MHMichael A. Hicks

Michael A. Hicks

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Michael A. Hicks has a total of 48 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Influence of surcharge loading and spatial variability on 3D embankment failure modes and consequences

    by Wei Huang, Zheng Guan, Michael A. Hicks

    1. In engineering practice, safety assessments of long engineered slopes such as railway embankments are typically based on cross-sectional slope stability checks under design loads (e.g. self-weig...

  • Open Access

    Application of the random finite element method to assess traditional techniques used to analyse free-field ground response and liquefaction triggering

    by J. León González Acosta, Abraham P. van Den Eijnden, Michael A. Hicks

    Traditional one-dimensional (1D) techniques for analysing free-field ground response and liquefaction triggering rely on the assumption of ideal, homogeneous soil deposits, which are hardly ever encountered. This paper highlights the inaccuracies and limitations of 1D schemes and the motivation for two-dimensional (2D) strategies using the random finite element method (RFEM). Through Monte Carlo simulations, the 2D dynamic response of various soil domains, considering the impact of spatial variability of void ratio on liquefaction potential, is analysed. Each 2D realisation has been re-examined by splitting the domain into 1D soil columns while preserving similar variability attributes. The results reveal significant differences. While 2D schemes show a reduced variability in the ground surface responses and more realistic liquefaction spreading compared to 1D simulations, 2D schemes indicate more severe impacts on ground surface accelerations, response spectra peak values, and energy released. For site response analysis using a homogeneous soil profile, a characteristic void ratio value based on the mean minus 2 standard deviations is suitable for high PGA potential scenarios. However, the differences in responses between 1D and 2D schemes diminish if the input earthquake acceleration is not strong enough to cause liquefaction.

  • Open Access

    A FEM-DEM model for immersed granular flows: From unresolved to semi-resolved scales

    by Michel Henry, Laura Valentina Cote Martinez, Cristina Jommi, Michael Hicks, Jonathan Lambrechts, Vincent Legat, Miguel Cabrera

    This work presents a coupling between the Finite Element Method (FEM) and the Discrete Element Method (DEM) to simulate immersed granular flows, transitioning from an unresolved to a semi-resolved representation. This refers to fluid discretisations ranging from a scale much larger than the grain size to one comparable to the grain size. The fluid phase is modelled using the Volume-Averaged Navier-Stokes (VANS) equations, which are solved with the FEM, while the granular phase is represented by the DEM with Non-Smooth Contact Dynamics (NSCD). An overlap-wise spatial coupling is proposed to bridge the gap between unresolved and semi-resolved scales. The method is validated by numerically reproducing experimental work on the fluidisation of a sand layer. Accuracy and stability are assessed by varying the mesh size down to half the grain diameter.

  • Open Access

    Tied Free-Field boundaries to enhance numerical accuracy of earthquake simulations

    by J González Acosta, Abraham Van Den Eijnden, Michael Hicks

    Free-Field (FF) boundaries have previously been developed to replicate the (infinite) far-free-field domain in the simulation of earthquake loading problems. Although they can yield accurate results under certain conditions, it has been observed that significant problems can occur if the behaviour of the material near the boundaries is highly non-linear or incorporates cyclic attributes, or if the boundaries are located close to the domain of interest. To address the inaccuracies caused by the use of traditional FF boundaries, a novel technique is proposed: Tied Free-Fields. This technique combines the principles of both standard earthquake boundary conditions (that is, Tied-Degree (TD) and FF boundaries) to accommodate earthquake loading at the domain boundaries in a direct and economical fashion. The proposed solution has been tested using one and two-dimensional benchmarks and an advanced constitutive model. The results show a significant improvement in accuracy over traditional FF boundaries in the modelling of surface settlements and computed energy released, as well as a significant improvement in computational efficiency over TD boundaries in the modelling of asymmetric problem domains.


  • Open Access

    Application of the random material point method to 3D slope failures

    by Guido Remmerswaal, Philip J. Vardon, Michael A. Hicks

    Three-dimensional and spatial variability effects on slope failure processes are investigated for an idealised slope stability problem with the random material point method (RMPM). A 45 degree slope is brought to failure by either its own weight or by a combination of its own weight and an additional surface load applied at the crest. The ultimate failure load and potential failure processes are studied for various (heterogeneous) material strength profiles. In 3D, failures tend to spread sideways and backwards. For the slope geometry considered, the resistance to initial and secondary failures in 3D simulations tends to be higher than in 2D simulations, probably due to the additional resistance from the ends of the failure surfaces. The failure behaviour changes when a depth trend in the material strength is introduced. A depth trend in the material strength triggers a flow-like failure process, instead of distinct (approximately) circular failure surfaces which are encountered in a material without a depth trend. The flow-like behaviour causes an expansion in the failure zone in all directions while avoiding (where possible) local strong zones.


