Roman Stolyarov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Roman Stolyarov has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Nikolay Chapaksov
Tambov State Technical University (TSTU)
4 shared publications - Viktor Yagubov
Tambov State Technical University
3 shared publications - Alexey G. Tkachev
Tambov State Tech Univ, Tambov, Russia
2 shared publications - Dmitriy Tarov
Тамбовский государственный технический университет, Тамбов
2 shared publications - Igor Nikolaevich Burmistrov
National University of Science and Technology “MISIS
2 shared publications - Nariman R. Memetov
Tambov State Technical University
2 shared publications
Latest Publications
- 1 October 2023
- Published by Pleiades Publishing Ltd in Inorganic Materials: Applied Research
- Vol. 14 (5-6) , 1327-1334
Methane Sorption Capacity of a Carbon Material Based on Polymer Raw Materials
A carbon material (MS-032) was synthesized from polymer raw materials and characterized by various methods, including N2 adsorption–desorption at 77 K, X-ray powder diffraction analysis, Fourier transform IR spectroscopy, and Raman spectroscopy. The obtained adsorbent has a well-developed porous structure (SBET = 2722 m2/g, VDFT = 1.08 cm3/g). The adsorption of methane was studied over a wide range of pressures at temperatures above the critical one. The maximum adsorption value is ~14 mmol/g at 298.15 K and 10 МРа. The experimental data on the methane adsorption on MS-032 were analyzed using the Dubinin–Radushkevich adsorption model in the temperature range 298.15–323.15 K and pressures up to 10 МРа. It was determined that the average relative deviations between the experimental results and the results obtained using the Dubinin–Radushkevich model are less than 4%. The differential molar heats of methane adsorption decrease from ~25 to ~10 kJ/mol. The calculated characteristic energies of adsorption are in the range of 5.88–6.21 kJ/mol, which indicates that the process of methane adsorption on MS-032 is physical adsorption. MS-032 carbon material has high methane adsorption capacity and has good prospects for controlling methane emissions and reducing greenhouse gases.
- 1 October 2023
- Published by Pleiades Publishing Ltd in Inorganic Materials: Applied Research
- Vol. 14 (5-6) , 1327-1334
Methane Sorption Capacity of a Carbon Material Based on Polymer Raw Materials
A carbon material (MS-032) was synthesized from polymer raw materials and characterized by various methods, including N2 adsorption–desorption at 77 K, X-ray powder diffraction analysis, Fourier transform IR spectroscopy, and Raman spectroscopy. The obtained adsorbent has a well-developed porous structure (SBET = 2722 m2/g, VDFT = 1.08 cm3/g). The adsorption of methane was studied over a wide range of pressures at temperatures above the critical one. The maximum adsorption value is ~14 mmol/g at 298.15 K and 10 МРа. The experimental data on the methane adsorption on MS-032 were analyzed using the Dubinin–Radushkevich adsorption model in the temperature range 298.15–323.15 K and pressures up to 10 МРа. It was determined that the average relative deviations between the experimental results and the results obtained using the Dubinin–Radushkevich model are less than 4%. The differential molar heats of methane adsorption decrease from ~25 to ~10 kJ/mol. The calculated characteristic energies of adsorption are in the range of 5.88–6.21 kJ/mol, which indicates that the process of methane adsorption on MS-032 is physical adsorption. MS-032 carbon material has high methane adsorption capacity and has good prospects for controlling methane emissions and reducing greenhouse gases.
- Open Access
- 1 January 2023
- Published by Tambov State Technical University in Image Journal of Advanced Materials and Technologies
- Vol. 8 (3)
Influence of the concentration and ratio of components of hybrid nanofillers on the electrical conductivity of modified bitumen binders
Modifying additives are introduced into the composition of modern bituminous binders to meet the high modern requirements for the performance of road surfaces. The use of carbon nanomaterials as modifiers imparts antistatic properties to bituminous binders and opens up the possibility of applying an innovative approach to healing cracks in the asphalt pavement under the action of microwave radiation with its subsequent regeneration. A series of samples of nanocomposite materials based on BND 60/90 bitumen and hybrid filler containing graphene nanoplatelets (GNPs) and multi-walled carbon nanotubes (MWСNTs) were prepared using a simple mixing technique. The use of hybrid with a ratio of MWCNTs to GNP equal to 4:0.1 made it possible to achieve the maximum electrical conductivity of bitumen nanocompositions, the value of which was 4.82⋅10–3 S⋅cm–1 at a filler concentration of 8 wt. %. The optimal ratio of MWCNTs to GNP components equal to 4:1 was experimentally found, at which the percolation threshold decreased by 50 and 100 % compared with nanocomposites having a MWCNT to GNP ratio of 4 : 0.1 and 1 : 1, respectively. A mechanism for the formation of a double percolation contour in a bitumen-based nanocomposite system containing GNP and MWCNTs in a ratio of 4 : 1 is proposed.
