Ana Carolina Corrêa Furtini
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ana Carolina Corrêa Furtini has a total of 89 co-authors. Here are the top co-authors by number of shared publications:
- José Benedito Guimarães Júnior
Federal University of Lavras, Brazil
21 shared publications - Carolina Aparecida dos Santos
Universidade Federal de Lavras
16 shared publications - Lourival Marin Mendes
Federal University of Lavras, Brazil
12 shared publications - Diogo Antonio Correa Gomes
Universidade Federal de Lavras
7 shared publications Lourival Marin Mendes
Federal University of Lavras – UFLA
7 shared publications- Flávia Maria Silva Brito
Federal University of Espírito Santo
6 shared publications
Latest Publications
- 21 March 2026
- Published by Taylor & Francis in Wood Material Science & Engineering
- p. 1-20
Eco-friendly adhesive from cardanol and silica nanoparticles for sustainable medium density particleboard (MDP)
Addition of SiO2NPs reduced solids content in cardanol-formaldehyde adhesives.Addition of SiO2NPs increased the viscosity of the cardanol-formaldehyde adhesive.11% cardanol-formaldehyde adhesive is...
- 21 March 2026
- Published by Taylor & Francis in Wood Material Science & Engineering
- p. 1-20
Eco-friendly adhesive from cardanol and silica nanoparticles for sustainable medium density particleboard (MDP)
Addition of SiO2NPs reduced solids content in cardanol-formaldehyde adhesives.Addition of SiO2NPs increased the viscosity of the cardanol-formaldehyde adhesive.11% cardanol-formaldehyde adhesive is...
- Open Access
- 23 February 2026
- Published by Editoriales Iberoamericanos in Cadernos Cajuína
- Vol. 11 (3) , e2130
Registros fotográficos de incrustações biológicas em madeiras de cais no distrito de Conceição de Salinas, Salinas da Margarida, Bahia, Brasil
O trabalho teve como objetivo registrar incrustações biológicas (cracas) em madeiras de cais expostas ao ambiente marinho no distrito de Conceição de Salinas, município de Salinas da Margarida, estado da Bahia, Brasil. A pesquisa teve caráter observacional e descritivo, com base em registros fotográficos realizados in loco com câmera digital. Os registros fotográficos obtidos neste estudo evidenciaram a ocorrência de incrustação por cracas em madeiras de cais expostas ao ambiente marinho de manguezal. A interpretação das imagens, à luz da literatura sobre bioincrustação, zonas de agressividade marinha e comportamento da madeira nesse contexto, permitiu discutir os possíveis fatores associados à fixação desses organismos nas estruturas. As evidências visuais apresentadas reforçam a relevância do monitoramento dessas estruturas, uma vez que a colonização observada indica a intensa interação entre o substrato lenhoso e o meio costeiro biologicamente ativo. Ademais, o estudo configura-se como um registro preliminar que pode subsidiar investigações futuras mais aprofundadas sobre a interação entre a madeira e os organismos incrustantes em ambientes marinhos.
- 23 February 2026
- Published by Editoriales Iberoamericanos in Cadernos Cajuína
- Vol. 11 (3) , e2130
Open AccessRegistros fotográficos de incrustações biológicas em madeiras de cais no distrito de Conceição de Salinas, Salinas da Margarida, Bahia, Brasil
O trabalho teve como objetivo registrar incrustações biológicas (cracas) em madeiras de cais expostas ao ambiente marinho no distrito de Conceição de Salinas, município de Salinas da Margarida, estado da Bahia, Brasil. A pesquisa teve caráter observacional e descritivo, com base em registros fotográficos realizados in loco com câmera digital. Os registros fotográficos obtidos neste estudo evidenciaram a ocorrência de incrustação por cracas em madeiras de cais expostas ao ambiente marinho de manguezal. A interpretação das imagens, à luz da literatura sobre bioincrustação, zonas de agressividade marinha e comportamento da madeira nesse contexto, permitiu discutir os possíveis fatores associados à fixação desses organismos nas estruturas. As evidências visuais apresentadas reforçam a relevância do monitoramento dessas estruturas, uma vez que a colonização observada indica a intensa interação entre o substrato lenhoso e o meio costeiro biologicamente ativo. Ademais, o estudo configura-se como um registro preliminar que pode subsidiar investigações futuras mais aprofundadas sobre a interação entre a madeira e os organismos incrustantes em ambientes marinhos.
