Shin-Ichi Honda
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Shin-Ichi Honda has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
Keisuke Niwase
Hyogo University of Teacher Education
2 shared publicationsMasahito Niibe
LASTI, University of Hyōgo
2 shared publicationsMititaka Terasawa
LASTI, University of Hyogo, Hyogo 678-1205, Japan
2 shared publicationsSyusaku Nakamura
Dept. Electrical Materials and Engineering, University of Hyogo, Hyogo 671-2280, Japan
2 shared publicationsYuji Higo
Japan Synchrotron Research Institute
2 shared publicationsEiji Taguchi
Osaka University Research Center for Ultra High Voltage Electron Microscopy, Ibaraki, Osaka, JAPAN
1 shared publication
Latest Publications
- 23 June 2026
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 65 (15) , 155002
Effect of neutron irradiation on the synthesis of nano-layered diamond from highly oriented pyrolytic graphite (HOPG) under high-pressure and high-temperature treatment
Using neutron-irradiated highly oriented pyrolytic graphite (n-HOPG) as a starting material, we have synthesized nano-layered diamonds for the first time by high-pressure and high-temperature (HPHT) treatment at 15 GPa and 2070 °C. Furthermore, analysis of the in situ angle-dispersive X-ray diffraction (XRD) patterns of n-irradiated and unirradiated HOPGs showed cubic diamond (cDIA) formation was not observed for n-HOPG below approximately 1400 °C, but was for unirradiated HOPG at approximately 1000°C. In contrast, transmission electron microscopy (TEM) observation of the recovered specimens revealed that nano-layered cDIAs oriented in the [111] direction were formed in both n-irradiated and unirradiated HOPGs. Still the thickness of the individual nano-layered cDIAs was larger in n-HOPG than in unirradiated HOPG. These results were discussed in terms of the recovery of irradiation-induced defects with increasing temperature under high pressure in n-HOPG and the nucleation and growth of diamond.
- 23 June 2026
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 65 (15) , 155002
Effect of neutron irradiation on the synthesis of nano-layered diamond from highly oriented pyrolytic graphite (HOPG) under high-pressure and high-temperature treatment
Using neutron-irradiated highly oriented pyrolytic graphite (n-HOPG) as a starting material, we have synthesized nano-layered diamonds for the first time by high-pressure and high-temperature (HPHT) treatment at 15 GPa and 2070 °C. Furthermore, analysis of the in situ angle-dispersive X-ray diffraction (XRD) patterns of n-irradiated and unirradiated HOPGs showed cubic diamond (cDIA) formation was not observed for n-HOPG below approximately 1400 °C, but was for unirradiated HOPG at approximately 1000°C. In contrast, transmission electron microscopy (TEM) observation of the recovered specimens revealed that nano-layered cDIAs oriented in the [111] direction were formed in both n-irradiated and unirradiated HOPGs. Still the thickness of the individual nano-layered cDIAs was larger in n-HOPG than in unirradiated HOPG. These results were discussed in terms of the recovery of irradiation-induced defects with increasing temperature under high pressure in n-HOPG and the nucleation and growth of diamond.
- Open Access
Dispersion of Long and Isolated Single-Wall Carbon Nanotubes by Using a Hydrodynamic Cavitation Method
Single-wall carbon nanotubes (SWCNTs) are promising materials for electronic applications, such as transparent electrodes and thin-film transistors. However, the dispersion of isolated SWCNTs into solvents remains an important issue for their practical applications. SWCNTs are commonly dispersed in solvents via ultrasonication. However, ultrasonication damages SWCNTs, forming defects and cutting them into short pieces, which significantly degrade their electrical and mechanical properties. Herein, we demonstrate a novel approach toward the large-scale dispersion of long and isolated SWCNTs by using hydrodynamic cavitation. Considering the results of atomic force microscopy and dynamic light-scattering measurements, the average length of the SWCNTs dispersed via the hydrodynamic cavitation method is larger than that of the SWCNTs dispersed by using an ultrasonic homogenizer.
Open AccessDispersion of Long and Isolated Single-Wall Carbon Nanotubes by Using a Hydrodynamic Cavitation Method
Single-wall carbon nanotubes (SWCNTs) are promising materials for electronic applications, such as transparent electrodes and thin-film transistors. However, the dispersion of isolated SWCNTs into solvents remains an important issue for their practical applications. SWCNTs are commonly dispersed in solvents via ultrasonication. However, ultrasonication damages SWCNTs, forming defects and cutting them into short pieces, which significantly degrade their electrical and mechanical properties. Herein, we demonstrate a novel approach toward the large-scale dispersion of long and isolated SWCNTs by using hydrodynamic cavitation. Considering the results of atomic force microscopy and dynamic light-scattering measurements, the average length of the SWCNTs dispersed via the hydrodynamic cavitation method is larger than that of the SWCNTs dispersed by using an ultrasonic homogenizer.
- 19 August 2021
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 60 (9) , 095002
In situ observation of transformation of neutron-irradiated highly oriented pyrolytic graphite (HOPG) by X-ray diffraction under high-pressure and high-temperature treatment
In situ X-ray diffraction observation was done for neutron-irradiated and un-irradiated highly oriented pyrolytic graphite (HOPG) samples with synchrotron radiation to clarify the effect of irradiation-induced defects on the transformation to diamond under high-pressure and high-temperature treatment. At 16 GPa, no remarkable change appeared for the irradiated HOPG with increasing the temperature up to 800 °C. At temperatures of 1200 °C and 1400 °C, hexagonal diamond was formed, along with the formation of cubic diamond. This is probably due to annealing of the irradiation defects that led to partial restoration of the structure to the original HOPG and then enables the formation. On the other hand, in un-irradiated HOPG, hexagonal diamond was formed at 400 °C, which changed to cubic diamond at 1200 °C or higher. We guess that irradiation defects promote the nucleation of cubic diamond in the irradiated sample and then contribute to the formation of isotropic polycrystalline diamond or amorphous diamond.
- 19 August 2021
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 60 (9) , 095002
In situ observation of transformation of neutron-irradiated highly oriented pyrolytic graphite (HOPG) by X-ray diffraction under high-pressure and high-temperature treatment
In situ X-ray diffraction observation was done for neutron-irradiated and un-irradiated highly oriented pyrolytic graphite (HOPG) samples with synchrotron radiation to clarify the effect of irradiation-induced defects on the transformation to diamond under high-pressure and high-temperature treatment. At 16 GPa, no remarkable change appeared for the irradiated HOPG with increasing the temperature up to 800 °C. At temperatures of 1200 °C and 1400 °C, hexagonal diamond was formed, along with the formation of cubic diamond. This is probably due to annealing of the irradiation defects that led to partial restoration of the structure to the original HOPG and then enables the formation. On the other hand, in un-irradiated HOPG, hexagonal diamond was formed at 400 °C, which changed to cubic diamond at 1200 °C or higher. We guess that irradiation defects promote the nucleation of cubic diamond in the irradiated sample and then contribute to the formation of isotropic polycrystalline diamond or amorphous diamond.