Zhaowei Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Zhaowei Zhang has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Johannes Gerstmayr
Department of Mechatronics, University of Innsbruck, Innsbruck, Austria
3 shared publications Weijia Zhou
3 shared publications- Michael Pieber
Department of Mechatronics, University of Innsbruck, Innsbruck, Austria
2 shared publications - Wei Zhang
Shenyang Institute of Automation, Chinese Academy of Sciences
2 shared publications - Xiaohui Wang
State Key Laboratory of Robotics and Intelligent Systems, Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang 110016, China
2 shared publications - Xingang Zhao
Chinese Academy of Sciences
2 shared publications
Latest Publications
- Open Access
- 21 August 2026
- Published by Elsevier in Mechanism and Machine Theory
- Vol. 229
A folding and deployment strategy for infinite planes based on multi-hub chiral origami
- 21 August 2026
- Published by Elsevier in Mechanism and Machine Theory
- Vol. 229
Open AccessA folding and deployment strategy for infinite planes based on multi-hub chiral origami
- Open Access
- 22 April 2026
- Published by Elsevier in SSRN Electronic Journal
A Folding and Deployment Strategy for Infinite Planes Based on Multi-Hub Chiral Origami
Folding an infinite plane based on origami principles poses a fundamental challenge, particularly in aerospace engineering, where efficient stowage and deployment of large-scale structures such as membranes and solar arrays are critical. The flasher pattern is widely used to achieve high storage efficiency in the stowed configuration. However, extending this folding strategy to structures with theoretically infinite surface area is problematic due to panel thickness. Addressing this, we propose a novel folding strategy based on the integration of multi-hub chiral origami, enabling the compact stowage of infinitely planar structures with finite thickness. To guide the assembly of individual chiral origami units, design rules are introduced and the area-to-volume ratios of the stowed and deployed configurations are examined. The deployment process is investigated through numerical simulations using both an origami simulation tool and a multibody dynamics approach. For verification, physical prototypes of both single-hub and four-hub chiral origami are fabricated and experimentally tested. The results demonstrate that the proposed multi-hub chiral origami approach offers an effective strategy for folding and deploying structures with theoretically infinite plane while accounting for finite thickness.
- 22 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessA Folding and Deployment Strategy for Infinite Planes Based on Multi-Hub Chiral Origami
Folding an infinite plane based on origami principles poses a fundamental challenge, particularly in aerospace engineering, where efficient stowage and deployment of large-scale structures such as membranes and solar arrays are critical. The flasher pattern is widely used to achieve high storage efficiency in the stowed configuration. However, extending this folding strategy to structures with theoretically infinite surface area is problematic due to panel thickness. Addressing this, we propose a novel folding strategy based on the integration of multi-hub chiral origami, enabling the compact stowage of infinitely planar structures with finite thickness. To guide the assembly of individual chiral origami units, design rules are introduced and the area-to-volume ratios of the stowed and deployed configurations are examined. The deployment process is investigated through numerical simulations using both an origami simulation tool and a multibody dynamics approach. For verification, physical prototypes of both single-hub and four-hub chiral origami are fabricated and experimentally tested. The results demonstrate that the proposed multi-hub chiral origami approach offers an effective strategy for folding and deploying structures with theoretically infinite plane while accounting for finite thickness.
- Open Access
- 2 February 2026
- Published by MDPI AG in Biomimetics
- Vol. 11 (2) , 104
Review of Soft Robotic Gloves and Functional Electrical Stimulation Affecting Hand Function Rehabilitation for Stroke Patients
Stroke often results in impaired hand motor function, making effective hand rehabilitation essential for restoring activities of daily living (ADLs). Motor rehabilitation and neurorehabilitation are two major pathways to functional recovery. Rehabilitation gloves have proven to be effective tools for motor rehabilitation, and among them, soft robotic gloves (SRGs) have emerged as a research focus due to their lightweight design and inherent safety. Functional electrical stimulation (FES), which applies electrical currents to muscles and nerves, shows promise in promoting motor neural reorganization and restoring muscle strength in the hands of stroke survivors. The technologies applied to hand rehabilitation must possess the characteristics of safety, comfort, and practicality, while overcoming critical challenges such as portability, user-friendliness, and wearability. Motivated by the rehabilitation needs of post-stroke patients, this paper reviews recent advances in SRGs, FES, and hybrid hand rehabilitation systems (HHRSs) for hand rehabilitation, systematically examining progress in actuation strategies, intention sensing, and control algorithms across these three technologies. Furthermore, the limitations and technical challenges of current HHRSs are analyzed and four key future research directions are identified to pave the way for further development in this field.
