Fawzi Nashashibi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Fawzi Nashashibi has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Elias Maharmeh
VALEO DAR—Driving Assistance Research, Valeo Mobility Tech Center (VMTC), 6 Rue Daniel Costantini, 94000 Créteil, France
3 shared publications - Paulo Resende
VALEO DAR—Driving Assistance Research, Valeo Mobility Tech Center (VMTC), 6 Rue Daniel Costantini, 94000 Créteil, France
3 shared publications - Dinh-Van Nguyen
Hanoi University of Science and Technology
2 shared publications - Zayed Alsayed
Valeo Mobility Tech Center (VMTC), 6 Rue Daniel Costantini, 94000 Créteil, France
2 shared publications - Abdelaziz Bensrhair
Univ Rouen Normandie, INSA Rouen Normandie, Université Le Havre Normandie, Normandie Univ, LITIS UR 4108, F-76000 Rouen, France
1 shared publication - Alexandrina Rogozan
Normandie Univ, INSA Rouen, LITIS, Rouen, France
1 shared publication
Latest Publications
- 1 November 2026
- Published by Springer Nature
- p. 189-206
Adapting Landmark Geopositioning for Use with Imprecise Maps
- 1 November 2026
- Published by Springer Nature
- p. 189-206
Adapting Landmark Geopositioning for Use with Imprecise Maps
- Open Access
Integrity as a Control Problem: Smooth and Adaptive Protection Levels for Multi-Modal Localization
Protection levels for autonomous vehicle localization are traditionally derived from estimator covariances under Gaussian assumptions. These approaches fail in complex urban environments where sensor anomalies produce heavy-tailed, non-Gaussian error distributions. This paper presents a fundamentally different paradigm that reformulates integrity monitoring as a closed-loop control problem. The method computes an instantaneous error rate from three sources: inertial sensor noise, kinematic drift between filter-based and dead-reckoned displacement, and LiDAR scan-map registration quality weighted by a sensitivity factor. This rate drives a saturation-controlled setpoint dynamics, then an adaptive PID controller with entropy-based gain scheduling produces the final protection level. Asymmetric update laws enforce rapid expansion but cautious contraction of safety bounds. Experiments on three UrbanNavDataset sequences (medium-urban, low-urban, deep-urban) demonstrate that traditional covariance-based methods exhibit high integrity risk, while the proposed framework achieves risk in moderate environments and under extreme degradation. The resulting protection levels are smooth and well-behaved, compatible with modern motion planners. This control-theoretic approach offers a viable alternative to statistical integrity paradigms in challenging real-world conditions.Open AccessIntegrity as a Control Problem: Smooth and Adaptive Protection Levels for Multi-Modal Localization
Protection levels for autonomous vehicle localization are traditionally derived from estimator covariances under Gaussian assumptions. These approaches fail in complex urban environments where sensor anomalies produce heavy-tailed, non-Gaussian error distributions. This paper presents a fundamentally different paradigm that reformulates integrity monitoring as a closed-loop control problem. The method computes an instantaneous error rate from three sources: inertial sensor noise, kinematic drift between filter-based and dead-reckoned displacement, and LiDAR scan-map registration quality weighted by a sensitivity factor. This rate drives a saturation-controlled setpoint dynamics, then an adaptive PID controller with entropy-based gain scheduling produces the final protection level. Asymmetric update laws enforce rapid expansion but cautious contraction of safety bounds. Experiments on three UrbanNavDataset sequences (medium-urban, low-urban, deep-urban) demonstrate that traditional covariance-based methods exhibit high integrity risk, while the proposed framework achieves risk in moderate environments and under extreme degradation. The resulting protection levels are smooth and well-behaved, compatible with modern motion planners. This control-theoretic approach offers a viable alternative to statistical integrity paradigms in challenging real-world conditions. - Open Access
A Comprehensive Survey on the Integrity of Localization Systems
This survey extends and refines the existing definitions of integrity and protection level in localization systems (localization as a broad term, i.e., not limited to GNSS-based localization). In our definition, we study integrity from two aspects: quality and quantity. Unlike existing reviews, this survey examines integrity methods covering various localization techniques and sensors. We classify localization techniques as optimization-based, fusion-based, and SLAM-based. A new classification of integrity methods is introduced, evaluating their applications, effectiveness, and limitations. Comparative tables summarize strengths and gaps across key criteria, such as algorithms, evaluation methods, sensor data, and more. The survey presents a general probabilistic model addressing diverse error types in localization systems. Findings reveal a significant research imbalance: 73.3% of surveyed papers focus on GNSS-based methods, while only 26.7% explore non-GNSS approaches like fusion, optimization, or SLAM, with few addressing protection level calculations. Robust modeling is highlighted as a promising integrity method, combining quantification and qualification to address critical gaps. This approach offers a unified framework for improving localization system reliability and safety. This survey provides key insights for developing more robust localization systems, contributing to safer and more efficient autonomous operations.
