Nghia Nguyen-Trong
Research Subjects
Nghia Nguyen-Trong has a total of 105 co-authors. Here are the top co-authors by number of shared publications:
- Christophe Fumeaux
The University of Queensland
47 shared publications - Amin M. Abbosh
The University of Queensland
27 shared publications - Son Xuat Ta
School of Electrical and Electronic Engineering, Hanoi University of Science and Technology, Hanoi, Vietnam
17 shared publications - Khac Kiem Nguyen
School of Electrical and Electronic Engineering, Hanoi University of Science and Technology, Hanoi, Vietnam
13 shared publications Leonard Hall
Defence Science and Technology Group (DSTG) Edinburgh South Australia Australia
13 shared publications- Huy Hung Tran
Phenikaa University
11 shared publications
Latest Publications
- 10 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. PP (15361225) , 1-5
A 3D-Printed Circularly-Polarized Grounded Dielectric Slab Holographic Antenna
A 3D-printed, right-hand circularly polarized holographic antenna with isotropic, height-modulated unit cells is presented. We demonstrate that high-permittivity dielectric filaments such as Preperm ABS1200 can be employed to produce high impedance surface-wave interference structures. A standard unit cell modelling method is applied to accurately characterize grounded dielectric unit cells which, combined with a spatially phase shifted linearly polarized interference pattern, form the basis of an antenna launching circularly-polarized radiation. To validate the concept, a 3D-printed antenna with 16 dBi realized gain with a 9.1% bandwidth at a main beam angle of 6$^\circ$ from broadside is demonstrated.
- 10 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. PP (15361225) , 1-5
A 3D-Printed Circularly-Polarized Grounded Dielectric Slab Holographic Antenna
A 3D-printed, right-hand circularly polarized holographic antenna with isotropic, height-modulated unit cells is presented. We demonstrate that high-permittivity dielectric filaments such as Preperm ABS1200 can be employed to produce high impedance surface-wave interference structures. A standard unit cell modelling method is applied to accurately characterize grounded dielectric unit cells which, combined with a spatially phase shifted linearly polarized interference pattern, form the basis of an antenna launching circularly-polarized radiation. To validate the concept, a 3D-printed antenna with 16 dBi realized gain with a 9.1% bandwidth at a main beam angle of 6$^\circ$ from broadside is demonstrated.
- 12 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (7) , 7142-7147
Series-Fed Patch Array With Dual-Circularly Polarized 2-D Tracking and Polarimetry Functionality
A multi-port circularly polarized series-fed patch array is presented for sum and difference-beam generation. The design has the capability of 2-dimensional (2D) tracking with dual circular polarization (CP). Due to the fact that the phase center in both operation modes is collocated, the antenna is also capable of generating linear polarization (LP) with arbitrary orientation, thus providing polarimetric capability. Measurement results confirm that a 5-GHz antenna prototype can provide 2D tracking functionality with dual CP operation. The overlapping bandwidth with -10-dB reflection coefficient and 15-dB isolation among all ports is 4.4%. The maximum realized sum and difference gain is about 15.8 dBiC and 13.5 dBiC, respectively.
- 12 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (7) , 7142-7147
Series-Fed Patch Array With Dual-Circularly Polarized 2-D Tracking and Polarimetry Functionality
A multi-port circularly polarized series-fed patch array is presented for sum and difference-beam generation. The design has the capability of 2-dimensional (2D) tracking with dual circular polarization (CP). Due to the fact that the phase center in both operation modes is collocated, the antenna is also capable of generating linear polarization (LP) with arbitrary orientation, thus providing polarimetric capability. Measurement results confirm that a 5-GHz antenna prototype can provide 2D tracking functionality with dual CP operation. The overlapping bandwidth with -10-dB reflection coefficient and 15-dB isolation among all ports is 4.4%. The maximum realized sum and difference gain is about 15.8 dBiC and 13.5 dBiC, respectively.
