Ken Watanabe
Research Subjects
Ken Watanabe has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Ichiro Fujita
Construction Engineering Research Institute, Kobe University, Kobe, Japan
2 shared publications - Makiko Iguchi
(株)ハイドロ総合技術研究
2 shared publications - Hajime Mase1 shared publication
- Kenta Sato
Hydro Technology Institute
1 shared publication Koji Kawasaki
Hydro Technology Institute Co, Ltd, Osaka, JAPAN
1 shared publication- Makoto Hasegawa
Hydro Technology Institute Co., Ltd., Osaka 5306126, Japan
1 shared publication
Latest Publications
- Open Access
- 29 May 2025
- Published by Coastal Engineering Research Council in Coastal Engineering Proceedings
- No. 38,p. 37
PREDICTING ONE-DAY AHEAD WAVE HEIGHTS USING A HYBRID MODEL OF LONG-SHORT TERM MEMORY AND ARTIFICIAL NEURAL NETWORK WITH RESAMPLING METHODS
In Japan, 1 m significant wave height (Hs) is treated as a threshold to make a decision of whether marine construction work for one week later can be carried out or not. Therefore, one-week-ahead wave predictions are critical. NOAA, JMA, and ECMWF forecast global wave information approximately one week ahead, while most marine construction work refers to nearshore wave observations (e.g., NOWPHAS) located along coasts. According to Hara et al. (2019), the accuracy of forecasted global wave heights is insufficient for making the decision for the nearshore marine construction. The present study challenges improving the accuracy of one-day ahead wave heights at Hitachinaka Port, Japan, by developing a framework of the hybrid model of LSTM and ANN with the resampling method to produce datasets for training and validating. In conclusion, the current model is able to predict 24 hrs-ahead wave heights with the normalized root mean square error (NRMSE) of 8.6 percent and the correlation coefficient (CC) of 0.96.
- 29 May 2025
- Published by Coastal Engineering Research Council in Coastal Engineering Proceedings
- No. 38,p. 37
Open AccessPREDICTING ONE-DAY AHEAD WAVE HEIGHTS USING A HYBRID MODEL OF LONG-SHORT TERM MEMORY AND ARTIFICIAL NEURAL NETWORK WITH RESAMPLING METHODS
In Japan, 1 m significant wave height (Hs) is treated as a threshold to make a decision of whether marine construction work for one week later can be carried out or not. Therefore, one-week-ahead wave predictions are critical. NOAA, JMA, and ECMWF forecast global wave information approximately one week ahead, while most marine construction work refers to nearshore wave observations (e.g., NOWPHAS) located along coasts. According to Hara et al. (2019), the accuracy of forecasted global wave heights is insufficient for making the decision for the nearshore marine construction. The present study challenges improving the accuracy of one-day ahead wave heights at Hitachinaka Port, Japan, by developing a framework of the hybrid model of LSTM and ANN with the resampling method to produce datasets for training and validating. In conclusion, the current model is able to predict 24 hrs-ahead wave heights with the normalized root mean square error (NRMSE) of 8.6 percent and the correlation coefficient (CC) of 0.96.
- Open Access
- 1 January 2022
- Published by Japan Society of Civil Engineers in Journal of Japan Society of Civil Engineers, Ser. B1 (Hydraulic Engineering)
- Vol. 78 (2) , I_1183-I_1188
VALIDATION OF AUTOMATIC PARAMETER ESTIMATION METHOD OF MAXIMUM ENTROPY METHOD USING STIV MEASUREMENT VALUES
河川表面流速を計測する非接触型手法による流量算定では,表面計測値に一定の表面流速係数を乗じて区分求積により流量を求めることが通常だが,実際には河川形状等により表面流速係数の変動が想定される.この点を考慮可能な流量推定手法として,最大エントロピー法の概念に基づく鉛直流速分布式を用いた手法が提案されているが,この手法ではエントロピーパラメータMの設定のために1度は横断面の流速分布を測定する必要があり,新規地点への適用に課題がある.本研究では,近年提案されているMの自動推定手法について,画像計測手法であるSTIVの計測値を用いた検証を行った.その結果,複数河川への適用を通して本手法の適用範囲に関する知見が得られ,通常用いられる一定の表面流速係数が不適なケースで,流量推定精度が向上することが示された.
- 1 January 2022
- Published by Japan Society of Civil Engineers in Journal of Japan Society of Civil Engineers, Ser. B1 (Hydraulic Engineering)
- Vol. 78 (2) , I_1183-I_1188
Open AccessVALIDATION OF AUTOMATIC PARAMETER ESTIMATION METHOD OF MAXIMUM ENTROPY METHOD USING STIV MEASUREMENT VALUES
河川表面流速を計測する非接触型手法による流量算定では,表面計測値に一定の表面流速係数を乗じて区分求積により流量を求めることが通常だが,実際には河川形状等により表面流速係数の変動が想定される.この点を考慮可能な流量推定手法として,最大エントロピー法の概念に基づく鉛直流速分布式を用いた手法が提案されているが,この手法ではエントロピーパラメータMの設定のために1度は横断面の流速分布を測定する必要があり,新規地点への適用に課題がある.本研究では,近年提案されているMの自動推定手法について,画像計測手法であるSTIVの計測値を用いた検証を行った.その結果,複数河川への適用を通して本手法の適用範囲に関する知見が得られ,通常用いられる一定の表面流速係数が不適なケースで,流量推定精度が向上することが示された.
