TNTatsuya Nakazawa

Tatsuya Nakazawa

*This is an algorithmically generated author record based on publicly available information.

Tatsuya Nakazawa has a total of 45 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Elucidation of Enhanced Lysine Sensing via Pt-Functionalized 2D WS 2 for Biosensing Applications

    by Jisang Yoo, Iaan Cho, Sangyoon Lee, Jaehyeok Kim, Tatsuya Nakazawa, Inkyu Sohn, Sanghun Lee, Jeongwoo Seo, Jusang Park, Bonggeun Shong, et al.

    Amino acids (AAs) are vital biomolecules and important biomarkers for disease diagnosis, motivating the development of sensitive and selective detection methods. Among them, lysine (LYS) plays a crucial role in protein synthesis, and abnormal concentrations are linked to disorders such as anemia, neurological agitation, and cardiovascular disease. Therefore, the accurate detection of LYS is essential. Two-dimensional transition metal dichalcogenides (2D TMDCs) have emerged as promising receptor-free biosensing platforms due to their direct charge transfer capability upon biomolecular adsorption. However, pristine TMDCs often exhibit limited sensitivity and selectivity. Here, we functionalized monolayer WS2 (1L-WS2) with platinum nanoparticles (Pt NPs) using atomic layer deposition (ALD) to enhance biosensing performance. Pt NPs induced n-type doping of the WS2 channel, thereby improving its sensitivity to LYS. The Pt NPs predominantly exhibited (111) facets, enabling stronger covalent or hydrogen bonding interactions with amino acids. The Pt-functionalized WS2 (Pt-WS2) biosensors showed markedly improved sensitivity and selectivity toward LYS compared with pristine WS2. Density functional theory (DFT) calculations further revealed increased adsorption energy and charge transfer of LYS on Pt-WS2, corroborating the experimental results. These findings highlight metal NP functionalization as an effective strategy to advance 2D TMDC-based biosensors for practical applications.


  • Noble-metal-functionalized MoS₂ catalysts prepared by atomic layer deposition for hydrogen evolution reaction

    by Soo Hwan Min, Jungyub Lee, Sangyoon Lee, Inkyu Sohn, Tatsuya Nakazawa, Jaehyeok Kim, Dain Shin, Yusuke Ohshima, Seung-Min Chung, Hyungjun Kim

  • Growth and characterization of Ir3Se8 thin films via chemical vapor deposition for NIR photodetector and gas sensor applications

    by Jaehyeok Kim, Minji Kim, Inkyu Sohn, Jisang Yoo, Taehyun Kim, Chanju Lee, Yusuke Ohshima, Shinichi Kato, Tatsuya Nakazawa, Hyungjun Kim


  • Systematic investigation of the properties of ordered B2 structure Ru–Al–Ni alloys

    by Fumihiko Saito, Tatsuya Nakazawa, Shuichi Kubota

  • Exploring the growth and optoelectronic properties of PtSe2 films via pulsed chemical vapor deposition

    by Jaehyeok Kim, Donghyun Kim, Tatsuya Nakazawa, Seunggyu Na, Sanghun Lee, Seonyeong Park, Yusuke Ohshima, Hiroki Sato, Hyungjun Kim


  • Near‐infrared self‐powered RuS 2 x Se 2−2 x alloy photodetector via chemical vapor deposition RuSe 2 and post‐sulfurization process

    by Jaehyeok Kim, Hwi Yoon, Inkyu Sohn, Tatsuya Nakazawa, Sangyoon Lee, Donghyun Kim, Yusuke Ohshima, Hiroki Sato, Seunggi Seo, Sojeong Eom, et al.

    Ruthenium (Ru)‐based chalcogenide (S, Se) is a promising material in various fields, such as optics, photoelectrodes, and electrocatalysis, owing to its suitable bandgap for generating charge carriers under light illumination ranging from visible to near‐infrared (NIR) and its high absorption coefficient. In this study, we report the synthesis of RuSe 2 thin films by chemical vapor deposition (CVD) with a bandgap matching the NIR region at 0.52 eV. Further, we demonstrated RuS 2 x Se 2−2 x alloy films using the post‐sulfurization process after CVD RuSe 2 with a tunable bandgap from 0.52 to 1.39 eV depending on sulfur composition. Remarkably, RuS 2 x Se 2−2 x alloy film metal–semiconductor–metal (MSM) photodetector sulfurized at 500 °C, with a 0.75 eV bandgap, exhibits enhanced broad absorption across NIR spectral ranges, suppressed dark current and high photoresponsivity in NIR wavelengths range even at zero‐bias. We believe the bandgap‐tunable RuS 2 x Se 2−2 x thin film through an efficient deposition method could be suitable for various optoelectronic applications.


  • Atomic layer deposition of Pt nanoparticles using dimethyl (N, N–dimethyl-3-butene-1-amine−N) platinum and H2 reactant and its application to 2D WS2 photodetectors

    by Dain Shin, Inkyu Sohn, Donghyun Kim, Jaehyeok Kim, Taewook Nam, Youngjun Kim, Jusang Park, Tatsuya Nakazawa, Seung-Min Chung, Hyungjun Kim