- Open Access
- 19 February 2026
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 33 (8) , 3635-3650
Adhesives from Anadenanthera peregrina tannin for plywood production: effect of sodium bisulfite concentration on gluing quality
Applying different salt concentrations during extraction can increase the yield and improve the properties of tannic adhesives. The objective of this study was to develop natural polyphenol adhesives extracted with different concentrations of sodium bisulfite (NaHSO 3 ) for the production of plywood panels. The polyphenols were extracted from the bark of Anadenanthera peregrina with 0, 3, and 5% NaHSO 3 . The adhesives were produced with solids contents of 45% and 6% paraformaldehyde and tested on plywood panels. The adhesives were characterized by FTIR and thermogravimetric analysis. Gravimetric yield, viscosity, gelation time, solids content, and pH of the tannins were measured to evaluate their use as adhesives. The plywoods were evaluated based on the physical, mechanical, and microstructural properties. The tannins extracted from the bark of A. peregrina , under different concentrations of NaHSO 3 , reached high Stiasny values; the adhesives produced showed suitable physicochemical properties. However, increasing the concentration of bisulfite resulted in greater water absorption by the panels, restricting their use to indoor environments. Panels bonded with the adhesive extracted with 3% NaHSO 3 stood out for better mechanical properties, especially in static bending, in addition to meeting shear strength requirements. The bisulfite concentration indicates a viable option for increasing tannin yield, making it an environmentally sustainable alternative for the partial or total replacement of commercially formulated phenol–formaldehyde adhesives.
- 19 February 2026
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 33 (8) , 3635-3650
Open AccessAdhesives from Anadenanthera peregrina tannin for plywood production: effect of sodium bisulfite concentration on gluing quality
Applying different salt concentrations during extraction can increase the yield and improve the properties of tannic adhesives. The objective of this study was to develop natural polyphenol adhesives extracted with different concentrations of sodium bisulfite (NaHSO 3 ) for the production of plywood panels. The polyphenols were extracted from the bark of Anadenanthera peregrina with 0, 3, and 5% NaHSO 3 . The adhesives were produced with solids contents of 45% and 6% paraformaldehyde and tested on plywood panels. The adhesives were characterized by FTIR and thermogravimetric analysis. Gravimetric yield, viscosity, gelation time, solids content, and pH of the tannins were measured to evaluate their use as adhesives. The plywoods were evaluated based on the physical, mechanical, and microstructural properties. The tannins extracted from the bark of A. peregrina , under different concentrations of NaHSO 3 , reached high Stiasny values; the adhesives produced showed suitable physicochemical properties. However, increasing the concentration of bisulfite resulted in greater water absorption by the panels, restricting their use to indoor environments. Panels bonded with the adhesive extracted with 3% NaHSO 3 stood out for better mechanical properties, especially in static bending, in addition to meeting shear strength requirements. The bisulfite concentration indicates a viable option for increasing tannin yield, making it an environmentally sustainable alternative for the partial or total replacement of commercially formulated phenol–formaldehyde adhesives.
