Hossein Jodeiri Akbari Fam
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hossein Jodeiri Akbari Fam has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Mostafa Naghizadeh
Laurentian University
3 shared publications - Oz Yilmaz
GeoTomo LLC 2 , Houston, Texas, USA
3 shared publications - Richard Stuart Smith
Harquail School of Earth Sciences, Laurentian University , 395 Ramsey Lake Road, Sudbury, Ontario P3E 2C6
2 shared publications Saeid Cheraghi
Laurentian University, Harquail School of Earth Sciences, Sudbury, Ontario, Canada.;;;;;;;;;;
2 shared publicationsAdemola Adetunji
Laurentian University, Harquail School of Earth Sciences, Sudbury, Ontario, Canada.;;;;;;;;;;
1 shared publicationAmir Maleki
Wallbridge Mining Company, Sudbury, Ontario, Canada.
1 shared publication
Latest Publications
- 1 April 2023
- Published by Society of Exploration Geophysicists in The Leading Edge
- Vol. 42 (4) , 245-255
Geophysical transects in the Abitibi greenstone belt of Canada from the mineral-exploration-oriented Metal Earth project
The Metal Earth project integrates geophysics, geology, geochemistry, and geochronology to improve the understanding of metal endowment in Precambrian terranes. Magnetics (airborne), gravity, magnetotellurics, and reflection seismic methods are the primary geophysical tools employed. Data were collected along 13 transects in the initial phase of the project. All geophysical tools are crucial for understanding the structure of the shallow, middle, and deeper crust and identifying pathways along which the constituents of critical minerals might have migrated from a source to a deposit. The magnetic data are used predominantly to help map the geology away from the transects, and the gravity data are useful for extending the near-surface geology to depths up to 8 km. The magnetotelluric data show the upper Archean crust to about 10 km as highly resistive, except for some conductive subvertical zones that correspond to major deformation zones, many of which are known to be metalliferous. This suggests that these conductive zones could have been hydrothermal fluid pathways feeding the mineral deposits. These zones can be traced to larger horizontal conductive zones in the midcrust. The seismic reflection data are consistent with and complement this: the upper crust is primarily nonreflective; however, the midcrust shows many horizontal reflectors, usually with a consistent dip to the north. Processing crooked-line seismic data is problematic, and techniques have been developed to improve the imaging, including multifocusing, 3D processing, full-waveform inversion, and cross-dip moveout methods. Passive seismic data have also been collected. Ambient-noise surface-wave tomography can be used to infer broad zones of similar seismic velocity between major reflectors, while receiver function analysis has been used to identify deeper structures such as horizontal features at or below the Moho and a dipping structure evident to about 70 km depth.
- 1 April 2023
- Published by Society of Exploration Geophysicists in The Leading Edge
- Vol. 42 (4) , 245-255
Geophysical transects in the Abitibi greenstone belt of Canada from the mineral-exploration-oriented Metal Earth project
The Metal Earth project integrates geophysics, geology, geochemistry, and geochronology to improve the understanding of metal endowment in Precambrian terranes. Magnetics (airborne), gravity, magnetotellurics, and reflection seismic methods are the primary geophysical tools employed. Data were collected along 13 transects in the initial phase of the project. All geophysical tools are crucial for understanding the structure of the shallow, middle, and deeper crust and identifying pathways along which the constituents of critical minerals might have migrated from a source to a deposit. The magnetic data are used predominantly to help map the geology away from the transects, and the gravity data are useful for extending the near-surface geology to depths up to 8 km. The magnetotelluric data show the upper Archean crust to about 10 km as highly resistive, except for some conductive subvertical zones that correspond to major deformation zones, many of which are known to be metalliferous. This suggests that these conductive zones could have been hydrothermal fluid pathways feeding the mineral deposits. These zones can be traced to larger horizontal conductive zones in the midcrust. The seismic reflection data are consistent with and complement this: the upper crust is primarily nonreflective; however, the midcrust shows many horizontal reflectors, usually with a consistent dip to the north. Processing crooked-line seismic data is problematic, and techniques have been developed to improve the imaging, including multifocusing, 3D processing, full-waveform inversion, and cross-dip moveout methods. Passive seismic data have also been collected. Ambient-noise surface-wave tomography can be used to infer broad zones of similar seismic velocity between major reflectors, while receiver function analysis has been used to identify deeper structures such as horizontal features at or below the Moho and a dipping structure evident to about 70 km depth.