Open AccessA Comprehensive Survey on the Integrity of Localization Systems
This survey extends and refines the existing definitions of integrity and protection level in localization systems (localization as a broad term, i.e., not limited to GNSS-based localization). In our definition, we study integrity from two aspects: quality and quantity. Unlike existing reviews, this survey examines integrity methods covering various localization techniques and sensors. We classify localization techniques as optimization-based, fusion-based, and SLAM-based. A new classification of integrity methods is introduced, evaluating their applications, effectiveness, and limitations. Comparative tables summarize strengths and gaps across key criteria, such as algorithms, evaluation methods, sensor data, and more. The survey presents a general probabilistic model addressing diverse error types in localization systems. Findings reveal a significant research imbalance: 73.3% of surveyed papers focus on GNSS-based methods, while only 26.7% explore non-GNSS approaches like fusion, optimization, or SLAM, with few addressing protection level calculations. Robust modeling is highlighted as a promising integrity method, combining quantification and qualification to address critical gaps. This approach offers a unified framework for improving localization system reliability and safety. This survey provides key insights for developing more robust localization systems, contributing to safer and more efficient autonomous operations.
- Open Access
- 18 December 2024
- Published by MDPI AG in Preprints.org
A Comprehensive Survey on the Integrity of Localization Systems
This survey extends and refines the existing definitions of integrity and protection level in localization systems (localization as a broad term, i.e., not limited to GNSS-based localization). In our definition, we study integrity from two aspects: quality and quantity. Unlike existing reviews, this survey examines integrity methods covering various localization techniques and sensors. We classify localization techniques as optimization-based, fusion-based, and SLAM-based. A new classification of integrity methods is introduced, evaluating their applications, effectiveness, and limitations. Comparative tables summarize strengths and gaps across key criteria. The survey presents a general probabilistic model addressing diverse error types in localization systems. Findings reveal a significant research imbalance: 73.3% of surveyed papers focus on GNSS-based methods, while only 26.7% explore non-GNSS approaches like fusion, optimization, or SLAM, with few addressing protection level calculations. Robust modeling is highlighted as a promising integrity method, combining quantification and qualification to address critical gaps. This approach offers a unified framework for improving localization system reliability and safety. This survey provides key insights for developing more robust localization systems, contributing to safer and more efficient autonomous operations.
- 18 December 2024
- Published by MDPI AG in Preprints.org
Open AccessA Comprehensive Survey on the Integrity of Localization Systems
This survey extends and refines the existing definitions of integrity and protection level in localization systems (localization as a broad term, i.e., not limited to GNSS-based localization). In our definition, we study integrity from two aspects: quality and quantity. Unlike existing reviews, this survey examines integrity methods covering various localization techniques and sensors. We classify localization techniques as optimization-based, fusion-based, and SLAM-based. A new classification of integrity methods is introduced, evaluating their applications, effectiveness, and limitations. Comparative tables summarize strengths and gaps across key criteria. The survey presents a general probabilistic model addressing diverse error types in localization systems. Findings reveal a significant research imbalance: 73.3% of surveyed papers focus on GNSS-based methods, while only 26.7% explore non-GNSS approaches like fusion, optimization, or SLAM, with few addressing protection level calculations. Robust modeling is highlighted as a promising integrity method, combining quantification and qualification to address critical gaps. This approach offers a unified framework for improving localization system reliability and safety. This survey provides key insights for developing more robust localization systems, contributing to safer and more efficient autonomous operations.
- Open Access
COR-MP: Conservation of Resources Model for Maneuver Planning
Decision-making for automated driving remains a challenging task. For their integration into real platforms, these algorithms must guarantee passenger safety and comfort while ensuring interpretability and an appropriate computational time. To model and solve this decision-making problem, we have developed a novel approach called COR-MP (Conservation of Resources model for Maneuver Planning). This model is based on the Conservation of Resources theory, a psychological concept applied to human behavior. COR-MP is based on various driving parameters, such as comfort, safety, or energy, and provides in real-time a profit value that enables us to quantify the impact of a decision on the decision-maker. Our method has been tested and validated through closed-loop simulations using RTMaps middleware, and preliminary results have been obtained by testing COR-MP on a real vehicle.