- Open Access
- 13 January 2026
- Published by Sociedade de Investigacoes Florestais (SIF) in Revista Árvore
- Vol. 50 (1) , 1-11
Potential application of Luffa cylindrica fibers in gypsum-based composites
Social evolution has intensified the search for materials in the construction industry, a situation that exacerbates waste production and high consumption of energy and non-renewable inputs. Given this scenario, it is essential to seek sustainable alternatives through the use of materials that can minimize waste production and environmental impacts. Luffa cylindrica, also known as vegetable loofah, can be incorporated into gypsum composites (widely used in construction) to produce sustainable, strong, lightweight, and environmentally friendly materials, with a positive impact on construction, the environment, and the economy. This study aims to verify the potential of Luffa cylindrica fibers as reinforcement in gypsum-based composites, evaluating their interaction with gypsum matrices through physical and mechanical analysis. Five formulations were produced with different fiber contents (0, 2.5, 5.0, 7.5, and 10.0%). The results demonstrated that the inclusion of vegetable sponge fibers did not significantly affect bulk density or short-term water absorption, likely due to the high lignin content. There was no change in the thermal resistance of the composites across treatments. These preliminary findings indicate that gypsum composites reinforced with up to 10% Luffa cylindrica fibers maintain stable physical and thermal properties, meeting the minimum flexural strength requirements established by EN 13279-1 (2008). Therefore, the proposed material proves to be a valid and effective sustainable alternative for civil construction applications, without compromising the performance of conventional gypsum.
- 13 January 2026
- Published by Sociedade de Investigacoes Florestais (SIF) in Revista Árvore
- Vol. 50 (1) , 1-11
Open AccessPotential application of Luffa cylindrica fibers in gypsum-based composites
Social evolution has intensified the search for materials in the construction industry, a situation that exacerbates waste production and high consumption of energy and non-renewable inputs. Given this scenario, it is essential to seek sustainable alternatives through the use of materials that can minimize waste production and environmental impacts. Luffa cylindrica, also known as vegetable loofah, can be incorporated into gypsum composites (widely used in construction) to produce sustainable, strong, lightweight, and environmentally friendly materials, with a positive impact on construction, the environment, and the economy. This study aims to verify the potential of Luffa cylindrica fibers as reinforcement in gypsum-based composites, evaluating their interaction with gypsum matrices through physical and mechanical analysis. Five formulations were produced with different fiber contents (0, 2.5, 5.0, 7.5, and 10.0%). The results demonstrated that the inclusion of vegetable sponge fibers did not significantly affect bulk density or short-term water absorption, likely due to the high lignin content. There was no change in the thermal resistance of the composites across treatments. These preliminary findings indicate that gypsum composites reinforced with up to 10% Luffa cylindrica fibers maintain stable physical and thermal properties, meeting the minimum flexural strength requirements established by EN 13279-1 (2008). Therefore, the proposed material proves to be a valid and effective sustainable alternative for civil construction applications, without compromising the performance of conventional gypsum.
- 1 January 2026
- Published by Editora Cientifica Digital
- p. 65-83
O USO DE ADESIVOS CARDANOL-FORMALDEÍDO MODIFICADO COM NANOESTRUTURAS DE LIGNINA NA PRODUÇÃO DE PAINÉIS COMPENSADOS
