Deblu Sahu

There is a high demand for new techniques and applications, which are typically used in materials science for food product development. As a novel food example, sourdough bread (SDB) has been previously evaluated for its prolonged shelf life, positive health effects, and distinctive flavor, yet conventional fermentation is time-consuming. The influence of dough hydration on the properties of SDB prepared using symbiotic culture of bacteria and yeast (SCOBY) derived from black tea Kombucha and how SCOBY reduced the overall time of the starter preparation to ∼16 h were studied. This decrement in the fermentation period, aided by the metabolically active microbial association in SCOBY, acts as a suitable alternative to conventional sourdough cultures that need extended fermentation periods. Several characterization techniques were employed to elucidate the effect of hydration levels (70–90%) of the samples, including impedance profile analysis. Results have revealed that the SDB with an 80% hydration level (SB80) displayed optimal characteristics concerning porosity, starch crystallization, texture, total phenolic content, and viscoelasticity. These findings suggest that SB80 attained a stable matrix with enticing nutritional and mechanical attributes, thereby emerging as an ideal candidate for developing novel bakeries with improved properties. Higher hydration levels enhanced the moisture retention ability and antioxidant activity. Furthermore, FTIR studies confirmed hydration-mediated molecular interactions, thereby affecting gluten structure and the process of starch gelatinization. Stress relaxation studies have revealed the superior mechanical strength of SB80, thus demonstrating improved texture and mouthfeel attributes. Electrical impedance spectroscopy studies further displayed hydration-driven modifications in water distribution and starch arrangement. These findings open a new dimension in utilizing SCOBY as an alternative in formulating novel SDBs to create sustainable, functional food products.

The current investigation focuses on the effect of different concentrations of green coffee bean powder (GCBp) on the physicochemical, microbiological, and sensory characteristics of whole wheat bread (WWB). C1 bread formulation (containing 1% GCBp) exhibited the highest loaf volume, suggesting optimal fermentation. Moisture analysis revealed minor alterations in the moisture retention attributes of the bread formulations. Impedance analysis suggested that C1 exhibited the highest impedance with a high degree of material homogeneity. Swelling studies suggested similar swelling properties, except C5 (containing 5% GCBp), which showed the lowest swelling percentage. Furthermore, color and microcolor analysis revealed the highest L* and WI in C1. Conversely, higher concentrations of GCBp reduced the color attributes in other GCBp-containing formulations. FTIR study demonstrated an improved intermolecular interaction in C1 and C2 (containing 2% GCBp) among all. No significant variation in the overall textural parameters was observed in GCBp-introduced formulations, except C2, which showed an improved gumminess. Moreover, the TPC (total phenolic content) and microbial analysis revealed enhanced antioxidant and antimicrobial properties in GCBp-incorporated formulations compared to Control (C0, without GCBp). The sensory evaluation showed an enhanced appearance and aroma in C1 compared to others. In short, C1 showed better physicochemical, biological, and sensory properties than the other formulations.

The shelf life of whole wheat bread (WWB) significantly impacts its freshness and overall quality. This research investigated the impact of chitosan lactate (CL) on various characteristics influencing the shelf life of WWB, including its physical, chemical, textural, antimicrobial, and sensory attributes. These characteristics were evaluated by conducting various experiments such as physical inspection, moisture, impedance, swelling, color, texture, FTIR, microbiological, and sensory analysis. CL with different concentrations was incorporated into WWB formulations: P0.0 (0.0% w/w CL, control), P0.5 (0.5% w/w CL), P1.0 (1.0% w/w CL), P2.0 (2.0% w/w CL), and P3.0 (3.0% w/w CL). The inclusion of CL promoted the Maillard reaction (MR) compared to P0.0. The promotion of MR resulted in the formation of a shinier crust, which increased as the CL content was increased. P0.5 comprised large-sized pores and exhibited increased loaf height. CL-containing WWB formulations showed an increased moisture content and decreased impedance values compared to the control. FTIR analysis of P0.5 demonstrated the enhanced interaction and bonding of water molecules. P0.5 demonstrated optimal textural, colorimetric, and antimicrobial properties compared to other formulations. The sensory attributes of WWBs remain unchanged despite CL addition. In conclusion, P0.5 exhibited optimal characteristics associated with better quality and prolonged shelf life.

