Wen-Hua Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Wen-Hua Li has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Bian Wu
Xidian University
5 shared publications - Hao-Ran Zu
Wuhan University of Technology
5 shared publications - Tao Su
Xidian University
3 shared publications - Jinjin Liu
National Key Laboratory of Antennas and Microwave Technology, Xi’an Key Laboratory of Millimeter Wave and Terahertz Technology, Xidian University, Xi’an 710071, China
2 shared publications Chunmin Cheng
School of Electro-Mechanical Engineering, Xidian University, No. 2, TaiBai South Road, Xi’an, Shaanxi, 710071, China
1 shared publication- Chuqiao Wang
Department of Pharmaceutical Toxicology, School of Pharmacy, China Medical University, Shenyang, 110122, China
1 shared publication
Latest Publications
- 17 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 22 (10) , 2517-2521
Full-Space-Scanning Substrate Integrated Waveguide Antenna With Enhanced Scanning Rate and Efficiency
In this letter, a frequency-controlled substrate integrated waveguide (SIW) leaky-wave antenna (LWA) with enhanced full-space beam scanning from backfire to endfire is proposed. The antenna utilizes a double-layer structure etched with transverse and dumbbell-shaped slots, which can cut off the surface current much more effectively than the single transverse slot. Therefore, the energy leakage rate per unit cell is higher, and the dispersion sensitivity is improved. Based on the equivalent circuit model, the leaky-wave (LW) waveguide is modified to radiate in a single harmonic mode ( n = -1), and the final design has realized the suppression of field cancellation at endfire and open stopband (OSB) at broadside. Simulation results show that the LWA achieves continuous full-space scanning from backfire (-90°) to endfire (+90°) within 21.6-29.4 GHz, with a high average radiation efficiency of 85% and high scanning rate of 5.88°/%. A prototype SIW LWA is fabricated and measured, which agrees well with the simulated one. Experimental results show that this antenna achieves a 180° beam scanning angle and 360° beam coverage range in the band of 22-29.8 GHz with the stable gain varying from 7.8 to 11.6 dBi.
- 17 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 22 (10) , 2517-2521
Full-Space-Scanning Substrate Integrated Waveguide Antenna With Enhanced Scanning Rate and Efficiency
In this letter, a frequency-controlled substrate integrated waveguide (SIW) leaky-wave antenna (LWA) with enhanced full-space beam scanning from backfire to endfire is proposed. The antenna utilizes a double-layer structure etched with transverse and dumbbell-shaped slots, which can cut off the surface current much more effectively than the single transverse slot. Therefore, the energy leakage rate per unit cell is higher, and the dispersion sensitivity is improved. Based on the equivalent circuit model, the leaky-wave (LW) waveguide is modified to radiate in a single harmonic mode ( n = -1), and the final design has realized the suppression of field cancellation at endfire and open stopband (OSB) at broadside. Simulation results show that the LWA achieves continuous full-space scanning from backfire (-90°) to endfire (+90°) within 21.6-29.4 GHz, with a high average radiation efficiency of 85% and high scanning rate of 5.88°/%. A prototype SIW LWA is fabricated and measured, which agrees well with the simulated one. Experimental results show that this antenna achieves a 180° beam scanning angle and 360° beam coverage range in the band of 22-29.8 GHz with the stable gain varying from 7.8 to 11.6 dBi.
- 18 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 70 (7) , 2625-2629
Design of Leaky-Wave Antenna With Wide-Angle Backfire-to-Forward Beam Scanning Based on Generalized Pattern Synthesis
Frequency-scanning antenna has been extensively explored in radar and vehicle communication systems, but it is a challenge to provide methodological guidance to achieve a wide scanning angle. Here, a generalized pattern synthesis method is proposed and a leaky-wave antenna with wide scanning range is designed to verify the technique. First, a generalized antenna element (GAE) is presented, whose main beam can steer continuously with frequency. Meanwhile, the phase constant of the leaky wave determines the beam direction of the array factor. Then, a leaky-wave antenna can steer with a large beam scanning angle and stable gain as patterns of the array factor and the GAE are manipulated simultaneously. To verify, a prototype SIW LWA with double-layer transverse slots is fabricated and measured. Experimental results show this antenna achieves continuous dual-beam scanning from backfire (-90∘) to forward (±20∘) from 12.4 GHz to 19.9 GHz with a total coverage range of 220∘ and the realized gain varying from 8.3 dBi to 12.8 dBi.