Os adesivos utilizados na produção de painéis compensados são predominantemente sintéticos e à base de formaldeído, como fenol-formaldeído, ureia-formaldeído e melamina-formaldeído. Embora apresentem boas propriedades de adesão, esses materiais estão associados à emissão de formaldeído, composto que pode comprometer a qualidade do ar e oferecer riscos à saúde humana. Nesse contexto, a busca por alternativas sustentáveis tem estimulado o uso de matérias-primas renováveis, como o cardanol e a lignina. O cardanol, obtido a partir do líquido da casca da castanha de caju, apresenta caráter fenólico, baixa volatilidade e características estruturais que favorecem sua aplicação em adesivos para produtos de madeira. A lignina, por sua vez, possui estrutura química semelhante à dos fenóis e diferentes grupos funcionais que possibilitam sua utilização em sistemas adesivos em sua forma nanométrica. Dessa forma, o objetivo desta pesquisa foi relatar a capacidade de utilização do cardanol e das nanoestruturas de lignina como adesivos na produção de painéis compensados. Para isso, foi realizada uma revisão bibliográfica, com levantamento e análise de estudos científicos relacionados ao uso desses materiais em sistemas adesivos para produtos de madeira. Os estudos analisados indicam potencial do cardanol e das nanoestruturas de lignina para o desenvolvimento de adesivos de base renovável, destacando possibilidades de aplicação e substituição parcial de componentes de origem petroquímica e menor impacto ambiental associado
- 1 January 2026
- Published by Editora Cientifica Digital
- p. 65-83
O USO DE ADESIVOS CARDANOL-FORMALDEÍDO MODIFICADO COM NANOESTRUTURAS DE LIGNINA NA PRODUÇÃO DE PAINÉIS COMPENSADOS
Os adesivos utilizados na produção de painéis compensados são predominantemente sintéticos e à base de formaldeído, como fenol-formaldeído, ureia-formaldeído e melamina-formaldeído. Embora apresentem boas propriedades de adesão, esses materiais estão associados à emissão de formaldeído, composto que pode comprometer a qualidade do ar e oferecer riscos à saúde humana. Nesse contexto, a busca por alternativas sustentáveis tem estimulado o uso de matérias-primas renováveis, como o cardanol e a lignina. O cardanol, obtido a partir do líquido da casca da castanha de caju, apresenta caráter fenólico, baixa volatilidade e características estruturais que favorecem sua aplicação em adesivos para produtos de madeira. A lignina, por sua vez, possui estrutura química semelhante à dos fenóis e diferentes grupos funcionais que possibilitam sua utilização em sistemas adesivos em sua forma nanométrica. Dessa forma, o objetivo desta pesquisa foi relatar a capacidade de utilização do cardanol e das nanoestruturas de lignina como adesivos na produção de painéis compensados. Para isso, foi realizada uma revisão bibliográfica, com levantamento e análise de estudos científicos relacionados ao uso desses materiais em sistemas adesivos para produtos de madeira. Os estudos analisados indicam potencial do cardanol e das nanoestruturas de lignina para o desenvolvimento de adesivos de base renovável, destacando possibilidades de aplicação e substituição parcial de componentes de origem petroquímica e menor impacto ambiental associado
- Open Access
- 1 January 2026
- Published by Editora Cientifica Digital
- Vol. 2, 42-55
APLICAÇÃO DO BIOCHAR EM SISTEMAS CIMENTÍCIOS COMO ALTERNATIVA SUSTENTÁVEL NA CONSTRUÇÃO CIVIL
O biochar é um material carbonáceo obtido pela pirólise de biomassa em ambiente com ausência ou limitação de oxigênio, apresentando elevada estabilidade química, porosidade e potencial de armazenamento de carbono. Nos últimos anos, seu uso em materiais cimentícios tem despertado interesse devido à possibilidade de melhorar determinadas propriedades e reduzir impactos ambientais associados à produção de cimento Portland. Este capítulo tem como objetivo analisar a aplicação do biochar em sistemas cimentícios, abordando suas características, formas de produção, principais propriedades e mecanismos de atuação. A revisão bibliográfica evidencia que fatores como biomassa de origem, temperatura de pirólise, granulometria e teor de incorporação influenciam diretamente o desempenho do material. Quando empregado como substituto parcial do cimento em baixos teores, o biochar apresenta potencial para reduzir o impacto ambiental dos materiais cimentícios, mantendo níveis adequados de desempenho mecânico e durabilidade. Conclui-se que o biochar apresenta potencial como alternativa sustentável para o desenvolvimento de materiais cimentícios de baixo carbono.