- 7 December 2022
- Published by Wiley in Geophysical Prospecting
- Vol. 71 (7) , 1152-1180
High‐resolution 2.5D multifocusing imaging of a crooked seismic profile in a crystalline rock environment: Results from the Larder Lake area, Ontario, Canada
- 7 December 2022
- Published by Wiley in Geophysical Prospecting
- Vol. 71 (7) , 1152-1180
High‐resolution 2.5D multifocusing imaging of a crooked seismic profile in a crystalline rock environment: Results from the Larder Lake area, Ontario, Canada
- 5 October 2022
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 88 (1) , T13-T31
3D generalized spherical multifocusing seismic imaging
We introduce a 3D generalized spherical multifocusing (GSMF) algorithm to generate a high-resolution 3D stacked volume that is equivalent to a synthesized 3D zero-offset wavefield for crooked-line/3D seismic data. The proposed algorithm can be applied to arbitrary recording geometry from areas with irregular topography, a complex near the surface, and complex subsurface. The 3D GSMF method simultaneously corrects for elevation statics, nonhyperbolic moveout associated with reflections beneath complex overburden structures, and azimuth-dependent dip-moveout effects. In addition, the formulation is dually generalized for the optical domain and the effective medium. The optical domain and effective medium parameterizations account for heterogeneity either by shifting the reference time to project the problem into the optical image space or by adjusting the velocity of an effective overburden, respectively. We test the performance of our method using 3D synthetic data with 3D and crooked-line surveys. The numerical tests have shown that the accuracy of the new approximation is significant for gently to highly curved interfaces beneath low to relatively high heterogeneous overburden with rugged topography, even at large offsets and midpoint separations. In addition, we rigorously evaluate the method using 3D real seismic data acquired over a complex thrust-belt area with rugged terrain. Compared with conventional 3D stacking, the new formulation yields a high resolution and accurate seismic stacked volume from land seismic data collected with arbitrary 3D geometries.
- 5 October 2022
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 88 (1) , T13-T31
3D generalized spherical multifocusing seismic imaging
We introduce a 3D generalized spherical multifocusing (GSMF) algorithm to generate a high-resolution 3D stacked volume that is equivalent to a synthesized 3D zero-offset wavefield for crooked-line/3D seismic data. The proposed algorithm can be applied to arbitrary recording geometry from areas with irregular topography, a complex near the surface, and complex subsurface. The 3D GSMF method simultaneously corrects for elevation statics, nonhyperbolic moveout associated with reflections beneath complex overburden structures, and azimuth-dependent dip-moveout effects. In addition, the formulation is dually generalized for the optical domain and the effective medium. The optical domain and effective medium parameterizations account for heterogeneity either by shifting the reference time to project the problem into the optical image space or by adjusting the velocity of an effective overburden, respectively. We test the performance of our method using 3D synthetic data with 3D and crooked-line surveys. The numerical tests have shown that the accuracy of the new approximation is significant for gently to highly curved interfaces beneath low to relatively high heterogeneous overburden with rugged topography, even at large offsets and midpoint separations. In addition, we rigorously evaluate the method using 3D real seismic data acquired over a complex thrust-belt area with rugged terrain. Compared with conventional 3D stacking, the new formulation yields a high resolution and accurate seismic stacked volume from land seismic data collected with arbitrary 3D geometries.
- 1 January 2022
- Published by Society of Exploration Geophysicists in The Leading Edge
- Vol. 41 (1) , 40-46
A reality check on full-wave inversion applied to land seismic data for near-surface modeling
We evaluate the performance of traveltime tomography and full-wave inversion (FWI) for near-surface modeling using the data from a shallow seismic field experiment. Eight boreholes up to 20-m depth have been drilled along the seismic line traverse to verify the accuracy of the P-wave velocity-depth model estimated by seismic inversion. The velocity-depth model of the soil column estimated by traveltime tomography is in good agreement with the borehole data. We used the traveltime tomography model as an initial model and performed FWI. Full-wave acoustic and elastic inversions, however, have failed to converge to a velocity-depth model that desirably should be a high-resolution version of the model estimated by traveltime tomography. Moreover, there are significant discrepancies between the estimated models and the borehole data. It is understandable why full-wave acoustic inversion would fail — land seismic data inherently are elastic wavefields. The question is: Why does full-wave elastic inversion also fail? The strategy to prevent full-wave elastic inversion of vertical-component geophone data trapped in a local minimum that results in a physically implausible near-surface model may be cascaded inversion. Specifically, we perform traveltime tomography to estimate a P-wave velocity-depth model for the near-surface and Rayleigh-wave inversion to estimate an S-wave velocity-depth model for the near-surface, then use the resulting pairs of models as the initial models for the subsequent full-wave elastic inversion. Nonetheless, as demonstrated by the field data example here, the elastic-wave inversion yields a near-surface solution that still is not in agreement with the borehole data. Here, we investigate the limitations of FWI applied to land seismic data for near-surface modeling.