- 1 January 2023
- Published by Tambov State Technical University in Image Journal of Advanced Materials and Technologies
- Vol. 8 (3)
Open AccessInfluence of the concentration and ratio of components of hybrid nanofillers on the electrical conductivity of modified bitumen binders
Modifying additives are introduced into the composition of modern bituminous binders to meet the high modern requirements for the performance of road surfaces. The use of carbon nanomaterials as modifiers imparts antistatic properties to bituminous binders and opens up the possibility of applying an innovative approach to healing cracks in the asphalt pavement under the action of microwave radiation with its subsequent regeneration. A series of samples of nanocomposite materials based on BND 60/90 bitumen and hybrid filler containing graphene nanoplatelets (GNPs) and multi-walled carbon nanotubes (MWСNTs) were prepared using a simple mixing technique. The use of hybrid with a ratio of MWCNTs to GNP equal to 4:0.1 made it possible to achieve the maximum electrical conductivity of bitumen nanocompositions, the value of which was 4.82⋅10–3 S⋅cm–1 at a filler concentration of 8 wt. %. The optimal ratio of MWCNTs to GNP components equal to 4:1 was experimentally found, at which the percolation threshold decreased by 50 and 100 % compared with nanocomposites having a MWCNT to GNP ratio of 4 : 0.1 and 1 : 1, respectively. A mechanism for the formation of a double percolation contour in a bitumen-based nanocomposite system containing GNP and MWCNTs in a ratio of 4 : 1 is proposed.
- 20 October 2022
- Published by Elsevier in Journal of Cleaner Production
- Vol. 379
Reduced graphene oxide based composite aerogels for energy storage and transportation of methane
- 20 October 2022
- Published by Elsevier in Journal of Cleaner Production
- Vol. 379
Reduced graphene oxide based composite aerogels for energy storage and transportation of methane
- 1 January 2022
- Published by Tambov State Technical University in Image Journal of Advanced Materials and Technologies
- Vol. 7 (4)
Electrical conductivity of composites based on ultra-high molecular weight polyethylene modified with a mixture of graphene nanoplates and iodized carbon nanotubes
In this work, a series of samples of composite materials based on ultra-high molecular weight polyethylene and a hybrid filler containing graphene nanoplates and iodized multi-walled carbon nanotubes (MWCNTs) were obtained by pressing followed by sintering. The resulting nanocomposites were studied by X-ray phase analysis and Raman spectroscopy. The iodine concentration in the modified MWCNTs was determined by energy dispersive X-ray fluorescence analysis. Assessment of the structural features of nanomaterials using X-ray phase analysis indicates the absence of iodine in the interlayer space of graphene sheets, while a change in the surface is observed. Raman spectroscopy data indicate an insignificant destructive effect of iodine on the surface of the nanomaterial. The study of electrical conductivity showed that when using iodine-modified MWCNTs as a filler, the percolation threshold shifts to lower filler concentrations, in comparison with nanocomposite samples containing unmodified nanotubes. An increase in the concentration of graphene nanoplates contributes to a twofold decrease in the percolation threshold. The maximum electrical conductivity of 5.4×10–4 S⋅cm–1 was achieved in ultra-high molecular weight polyethylene nanocomposites containing 3 wt. % iodinated multi-walled carbon nanotubes and 1 wt. % graphene nanoplates.
- 1 January 2022
- Published by Tambov State Technical University in Image Journal of Advanced Materials and Technologies
- Vol. 7 (4)
Electrical conductivity of composites based on ultra-high molecular weight polyethylene modified with a mixture of graphene nanoplates and iodized carbon nanotubes
In this work, a series of samples of composite materials based on ultra-high molecular weight polyethylene and a hybrid filler containing graphene nanoplates and iodized multi-walled carbon nanotubes (MWCNTs) were obtained by pressing followed by sintering. The resulting nanocomposites were studied by X-ray phase analysis and Raman spectroscopy. The iodine concentration in the modified MWCNTs was determined by energy dispersive X-ray fluorescence analysis. Assessment of the structural features of nanomaterials using X-ray phase analysis indicates the absence of iodine in the interlayer space of graphene sheets, while a change in the surface is observed. Raman spectroscopy data indicate an insignificant destructive effect of iodine on the surface of the nanomaterial. The study of electrical conductivity showed that when using iodine-modified MWCNTs as a filler, the percolation threshold shifts to lower filler concentrations, in comparison with nanocomposite samples containing unmodified nanotubes. An increase in the concentration of graphene nanoplates contributes to a twofold decrease in the percolation threshold. The maximum electrical conductivity of 5.4×10–4 S⋅cm–1 was achieved in ultra-high molecular weight polyethylene nanocomposites containing 3 wt. % iodinated multi-walled carbon nanotubes and 1 wt. % graphene nanoplates.
- 1 September 2021
- Published by Elsevier in Composites Science and Technology
- Vol. 214
Increasing electrical conductivity of PMMA-MWCNT composites by gas phase iodination
- 1 September 2021
- Published by Elsevier in Composites Science and Technology
- Vol. 214
Increasing electrical conductivity of PMMA-MWCNT composites by gas phase iodination
- 1 September 2006
- Published by Pleiades Publishing Ltd in Physics of the Solid State
- Vol. 48 (9) , 1827-1830
Local charge-carrier trapping centers in C60 single crystals
- 1 September 2006
- Published by Pleiades Publishing Ltd in Physics of the Solid State
- Vol. 48 (9) , 1827-1830
Local charge-carrier trapping centers in C60 single crystals