XJXianyuan Jiang

Xianyuan Jiang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xianyuan Jiang has a total of 233 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Coordination‐Volatilization‐Induced (001) Out‐of‐Plane Reorientation by Ethylamine Hydrochloride for Efficient and Stable Inverted Perovskite Solar Cells

    by Liujiang Zhang, Xianyuan Jiang, Yiran Yan, Meirong Fu, Ziheng Zhang, Jihao Zhang, Chenyue Wang, Zhenhuang Su, Bingchen He, Qihang Sun, et al.

    Inverted perovskite solar cells (PSCs) offer compelling advantages in efficiency and stability. Nevertheless, the complex crystallization dynamics inherent to solution processing often result in disordered crystallographic orientations and defect accumulation. Vertically aligned grains with a preferential (001) out‐of‐plane orientation can enhance charge carrier transport and suppress nonradiative recombination. We introduce ethylamine hydrochloride (EACl) into the precursor solution. Owing to its moderate ionic size, favorable adsorption energy, and appropriate volatility, EACl first strongly coordinates with the lead‐iodide framework during film formation, promoting advanced nucleation followed by retarded crystal growth. This facilitates the formation of the α‐phase while suppressing the δ‐phase. Subsequently, the volatilization of EACl during annealing gradually induces a crystallographic reorientation of the grains, yielding a (001) predominantly preferential out‐of‐plane orientation degree of 89.89% and an average grain size of 1.17 µm. Leveraging this EACl‐based coordination–volatilization regulation strategy, the resulting PSCs achieve a power conversion efficiency of up to 26.68%. Moreover, both unencapsulated and encapsulated devices retain >90% of their initial performance after 1200 h aging at 65°C in N 2 and 1100 h continuous maximum power point tracking. This work provides new insights into the critical role of EA + in governing the crystallization kinetics and crystallographic orientation of perovskites.

  • Open Access

    Synergistic Additive and Bulky Cation Engineering via a Sequential Vacuum Dry‐Dipping Process for Tin Perovskite Solar Cells

    by Chun‐Hsiao Kuan, Xianyuan Jiang, Yun‐Sheng Shih, Chien‐Ling Ting, Po‐Kai Kang, Yue Lu, Sung‐Fu Hung, Hsin‐Lung Chen, Shiang Lan, Guan‐Ruei Chen, et al.

    Scalable fabrication of tin‐based perovskite solar cells (TPSCs) remains challenging due to rapid crystallization, poor film uniformity, and instability of Sn 2+ . Herein, we report a spin‐coating‐free approach, combining blade coating, vacuum‐drying, and controlled dipping methods, to achieve highly crystalline and uniform tin perovskite films. Through systematic studies, we reveal the universal role of SnI 2 in governing crystallization kinetics, where pre‐formed crystalline SnI 2 hinders cation diffusion, while amorphous SnI 2 promotes homogeneous film growth. Additive engineering with guanidinium iodide (GAI), SnF 2 , and trimethylene sulfoxide (TMSO) improved crystallinity, suppressed Sn 2 + oxidation, and extended carrier lifetimes. Moreover, we introduce n‐butylammonium tosylate (BATo) as a dual‐functional bulky cation, whose BA + group enhances lattice ordering while the tosylate (TsO − ) group passivates buried interfaces. Compared with conventional blade‐coating and spin‐coating methods, the dipping process facilitates the penetration of large molecules into the film and further enables lattice reconstruction. Devices incorporating BATo achieved a power conversion efficiency (PCE) of 10.2%, retained >90% efficiency under continuous operation, and maintained >80% after 2500 h of shelf storage. This work clarifies the intrinsic role of SnI 2 and provides a scalable pathway toward efficient, stable, and lead‐free perovskite photovoltaics.

  • Open Access

    Energy‐Level Engineering with Co‐Sensitization of Organic Molecules on NiO x for Sn‐Based Perovskite Solar Cells

    by Ezhumalai Yamuna, Parameswaran Rajamanickam, Kai‐Wei Yu, Yun‐Sheng Shih, Yu Qi Li, Wen‐Yu Chen, Shaohuan Hong, Cheng‐Liang Liu, Xianyuan Jiang, Ming‐Chou Chen, et al.