- 2 February 2026
- Published by MDPI AG in Biomimetics
- Vol. 11 (2) , 104
Open AccessReview of Soft Robotic Gloves and Functional Electrical Stimulation Affecting Hand Function Rehabilitation for Stroke Patients
Stroke often results in impaired hand motor function, making effective hand rehabilitation essential for restoring activities of daily living (ADLs). Motor rehabilitation and neurorehabilitation are two major pathways to functional recovery. Rehabilitation gloves have proven to be effective tools for motor rehabilitation, and among them, soft robotic gloves (SRGs) have emerged as a research focus due to their lightweight design and inherent safety. Functional electrical stimulation (FES), which applies electrical currents to muscles and nerves, shows promise in promoting motor neural reorganization and restoring muscle strength in the hands of stroke survivors. The technologies applied to hand rehabilitation must possess the characteristics of safety, comfort, and practicality, while overcoming critical challenges such as portability, user-friendliness, and wearability. Motivated by the rehabilitation needs of post-stroke patients, this paper reviews recent advances in SRGs, FES, and hybrid hand rehabilitation systems (HHRSs) for hand rehabilitation, systematically examining progress in actuation strategies, intention sensing, and control algorithms across these three technologies. Furthermore, the limitations and technical challenges of current HHRSs are analyzed and four key future research directions are identified to pave the way for further development in this field.
- Open Access
- 16 July 2025
- Published by Springer Nature in Meccanica
- Vol. 60 (10-11) , 3201-3218
Topology optimization of beam-based flexural pivots with arbitrary centers of rotation
In self-reconfigurable structures, the mechanical design of the joints is one of the most challenging tasks. Within this context, flexural pivots are widely adopted as compliant mechanisms due to their ideal design for achieving low rotational stiffness and high off-axis stiffness. To maximize performance, they are often optimized for specific application requirements. However, designing flexural pivots for self-reconfigurable structures with an arbitrary center of rotation remains a significant challenge. To address this, we propose an approach for optimizing the topology of beam-based flexural pivots undergoing large deflections, aiming to achieve an optimal configuration with an arbitrary center of rotation. To this end, both the stiffness-based objective function and the strain energy-based objective function are introduced. For the implementation, a geometrically exact beam element is utilized to establish a dual-layer ground structure for optimization. A genetic algorithm is employed to identify optimal configurations for flexural pivots, including traditional notch hinges and cross-spring pivots. Additionally, the influence of different objective functions and their corresponding parameters on the optimized topology is examined and verified. Ultimately, this approach yields optimal topologies in three representative examples with different centers of rotation, establishing a foundation for the design of compliant mechanisms with user-defined rotational behavior.
- 16 July 2025
- Published by Springer Nature in Meccanica
- Vol. 60 (10-11) , 3201-3218
Open AccessTopology optimization of beam-based flexural pivots with arbitrary centers of rotation
In self-reconfigurable structures, the mechanical design of the joints is one of the most challenging tasks. Within this context, flexural pivots are widely adopted as compliant mechanisms due to their ideal design for achieving low rotational stiffness and high off-axis stiffness. To maximize performance, they are often optimized for specific application requirements. However, designing flexural pivots for self-reconfigurable structures with an arbitrary center of rotation remains a significant challenge. To address this, we propose an approach for optimizing the topology of beam-based flexural pivots undergoing large deflections, aiming to achieve an optimal configuration with an arbitrary center of rotation. To this end, both the stiffness-based objective function and the strain energy-based objective function are introduced. For the implementation, a geometrically exact beam element is utilized to establish a dual-layer ground structure for optimization. A genetic algorithm is employed to identify optimal configurations for flexural pivots, including traditional notch hinges and cross-spring pivots. Additionally, the influence of different objective functions and their corresponding parameters on the optimized topology is examined and verified. Ultimately, this approach yields optimal topologies in three representative examples with different centers of rotation, establishing a foundation for the design of compliant mechanisms with user-defined rotational behavior.
