Mohd Azman Zakariya
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Mohd Azman Zakariya has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Ashraful Haque
Department of Electrical and Electronic Engineering Daffodil International University Dhaka Bangladesh
3 shared publications - Liton Chandra Paul
Department of Electrical, Electronic and Communication Engineering, Pabna University of Science and Technology, Pabna, Bangladesh
3 shared publications - Narinderjit Singh Sawaran Singh
Faculty of Data Science and Information Technology, INTI International University, Persiaran Perdana BBN, Putra Nilai, Nilai 71800, Malaysia
2 shared publications Afzalur Rahman
Space Science Centre, Climate Change Institute, Universiti Kebangsaan Malaysia (UKM), 43600, Bangi, Malaysia
1 shared publication- Afzalur Rahman
Department of Electrical and Electronic Engineering, Daffodil International University, Dhaka 1341, Bangladesh
1 shared publication - Ali Alhazmi
Department of Computer Science, College of Engineering and Computer Science, Jazan University, Jazan 45142, Saudi Arabia
1 shared publication
Latest Publications
- Open Access
- 1 June 2023
- Published by Institute of Advanced Engineering and Science in Bulletin of Electrical Engineering and Informatics
- Vol. 12 (3) , 1560-1569
Investigation of coupling loss caused by misalignment in optical fiber
In a fiber optic communication system, optical fiber is used as a transmission medium consisting of a flexible filament that guides the optical signal to be transmitted from the transmitter to the receiver or vice versa. Like any other communication medium, the optical fiber cable faces some losses that can be caused by the material and length of the fiber. One of the main reasons for losses in optical communication systems is misalignment during the fiber to fiber joining process. This type of loss is also known as coupling loss, which is caused by an imperfect physical connection between two fibers. The coupling losses are most often caused by three misalignment issues: end gap displacement, lateral displacement, and angular displacement. The main goal of this article is to investigate coupling loss caused by misalignment in optical fiber using the Modicom 6 module. Before we can find a way to reduce the coupling losses in the fiber optic system, we need to have a concrete idea about the nature of coupling losses due to misalignment. An ideal fiber coupler should not lose light and should be insensitive to light dispersion.
- 1 June 2023
- Published by Institute of Advanced Engineering and Science in Bulletin of Electrical Engineering and Informatics
- Vol. 12 (3) , 1560-1569
Open AccessInvestigation of coupling loss caused by misalignment in optical fiber
In a fiber optic communication system, optical fiber is used as a transmission medium consisting of a flexible filament that guides the optical signal to be transmitted from the transmitter to the receiver or vice versa. Like any other communication medium, the optical fiber cable faces some losses that can be caused by the material and length of the fiber. One of the main reasons for losses in optical communication systems is misalignment during the fiber to fiber joining process. This type of loss is also known as coupling loss, which is caused by an imperfect physical connection between two fibers. The coupling losses are most often caused by three misalignment issues: end gap displacement, lateral displacement, and angular displacement. The main goal of this article is to investigate coupling loss caused by misalignment in optical fiber using the Modicom 6 module. Before we can find a way to reduce the coupling losses in the fiber optic system, we need to have a concrete idea about the nature of coupling losses due to misalignment. An ideal fiber coupler should not lose light and should be insensitive to light dispersion.
- Open Access
- 1 June 2023
- Published by Institute of Advanced Engineering and Science in Bulletin of Electrical Engineering and Informatics
- Vol. 12 (3) , 1513-1522
Parametric study of a dual-band quasi-Yagi antenna for LTE application
Due to small size and lightweight properties, the development of microstrip (MS) patch antennas for wireless communication has become one of the mobile application devices in demand in recent years. This has helped to reduce reliance on wired cables. In this paper, a study has been performed on MS antenna by developing a quasi-Yagi structure on a fire retardant-4 (FR-4) substrate with a MS to coplanar strip line (CPS) transition feeding technique. The antenna is designed by using computer simulation technology (CST) to achieve the desired resonant frequency and bandwidth. The proposed dual band quasi-Yagi antenna has impedance bandwidths of approximately 0.3 GHz and 0.22 GHz resonating at 1.80 GHz and 2.60 GHz, respectively, which makes it suitable for long-term evolution (LTE) applications. Eight-director elements in four pairs are constructed to achieve directivity with magnitudes of 6 dB and 8.3 dBi at both resonant frequencies, 1.80 GHz and 2.60 GHz, respectively. Different parametric studies have also been performed to characterize the antenna radiation characteristics. The return loss, voltage standing wave ratio (VSWR), front to back (F/B) ratio and far-field radiation are analyzed and discussed.
