Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Hector Espinoza has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Simulation of fully developed laminar free convection flow between vertical parallel flat plates

    by Héctor Espinoza-Roman

    This study presents a numerical investigation of laminar free convection between vertical parallel plates with asymmetric uniform wall temperatures. The right wall is maintained at a higher temperature than the left. Fluid enters the channel at a temperature less than or equal to the cooler wall. Using the finite volume method in OpenFOAM v13, the governing equations are solved and validated against classical analytical solutions. A systematic grid convergence study ensures spatial independence. Results show that while the linear temperature profile is accurately captured on coarse grids, the cubic velocity profile requires higher resolution for precision. The findings validate the numerical methodology and offer critical insights into mesh requirements for accurately simulating fully developed natural convection flows in vertical channels.

  • Open Access

    Hybrid Modeling and Control of a Buck-Boost Converter with Parallel-Series Inductor Dynamics

    by Sergio Rojas-Yanten, Hector Espinoza-Roman

    This paper presents the event-driven modeling and simulation of a DC/DC Buck-Boost converter that operates through parallel charging and series discharging of its inductors. Treated as a hybrid system with three physically realizable topologies, the model captures the complete switching dynamics through zero-crossing detection, overcoming the limitations of the conventional averaged model. Three control schemes are implemented and compared open-loop with pulse-width modulation (PWM), peak current mode control (PCMC), and PCMC with proportional-integral control and compensation ramp (PCMC-PI). The results, validated against specialized commercial software, demonstrate the correct operation of the converter and its model, which can be implemented in various applications where voltage amplification requires values up to 100 V. The model constitutes the basis for, as an example, a modular solar battery charging system with maximum power point tracking, which is proposed in future work.

  • Open Access

    Simulation of fully developed laminar free convection flow between vertical parallel flat plates

    by Hector Espinoza-Roman

    This study presents a numerical investigation of laminar free convection flow between vertical parallel flat plates subjected to asymmetric uniform wall temperatures. The left and right walls are maintained at constant but different temperatures, with the right wall being hotter. A fluid at a uniform temperature, less than or equal to the cooler left wall temperature, enters the channel. The governing equations are solved using the finite volume method in OpenFOAM v13. A grid convergence study is conducted using systematically refined meshes to ensure the spatial independence of the results. The numerical solutions demonstrate excellent agreement with classical analytical profiles for fully developed flow. The linear analytical temperature profile is accurately captured even on coarser grids. In contrast, the cubic velocity profile requires more grid resolution to be precisely reproduced. The results validate the numerical methodology and provide insight into the mesh requirements for accurately simulating such natural convection flows.

    • 10 October 2025
    • Published by HAL in HAL
    Open Access

    Simulation of fully developed laminar free convection flow between vertical parallel flat plates

    by Hector G Espinoza-Roman, Hector G Espinoza, Comptes Rendus

    This article presents a numerical simulation of the fully developed laminar free convection flow between vertical parallel plates with asymetric temperatures. The thermal boundary condition employed on the walls is of the type uniform wall temperature, with the left wall cooler and the right wall hotter. At the inlet, a uniform temperature is imposed, which is lower than or equal to the cooler (left) wall temperature. The simulation tool used is OpenFOAM v12. Three successively refined meshes where used to perform mesh sensitivity analysis and to show mesh convergence. The numerical solutions obtained approach asymtotically the analytical solution. The temperature profile, as the analytical solution is linear, is exactly reproduced by the numerical method even in coarse meshes. The velocity profile, as the analytical solution is cubic, is progresively reproduced by the numerical method as the mesh is refined.

  • Open Access

    Laminar flow simulation in square cross-section duct using OpenFOAM

    by Hector Espinoza

    This case study is motivated by the need of having a very simple case that can be simulated in a computational fluid dynamics software. The requirement of the flow case is to have a known exact solution in order to compare with the simulation results. The objective is to simulate the flow using OpenFOAM and to compare the results of the simulation with the exact solution. The simulation was done following the classical computational fluid dynamics workflow: geometry generation, boundary condition imposition, meshing, solving and post-processing. The simulation was performed for three different meshes. Finally, the computational results were compared with the analytical solution. The simulation yielded the velocity profile for fully developed flow, the pressure profile in the longitudinal direction, and the pressure variation per unit length. The results are in agreement with the exact solution of the flow. Therefore, OpenFOAM was able to simulate accurately the flow in terms of velocity and pressure.

