Qingzhe Gao

Accurate predictions of the blade response in a multi-row compressor is one of the most important tasks within the design process of compressor blades. Some recent studies have shown that the decoupled method considering only the stator disturbances cannot obtain accurate results for cases with strong rotor–stator interactions, especially for the interaction between the rotor and downstream stator, and the coupled method with multi-row configurations is necessary. Factors determine what computational domains to model need to be clarified to find a balance between accuracy requirements and computational costs. To this end, this study conducted full-annulus unsteady calculations with decoupled and coupled configurations to investigate the forced response of an embedded compressor rotor induced by upstream and downstream stator disturbances and rotor–stator interactions, respectively. The results show that the upstream IGV disturbances were dominated by the wake, and the IGV and S1 potential fields had little effect on the R1 response. Meanwhile, the IGV–R1 interactions and S1–R1 interactions were dominated by one cut-on mode, respectively. The comparisons of the blade vibration amplitude and the unsteady pressure field calculated by decoupled and coupled methods revealed the mechanism of the forced response, namely, for the R1 response induced by upstream aerodynamic disturbances, the dominant excitation source was the IGV wake, and the blade vibration amplitude can be predicted by the decoupled method. In terms of the response induced by downstream disturbances, the cut-on S1-R1-interaction mode was dominant and the use of the decoupled method without considering its influence will lead to an inaccurate prediction. This study concluded that the formation process of rotor–stator interactions was the key factor that determines whether the decoupled method or coupled method should be used, and analogized a process independent of the downstream stator disturbance. The results can provide a preliminary configuration for accurate and efficient blade response predictions and explain the reason why including downstream stator vanes is very important.

In this paper, the major problems associated with detached eddy simulation (DES) (namely, modeled stress depletion (MSD) and slowing of the RANS to LES transition (RLT)) are discussed and reviewed, and relevant improvements are developed. A modified version for the delayed DES (DDES) method with adaptive modified adequate shielding and rapid transition is proposed; this is called MSRT DDES. The modified shielding strategy can be adjusted adaptively according to the local flow conditions: keeping the RANS behavior in the whole boundary layer when there is no resolved turbulence, and weakening the shielding function when resolved turbulence exists in the mainstream over the boundary layer. This strategy can significantly ameliorate the MSD in the RANS boundary layer, regardless of the mesh refinement, and avoid excessive shielding in the fully developed resolved turbulence that may otherwise delay the development of the separated and reattached flow. Three cases are designed to test the modified DDES, namely, complete shielding in the RANS zone of a boundary layer (the zero-pressure gradient turbulent boundary layer with the refined mesh), modified adaptive improved shielding with a rapid transition (the flow over a hump), and the overall performance in a complex 3D separation (the corner separation in a compressor cascade). The results show that the modified shielding function is more physical than earlier proposals compared to shielding functions, and according to detailed comparisons of the wall skin friction coefficients, velocity profiles, total pressure-loss coefficients, entropy production analyses, and so on, the MSD and RLT problems are moderately alleviated by the MSRT DDES.

Tip clearance has an important effect on the aerodynamic performance of the turbine. In general designs, the tip clearance in the circumferential direction is usually uniform. However, circumferential variations in tip clearance, such as casing deformation due to processing, assembly, high temperature environment, etc., present additional operating problems for the turbine.

S-shaped intakes are widely used in aero-engines of modern fighters because of the urgent demand for reducing radar cross-section. Compared with normal straight intakes, it is inevitable to bring in the influence of inlet distortions and acoustic wave reflections. Meanwhile, composite fan blades, shorter intakes and integrated blisks are common in engine designs. So, fan blades are