  • A state-dependent multilaminate constitutive model for anisotropic sands

    by Hilmi Bayraktaroglu, Michael A. Hicks, Mandy Korff, Vahid Galavi

    Experimental studies show that initial fabric and its evolution under different stress paths greatly influences soil behaviour. Even though different sample preparation methods create different inherent anisotropies and cause different material responses, the same initial fabric structure under different stress paths also results in different material behaviours. In this paper, a simple state-dependent, bounding surface-based elastoplastic constitutive model, which can simulate the anisotropic nature of sands including the effect of principal stress rotation, is described. The model is developed based on a semi-micromechanical concept within the multilaminate framework and, to include the inherent anisotropy of sand, a deviatoric fabric tensor describing the initial microstructure is introduced. In addition, a fabric evolution rule compatible with anisotropic critical state theory is employed to describe the evolving fabric structure and induced anisotropy towards the critical state. In contrast to the classical strain-driven formulation for fabric evolution, a micro-level evolution rule is proposed. This paper presents concise theoretical aspects of the multilaminate framework and the anisotropic elastoplastic constitutive formulation. The model's capability under drained and undrained monotonic loading conditions at different stress states, relative densities and principal stress orientations is demonstrated by simulating experimental data for Toyoura sand.


  • Open Access

    Thermomechanical behaviour of soils and soil-structure interfaces in thermo-active geo-structures

    by Ali Golchin, Michael A. Hicks, Philip J. Vardon

    In recent years, the demand for sustainable, low carbon-emission energy solutions has risen, leading to an increased interest in shallow geothermal energy systems. These systems, such as ground source heat pump (GSHP) systems, harness the Earth's stable temperature at shallow depths as a heat sink and source of energy. Energy piles are a type of GSHP system that performs both structural and thermal energy-exchange functions [e.g. 1]. Despite the technological advantages of these systems, understanding the thermomechanical behavior of soils and soil-structure interfaces remains a challenge, limiting safe, efficient, and cost-effective designs. This research aimed to address these challenges by developing thermomechanical constitutive models for soils, implementing these models in boundary-value solvers, and analyzing the experimental results from direct shear tests performed on soils to understand their thermomechanical behavior at the soil-structure interface. By comprehensively examining the complex interactions between energy piles and surrounding soils, the research results offer a foundation for improved design standards and implementation. The methodology followed the following three main directions: Development of thermomechanical constitutive models for soils: A thermomechanical constitutive model based on the thermodynamic framework of Hyperelasticity-Hyperplasticity was developed to capture the major thermomechanical behaviors of fine-grained soils when subjected to temperature variations [2]. By utilizing a flexible yield surface within the framework, a more precise representation of soil behavior can be simulated. This framework was extended to develop a dual-surface thermomechanical model with an additional yield surface and a temperature-dependent kinematic rule to capture the shakedown behavior of soils subjected to heating-cooling cycles more accurately [3], as illustrated in Figure 1 (left) where two triaxial tests are simulated. The enhanced model addresses the need for improved representation of diverse soil behaviors and their implications for the performance of energy pile systems. Numerical aspects to improve simulation capability: A new flexible yield function was introduced that addresses the common issue of undesired elastic domains and erratic or divergent gradients in the numerical implementation of constitutive models with flexible yield surfaces and plastic potentials for use in implicit stress integration schemes [4]. By providing a robust and efficient framework for return mapping algorithms, this new yield function supports more precise simulations of soil behavior. An advanced numerical algorithm was devised to implement the thermomechanical constitutive model within a boundary-value solver such as the finite-element method [5]. The algorithm incorporates Gibbs energy potential, Lode angle dependency, and additional features to ensure accuracy, robustness, effectiveness, and convergence during simulations. Experimental analysis of the soil-structure interface including the impact of initial shear stress and thermal cycles: Laboratory-scale direct shear tests were conducted on fine- and coarse-grained soils to investigate their thermomechanical behavior at the interface with a concrete structure [6, 7]. A focus here was on the impact of thermal cycles; in particular, under realistic working stress conditions. Figure 1 (right) presents example results, where thermal cycles are applied in a temperature controlled shear box, with a clay-concrete interface which had a constant shear stress. Thermal creep is observed, which also has a hardening effect on future shear loading. By exploring the variations in soil behavior under differing temperature and loading conditions, the research deepens the understanding of the complexity inherent in soil-pile interactions for energy pile applications. This comprehensive investigation of the thermomechanical behavior of soils and soil-structure interfaces in the context of thermo-active geo-structures represents an essential step forward in optimizing energy pile systems for diverse applications. The developed constitutive models, numerical algorithms, and experimental analyses contribute valuable insights for improving energy pile design, ultimately leading to more efficient, safe, and cost-effective solutions. Future research should continue refining our understanding of the complex processes governing soil behavior in energy pile systems, with emphasis on consolidating the developed models and their implementation for a range of soil types and conditions. Additionally, further experimental studies should focus on elucidating the interactions between soils, piles, and the broader environment to identify potential opportunities for maximizing the performance of energy pile systems through innovative design and implementation.