Open AccessCOR-MP: Conservation of Resources Model for Maneuver Planning
Decision-making for automated driving remains a challenging task. For their integration into real platforms, these algorithms must guarantee passenger safety and comfort while ensuring interpretability and an appropriate computational time. To model and solve this decision-making problem, we have developed a novel approach called COR-MP (Conservation of Resources model for Maneuver Planning). This model is based on the Conservation of Resources theory, a psychological concept applied to human behavior. COR-MP is based on various driving parameters, such as comfort, safety, or energy, and provides in real-time a profit value that enables us to quantify the impact of a decision on the decision-maker. Our method has been tested and validated through closed-loop simulations using RTMaps middleware, and preliminary results have been obtained by testing COR-MP on a real vehicle.
- 1 October 2021
- Published by Elsevier in Control Engineering Practice
- Vol. 115
Youla–Kucera based multi-objective car following controller
- 1 October 2021
- Published by Elsevier in Control Engineering Practice
- Vol. 115
Youla–Kucera based multi-objective car following controller
- Top Cited Papers
- 1 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Vehicles
- Vol. 6 (1) , 175-185
Attention Based Vehicle Trajectory Prediction
Self-driving vehicles need to continuously analyse the driving scene, understand the behavior of other road users and predict their future trajectories in order to plan a safe motion and reduce their reaction time. Motivated by this idea, this paper addresses the problem of vehicle trajectory prediction over an extended horizon. On highways, human drivers continuously adapt their speed and paths according to the behavior of their neighboring vehicles. Therefore, vehicles' trajectories are very correlated and considering vehicle interactions makes motion prediction possible even before the start of a clear maneuver pattern. To this end, we introduce and analyze trajectory prediction methods based on how they model the vehicles interactions. Inspired by human reasoning, we use an attention mechanism that explicitly highlights the importance of neighboring vehicles with respect to their future states. We go beyond pairwise vehicle interactions and model higher order interactions. Moreover, the existence of different goals and driving behaviors induces multiple potential futures. We exploit a combination of global and partial attention paid to surrounding vehicles to generate different possible trajectory. Experiments on highway datasets show that the proposed model outperforms the state-of-the-art performances.
- 1 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Vehicles
- Vol. 6 (1) , 175-185
Top Cited PapersAttention Based Vehicle Trajectory Prediction
Self-driving vehicles need to continuously analyse the driving scene, understand the behavior of other road users and predict their future trajectories in order to plan a safe motion and reduce their reaction time. Motivated by this idea, this paper addresses the problem of vehicle trajectory prediction over an extended horizon. On highways, human drivers continuously adapt their speed and paths according to the behavior of their neighboring vehicles. Therefore, vehicles' trajectories are very correlated and considering vehicle interactions makes motion prediction possible even before the start of a clear maneuver pattern. To this end, we introduce and analyze trajectory prediction methods based on how they model the vehicles interactions. Inspired by human reasoning, we use an attention mechanism that explicitly highlights the importance of neighboring vehicles with respect to their future states. We go beyond pairwise vehicle interactions and model higher order interactions. Moreover, the existence of different goals and driving behaviors induces multiple potential futures. We exploit a combination of global and partial attention paid to surrounding vehicles to generate different possible trajectory. Experiments on highway datasets show that the proposed model outperforms the state-of-the-art performances.
- Open Access
- 20 May 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 99729-99739
A Fusion Method for Localization of Intelligent Vehicles in Carparks
With the increasing demand for urban space, more and more multistory carparks are needed as they will play a central role in the city transportation system. An autonomous navigation solution for Intelligent Vehicles in these indoor scenarios is then required. One step to solve this problem is to localize Intelligent Vehicles in these specific environments. However, the lack of GPS due to signal obstruction (multipath, non-line of sight, interference, etc.) appears to be a significant concern for any localization system, let alone indoor ones. Hence, in this paper, a wireless sensor network based approach is proposed to replace the GPS (Global Positioning System) role for indoor environments. In addition, a fusion framework for multiple sensors such as Wi-Fi access points, Inertial Measurement Unit (IMU) or LiDAR is studied. Experiments in almost one-year duration yield a stable result of mean global localization error at 0.5m.