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- p. 1
Fusion-Based Frequency-Reconfigurable Monopole Filtering Antenna with Single-Bias Control
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- p. 1
Open AccessFusion-Based Frequency-Reconfigurable Monopole Filtering Antenna with Single-Bias Control
- 12 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (2) , 911-915
Wideband High-Isolation Dual-Circularly Polarized Co-Aperture Antenna Using Nonuniform Parasitic Elements
This paper proposes an approach to improve performance of a dual-circularly polarized (CP) patch using non uniform parasitic elements. To overcome the limited operating bandwidth and poor isolation of the conventional dual-CP patch, multiple parasitic elements are used to produce additional resonance to improve the operating bandwidth. Interestingly, the capacitive couple between the patch and the parasitic elements also introduces a new coupling path flowing on the parasitic elements, which is opposite to the original coupling path between two ports. A weak-field area is therefore generated, and the isolation is improved. It is also worth noting that by using non-uniform parasitic elements, wide isolation bandwidth can be attained. The fabricated antenna prototype with overall dimensions of 0.83 λ × 0.83 λ × 0.03 λ has measured operating bandwidth of 17.8% (5.1– 6.1 GHz). Across this band, the isolation is always higher than 20 dB, and the broadside gain is from 5.2 to 7.6 dBi.
- 12 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (2) , 911-915
Wideband High-Isolation Dual-Circularly Polarized Co-Aperture Antenna Using Nonuniform Parasitic Elements
This paper proposes an approach to improve performance of a dual-circularly polarized (CP) patch using non uniform parasitic elements. To overcome the limited operating bandwidth and poor isolation of the conventional dual-CP patch, multiple parasitic elements are used to produce additional resonance to improve the operating bandwidth. Interestingly, the capacitive couple between the patch and the parasitic elements also introduces a new coupling path flowing on the parasitic elements, which is opposite to the original coupling path between two ports. A weak-field area is therefore generated, and the isolation is improved. It is also worth noting that by using non-uniform parasitic elements, wide isolation bandwidth can be attained. The fabricated antenna prototype with overall dimensions of 0.83 λ × 0.83 λ × 0.03 λ has measured operating bandwidth of 17.8% (5.1– 6.1 GHz). Across this band, the isolation is always higher than 20 dB, and the broadside gain is from 5.2 to 7.6 dBi.
- 26 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Electromagnetics, RF and Microwaves in Medicine and Biology
- Vol. 10 (1) , 25-34
Mitigating Mesh-Induced Errors in Time-Domain Simulation of Medical Microwave Imaging
With the rapid development of medical microwave imaging systems, their accurate simulation becomes important to ensure the reliability of the developed hardware and software before moving to clinical tests. This is particularly important when using machine learning techniques that require a large volume of simulated data for training. Since the target responses in medical microwave imaging are quite weak, the numerical errors and variations caused by different meshing used in numerical simulations most likely mask the target response; thus, interfering with the pattern of the simulated dataset and resulting in misleading results. Since most available bio-models are voxel-based and can only be meshed using hexahedra, this article focuses on time-domain solvers that use hexahedral meshing. It investigates numerical modeling errors caused by mesh variations in realistic three-dimensional (3D) simulations, their impact on data distribution for machine learning algorithms, and the trade-off between convergence and total simulation time. A realistic 3D microwave head imaging system is used as an example. A delta-simulation approach is presented to eliminate data variations in the constructed dataset caused by inconsistent mesh distributions across simulated cases. The kernel principal component analysis and k-means clustering techniques are used to evaluate the proposed approach. The assessments show that the proposed delta-simulation method can generate a dataset with a more informative data distribution, thereby facilitating subsequent machine learning algorithms. In addition, the delta-simulation balances accuracy and efficiency by maintaining an acceptable number of mesh elements that can be simulated in a reasonable time.