- 1 June 2023
- Published by Institute of Advanced Engineering and Science in Bulletin of Electrical Engineering and Informatics
- Vol. 12 (3) , 1513-1522
Open AccessParametric study of a dual-band quasi-Yagi antenna for LTE application
Due to small size and lightweight properties, the development of microstrip (MS) patch antennas for wireless communication has become one of the mobile application devices in demand in recent years. This has helped to reduce reliance on wired cables. In this paper, a study has been performed on MS antenna by developing a quasi-Yagi structure on a fire retardant-4 (FR-4) substrate with a MS to coplanar strip line (CPS) transition feeding technique. The antenna is designed by using computer simulation technology (CST) to achieve the desired resonant frequency and bandwidth. The proposed dual band quasi-Yagi antenna has impedance bandwidths of approximately 0.3 GHz and 0.22 GHz resonating at 1.80 GHz and 2.60 GHz, respectively, which makes it suitable for long-term evolution (LTE) applications. Eight-director elements in four pairs are constructed to achieve directivity with magnitudes of 6 dB and 8.3 dBi at both resonant frequencies, 1.80 GHz and 2.60 GHz, respectively. Different parametric studies have also been performed to characterize the antenna radiation characteristics. The return loss, voltage standing wave ratio (VSWR), front to back (F/B) ratio and far-field radiation are analyzed and discussed.
- Open Access
- 19 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 105012-105047
ZnO Based Resistive Random Access Memory Device: A Prospective Multifunctional Next-Generation Memory
Numerous works that have demonstrated the study and enhancement of switching properties of ZnO-based RRAM devices are discussed. Several native point defects that have a direct or indirect effect on ZnO are discussed. The use of doping elements, multi-layered structures, suitable bottom and top electrodes, controlling the deposition materials, and the impact of hybrid structure for enhancing the switching dynamics are discussed. The potentials of ZnO-based RRAM for invisible and bendable devices are also covered. ZnO-based RRAM has the potential for possible application in bio-inspired cognitive computational systems. Thus, the synapse capability of ZnO is presented. The sneak-path current issue also besets ZnO-based RRAM crossbar array architecture. Hence, various attempts to subdue the bottleneck have been shown and discussed in this article. Interestingly, ZnO provides not only helpful memory features. However, it demonstrates the ability to be used in nonvolatile multifunctional memory devices. Also, this review covers various issues like the effect of electrodes, interfacial layers, proper switching layers, appropriate fabrication techniques, and proper annealing settings. These may offer a valuable understanding of the study and development of ZnO-based RRAM and should be an avenue for overcoming RRAM challenges.
- 19 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 105012-105047
Open AccessZnO Based Resistive Random Access Memory Device: A Prospective Multifunctional Next-Generation Memory
Numerous works that have demonstrated the study and enhancement of switching properties of ZnO-based RRAM devices are discussed. Several native point defects that have a direct or indirect effect on ZnO are discussed. The use of doping elements, multi-layered structures, suitable bottom and top electrodes, controlling the deposition materials, and the impact of hybrid structure for enhancing the switching dynamics are discussed. The potentials of ZnO-based RRAM for invisible and bendable devices are also covered. ZnO-based RRAM has the potential for possible application in bio-inspired cognitive computational systems. Thus, the synapse capability of ZnO is presented. The sneak-path current issue also besets ZnO-based RRAM crossbar array architecture. Hence, various attempts to subdue the bottleneck have been shown and discussed in this article. Interestingly, ZnO provides not only helpful memory features. However, it demonstrates the ability to be used in nonvolatile multifunctional memory devices. Also, this review covers various issues like the effect of electrodes, interfacial layers, proper switching layers, appropriate fabrication techniques, and proper annealing settings. These may offer a valuable understanding of the study and development of ZnO-based RRAM and should be an avenue for overcoming RRAM challenges.