Oleogels, which are traditionally utilized to reduce saturated and trans fats in bakery foods, have recently shown promising applications in non-bakery foods, particularly in the enhancement of their food texture and cooking qualities. This study investigates the impact of incorporating stearic acid-containing candelilla wax–groundnut oil oleogel in various proportions on the production of whole wheat pasta. Five different pasta samples were prepared by replacing water with oleogels in varying concentrations (2.5%, 5%, 10%, and 15%), and their physicochemical attributes were evaluated using a range of analytical methods for both cooked and uncooked pasta (like microscopy, colorimetry, dimensional analysis, texture, cooking qualities, moisture content, and FTIR). Significant differences in width, thickness, and color properties were observed between the control sample (0% oleogel) and those containing oleogel, with notable variations in surface texture and color intensities, particularly with the higher oleogel content (p < 0.05). Cooked pasta exhibited lower L* values and higher a* values than uncooked pasta. Stereo zoom microscope and field emission scanning electron microscope (FESEM) micrographs demonstrated a change in the pasta surface topology and microstructures. Dark spots on the pasta with greater oleogel concentrations (samples with 10% and 15% oleogel replacement) suggest the formation of starch–lipid complexes. Cooking induced pore formation, which was more pronounced when the oleogel content was increased, impacted the water absorption capacity, swelling index, and moisture content. The cooked samples exhibited higher moisture content and improved polymer network stability compared to the uncooked ones, indicating the potential of oleogel incorporation to modulate pasta properties in a concentration-dependent manner. These findings underscore the versatility of oleogels when their applications are diversified in non-bakery foods to enhance food texture and quality.

This study investigated the effects of incorporating stearic acid (SAC) in candelilla wax (CW) and groundnut oil (GO) oleogel with potential health benefits as an alternative to saturated fats in processed foods. Results showed that SAC possesses crystal habit-modifying properties on the oleogels, causing its average crystallite size to increase, as observed through polarized light microscopy and XRD analysis. Additionally, SAC caused an increase in ordering within the crystallite network as a result of the decrease in d-spacing. Interestingly, the firmness of the oleogels remained unaffected, even at a higher fraction of SAC. It is believed to be due to the interference caused by the crystallization of high-melting SAC within the fine crystal network of CW-GO oleogel. However, adding 3 mg of SAC significantly increased the work of the shear of the oleogel (SAC3), which decreased the spreadability. As observed through colorimetric analysis, SAC3 showed a dense and uniform distribution of prominent bright crystals with minimal amorphous regions, leading to a high whiteness index. SAC3 also demonstrated the highest compactness and dislocation density among the oleogels, likely due to the formation of prominent crystals. However, SAC did not affect the overall oleogel crystallization rate. SAC3 had delayed secondary crystallization and thermal equilibrium by having a prolonged crystallization time of CW crystals. In the case of controlled delivery studies, the addition of SAC improved CPCR. On the other hand, CPCR decreased with the increase in SAC amount, where SAC3 showed a moderate curcumin release ability among the oleogels.

Emerging natural-based polymers and materials progress and new technology innovations open the way for unique food products with high nutritional value development. In this regard, oleogel may be essential in replacing fatty acids from food products. In this study, we researched the effects of varied soy lecithin (SYL) concentrations on the various physicochemical characteristics of soy wax (SW)/refined soybean oil (RSO) oleogels. These oleogels had a soft texture. The microscopic analysis of the oleogels suggested that the thickness, length, and density of the wax crystals (needle-shaped) varied as the SYL content was changed. Colorimetric analysis indicated that the oleogels were slightly yellowish. FTIR spectrometry helped analyze the functional groups of the raw materials and the oleogels. All the functional groups present in the raw materials could be accounted for within the oleogels. The only exception is the hydrogen-bonding peak in SW, which was not seen in the FTIR spectrum of the oleogels. It was found that at a critical SYL content, the oleogel showed a stable and repeatable wax network structure. This can be described by the presence of the uniformly distributed fat crystal network in the sample. The DSC analysis revealed that the oleogel samples were thermo-reversible, with their melting and crystallization temperatures ~43 °C and ~22 °C, respectively. In gist, it can be concluded that the incorporation of SYL can impact the color, wax crystal network characteristics, thermal characteristics, and mechanical characteristics of the oleogels in a composition-dependent manner.