- 1 January 2026
- Published by Editora Cientifica Digital
- Vol. 2, 42-55
Open AccessAPLICAÇÃO DO BIOCHAR EM SISTEMAS CIMENTÍCIOS COMO ALTERNATIVA SUSTENTÁVEL NA CONSTRUÇÃO CIVIL
O biochar é um material carbonáceo obtido pela pirólise de biomassa em ambiente com ausência ou limitação de oxigênio, apresentando elevada estabilidade química, porosidade e potencial de armazenamento de carbono. Nos últimos anos, seu uso em materiais cimentícios tem despertado interesse devido à possibilidade de melhorar determinadas propriedades e reduzir impactos ambientais associados à produção de cimento Portland. Este capítulo tem como objetivo analisar a aplicação do biochar em sistemas cimentícios, abordando suas características, formas de produção, principais propriedades e mecanismos de atuação. A revisão bibliográfica evidencia que fatores como biomassa de origem, temperatura de pirólise, granulometria e teor de incorporação influenciam diretamente o desempenho do material. Quando empregado como substituto parcial do cimento em baixos teores, o biochar apresenta potencial para reduzir o impacto ambiental dos materiais cimentícios, mantendo níveis adequados de desempenho mecânico e durabilidade. Conclui-se que o biochar apresenta potencial como alternativa sustentável para o desenvolvimento de materiais cimentícios de baixo carbono.
- Open Access
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Revista Caatinga
- Vol. 39
Acoustic and thermal performance of sandwich panels made with pine wood and loofah sponge
Growing interest in renewable products has driven research on the development of structural composites reinforced with plant-based fibers. Among their potential applications, thermal and acoustic insulation in civil construction stands out. This study aimed to evaluate the performance of sandwich panels manufactured with Pinus oocarpa veneers and luffa sponge. Three treatments were evaluated, consisting of five-layer panels that varied in the number of luffa sponge layers in the core (0, 1, and 2). The panels were assessed for physical properties (moisture content and density), mechanical properties (modulus of elasticity and modulus of rupture), as well as acoustic and thermal insulation performance. Analysis of variance was performed, and when statistically significant differences were detected, the Scott-Knott mean comparison test (5%) was applied. The results indicated that panels manufactured with two luffa layers exhibited lower sound absorption at frequencies between 200 and 1000 Hz, meeting acoustic comfort standards at 1000 Hz. Control panels, without a luffa core layer, showed higher mechanical strength. In addition, despite differences in thermal performance, all treatments met regulatory requirements and qualified as thermal insulators. Overall, sandwich panels manufactured with Pinus oocarpa veneers and a luffa core show promise for acoustic insulation and thermal comfort applications in civil construction, representing a natural and sustainable fibrous alternative.
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Revista Caatinga
- Vol. 39
Open AccessAcoustic and thermal performance of sandwich panels made with pine wood and loofah sponge
Growing interest in renewable products has driven research on the development of structural composites reinforced with plant-based fibers. Among their potential applications, thermal and acoustic insulation in civil construction stands out. This study aimed to evaluate the performance of sandwich panels manufactured with Pinus oocarpa veneers and luffa sponge. Three treatments were evaluated, consisting of five-layer panels that varied in the number of luffa sponge layers in the core (0, 1, and 2). The panels were assessed for physical properties (moisture content and density), mechanical properties (modulus of elasticity and modulus of rupture), as well as acoustic and thermal insulation performance. Analysis of variance was performed, and when statistically significant differences were detected, the Scott-Knott mean comparison test (5%) was applied. The results indicated that panels manufactured with two luffa layers exhibited lower sound absorption at frequencies between 200 and 1000 Hz, meeting acoustic comfort standards at 1000 Hz. Control panels, without a luffa core layer, showed higher mechanical strength. In addition, despite differences in thermal performance, all treatments met regulatory requirements and qualified as thermal insulators. Overall, sandwich panels manufactured with Pinus oocarpa veneers and a luffa core show promise for acoustic insulation and thermal comfort applications in civil construction, representing a natural and sustainable fibrous alternative.
