Sofia Magdalena Vega-Díaz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sofia Magdalena Vega-Díaz has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
Alma D. Salazar-Aguilar
Departamento de Ingeniería Química, Tecnológico Nacional de México, Instituto Tecnológico de Celaya, Av. García Cubas Pte # 600 esq. Avenida Tecnológico, 38010 Celaya, Guanajuato, Mexico
2 shared publicationsAlexis Piñeiro-García
Departamento de Ingeniería Química, Tecnológico Nacional de México/Instituto Tecnológico de Celaya, Avenida Tecnológico esq., A. García Cubas #600 Pt, CP 38010 Celaya, Guanajuato, México
1 shared publication- Asuncion Quintanilla
Department of Chemical Engineering, Universidad Autónoma de Madrid, Campus de Cantoblanco, C/Francisco Tomás y Valiente 7, 28049 Madrid, Spain
1 shared publication Carla Martínez
Chemical Engineering Department, Universidad Autónoma de Madrid, Ctra. Colmenar km 15, 28049 Madrid, Spain
1 shared publicationDavid Meneses-Rodríguez
Cátedras-CONACYT CINVESTAV, Mérida Km 6, Carretera Antigua a Progreso, Cordemex, CP 97310 Mérida, Yucatán, México
1 shared publicationFerdinando Tristan
Departamento de Ingeniería Química, Tecnológico Nacional de México/Instituto Tecnológico de Celaya, Avenida Tecnológico esq., A. García Cubas #600 Pt, CP 38010 Celaya, Guanajuato, México
1 shared publication
Latest Publications
- 23 December 2021
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (1) , 920-932
3D-Printed Fe/γ-Al2O3 Monoliths from MOF-Based Boehmite Inks for the Catalytic Hydroxylation of Phenol
The synthesis of dihydroxybenzenes (DHBZ), essential chemical reagents in numerous industrial processes, with a high degree of selectivity and yield from the hydroxylation of phenol is progressively attracting great interest in the catalysis field. Furthermore, the additive manufacturing of catalysts to produce 3D printed monoliths would provide additional benefits to enhance the DHBZ synthesis performance. Herein, 3D cellular Fe/γ-Al2O3 monoliths with a total porosity of 88% and low density (0.43 g·cm–3) are printed by Robocasting from pseudoplastic Fe-metal-organic frameworks (Fe-MOF)-based aqueous boehmite inks to develop catalytic monoliths containing a Fe network of dispersed clusters (≤5 μm), nanoclusters (2O3 monoliths and with the following operating conditions: Cphenol,0 = 0.33 M, Cphenol,0/CH2O2,0 = 1:1 molar, WR = 2.2 g, and space time (τ = W·QL–1) = 0–147 gcat·h·L–1. The scaffolds present a good mechanical resistance (∼1 MPa) to be employed in a catalytic reactor and do not show any cracks or damage after the chemical reaction. DHBZ selectivity (SDHBZ) of 100% with a yield (YDHBZ) of 32% due to the presence of the Fe network in the monoliths is reported at 85 °C, which represents an improved synthesis performance as compared to that obtained by using the conventional Enichem process and the well-known titanium silicalite-1 catalysts (SDHBZ = 99.1% and YDHBZ = 29.6% at 80 °C). This printing strategy allows manufacturing novel 3D structured catalysts for the synthesis of critical chemical compounds with higher reaction efficiencies.
- 23 December 2021
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (1) , 920-932
3D-Printed Fe/γ-Al2O3 Monoliths from MOF-Based Boehmite Inks for the Catalytic Hydroxylation of Phenol
The synthesis of dihydroxybenzenes (DHBZ), essential chemical reagents in numerous industrial processes, with a high degree of selectivity and yield from the hydroxylation of phenol is progressively attracting great interest in the catalysis field. Furthermore, the additive manufacturing of catalysts to produce 3D printed monoliths would provide additional benefits to enhance the DHBZ synthesis performance. Herein, 3D cellular Fe/γ-Al2O3 monoliths with a total porosity of 88% and low density (0.43 g·cm–3) are printed by Robocasting from pseudoplastic Fe-metal-organic frameworks (Fe-MOF)-based aqueous boehmite inks to develop catalytic monoliths containing a Fe network of dispersed clusters (≤5 μm), nanoclusters (2O3 monoliths and with the following operating conditions: Cphenol,0 = 0.33 M, Cphenol,0/CH2O2,0 = 1:1 molar, WR = 2.2 g, and space time (τ = W·QL–1) = 0–147 gcat·h·L–1. The scaffolds present a good mechanical resistance (∼1 MPa) to be employed in a catalytic reactor and do not show any cracks or damage after the chemical reaction. DHBZ selectivity (SDHBZ) of 100% with a yield (YDHBZ) of 32% due to the presence of the Fe network in the monoliths is reported at 85 °C, which represents an improved synthesis performance as compared to that obtained by using the conventional Enichem process and the well-known titanium silicalite-1 catalysts (SDHBZ = 99.1% and YDHBZ = 29.6% at 80 °C). This printing strategy allows manufacturing novel 3D structured catalysts for the synthesis of critical chemical compounds with higher reaction efficiencies.
- 19 July 2021
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 60 (30) , 11063-11069
Layer-by-Layer Method to Prepare Three-Dimensional Reduced Graphene Materials with Controlled Architectures Using SiO2 as a Sacrificial Template
- 19 July 2021
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 60 (30) , 11063-11069
Layer-by-Layer Method to Prepare Three-Dimensional Reduced Graphene Materials with Controlled Architectures Using SiO2 as a Sacrificial Template