation.
- 27 June 2023
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 6 (13) , 11381-11391
Molecular-Linked Z-Scheme Heterojunction of Ti3+-Doped TiO2 and WO3 Nanoparticles for Photocatalytic Removal of Acetaldehyde
- 27 June 2023
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 6 (13) , 11381-11391
Molecular-Linked Z-Scheme Heterojunction of Ti3+-Doped TiO2 and WO3 Nanoparticles for Photocatalytic Removal of Acetaldehyde
- Open Access
- 12 August 2022
- Published by Springer Nature in Nature Communications
- Vol. 13 (1) , 1-8
CNT-molecule-CNT (1D-0D-1D) van der Waals integration ferroelectric memory with 1-nm2 junction area
The device’s integration of molecular electronics is limited regarding the large-scale fabrication of gap electrodes on a molecular scale. The van der Waals integration (vdWI) of a vertically aligned molecular layer (0D) with 2D or 3D electrodes indicates the possibility of device’s integration; however, the active junction area of 0D-2D and 0D-3D vdWIs remains at a microscale size. Here, we introduce the robust fabrication of a vertical 1D-0D-1D vdWI device with the ultra-small junction area of 1 nm2 achieved by cross-stacking top carbon nanotubes (CNTs) on molecularly assembled bottom CNTs. 1D-0D-1D vdWI memories are demonstrated through ferroelectric switching of azobenzene molecules owing to the cis-trans transformation combined with the permanent dipole moment of the end-tail -CF3 group. In this work, our 1D-0D-1D vdWI memory exhibits a retention performance above 2000 s, over 300 cycles with an on/off ratio of approximately 105 and record current density (3.4 × 108 A/cm2), which is 100 times higher than previous study through the smallest junction area achieved in a vdWI. The simple stacking of aligned CNTs (4 × 4) allows integration of memory arrays (16 junctions) with high device operational yield (100%), offering integration guidelines for future molecular electronics.
- 12 August 2022
- Published by Springer Nature in Nature Communications
- Vol. 13 (1) , 1-8
Open AccessCNT-molecule-CNT (1D-0D-1D) van der Waals integration ferroelectric memory with 1-nm2 junction area
The device’s integration of molecular electronics is limited regarding the large-scale fabrication of gap electrodes on a molecular scale. The van der Waals integration (vdWI) of a vertically aligned molecular layer (0D) with 2D or 3D electrodes indicates the possibility of device’s integration; however, the active junction area of 0D-2D and 0D-3D vdWIs remains at a microscale size. Here, we introduce the robust fabrication of a vertical 1D-0D-1D vdWI device with the ultra-small junction area of 1 nm2 achieved by cross-stacking top carbon nanotubes (CNTs) on molecularly assembled bottom CNTs. 1D-0D-1D vdWI memories are demonstrated through ferroelectric switching of azobenzene molecules owing to the cis-trans transformation combined with the permanent dipole moment of the end-tail -CF3 group. In this work, our 1D-0D-1D vdWI memory exhibits a retention performance above 2000 s, over 300 cycles with an on/off ratio of approximately 105 and record current density (3.4 × 108 A/cm2), which is 100 times higher than previous study through the smallest junction area achieved in a vdWI. The simple stacking of aligned CNTs (4 × 4) allows integration of memory arrays (16 junctions) with high device operational yield (100%), offering integration guidelines for future molecular electronics.
- Open Access
- 16 July 2021
- Published by Springer Nature in NPG Asia Materials
- Vol. 13 (1) , 1-12
Electrical characteristics of amyloid beta peptides in vertical junctions
Assembled amyloid beta (Aβ) peptides have been considered pathological assemblies involved in human brain diseases, and the electron transfer or electron transport characteristics of Aβ are important for the formation of structured assemblies. Here, we report the electrical characteristics of surface-assembled Aβ peptides similar to those observed in Alzheimer’s patients. These characteristics correlate to their electron transfer characteristics. Electrical current–voltage plots of Aβ vertical junction devices show the Aβ sequence dependence of the current densities at both Aβ monomers (mono-Aβs) and Aβ oligomers (oli-Aβs), while Aβ sequence dependence is not clearly observed in the electrical characteristics of Aβ planar field effect transistors (FETs). In particular, surface oligomerization of Aβ peptides drastically decreases the activity of electron transfer, which presents a change in the electron transport pathway in the Aβ vertical junctions. Electron transport at oli-Aβ junctions is symmetric (tunneling/tunneling) due to the weak and voltage-independent coupling of the less redox-reactive oli-Aβ to the contacts, while that at mono-Aβ junctions is asymmetric (hopping/tunneling) due to redox levels of mono-Aβ voltage-dependently coupled with contact electrodes. Consequently, through vertical junctions, the sequence- and conformation-dependent electrical characteristics of Aβs can reveal their electron transfer activities.