    2D transition metal dichalcogenides (2D TMDCs) have thin and flexible structures and can be widely applied to nanoelectronics technology as a representative of 2D materials. Research studies on the surface functionalization of 2D TMDCs with nanoparticles have been actively conducted for fabrication of high-performance devices. Specifically, platinum (Pt) has attracted significant attention as a surface functionalization material in various applications, including photosensors, biosensors, and gas sensors due to its effective catalytic effect and excellent corrosion resistance. However, solution-based methods and PVD technologies, widely used for Pt nanoparticle synthesis, have difficulties forming fine particles dispersed on nanomaterials. Atomic layer deposition (ALD) is emerging as an advantageous method for forming nanoparticles, and dimethyl (N,N-dimethyl-3-buten-1-amine-N) platinum (DDAP) can overcome disadvantages of conventional ALD Pt precursors. In this study, we successfully synthesized Pt films using hydrogen as a new reactant in the DDAP-based ALD Pt process and evaluated formation of nanoparticles on SiO2/Si substrates. Subsequently, the ALD Pt-functionalized photodetector was fabricated with 2D WS2, a representative visible-light photodetector material, and improvement of photocurrent was confirmed by providing additional carriers via the localized surface plasmon resonance phenomenon. Furthermore, preferentially growing at high surface energy points, such as defects on WS2 nanosheets, can suppress the capture of photoexcited electrons by defects, consequently extending the carrier lifetime and preventing surface oxidation of the device. In the wavelength range of 500–1200 nm, the photoresponsivity of the ALD Pt-functionalized WS2 photodetector was improved more than 10–20 times compared to pristine WS2, and the response time was also noticeably improved. This study presents a novel approach to Pt functionalization using ALD, opening new possibilities for advanced nanodevice applications.


  • Development of RuS 2 for near‐infrared photodetector by atomic layer deposition and post‐sulfurization

    by Tatsuya Nakazawa, Donghyun Kim, Jaehyeok Kim, Yohei Kotsugi, Taehoon Cheon, Seung‐Min Chung, Soo‐Hyun Kim, Hyungjun Kim

    The chalcogenides of platinum‐group metals (PGMs) have been known to be present in minerals and the intermediate products of refining. Over recent years, their applications in various fields, including catalysis, have been explored. Given that certain PGM chalcogenides behave as compound semiconductors, they can be used as materials for photodetectors. In this study, RuS 2 , featuring a bandgap suitable for near‐infrared photodetectors, was prepared by forming Ru on a SiO 2 /Si substrate via the atomic layer deposition method using [Ru(TMM)(CO) 3 ] as the precursor. Annealing was conducted at 800 °C for 1 h under H 2 S flow. High‐resolution transmission electron microscopy (HRTEM) and X‐ray diffraction (XRD) analysis clearly confirmed that the as‐deposited hexagonal close‐packed (hcp) Ru transformed to cubic RuS 2 after post‐annealing. The surface morphologies, chemical states, and electrical and optical properties of RuS 2 were investigated. The influence of the metallic Ru surface morphology prior to sulfurization on the reaction between Ru and H 2 S was also discussed. To evaluate the potential of using RuS 2 as a photodetector, a photodetector was fabricated by forming electrodes on RuS 2 to measure its photocurrent under near‐infrared light. Thus, RuS 2 was proven to exhibit a short response time (59 μs) and generate a photocurrent of 84 nA under near‐infrared light at 940 nm.


  • Open Access

    Photocurrent Enhancement of PtSe2 Photodetectors by Using Au Nanorods

    by Tatsuya Nakazawa, Donghyun Kim, Shinichi Kato, Jusang Park, Jwamin Nam, Hyungjun Kim

    Compact and highly sensitive near-infrared photodetectors that are operable at room temperature are required for light detection and ranging and medical devices. Two-dimensional (2D) PtSe2, a transition metal dichalcogenide, is a candidate material for near-infrared light detection. However, the photoresponse properties of 2D PtSe2 are currently inferior to those of commercial materials. The localized surface plasmon resonance of Au has been widely used for photoelectric field enhancement and in photochemical reactions associated with phase relaxation from plasmon states that occur at specific wavelengths. Spherical Au nanocolloids exhibit an extinction peak in the visible light region, whereas nanorods can be tuned to exhibit the extinction peak in the near-infrared region by controlling their aspect ratio. In this study, hybrid Au nanorod/2D PtSe2 structure was fabricated via spin coating nanorods, with plasmon peaks in the near-infrared region, on 2D PtSe2. Furthermore, the effect of the concentration of the nanorod solution on the photoresponse of nanorod/2D PtSe2 was investigated. The photocurrent of 5 nM Au nanorod-coated 2D PtSe2 was fivefold higher than that of bare 2D PtSe2. The responsivity was maximum 908 μW/A at 0.5 V bias voltage. In addition, the photocurrent enhancement mechanism by Au nanorods is discussed.


  • Open Access

    Synthesis and Application of AgBiS2 and Ag2S Nanoinks for the Production of IR Photodetectors

    by Tatsuya Nakazawa, Donghyun Kim, Yusuke Oshima, Hiroki Sato, Jusang Park, Hyungjun Kim

    Nanoinks composed of quantum dots (QDs) are applied in light-receiving devices and light-emitting devices such as solar cells and displays. However, since the most widely used QDs, PbS and CdS, are toxic and environmentally concerning, alternative materials need to be developed. We synthesized and analyzed Ag chalcogenide nanoparticles, including AgBiS2 and Ag2S nanoparticles, which are eco-friendly materials. AgBiS2 and Ag2S QD films were prepared by spin-coating nanoparticle solutions and subsequent heat treatment. The effects of the heat treatment on residual ligands and photoluminescence were determined by surface analysis. The photocurrent response of the AgBiS2 and Ag2S QD films was measured in the near-infrared region, and the effect of the heat treatment temperature was investigated. The results indicate that AgBiS2 and Ag2S are prospective materials for near-infrared photodetectors.