    A cooperative self‐assembly of organic small molecules made of diester/diacid‐bithiophene units [BT 2D ‐CE ( 1 ), BT 2D ‐CA ( 2 )] with hexylpyridine‐ or phosphonic acid‐functionalized dithienopyrrole units [DTP 2D ‐Py ( 3 ), DTP 2D ‐PA ( 4 )] was induced atop Nickel Oxide (NiO x ) hole‐transport‐layer for lead‐free tin‐based perovskite solar cells. The pyridine functionality of DTP 2D ‐Py ( 3 ) in conjunction with the carboxyl group of BT 2D ‐CA ( 2 ) altered the NiO x /Perovskite interfacial energetics and accelerates selective hole extraction by passivating the buried interfacial defects, resulting in a power conversion efficiency of 8.1% due to enhanced photovoltage (0.560 to 0.593 V), alongside remarkable operational stability. The crucial role of synergistic energy‐level modulation, especially the Fermi level, was unraveled using ultraviolet photoelectron spectroscopy, demonstrating that combining complementary conjugated organic backbones with targeted functionalities offers versatility for enhancement of overall device performance and stability.


  • Dipolar-Steric Cage Diammonium Passivation for Perovskite/Tunnel Oxide Passivated Contact Tandem Solar Cells

    by Junxiao He, Bowen Yang, Wenhao Li, Anqi Lv, Shibo Wang, Zijia Li, Weichun Pan, Xianyuan Jiang, Bo Gao, Liu Yang, et al.

    Resolving the long-standing trade-off between effective interfacial passivation and efficient charge transport remains a central challenge for perovskite/silicon tandem solar cells, particularly at the perovskite/C60 interface. Here, inspired by the bio-isostere concept, we introduce a dipolar cage strategy that replaces traditional planar phenyl motifs with a rigid bicyclo[2.2.2]octane (BCO) scaffold. Distinct from conventional passivators relying solely on steric shielding, the BCO framework imparts a substantial intrinsic molecular dipole. This architecture establishes a favorable interfacial electrostatic field, substantially reducing the interfacial energetic mismatch for electron extraction while effectively suppressing nonradiative recombination. Utilizing bicyclo[2.2.2]octane-1,4-diammonium diiodide (BCODAI), monolithic perovskite/tunnel oxide passivated contact (TOPCon) tandem solar cells achieve a certified champion efficiency of 32.54%. Crucially, the devices exhibit outstanding operational stability, retaining over 80% of their initial efficiency after 1100 h of continuous operation. This dipolar-steric cage design provides an effective interfacial engineering principle for high-performance tandem photovoltaics.

  • Nd 3+ -doped MAPbBr 3 perovskite single crystals for high-performance ultraviolet photodetectors

    by Shuyi Zhang, Dong Liu, Luzong Jing, Xianyuan Jiang, Guanwen Chen, Longfei Xu, Hao Wang, Jiechao Wang, Ran Kang, Zhongchen Wu, et al.

    Uniform Nd 3+ incorporation into the MAPbBr 3 lattice improves crystal quality and stability, yielding a UV detector with lower dark current and excellent photocurrent response at various UV intensities.

  • Dynamic Molecular Conformational Isomerization-Driven Halide Exchange of Perovskite Enabling Ultrastable and Low-Threshold Violet-Blue Lasing

    by Hao Wang, Siyu Dong, Xianyuan Jiang, Mingyu Ma, Xin Wen, Haobo Wu, Qian Li, Fengxian Zhou, Jiayun Sun, Chang Liu, et al.

    Halide perovskite is rising as a promising candidate for lasing applications owing to its excellent luminescence properties and the facile, economical construction of a microcavity. However, developing violet-blue perovskite lasers, which typically rely on bromide–chloride mixed halide systems, has long been hindered by uncontrollable crystallization and high defect density caused by poor crystal quality. Here, we develop an isomerization-driven halide exchange strategy for the growth of chloride mixed wide-band gap perovskite, which is fundamentally distinct from the violent, unregulated processes of traditional methods. This mild and kinetically controlled reaction enables the formation of uniform, highly crystallized violet-blue perovskite films with drastically reduced defect density and suppressed nonradiative recombination. As a result, an ultralow amplified spontaneous emission threshold of 1.4 μJ cm–2 is achieved at 423 nm, which is 5.1 times lower than the best previously reported value. More importantly, a random and single-mode laser threshold of 2.6 and 6.5 μJ cm–2 at 423 nm is achieved. The robust and homogeneous structure enables exceptional operational stability, with a T95 lifetime exceeding 7 × 107 pulses under intense excitation (25× threshold) in ambient conditions without encapsulation. This work establishes a generalizable, universal paradigm for synthesizing high-quality wide-band gap perovskites, which provides a versatile and robust method for the development of advanced violet-blue optoelectronic devices.