- 1 January 2022
- Published by Society of Exploration Geophysicists in The Leading Edge
- Vol. 41 (1) , 40-46
A reality check on full-wave inversion applied to land seismic data for near-surface modeling
We evaluate the performance of traveltime tomography and full-wave inversion (FWI) for near-surface modeling using the data from a shallow seismic field experiment. Eight boreholes up to 20-m depth have been drilled along the seismic line traverse to verify the accuracy of the P-wave velocity-depth model estimated by seismic inversion. The velocity-depth model of the soil column estimated by traveltime tomography is in good agreement with the borehole data. We used the traveltime tomography model as an initial model and performed FWI. Full-wave acoustic and elastic inversions, however, have failed to converge to a velocity-depth model that desirably should be a high-resolution version of the model estimated by traveltime tomography. Moreover, there are significant discrepancies between the estimated models and the borehole data. It is understandable why full-wave acoustic inversion would fail — land seismic data inherently are elastic wavefields. The question is: Why does full-wave elastic inversion also fail? The strategy to prevent full-wave elastic inversion of vertical-component geophone data trapped in a local minimum that results in a physically implausible near-surface model may be cascaded inversion. Specifically, we perform traveltime tomography to estimate a P-wave velocity-depth model for the near-surface and Rayleigh-wave inversion to estimate an S-wave velocity-depth model for the near-surface, then use the resulting pairs of models as the initial models for the subsequent full-wave elastic inversion. Nonetheless, as demonstrated by the field data example here, the elastic-wave inversion yields a near-surface solution that still is not in agreement with the borehole data. Here, we investigate the limitations of FWI applied to land seismic data for near-surface modeling.
- 28 July 2021
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 86 (6) , S355-S369
2.5D multifocusing imaging of crooked-line seismic surveys
Two-dimensional seismic surveys often are conducted along crooked-line traverses due to the inaccessibility of rugged terrains, logistical and environmental restrictions, and budget limitations. The crookedness of line traverses, irregular topography, and complex subsurface geology with steeply dipping and curved interfaces could adversely affect the signal-to-noise-ratio of the data. The crooked-line geometry violates the assumption of a straight-line survey that is a basic principle behind the 2D multifocusing (MF) method and leads to crossline spread of midpoints. In addition, the crooked-line geometry can give rise to potential pitfalls and artifacts and thus leads to difficulties in imaging and velocity-depth model estimation. We develop a novel MF algorithm for crooked-line seismic data and revise the traveltime equation accordingly to achieve better signal alignment before stacking. Specifically, we have developed a 2.5D MF reflection traveltime equation that explicitly takes into account the midpoint dispersion and cross-dip effects. The new formulation corrects for normal, inline, and crossline dip moveouts (DMOs) simultaneously, which is significantly more accurate than removing these effects sequentially. Applying normal moveout, DMO, and cross-DMO separately tends to result in significant errors, especially for large offsets. The 2.5D MF method can perform automatically with a coherence-based global optimization search on data. We investigated the accuracy of the new formulation by testing it on different synthetic models and a real seismic data set. Applying our approach to the real data led to a high-resolution seismic image with a significant quality improvement compared to the conventional method. Numerical tests indicate that the new formula can accurately focus the primary reflections at their correct location, remove anomalous dip-dependent velocities, and extract true dips from seismic data for structural interpretation. Our method efficiently projects and extracts valuable 3D structural information when applied to crooked-line seismic surveys.
- 28 July 2021
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 86 (6) , S355-S369
2.5D multifocusing imaging of crooked-line seismic surveys
Two-dimensional seismic surveys often are conducted along crooked-line traverses due to the inaccessibility of rugged terrains, logistical and environmental restrictions, and budget limitations. The crookedness of line traverses, irregular topography, and complex subsurface geology with steeply dipping and curved interfaces could adversely affect the signal-to-noise-ratio of the data. The crooked-line geometry violates the assumption of a straight-line survey that is a basic principle behind the 2D multifocusing (MF) method and leads to crossline spread of midpoints. In addition, the crooked-line geometry can give rise to potential pitfalls and artifacts and thus leads to difficulties in imaging and velocity-depth model estimation. We develop a novel MF algorithm for crooked-line seismic data and revise the traveltime equation accordingly to achieve better signal alignment before stacking. Specifically, we have developed a 2.5D MF reflection traveltime equation that explicitly takes into account the midpoint dispersion and cross-dip effects. The new formulation corrects for normal, inline, and crossline dip moveouts (DMOs) simultaneously, which is significantly more accurate than removing these effects sequentially. Applying normal moveout, DMO, and cross-DMO separately tends to result in significant errors, especially for large offsets. The 2.5D MF method can perform automatically with a coherence-based global optimization search on data. We investigated the accuracy of the new formulation by testing it on different synthetic models and a real seismic data set. Applying our approach to the real data led to a high-resolution seismic image with a significant quality improvement compared to the conventional method. Numerical tests indicate that the new formula can accurately focus the primary reflections at their correct location, remove anomalous dip-dependent velocities, and extract true dips from seismic data for structural interpretation. Our method efficiently projects and extracts valuable 3D structural information when applied to crooked-line seismic surveys.