- 26 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Electromagnetics, RF and Microwaves in Medicine and Biology
- Vol. 10 (1) , 25-34
Mitigating Mesh-Induced Errors in Time-Domain Simulation of Medical Microwave Imaging
With the rapid development of medical microwave imaging systems, their accurate simulation becomes important to ensure the reliability of the developed hardware and software before moving to clinical tests. This is particularly important when using machine learning techniques that require a large volume of simulated data for training. Since the target responses in medical microwave imaging are quite weak, the numerical errors and variations caused by different meshing used in numerical simulations most likely mask the target response; thus, interfering with the pattern of the simulated dataset and resulting in misleading results. Since most available bio-models are voxel-based and can only be meshed using hexahedra, this article focuses on time-domain solvers that use hexahedral meshing. It investigates numerical modeling errors caused by mesh variations in realistic three-dimensional (3D) simulations, their impact on data distribution for machine learning algorithms, and the trade-off between convergence and total simulation time. A realistic 3D microwave head imaging system is used as an example. A delta-simulation approach is presented to eliminate data variations in the constructed dataset caused by inconsistent mesh distributions across simulated cases. The kernel principal component analysis and k-means clustering techniques are used to evaluate the proposed approach. The assessments show that the proposed delta-simulation method can generate a dataset with a more informative data distribution, thereby facilitating subsequent machine learning algorithms. In addition, the delta-simulation balances accuracy and efficiency by maintaining an acceptable number of mesh elements that can be simulated in a reasonable time.
- Open Access
- 29 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 6 (1) , 201-211
Dual-Band Circularly-Polarized Transparent GNSS Antenna for Vehicular Applications
A dual-band circularly-polarized transparent antenna for Global Navigation Satellite System (GNSS) is proposed. The antenna is designed with resonance frequencies centered at 1176 MHz and 1582 MHz, targeting the simultaneous coverage of the L5 and L1 bands. Aiming at integration into the glass sun-roof of a vehicle, the antenna is designed using an unperturbed single-substrate layer, i.e., without any via or probe feed. A fine metal mesh based on printed copper is used to achieve around 90% transparency while maintaining satisfactory antenna gain and radiation efficiency within both operation bands. The phenomenon of frequency shifting observed when converting a solid metal-layer antenna to a metal-mesh antenna is thoroughly analyzed and investigated, to assist in speeding up the antenna optimization. The proposed design is fabricated and measured to validate the design concepts.
- 29 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 6 (1) , 201-211
Open AccessDual-Band Circularly-Polarized Transparent GNSS Antenna for Vehicular Applications
A dual-band circularly-polarized transparent antenna for Global Navigation Satellite System (GNSS) is proposed. The antenna is designed with resonance frequencies centered at 1176 MHz and 1582 MHz, targeting the simultaneous coverage of the L5 and L1 bands. Aiming at integration into the glass sun-roof of a vehicle, the antenna is designed using an unperturbed single-substrate layer, i.e., without any via or probe feed. A fine metal mesh based on printed copper is used to achieve around 90% transparency while maintaining satisfactory antenna gain and radiation efficiency within both operation bands. The phenomenon of frequency shifting observed when converting a solid metal-layer antenna to a metal-mesh antenna is thoroughly analyzed and investigated, to assist in speeding up the antenna optimization. The proposed design is fabricated and measured to validate the design concepts.
- 21 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (9) , 2658-2662
A Simple Polarization-Reconfigurable Series-Fed Patch Array Using Switchable Feeding Network
This paper presents a polarization-reconfigurable series-fed patch antenna (SFPA) with high gain and a simple switching mechanism. The proposed design comprises of four slotted circular patches arranged in a 1 × 4 configuration. For excitation, the array is capacitive fed by a single T-junction power divider. By controlling the bias state of three PIN diodes on the divider, the antenna's polarization can be switched among a single linear and dual-sense circular polarization. To validate the design concept, an array prototype is fabricated and measured at the operating frequency of 5.0 GHz. The measurements result in a common operating bandwidth for all radiating modes of about 1.8%, ranging from 4.95 to 5.04 GHz. Besides, a stable broadside gain of around 12 dBi is also obtained.
- 21 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (9) , 2658-2662
A Simple Polarization-Reconfigurable Series-Fed Patch Array Using Switchable Feeding Network
This paper presents a polarization-reconfigurable series-fed patch antenna (SFPA) with high gain and a simple switching mechanism. The proposed design comprises of four slotted circular patches arranged in a 1 × 4 configuration. For excitation, the array is capacitive fed by a single T-junction power divider. By controlling the bias state of three PIN diodes on the divider, the antenna's polarization can be switched among a single linear and dual-sense circular polarization. To validate the design concept, an array prototype is fabricated and measured at the operating frequency of 5.0 GHz. The measurements result in a common operating bandwidth for all radiating modes of about 1.8%, ranging from 4.95 to 5.04 GHz. Besides, a stable broadside gain of around 12 dBi is also obtained.