Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Jie Li has a total of 55 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Bilateral-wheeled inspection robot with flexible shock-absorbing suspensions for bridge cables

    by Xindi Wang, Lezhi Hu, Kege Li, Zizhuo Wang, Fengyu Xu, Jie Li

    Stay cable inspections are crucial for the maintenance and safety of bridges, as their structural integrity directly impacts the overall stability of bridge systems. However, traditional inspection methods are labor-intensive, time-consuming, and expose workers to significant safety risks. To address these challenges, this paper presents a robotic system for the inspection of stay cables, with a lightweight body and a strong load-carrying capacity. The robot can move on bridge cables, replacing human workers in carrying out risky tasks and reducing inspection time with instruments such as cameras and non-destructive testing tools. The novel elastic suspension mechanisms are proposed in consideration of the surface conditions of the bridge cables. The designed robot is composed of V-shaped wheels driven by two motors on one side, joined by an adjustable frame. The elastic suspension constructed by 4 bar linkages improves the load capacity, stability, and obstacle negotiation performance of the robot. To avoid deviating risk and off-tracking, the anti-deflection mechanism is introduced. Laboratory experiments verified that the robot is capable of stable climbing under heavy load conditions and demonstrates strong obstacle-negotiation performance. It can carry a maximum effective payload of 11.1 kg and surmount obstacles up to 13 mm in height. The experimental results also demonstrate that for the elastic suspension mechanism, a suitable elastic coefficient is beneficial to improving the climbing performance of the robot. For practical applications, the field test results on cable-stayed bridges indicate that such a lightweight and high-performance system can improve the efficiency and stability of inspection operations and replace manual inspection with automated damage identification.


  • Research on Passive Exoskeleton for Human Gait Measurement

    by Zhiyong Zhu, Linjie Dong, Jie Li, Xingsong Wang, Zhengrui Zhao

  • Open Access

    Spatial Trajectory Tracking of Wall-Climbing Robot on Cylindrical Tank Surface Using Backstepping Sliding-Mode Control

    by Jiameng Xue, Jingyu Chen, Alexsandru Stancu, Xingsong Wang, Jie Li

    Wall-climbing robots have been well-developed for storage tank inspection. This work presents a backstepping sliding-mode control (BSMC) strategy for the spatial trajectory tracking control of a wall-climbing robot, which is specially designed to inspect inside and outside of cylindrical storage tanks. The inspection robot is designed with four magnetic wheels, which are driven by two DC motors. In order to achieve an accurate spatial position of the robot, a multisensor-data-fusion positioning method is developed. The new control method is proposed with kinematics based on a cylindrical coordinate system as the robot is moving on a cylindrical surface. The main purpose is to promote a smooth and stable tracking performance during inspection tasks, under the consideration of the robot’s kinematic constraints and the magnetic restrictions of the adhesion system. The simulation results indicate that the proposed sliding mode controller can quickly correct the errors and global asymptotic stability is achieved. The prototype experimental results further validate the advancement of the proposed method; the wall-climbing robot can track both longitudinal and horizontal spatial trajectories stably with high precision.


  • Open Access

    Elastic Obstacle-Surmounting Pipeline-Climbing Robot with Composite Wheels

    by Jie Li, Feng Huang, Chunlei Tu, Mengqian Tian, Xingsong Wang

    Regular inspection and maintenance can ensure safe working conditions of transport pipelines without leakage and damage. Pipeline-climbing robots can be used for rapid inspection of pipelines, effectively reducing labor costs and time consumption. For the annular pipelines outside spherical tanks, the special distribution and installation form presents more high obstacles, and puts forward higher requirements for the robot’s climbing performance and obstacle-surmounting ability. An elastic obstacle-surmounting pipeline-climbing robot with composite wheels is proposed in this paper. The designed elastic shock-absorbing suspension mechanisms and composite wheels were designed to increase the stability and obstacle-surmounting ability of the robot. The adjustable robot frame and rotating joint mechanisms allowed the robot to adapt to pipelines of different diameters and radians. Force analysis and simulation of obstacle surmounting by the robot were performed. Experiments were conducted on a 110-mm diameter pipeline to test the payload performance and obstacle-surmounting ability of the robot. With its elastic shock-absorbing suspension mechanisms, the pipeline-climbing robot could carry a 30 kg payload and stably climb the pipeline. The maximum height of obstacles surmounted by the composite wheels of the robot was 20 mm. In the process of surmounting obstacles, the velocity and inclination angle of the robot could remain relatively stable. This novel composite wheels and mechanisms can improve the performance of the pipeline-climbing robot and solve the problem of surmounting high obstacles. By carrying various equipment and instruments, the robot can promote the automated maintenance and inspection of complex pipelines.


  • Open Access

    Weld Seam Identification and Tracking of Inspection Robot Based on Deep Learning Network

    by Jie Li, Beibei Li, Linjie Dong, Xingsong Wang, Mengqian Tian

    The weld seams of large spherical tank equipment should be regularly inspected. Autonomous inspection robots can greatly enhance inspection efficiency and save costs. However, the accurate identification and tracking of weld seams by inspection robots remains a challenge. Based on the designed wall-climbing robot, an intelligent inspection robotic system based on deep learning is proposed to achieve the weld seam identification and tracking in this study. The inspection robot used mecanum wheels and permanent magnets to adsorb metal walls. In the weld seam identification, Mask R-CNN was used to segment the instance of weld seams. Through image processing combined with Hough transform, weld paths were extracted with a high accuracy. The robotic system efficiently completed the weld seam instance segmentation through training and learning with 2281 weld seam images. Experimental results indicated that the robotic system based on deep learning was faster and more accurate than previous methods, and the average time of identifying and calculating weld paths was about 180 ms, and the mask average precision (AP) was about 67.6%. The inspection robot could automatically track seam paths, and the maximum drift angle and offset distance were 3° and 10 mm, respectively. This intelligent weld seam identification system will greatly promote the application of inspection robots.


  • Spatial positioning robotic system for autonomous inspection of LPG tanks

    by Jie Li, Jiyuan Wu, Chunlei Tu, Xingsong Wang

    Purpose: Automatic robots can improve the efficiency of liquefied petroleum gas (LPG) tank inspection and maintenance, but it is difficult to achieve high-precision spatial positioning and navigation on tank surfaces. The purpose of this paper is to develop a spatial positioning robotic system for tank inspection. The robot can accurately identify and track weld paths. The positioning system can complete robot’s spatial positioning on tank surfaces. Design/methodology/approach: A tank inspection robot with curvature-adaptive transmission mechanisms is designed in this study. A weld path recognition method based on deep learning is proposed to accurately identify and extract weld paths. Integrated multiple sensors, the positioning system is developed to improve the robot’s spatial positioning accuracy. Experiments are conducted on a cylindrical tank to test weld seam tracking accuracy and spatial positioning performance of the robotic system. The practicality of the robotic system is then verified in field tests. Findings: The robot can accurately identify and track weld seams with a maximum drift angle of 4° and a maximum offset distance of ±30 mm. The positioning system has excellent positioning accuracy and stability. The maximum angle and height errors are 3° and 0.08 m, respectively. Originality/value: The positioning system can improve the autonomous performance of inspection robots and solve the problems of weld path recognition and spatial positioning. Application of the robotic system can promote the automatic inspection and maintenance of LPG tanks.