  • Tryptamine Terminated Low‐Dimensional Interfaces Enabled High Performance Perovskite/Silicon Tandem Solar Cells

    by Hao Liang, Wenjing Wang, Xianyuan Jiang, Xin Wen, Hang Yu, Ye Ding, Mingyu Ma, Wenzhuo Li, Gaoqi Liu, Haobo Wu, et al.

    The construction of a high‐quality interface with excellent surface passivation and carrier transport is critical to the device performance of solar cells. Low‐dimensional perovskite structures are widely explored for surface passivation due to their effective suppression of interfacial defects and enhanced environmental stability. While terminal molecules for constructing low‐dimensional structures provide excellent passivation, they can introduce potential barriers for charge transport if the energy levels are not well‐aligned. Herein, a tryptamine molecule is explored as the terminal molecule for the construction of a low‐dimensional structure for passivating the buried interface of perovskite solar cells. Based on the inclusion of nitrogen atoms in the aromatic heterocyclic structure, the terminal molecule shows an uplifted HOMO level that aligns well with the perovskite skeleton, giving rise to enhanced orbit coupling. Therefore, this low‐dimensional structure enables excellent surface passivation and interfacial carrier transport simultaneously, generating an outstanding open‐circuit voltage ( V OC ) up to 1.266 V and an efficiency of 23.53% for single‐junction wide‐bandgap (1.68 eV) perovskite solar cells. This improvement enables the fabrication of the perovskite/silicon tandem solar cell with an efficiency of 33.22% (32.88% assessed by a third party) and a V OC of 1.987 V. Moreover, the fast carrier transport at the interface suppressed the halide phase segregation, bringing much enhanced operation stability.


  • Top Cited Papers

    Additive-assisted perovskite crystallization on industrial TOPCon silicon for tandem solar cells with improved efficiency

    by Qilin Zhou, Renjun Guo, Shunchang Liu, Nengxu Li, Menglei Xu, Xinyu Zhang, Xianyuan Jiang, Lu Wang, Laura-Isabelle Dion-Bertrand, Zhuojie Shi, et al.


  • Open Access

    Tailored Supramolecular Interface Enables Efficient and Stable Tin Halide Perovskite Photovoltaics

    by Miao Zeng, Zhongliang Yan, Xinyu Ye, Yu Lou, Tao Sheng, Xianyuan Jiang, Yulin Mao, Arui Huang, Xueying Yang, Zhaojin Wang, et al.


  • Open Access

    Bithiophene Imide-Based Self-Assembled Monolayers (SAMs) on NiOx for High-Performance Tin Perovskite Solar Cells Fabricated Using a Two-Step Approach

    by Arulmozhi Velusamy, Chun-Hsiao Kuan, Tsung-Chun Lin, Yun-Sheng Shih, Cheng-Liang Liu, De-You Zeng, Yu-Gi Li, Yu-Hao Wang, Xianyuan Jiang, Ming-Chou Chen, et al.

    Three new bithiophene imide (BTI)-based organic small molecules, BTI-MN-b4 (1), BTI-MN-b8 (2), and BTI-MN-b16 (3), with varied alkyl side chains, were developed and employed as self-assembled monolayers (SAMs) applied to NiOx films in tin perovskite solar cells (TPSCs). The NiOx layer has the effect of modifying the hydrophilicity and the surface roughness of ITO for SAM to uniformly deposit on it. The side chains of the SAM molecules play a vital role in the formation of a high-quality perovskite layer in TPSCs. The single crystal structure of BTI-MN-b8 (2) was successfully obtained, indicating that a uniform SAM can be formed on the NiOx/ITO substrate with an appropriate size of the alkyl side chain. By combining BTI-MN-b8 (2) with NiOx, a maximum PCE of 8.6% was achieved. The TPSC devices utilizing the NiOx/BTI-MN-b8 configuration demonstrated outstanding long-term stability, retaining ∼80% of their initial efficiency after 3600 h. Comprehensive characterizations, including thermal, optical, electrochemical, and morphological analyses, alongside photovoltaic evaluation, were carried out thoroughly. This study presents a pioneering strategy for improving TPSC performance, highlighting the efficacy of combining organic SAMs with NiOx as the HTM and offering a promising pathway for future advances in TPSC technology using a two-step fabrication approach.