- 20 May 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 99729-99739
Open AccessA Fusion Method for Localization of Intelligent Vehicles in Carparks
With the increasing demand for urban space, more and more multistory carparks are needed as they will play a central role in the city transportation system. An autonomous navigation solution for Intelligent Vehicles in these indoor scenarios is then required. One step to solve this problem is to localize Intelligent Vehicles in these specific environments. However, the lack of GPS due to signal obstruction (multipath, non-line of sight, interference, etc.) appears to be a significant concern for any localization system, let alone indoor ones. Hence, in this paper, a wireless sensor network based approach is proposed to replace the GPS (Global Positioning System) role for indoor environments. In addition, a fusion framework for multiple sensors such as Wi-Fi access points, Inertial Measurement Unit (IMU) or LiDAR is studied. Experiments in almost one-year duration yield a stable result of mean global localization error at 0.5m.
- Open Access
- 26 March 2020
- Published by MDPI AG in Electronics
- Vol. 9 (4) , 551
Speed Control Optimization for Autonomous Vehicles with Metaheuristics
The development of speed controllers under execution in autonomous vehicles within their dynamic driving task (DDT) is a traditional research area from the point of view of control techniques. In this regard, Proportional – Integral – Derivative (PID) controllers are the most widely used in order to meet the requirements of cruise control. However, fine tuning of the parameters associated with this type of controller can be complex, especially if it is intended to optimize them and reduce their characteristic errors. The objective of the work described in this paper is to evaluate the capacity of several metaheuristics for the adjustment of the parameters Kp, 1/Ti, and 1/Td of a PID controller to regulate the speed of a vehicle. To do this, an adjustment error function has been established from a linear combination of classic estimators of the goodness of the controller, such as overshoot, settling time (ts), steady-state error (ess), and the number of changes of sign of the signal (d). The error obtained when applying the controller has also been compared to a computational model of the vehicle after estimating the parameters Kp, Ki, and Kd, both for a setpoint sequence used in the adjustment of the system parameters and for a sequence not used during the adjustment, and therefore unknown by the system. The main novelty of the paper is to propose a new global error function, a function that enables the use of heuristic optimization methods for PID tuning. This optimization has been carried out by using three methods: genetic algorithms (GA), memetics algorithms (MA), and mesh adaptive direct search (MADS). The results of the application of the optimization methods using the proposed metric show that the accuracy of the PID controller is improved, compared with the classical optimization based on classical methods like the integral absolute error (IAE) or similar metrics, reducing oscillatory behaviours as well as minimizing the analysed performance indexes.
- 26 March 2020
- Published by MDPI AG in Electronics
- Vol. 9 (4) , 551
Open AccessSpeed Control Optimization for Autonomous Vehicles with Metaheuristics
The development of speed controllers under execution in autonomous vehicles within their dynamic driving task (DDT) is a traditional research area from the point of view of control techniques. In this regard, Proportional – Integral – Derivative (PID) controllers are the most widely used in order to meet the requirements of cruise control. However, fine tuning of the parameters associated with this type of controller can be complex, especially if it is intended to optimize them and reduce their characteristic errors. The objective of the work described in this paper is to evaluate the capacity of several metaheuristics for the adjustment of the parameters Kp, 1/Ti, and 1/Td of a PID controller to regulate the speed of a vehicle. To do this, an adjustment error function has been established from a linear combination of classic estimators of the goodness of the controller, such as overshoot, settling time (ts), steady-state error (ess), and the number of changes of sign of the signal (d). The error obtained when applying the controller has also been compared to a computational model of the vehicle after estimating the parameters Kp, Ki, and Kd, both for a setpoint sequence used in the adjustment of the system parameters and for a sequence not used during the adjustment, and therefore unknown by the system. The main novelty of the paper is to propose a new global error function, a function that enables the use of heuristic optimization methods for PID tuning. This optimization has been carried out by using three methods: genetic algorithms (GA), memetics algorithms (MA), and mesh adaptive direct search (MADS). The results of the application of the optimization methods using the proposed metric show that the accuracy of the PID controller is improved, compared with the classical optimization based on classical methods like the integral absolute error (IAE) or similar metrics, reducing oscillatory behaviours as well as minimizing the analysed performance indexes.