- Open Access
- 30 June 2025
- Published by Universidade Federal de Santa Maria in Ciência Florestal
- p. e91503
Incorporação de nanoestruturas de lignina em adesivo cardanol-formaldeído para a produção de painéis compensados
O uso de matérias-primas não renováveis tem gerado preocupações ambientais, incentivando a busca por alternativas sustentáveis. Este estudo investiga o uso do cardanol e lignina na produção de adesivos para painéis compensados. O cardanol, rico em compostos fenólicos, foi utilizado para sintetizar resinas cardanol-formaldeído, enquanto a lignina foi incorporada como nanoestrutura para melhorar as propriedades adesivas. Painéis de Pinus sp. foram produzidos com diferentes concentrações de nanoestruturas e suas propriedades físicas, mecânicas e acústicas foram avaliadas. Os resultados mostraram que os painéis com adição de nanoestrutura de lignina apresentaram maior desempenho em termos de resistência mecânica, como aumento significativo no cisalhamento na linha de cola, MOE e MOR, além de melhorar o isolamento acústico, apesar de não diferirem significativamente a densidade, umidade e absorção de água. Isso indica que o cardanol, em conjunto com nanoestruturas de lignina, pode representar uma solução viável para a produção de adesivos ecológicos, equilibrando desempenho técnico e sustentabilidade.
- 30 June 2025
- Published by Universidade Federal de Santa Maria in Ciência Florestal
- p. e91503
Open AccessIncorporação de nanoestruturas de lignina em adesivo cardanol-formaldeído para a produção de painéis compensados
O uso de matérias-primas não renováveis tem gerado preocupações ambientais, incentivando a busca por alternativas sustentáveis. Este estudo investiga o uso do cardanol e lignina na produção de adesivos para painéis compensados. O cardanol, rico em compostos fenólicos, foi utilizado para sintetizar resinas cardanol-formaldeído, enquanto a lignina foi incorporada como nanoestrutura para melhorar as propriedades adesivas. Painéis de Pinus sp. foram produzidos com diferentes concentrações de nanoestruturas e suas propriedades físicas, mecânicas e acústicas foram avaliadas. Os resultados mostraram que os painéis com adição de nanoestrutura de lignina apresentaram maior desempenho em termos de resistência mecânica, como aumento significativo no cisalhamento na linha de cola, MOE e MOR, além de melhorar o isolamento acústico, apesar de não diferirem significativamente a densidade, umidade e absorção de água. Isso indica que o cardanol, em conjunto com nanoestruturas de lignina, pode representar uma solução viável para a produção de adesivos ecológicos, equilibrando desempenho técnico e sustentabilidade.
- Open Access
- 30 May 2025
- Published by Universidade Federal de Santa Maria in Ciência Florestal
- p. e88280
Eco-friendly composite with matrix of recycled low-density polyethylene reinforced with wheat waste
The study investigated the effects of replacing varying amounts of straw and wheat husk residues on the properties of composites with a recycled low density polyethylene (LDPE) matrix. The composites were produced through the extrusion process, employing the following proportions: 0%, 10%, 20%, and 30% of wheat waste as reinforcement in the polymeric matrix. The agricultural wastes were reduced in particles and characterized in natura. The composites were shaped from pressing processes and their physical, mechanical and microstructural properties were evaluated. The results have shown an increase in water absorption for each 1% of wheat waste inserted in the composite of the order of 0.018%. The density of the composites decreased with the replacement of wheat waste by 4.8 g/cm3 for each 1% of replacement. The substitution of wheat waste increased the burning speed (flammability) when compared to recycled polymers (LDPE100%), indicating shorter fire spread time. There was a decrease in strength, modulus of elastic and tenacity, obtaining a material with high deformation.