- 18 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 70 (7) , 2625-2629
Design of Leaky-Wave Antenna With Wide-Angle Backfire-to-Forward Beam Scanning Based on Generalized Pattern Synthesis
Frequency-scanning antenna has been extensively explored in radar and vehicle communication systems, but it is a challenge to provide methodological guidance to achieve a wide scanning angle. Here, a generalized pattern synthesis method is proposed and a leaky-wave antenna with wide scanning range is designed to verify the technique. First, a generalized antenna element (GAE) is presented, whose main beam can steer continuously with frequency. Meanwhile, the phase constant of the leaky wave determines the beam direction of the array factor. Then, a leaky-wave antenna can steer with a large beam scanning angle and stable gain as patterns of the array factor and the GAE are manipulated simultaneously. To verify, a prototype SIW LWA with double-layer transverse slots is fabricated and measured. Experimental results show this antenna achieves continuous dual-beam scanning from backfire (-90∘) to forward (±20∘) from 12.4 GHz to 19.9 GHz with a total coverage range of 220∘ and the realized gain varying from 8.3 dBi to 12.8 dBi.
- 17 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 70 (6) , 1956-1960
Design of Frequency Scanning Coupled-Resonator Two-Element Array Antenna
In this brief, we present one type of frequency scanning coupled-resonator two-element array antenna and its corresponding equivalent circuit synthesis method. This antenna consists of several series-coupled resonators, the non-radiating resonators are cascaded between two radiating resonators. Since the antenna only has resonators and coupling structures, the threeports coupled-resonator circuit model can be used to explain the working principle and predict the performance of this antenna. The analysis of circuits with different orders indicates that the fractional bandwidth can control the scanning rate and the scanning rate and range can be both affected by the number of non-radiating resonators. Finally, two antennas with three and four resonators are designed in PCB form to validate the method. The third-order (fourth-order) antenna can scan 54.1∘ (64∘) in a 5.87% (5.54%) bandwidth centered at about 3.5 GHz.
- 17 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 70 (6) , 1956-1960
Design of Frequency Scanning Coupled-Resonator Two-Element Array Antenna
In this brief, we present one type of frequency scanning coupled-resonator two-element array antenna and its corresponding equivalent circuit synthesis method. This antenna consists of several series-coupled resonators, the non-radiating resonators are cascaded between two radiating resonators. Since the antenna only has resonators and coupling structures, the threeports coupled-resonator circuit model can be used to explain the working principle and predict the performance of this antenna. The analysis of circuits with different orders indicates that the fractional bandwidth can control the scanning rate and the scanning rate and range can be both affected by the number of non-radiating resonators. Finally, two antennas with three and four resonators are designed in PCB form to validate the method. The third-order (fourth-order) antenna can scan 54.1∘ (64∘) in a 5.87% (5.54%) bandwidth centered at about 3.5 GHz.
- Open Access
- 26 August 2021
- Published by MDPI AG in Electronics
- Vol. 10 (17) , 2056
Wideband and High-Gain Wearable Antenna Array with Specific Absorption Rate Suppression
In this paper, a wideband and high-gain antenna array with specific absorption rate suppression is presented. By adopting the wideband monopole antenna array and the uniplanar compact electromagnetic band gap (UC-EBG) structure, the proposed wearable antenna array can realize a high gain of 11.8–13.6 dBi within the operating band of 4.5–6.5 GHz. The sidelobe level of the proposed wearable antenna array is less than −12 dB, and the cross polarization in the main radiation direction is less than −35 dB. Benefiting from the UC-EBG design, the specific absorption rate is suppressed effectively, guaranteeing the safety of the proposed antenna array to the human body. The proposed antenna array is processed and tested, and the measurement results show good agreement with the simulation results.
- 26 August 2021
- Published by MDPI AG in Electronics
- Vol. 10 (17) , 2056
Open AccessWideband and High-Gain Wearable Antenna Array with Specific Absorption Rate Suppression
In this paper, a wideband and high-gain antenna array with specific absorption rate suppression is presented. By adopting the wideband monopole antenna array and the uniplanar compact electromagnetic band gap (UC-EBG) structure, the proposed wearable antenna array can realize a high gain of 11.8–13.6 dBi within the operating band of 4.5–6.5 GHz. The sidelobe level of the proposed wearable antenna array is less than −12 dB, and the cross polarization in the main radiation direction is less than −35 dB. Benefiting from the UC-EBG design, the specific absorption rate is suppressed effectively, guaranteeing the safety of the proposed antenna array to the human body. The proposed antenna array is processed and tested, and the measurement results show good agreement with the simulation results.