  • On worst-case correlation length in probabilistic 3D bearing capacity assessments

    by Yajun Li, Jianguang Li, Nengxiong Xu, Gordon A. Fenton, Philip J. Vardon, Michael A. Hicks

    Correlation length or scale of fluctuation (SOF) is often used as a primary parameter in defining the spatial correlation characteristics of varying soil properties. However, geotechnical site investigations are rather limited so that proper determination of correlation length is not always possible. The concept of a worst-case correlation length thus has important implications in reliability-based designs. In the case of insufficient information, the worst-case correlation length can be used to conservatively estimate the reliability or probability of failure of geotechnical structures. However, the definition of the worst-case correlation length in the literature is not very clear and has been seen in some investigations to not exist. This paper, in the context of bearing capacity of 3D spatially varying soils, investigates the worst-case correlation length based on different definitions to clarify past findings. Further analyses provide insight into practical applications, where the impact of site sampled data and realistic uncertainties are considered. Using realistic values of the coefficient of variation, and taking account of the distance at which site investigation is likely to occur from the loaded area, a worst-case SOF is identified and found to be similar using all definitions.


  • Open Access

    Effect of uncertainties in geometry, inter-layer boundary and shear strength properties on the probabilistic stability of a 3D embankment slope

    by Divya Varkey, Michael A. Hicks, Philip J. Vardon

    This paper investigates the influence of three forms of uncertainty on the probabilistic stability of an idealised 3D embankment slope. These are: 1D spatial variability in the external geometry of the slope along its length, 2D spatial variability in the depth of the boundary between the embankment material and the foundation layer, and 3D spatial variability in the shear strength properties of the slope and foundation materials. The relative influence of each uncertainty has been investigated using the random finite element method, based on statistics consistent with a Dutch regional dyke. The results indicate that, for such a structure, the soil spatial variability has a much greater influence than uncertainties relating to embankment geometry and inter-layer boundary. In particular, it is demonstrated that the spatial correlation of material properties along the length of the embankment has a greater influence on the probabilistic characteristics of the embankment slope stability and failure consequence than the spatial correlation of properties perpendicular to it. A worst case scale of fluctuation for the material properties is identified.


  • Open Access

    Fully implicit, stabilised, three-field material point method for dynamic coupled problems

    by Xiangcou Zheng, Federico Pisanò, Philip J. Vardon, Michael A. Hicks

    This study presents the formulation and implementation of a fully implicit stabilised Material Point Method (MPM) for dynamic problems in two-phase porous media. In particular, the proposed method is built on a three-field formulation of the governing conservation laws, which uses solid displacement, pore pressure and fluid displacement as primary variables (u–p–Uformulation). Stress oscillations associated with grid-crossing and pore pressure instabilities near the undrained/incompressible limit are mitigated by implementing enhanced shape functions according to the Generalised Interpolation Material Point (GIMP) method, as well as a patch recovery of pore pressures – from background nodes to material points – based on the same Moving Least Square Approximation (MLSA) approach investigated by Zheng et al. [1]. The accuracy and computational convenience of the proposed method are discussed with reference to several poroelastic verification examples, spanning different regimes of material deformation (small versus large) and dynamic motion (slow versus fast). The computational performance of the proposed method in combination with the PARDISO solver for the discrete linear system is also compared to explicit MPM modelling [1] in terms of accuracy, convergence rate, and computation time.