- 30 May 2025
- Published by Universidade Federal de Santa Maria in Ciência Florestal
- p. e88280
Open AccessEco-friendly composite with matrix of recycled low-density polyethylene reinforced with wheat waste
The study investigated the effects of replacing varying amounts of straw and wheat husk residues on the properties of composites with a recycled low density polyethylene (LDPE) matrix. The composites were produced through the extrusion process, employing the following proportions: 0%, 10%, 20%, and 30% of wheat waste as reinforcement in the polymeric matrix. The agricultural wastes were reduced in particles and characterized in natura. The composites were shaped from pressing processes and their physical, mechanical and microstructural properties were evaluated. The results have shown an increase in water absorption for each 1% of wheat waste inserted in the composite of the order of 0.018%. The density of the composites decreased with the replacement of wheat waste by 4.8 g/cm3 for each 1% of replacement. The substitution of wheat waste increased the burning speed (flammability) when compared to recycled polymers (LDPE100%), indicating shorter fire spread time. There was a decrease in strength, modulus of elastic and tenacity, obtaining a material with high deformation.
- Open Access
- 30 April 2025
- Published by Brazilian Journals in Caderno Pedagógico
- Vol. 22 (7) , e16593
Study of the mechanical properties of glued laminated timber (glulam) with treated Hevea brasiliensis and epoxy adhesive
The search for sustainable alternative sources of materials for use as structural elements in civil construction has been gaining prominence in recent years. Glued laminated timber (glulam) is an environmentally friendly option aimed at replacing traditional steel and reinforced concrete structures. However, challenges in the production of these ecological composite materials are known, such as the choice of adhesive to join the wood lamellas, and also related to the biodeterioration of the wood, a situation in which the structural reliability of the building can be compromised. The use of preservative solutions is an alternative that mitigates this problem and ensures greater durability of the material. The objective of this work was to evaluate the mechanical properties of glulam beams produced with rubberwood treated with chromated copper borate (CCB), chromated copper arsenate (CCA) and pyrethroid preservatives using epoxy as an adhesive, a type of formaldehyde-free adhesive. The glulam beams were produced with 3 lamellas measuring 60 × 20 × 1200 mm, differentiated by the presence or absence of preservative treatment. Rubberwood had an apparent density of 0.528 g.cm-3, being classified as low to medium density, therefore ideal for the production of glulam parts. The preservative treatments with CCA and CCB significantly reduced the evaluated mechanical properties, for example, the compressive strength parallel to the fibers was reduced from 49.27 MPa to 43.86 MPa for the glulam beams without preservative and treated with CCA, respectively. However, pyrethroid treatment did not affect the mechanical strength of the beams under study.
- 30 April 2025
- Published by Brazilian Journals in Caderno Pedagógico
- Vol. 22 (7) , e16593
Open AccessStudy of the mechanical properties of glued laminated timber (glulam) with treated Hevea brasiliensis and epoxy adhesive
The search for sustainable alternative sources of materials for use as structural elements in civil construction has been gaining prominence in recent years. Glued laminated timber (glulam) is an environmentally friendly option aimed at replacing traditional steel and reinforced concrete structures. However, challenges in the production of these ecological composite materials are known, such as the choice of adhesive to join the wood lamellas, and also related to the biodeterioration of the wood, a situation in which the structural reliability of the building can be compromised. The use of preservative solutions is an alternative that mitigates this problem and ensures greater durability of the material. The objective of this work was to evaluate the mechanical properties of glulam beams produced with rubberwood treated with chromated copper borate (CCB), chromated copper arsenate (CCA) and pyrethroid preservatives using epoxy as an adhesive, a type of formaldehyde-free adhesive. The glulam beams were produced with 3 lamellas measuring 60 × 20 × 1200 mm, differentiated by the presence or absence of preservative treatment. Rubberwood had an apparent density of 0.528 g.cm-3, being classified as low to medium density, therefore ideal for the production of glulam parts. The preservative treatments with CCA and CCB significantly reduced the evaluated mechanical properties, for example, the compressive strength parallel to the fibers was reduced from 49.27 MPa to 43.86 MPa for the glulam beams without preservative and treated with CCA, respectively. However, pyrethroid treatment did not affect the mechanical strength of the beams under study.