The current study deciphers the processing of different proportions of white flour and whole wheat flour (100:0, 75:25, 50:50: 25:75, and 0:100) into a pizza base using yeast-based fermentation. The bread making using the yeast system resulted in significant changes in the characteristics of bread, ranging from the porous structure development to the crumb cellular structure modifications. An increase in the proportions of whole wheat flour resulted in the formation of golden yellow pizza bases. The lightness of the crust was decreased, whereas the yellowness index was increased as the whole wheat flour contents were increased. The pore size of the pizza base was decreased while the pore density was increased as the whole wheat flour content was raised within the bread. The microscopic study also showed the formation of porous structures on the bulk of the pizza base. The texture analysis of the bread also suggested an increase in the formation of the rigid network structure when the amount of whole wheat flour was increased. The springiness, cohesiveness, and resilience were comparable for all the prepared samples. On the other hand, the values for hardness, gumminess, and chewiness showed an increasing trend with the increase in the whole wheat flour content. The impedance of the samples decreased when there was an increase in the whole wheat flour content. Overall, the pizza base that was developed with 50% whole wheat flour and 50% white flour ratio displayed acceptably firm yet sufficient viscoelastic properties for human consumption.

Candelilla wax (CW) is a well-known oleogelator that displays tremendous oil-structuring potential. Lecithin acts as a crystal modifier due to its potential to alter the shape and size of the fat crystals by interacting with the wax molecules. The proposed work is an attempt to understand the impact of differently sourced lecithin, such as sunflower lecithin (SFL) and soya lecithin (SYL), on the various physicochemical properties of CW and rice bran oil (RBO) oleogels. The yellowish-white appearance of all samples and other effects of lecithin on the appearance of oleogels were initially quantified by using CIELab color parameters. The microstructural visualization confirmed grainy and globular fat structures of varied size, density, packing, and brightness. Samples made by using 5 mg of SFL (Sf5) and 1 mg of SYL (Sy1) in 20 g showed bright micrographs consisting of fat structures with better packing that might have been due to the improvised crystallinity in the said samples. The FTIR spectra of the prepared samples displayed no significant differences in the molecular interactions among the samples. Additionally, the slow crystallization kinetics of Sf5 and Sy1 correlated with better crystal packing and fewer crystal defects. The DSC endotherm displayed two peaks for melting corresponding to the melting of different molecular components of CW. However, all the formulations showed a characteristic crystallization peak at ~40 °C. The structural reorganization and crystal growth due to the addition of lecithin affected its mechanical property significantly. The spreadability test among all prepared oleogels showed better spreadable properties for Sf5 and Sy1 oleogel. The inclusion of lecithin in oleogels has demonstrated an enhancement in oleogel properties that allows them to be included in various food products.

There is a significant increase in the geriatric population across the globe. With the increase in the number of geriatric people and their associated health issues, the need for larger healthcare resources is inevitable. Because of this, healthcare service-providing industries are facing a severe challenge. However, technological advancement in recent years has enabled researchers to develop intelligent devices to deal with the scarcity of healthcare resources. In this regard, the Internet of things (IoT) technology has been a boon for healthcare services industries. It not only allows the monitoring of the health parameters of geriatric patients from a remote location but also lets them live an independent life in a cost-efficient way. The current paper provides up-to-date comprehensive knowledge of IoT-based technologies for geriatric healthcare applications. The study also discusses the current trends, issues, challenges, and future scope of research in the area of geriatric healthcare using IoT technology. Information provided in this paper will be helpful to develop futuristic solutions and provide efficient cost-effective healthcare services to the needy.