- 16 July 2021
- Published by Springer Nature in NPG Asia Materials
- Vol. 13 (1) , 1-12
Open AccessElectrical characteristics of amyloid beta peptides in vertical junctions
Assembled amyloid beta (Aβ) peptides have been considered pathological assemblies involved in human brain diseases, and the electron transfer or electron transport characteristics of Aβ are important for the formation of structured assemblies. Here, we report the electrical characteristics of surface-assembled Aβ peptides similar to those observed in Alzheimer’s patients. These characteristics correlate to their electron transfer characteristics. Electrical current–voltage plots of Aβ vertical junction devices show the Aβ sequence dependence of the current densities at both Aβ monomers (mono-Aβs) and Aβ oligomers (oli-Aβs), while Aβ sequence dependence is not clearly observed in the electrical characteristics of Aβ planar field effect transistors (FETs). In particular, surface oligomerization of Aβ peptides drastically decreases the activity of electron transfer, which presents a change in the electron transport pathway in the Aβ vertical junctions. Electron transport at oli-Aβ junctions is symmetric (tunneling/tunneling) due to the weak and voltage-independent coupling of the less redox-reactive oli-Aβ to the contacts, while that at mono-Aβ junctions is asymmetric (hopping/tunneling) due to redox levels of mono-Aβ voltage-dependently coupled with contact electrodes. Consequently, through vertical junctions, the sequence- and conformation-dependent electrical characteristics of Aβs can reveal their electron transfer activities.
- Open Access
Recent Developments of Advanced Ti3+-Self-Doped TiO2 for Efficient Visible-Light-Driven Photocatalysis
Research into the development of efficient semiconductor photocatalytic materials is a promising approach to solving environmental and energy problems worldwide. Among these materials, TiO2 photocatalysts are one of the most commonly used due to their efficient photoactivity, high stability, low cost and environmental friendliness. However, since the UV content of sunlight is less than 5%, the development of visible light-activated TiO2-based photocatalysts is essential to increase the solar energy efficiency. Here, we review recent works on advanced visible light-activated Ti3+-self-doped TiO2 (Ti3+–TiO2) photocatalysts with improved electronic band structures for efficient charge separation. We analyze the different methods used to produce Ti3+–TiO2 photocatalysts, where Ti3+ with a high oxygen defect density can be used for energy production from visible light. We categorize advanced modifications in electronic states of Ti3+–TiO2 by improving their photocatalytic activity. Ti3+–TiO2 photocatalysts with large charge separation and low recombination of photogenerated electrons and holes can be practically applied for energy conversion and advanced oxidation processes in natural environments and deserve significant attention.
Open AccessRecent Developments of Advanced Ti3+-Self-Doped TiO2 for Efficient Visible-Light-Driven Photocatalysis
Research into the development of efficient semiconductor photocatalytic materials is a promising approach to solving environmental and energy problems worldwide. Among these materials, TiO2 photocatalysts are one of the most commonly used due to their efficient photoactivity, high stability, low cost and environmental friendliness. However, since the UV content of sunlight is less than 5%, the development of visible light-activated TiO2-based photocatalysts is essential to increase the solar energy efficiency. Here, we review recent works on advanced visible light-activated Ti3+-self-doped TiO2 (Ti3+–TiO2) photocatalysts with improved electronic band structures for efficient charge separation. We analyze the different methods used to produce Ti3+–TiO2 photocatalysts, where Ti3+ with a high oxygen defect density can be used for energy production from visible light. We categorize advanced modifications in electronic states of Ti3+–TiO2 by improving their photocatalytic activity. Ti3+–TiO2 photocatalysts with large charge separation and low recombination of photogenerated electrons and holes can be practically applied for energy conversion and advanced oxidation processes in natural environments and deserve significant attention.