- Open Access
A Low-Profile Ultrawideband Antenna Based on Flexible Graphite Films for On-Body Wearable Applications
This paper presents a low-profile ultrawideband antenna for on-body wearable applications. The proposed antenna is based on highly conductive flexible graphite films (FGF) and polyimide (PI) substrate, which exhibits good benefits such as flexibility, light weight and corrosion resistance compared with traditional materials. By introducing flaring ground and an arrow-shaped slot, better impedance matching is achieved. The wearable antenna achieves a bandwidth of 122% from 0.34 GHz to 1.4 GHz, with a reflection coefficient of less than −10 dB, while exhibiting an omnidirectional pattern in the horizontal plane. To validate the proposed design, the wearable antenna with a profile of ~0.1 mm was fabricated and measured. The measured results are in good agreement with simulated ones, which indicates a suitable candidate for on-body wearable devices.
Open AccessA Low-Profile Ultrawideband Antenna Based on Flexible Graphite Films for On-Body Wearable Applications
This paper presents a low-profile ultrawideband antenna for on-body wearable applications. The proposed antenna is based on highly conductive flexible graphite films (FGF) and polyimide (PI) substrate, which exhibits good benefits such as flexibility, light weight and corrosion resistance compared with traditional materials. By introducing flaring ground and an arrow-shaped slot, better impedance matching is achieved. The wearable antenna achieves a bandwidth of 122% from 0.34 GHz to 1.4 GHz, with a reflection coefficient of less than −10 dB, while exhibiting an omnidirectional pattern in the horizontal plane. To validate the proposed design, the wearable antenna with a profile of ~0.1 mm was fabricated and measured. The measured results are in good agreement with simulated ones, which indicates a suitable candidate for on-body wearable devices.
- 24 December 2020
- Published by Bentham Science Publishers Ltd. in Recent Patents on Nanotechnology
- Vol. 14 (4) , 294-306
Research Progress on Thermal Conductivity of Graphdiyne Nanoribbons and its Defects: A Review
Background: Graphdiyne has a unique pi-conjugated structure, perfect pore distribution and adjustable electronic properties of sp2, sp hybrid planar framework. Due to the presence of acetylenic bonds, it has more excellent properties compared to grapheme, such as a unique structure-dependent Dirac cone, abundant carbon bonds and a large bandgap. As one of the important raw materials for nanodevices, it is extremely important to study the thermal properties of graphdiyne nanoribbon. Objective: This paper mainly introduces and discusses recent academic research and patents on the preparation methods and thermal conductivity of graphdiyne nanoribbons. Besides, the applications in engineering and vacancy defects in the preparation process of graphdiyne are described. Methods: Firstly, taking thermal conductivity as an index, the thermal conductivity of graphdiyne with various vacancy defects is discussed from the aspects of length, defect location and defect type. In addition, the graphdiyne nanoribbons were laterally compared with the thermal conductivity of the graphene nanoribbons. Results: The thermal conductivity of graphdiyne with defects increases with the length and width, which is lower than the intrinsic graphdiyne. The thermal conductivity of the acetylene chain lacking one carbon atom is higher than the one lacking the benzene ring. Typically, the thermal conductivity is larger in armchair than that of zigzag in the same size. Moreover Conclusion: Due to the unique structure and electronic characteristics, graphdiyne has provoked an extensive research interest in the field of nanoscience. Graphdiyne is considered as one of the most promising materials of next-generation electronic devices.
- 24 December 2020
- Published by Bentham Science Publishers Ltd. in Recent Patents on Nanotechnology
- Vol. 14 (4) , 294-306
Research Progress on Thermal Conductivity of Graphdiyne Nanoribbons and its Defects: A Review
Background: Graphdiyne has a unique pi-conjugated structure, perfect pore distribution and adjustable electronic properties of sp2, sp hybrid planar framework. Due to the presence of acetylenic bonds, it has more excellent properties compared to grapheme, such as a unique structure-dependent Dirac cone, abundant carbon bonds and a large bandgap. As one of the important raw materials for nanodevices, it is extremely important to study the thermal properties of graphdiyne nanoribbon. Objective: This paper mainly introduces and discusses recent academic research and patents on the preparation methods and thermal conductivity of graphdiyne nanoribbons. Besides, the applications in engineering and vacancy defects in the preparation process of graphdiyne are described. Methods: Firstly, taking thermal conductivity as an index, the thermal conductivity of graphdiyne with various vacancy defects is discussed from the aspects of length, defect location and defect type. In addition, the graphdiyne nanoribbons were laterally compared with the thermal conductivity of the graphene nanoribbons. Results: The thermal conductivity of graphdiyne with defects increases with the length and width, which is lower than the intrinsic graphdiyne. The thermal conductivity of the acetylene chain lacking one carbon atom is higher than the one lacking the benzene ring. Typically, the thermal conductivity is larger in armchair than that of zigzag in the same size. Moreover Conclusion: Due to the unique structure and electronic characteristics, graphdiyne has provoked an extensive research interest in the field of nanoscience. Graphdiyne is considered as one of the most promising materials of next-generation electronic devices.