- Open Access
- 21 February 2025
- Published by MDPI AG in Biomimetics
- Vol. 10 (3) , 129
A Pneumatic Soft Glove System Based on Bidirectional Bending Functionality for Rehabilitation
Stroke-related hand dysfunction significantly limits the ability to perform daily activities. Pneumatic soft gloves can provide rehabilitation training and support for individuals with impaired hand function, enhancing their independence. This paper presents a novel pneumatic soft robotic system for hand rehabilitation featuring bidirectional bending actuators. The system comprises a pneumatic soft glove and a pneumatic control platform, enabling various rehabilitation gestures and assisting with finger grasping. The main bending module of the pneumatic soft actuator features a three-stage cavity structure, allowing for a wider range of finger rehabilitation training gestures and greater bending angles. The reverse-bending module uses a trapezoidal cavity design to enhance the reverse-bending capability, effectively facilitating finger extension motion. The pneumatic control platform is simple to set up, but effectively controls the actuators of the soft glove, which enables both main and reverse bending. This allows individuals with hand impairments to perform various gestures and grasp different objects. Experiments demonstrate that the pneumatic soft glove has a measurable load capacity. Additionally, the pneumatic soft glove system is capable of executing single-finger movements, a variety of rehabilitation gestures, and the ability to grasp different objects. This functionality is highly beneficial for the rehabilitation of individuals with hand impairments.
- 21 February 2025
- Published by MDPI AG in Biomimetics
- Vol. 10 (3) , 129
Open AccessA Pneumatic Soft Glove System Based on Bidirectional Bending Functionality for Rehabilitation
Stroke-related hand dysfunction significantly limits the ability to perform daily activities. Pneumatic soft gloves can provide rehabilitation training and support for individuals with impaired hand function, enhancing their independence. This paper presents a novel pneumatic soft robotic system for hand rehabilitation featuring bidirectional bending actuators. The system comprises a pneumatic soft glove and a pneumatic control platform, enabling various rehabilitation gestures and assisting with finger grasping. The main bending module of the pneumatic soft actuator features a three-stage cavity structure, allowing for a wider range of finger rehabilitation training gestures and greater bending angles. The reverse-bending module uses a trapezoidal cavity design to enhance the reverse-bending capability, effectively facilitating finger extension motion. The pneumatic control platform is simple to set up, but effectively controls the actuators of the soft glove, which enables both main and reverse bending. This allows individuals with hand impairments to perform various gestures and grasp different objects. Experiments demonstrate that the pneumatic soft glove has a measurable load capacity. Additionally, the pneumatic soft glove system is capable of executing single-finger movements, a variety of rehabilitation gestures, and the ability to grasp different objects. This functionality is highly beneficial for the rehabilitation of individuals with hand impairments.
- 20 December 2024
- Published by Elsevier in Mechanism and Machine Theory
- Vol. 205
Generalized optimization approach to design in-plane distributed compliant remote center of motion mechanism
- 20 December 2024
- Published by Elsevier in Mechanism and Machine Theory
- Vol. 205
Generalized optimization approach to design in-plane distributed compliant remote center of motion mechanism
- 13 September 2024
- Published by ASME International in Journal of Computational and Nonlinear Dynamics
- Vol. 19 (11) , 1-18
Application of Laminate Theory to Plate Elements Based on Absolute Nodal Coordinate Formulation
Laminated plates have a wide range of applications in engineering, and their flexibility becomes increasingly significant with the development of lightweighting technology. The absolute nodal coordinate formulation (ANCF) has emerged as a promising approach for modeling flexible multibody dynamics. However, researches on thick laminated plates with shear deformation for multiflexible systems remain limited. To investigate the application of ANCF plate elements for laminated plates, this article introduces a new laminated plate element that considers shear deformation. We utilize the fully parameterized ANCF plate element to analyze laminated composite structures, focusing specifically on their layers in the thickness direction. By employing a structural mechanics approach, the study achieves a uniform stiffness matrix that can adapt to laminated plates with shear deformation and can be precomputed in advance. Additionally, a summary of a thin laminated plate element is provided for comparison. Both plate elements are composed by layers, and their elastic forces and Jacobian matrices are derived using first-order shear theory and Kirchhoff's theory, respectively. The effectiveness and accuracy of the proposed elements are validated through a series of benchmark problems encompassing modal, static, and dynamic investigations. The study thoroughly analyzes the results compared with the commercial finite element method software abaqus and analytical approach. The findings demonstrate that the methods effectively address laminated plates.