  • Open Access

    Sustainable Engineering through Open Hardware and Digital Fabrication

    by Hector Espinoza

    This article explores the convergence of sustainable engineering, open hardware, and digital fabrication as a transformative approach to addressing global challenges. It examines how open hardware principles, such as modular design and accessible blueprints, enable a circular economy, reduce waste, and promote localized manufacturing, aligning with sustainable engineering goals. The integration of digital fabrication techniques, including digital twins and 3D printing, enhances resource efficiency, enables customized solutions, and supports data-driven decision-making. Real-world examples, from sustainable engineering education to plastic waste recycling, highlight the practical applications and potential of this integrated approach. By embracing these principles, future engineers can develop sustainable solutions that benefit both society and the environment. This review emphasizes the importance of aligning technological advancements with sustainability to foster a more resilient and equitable future.

  • Open Access

    COMPARACIÓN DE MÉTODOS DE SOLUCIÓN DE LA ECUACIÓN DE PRESIÓN EN FLUJO INCOMPRESIBLE EN OPENFOAM

    by Hector G. Espinoza-Román

    En el presente trabajo de investigación se comparan varios métodos de solución para la ecuación de presión para un caso de flujo incompresible. El objetivo es medir el tiempo de cálculo y la memoria de trabajo requerida por cada método para determinar cuál de los métodos de solución funciona mejor para un caso de flujo en estado estable e incompresible. Se analizan seis métodos de solución: Cholesky incompleto diagonal (DIC), Cholesky incompleto diagonal rápido (FDIC), Gauss-Seidel, Gauss-Seidel simétrico, Cholesky incompleto diagonal combinado con Gauss-Seidel (DICGaussSeidel) y Gauss-Seidel no-bloqueante. Se utiliza el tutorial airFoil2D como problema modelo. Se trabaja con la malla original del tutorial y con una malla refinada basada en la original. Se determina que el mejor método en términos de tiempo de cálculo es el método FDIC. En cuanto a memoria requerida, todos los métodos tienen requerimientos similares.

  • Open Access

    Laminar Flow Simulation Between Parallel Flat Plates using OpenFOAM

    by Hector Espinoza-Roman, Juan Cuellar-Mendoza, Libis Valdez-Cervantes

    Internal flow is a type of flow present in many industrial applications. A particular case of internal flow is the flow between parallel flat plates also known as plane channel flow. This is a bidimensional flow which has analytical solution for the case of fully developed flow. In the present work this flow is simulated and compared with analytical solution. The finite volume method was used by means of open-source software OpenFOAM. Due to the geometry of the problem a structured mesh was used. In addition, a mesh sensitivity analysis was done which serves as a guide for the elaboration of meshes for the simulation of laminar flow in internal flow in general. The pressure in the flow direction, velocity profile, friction factor and maximum velocity to average velocity ratio were determined. Simulation results are perfectly in agreement with the analytical solution.

  • Open Access

    Different Experimental and Numerical Models to Analyse Emptying Processes in Pressurised Pipes with Trapped Air

    by Duban A. Paternina-Verona, Oscar E. Coronado-Hernández, Hector G. Espinoza-Román, Vicente S. Fuertes-Miquel, Helena M. Ramos

    In hydraulic engineering, some researchers have developed different mathematical and numerical tools for a better understanding of the physical interaction between water flow in pipes with trapped air during emptying processes, where they have made contributions on the use of simple and complex models in different application cases. In this article, a comparative study of different experimental and numerical models existing in the literature for the analysis of trapped air in pressurised pipelines subjected to different scenarios of emptying processes is presented, where different authors have develope, experimental, one-dimensional mathematical and complex computational fluid dynamics (CFD) models (two-dimensional and three-dimensional) to understand the level of applicability of these models in different hydraulic scenarios, from the physical and computational point of view. In general, experimental, mathematical and CFD models had maximum Reynolds numbers ranging from 2670 to 20,467, and it was possible to identify that the mathematical models offered relevant numerical information in a short simulation time on the order of seconds. However, there are restrictions to visualise some complex hydraulic and thermodynamic phenomena that CFD models are able to illustrate in detail with a numerical resolution similar to the mathematical models, and these require simulation times of hours or days. From this research, it was concluded that the knowledge of the information offered by the different models can be useful to hydraulic engineers to identify physical and numerical elements present in the air–water interaction and computational conditions necessary for the development of models that help decision-making in the field of hydraulics of pressurised pipelines.


  • Three-Dimensional Simulation of Transient Flows during the Emptying of Pipes with Entrapped Air

    by Duban A. Paternina-Verona, Oscar E. Coronado-Hernández, Andres M. Aguirre-Mendoza, Héctor G. Espinoza-Román, Vicente S. Fuertes-Miquel