- Open Access
- 2 October 2021
- Published by Taylor & Francis in Coastal Engineering Journal
- Vol. 63 (4) , 545-572
Validation of the applicability of the particle-based open-source software DualSPHysics to violent flow fields
Emerging as powerful open-source software in recent years, “DualSPHysics” is receiving increased attention for its ability to simulate large-scale flow fields. In the context of applying open-source software, the differences in the numerical results due to different model parameters need to be investigated in detail. In this study, some benchmark problems have been solved with DualSPHysics to validate the estimation of wave impact pressure with violent breaking waves. We have demonstrated three main results: (i) as an alternative to the artificial viscosity traditionally used in DualSPHysics, a laminar viscosity model can also well reproduce the solutions to the existing benchmark problems in a violent flow field with the modified dynamic boundary condition; (ii) the dynamics of the gas phase is essential in the calculation of wave breaking with rapid gate opening; and (iii) if the density diffusion parameter is too large, the impact pressure may be underestimated. The practical contribution by this study is to find that DualSPHysics well reproduces complex breaking waves, including multi-phase gas-liquid flows, and that the wave impact pressure is accurate by comparison with existing experimental results. This allows us to understand the complex behavior of fluid-structure interactions in coastal engineering by means of DualSPHysics.
- 2 October 2021
- Published by Taylor & Francis in Coastal Engineering Journal
- Vol. 63 (4) , 545-572
Open AccessValidation of the applicability of the particle-based open-source software DualSPHysics to violent flow fields
Emerging as powerful open-source software in recent years, “DualSPHysics” is receiving increased attention for its ability to simulate large-scale flow fields. In the context of applying open-source software, the differences in the numerical results due to different model parameters need to be investigated in detail. In this study, some benchmark problems have been solved with DualSPHysics to validate the estimation of wave impact pressure with violent breaking waves. We have demonstrated three main results: (i) as an alternative to the artificial viscosity traditionally used in DualSPHysics, a laminar viscosity model can also well reproduce the solutions to the existing benchmark problems in a violent flow field with the modified dynamic boundary condition; (ii) the dynamics of the gas phase is essential in the calculation of wave breaking with rapid gate opening; and (iii) if the density diffusion parameter is too large, the impact pressure may be underestimated. The practical contribution by this study is to find that DualSPHysics well reproduces complex breaking waves, including multi-phase gas-liquid flows, and that the wave impact pressure is accurate by comparison with existing experimental results. This allows us to understand the complex behavior of fluid-structure interactions in coastal engineering by means of DualSPHysics.
- Open Access
Improving Accuracy and Robustness of Space-Time Image Velocimetry (STIV) with Deep Learning
Image-based river flow measurement methods have been attracting attention because of their ease of use and safety. Among the image-based methods, the space-time image velocimetry (STIV) technique is regarded as a powerful tool for measuring the streamwise flow because of its high measurement accuracy and robustness. However, depending on the image shooting environment such as stormy weather or nighttime, the conventional automatic analysis methods may generate incorrect values, which has been a problem in building a real-time measurement system. In this study, we tried to solve this problem by incorporating the deep learning method, which has been successful in the field of image analysis in recent years, into the STIV method. The case studies for the three datasets indicated that deep learning can improve the efficiency of the STIV method and can continuously improve performance by learning additional data. The proposed method is suitable for building a real-time measurement system because it has no tuning parameters that need to be adjusted according to the shooting conditions and the calculation speed is fast enough for real-time measurement.
Open AccessImproving Accuracy and Robustness of Space-Time Image Velocimetry (STIV) with Deep Learning
Image-based river flow measurement methods have been attracting attention because of their ease of use and safety. Among the image-based methods, the space-time image velocimetry (STIV) technique is regarded as a powerful tool for measuring the streamwise flow because of its high measurement accuracy and robustness. However, depending on the image shooting environment such as stormy weather or nighttime, the conventional automatic analysis methods may generate incorrect values, which has been a problem in building a real-time measurement system. In this study, we tried to solve this problem by incorporating the deep learning method, which has been successful in the field of image analysis in recent years, into the STIV method. The case studies for the three datasets indicated that deep learning can improve the efficiency of the STIV method and can continuously improve performance by learning additional data. The proposed method is suitable for building a real-time measurement system because it has no tuning parameters that need to be adjusted according to the shooting conditions and the calculation speed is fast enough for real-time measurement.