- 13 September 2024
- Published by ASME International in Journal of Computational and Nonlinear Dynamics
- Vol. 19 (11) , 1-18
Application of Laminate Theory to Plate Elements Based on Absolute Nodal Coordinate Formulation
Laminated plates have a wide range of applications in engineering, and their flexibility becomes increasingly significant with the development of lightweighting technology. The absolute nodal coordinate formulation (ANCF) has emerged as a promising approach for modeling flexible multibody dynamics. However, researches on thick laminated plates with shear deformation for multiflexible systems remain limited. To investigate the application of ANCF plate elements for laminated plates, this article introduces a new laminated plate element that considers shear deformation. We utilize the fully parameterized ANCF plate element to analyze laminated composite structures, focusing specifically on their layers in the thickness direction. By employing a structural mechanics approach, the study achieves a uniform stiffness matrix that can adapt to laminated plates with shear deformation and can be precomputed in advance. Additionally, a summary of a thin laminated plate element is provided for comparison. Both plate elements are composed by layers, and their elastic forces and Jacobian matrices are derived using first-order shear theory and Kirchhoff's theory, respectively. The effectiveness and accuracy of the proposed elements are validated through a series of benchmark problems encompassing modal, static, and dynamic investigations. The study thoroughly analyzes the results compared with the commercial finite element method software abaqus and analytical approach. The findings demonstrate that the methods effectively address laminated plates.
- 3 May 2022
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-Body Dynamics
- Vol. 236 (3) , 357-367
Research status and prospect of plate elements in absolute nodal coordinate formulation
The Absolute Nodal Coordinate Formulation (ANCF) is a milestone in the study of flexible multibody dynamics and is of great significance for the study of the dynamics of multi-flexible systems, of which the plate element is an important part. In this article, the construction and principles of this type of element are systematically traced, the types of elements that have been studied are summarized, and the research history of the element locking problem and extended applications in different fields are briefly described. Through the systematic summary, the shortcomings in the current research and application of the element are identified, and some suggestions for future theoretical research on the plate element are given. The functional expansion of the plate element under the conditions of constraints, materials and physical fields as well as practical engineering applications are discussed.
- 3 May 2022
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-Body Dynamics
- Vol. 236 (3) , 357-367
Research status and prospect of plate elements in absolute nodal coordinate formulation
The Absolute Nodal Coordinate Formulation (ANCF) is a milestone in the study of flexible multibody dynamics and is of great significance for the study of the dynamics of multi-flexible systems, of which the plate element is an important part. In this article, the construction and principles of this type of element are systematically traced, the types of elements that have been studied are summarized, and the research history of the element locking problem and extended applications in different fields are briefly described. Through the systematic summary, the shortcomings in the current research and application of the element are identified, and some suggestions for future theoretical research on the plate element are given. The functional expansion of the plate element under the conditions of constraints, materials and physical fields as well as practical engineering applications are discussed.
- 30 July 2021
- Published by Springer Nature in Archive of Applied Mechanics
- Vol. 91 (10) , 4069-4080
A novel computational method for dynamic analysis of flexible sandwich plates undergoing large deformation
- 30 July 2021
- Published by Springer Nature in Archive of Applied Mechanics
- Vol. 91 (10) , 4069-4080
A novel computational method for dynamic analysis of flexible sandwich plates undergoing large deformation