Stephen James Turrell
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Stephen James Turrell has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Mauro Pasta
Department of Materials, University of Oxford
5 shared publications - Ben Jagger
Department of Materials, University of Oxford
3 shared publications - Marco Siniscalchi
Department of Materials, University of Oxford, Oxford OX1 3PH, U.K.
2 shared publications - Susannah C. Speller
Department of Materials, University of Oxford, Parks Road, Oxford OX1 3PH, United Kingdom
2 shared publications - Yi Liang
University of Oxford
2 shared publications - Ceren Zor
About:Energy Ltd
1 shared publication
Latest Publications
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (3) , 215
Pore-Free Thin-Film Lithium Argyrodite Solid Electrolytes Fabricated by RF Magnetron Sputtering
Lithium argyrodites based on the composition Li6PS5X (X = Cl, Br, I) are among the most intensely researched solid electrolyte materials. To enable application in commercial all-solid-state lithium metal batteries, separators must be fabricated with large areas and a thin (6PS5Cl is challenging.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (3) , 215
Pore-Free Thin-Film Lithium Argyrodite Solid Electrolytes Fabricated by RF Magnetron Sputtering
Lithium argyrodites based on the composition Li6PS5X (X = Cl, Br, I) are among the most intensely researched solid electrolyte materials. To enable application in commercial all-solid-state lithium metal batteries, separators must be fabricated with large areas and a thin (6PS5Cl is challenging.
- Open Access
- 25 April 2025
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 37 (9) , 3504-3518
Origin of Stability in the Solid Electrolyte Interphase formed between Lithium and Lithium Phosphorus Oxynitride
- 25 April 2025
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 37 (9) , 3504-3518
Open AccessOrigin of Stability in the Solid Electrolyte Interphase formed between Lithium and Lithium Phosphorus Oxynitride
- Open Access
- 17 January 2025
- Published by American Chemical Society (ACS) in ChemRxiv
On the origin of stability in the Li-LiPON solid electrolyte interphase
Lithium phosphorus oxynitride (LiPON) is one of the few solid electrolytes that forms a truly passivating solid electrolyte interphase (SEI) when in contact with metallic lithium. Investigations into the origin of this stability may provide the insights needed to replicate it in the SEIs of alternative solid electrolyte materials. In this study we used in situ lithium plating X-ray photoelectron spectroscopy (XPS) to investigate the formation and evolution of the Li-LiPON SEI for the first time. We show that the SEI is chemically and structurally inhomogeneous, with the fully reduced compounds identified in previous studies (Li2O, Li3N and Li3P) concentrated near the lithium metal side and partially lithiated species, including Lix P, predominant closer to the LiPON side. Li3P and Lix P have recently been suggested as enablers of continuous SEI growth in thiophosphate solid electrolytes. We suggest that the stability of the Li-LiPON SEI is derived from a combination of the LiPON reduction potential (0.68 V vs. Li+/Li), which is below the oxidation potentials of the fully reduced SEI compounds, and the graded structure of the SEI, which ensures that the most reduced species are not in physical or electrical contact with the LiPON layer.
- 17 January 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessOn the origin of stability in the Li-LiPON solid electrolyte interphase
Lithium phosphorus oxynitride (LiPON) is one of the few solid electrolytes that forms a truly passivating solid electrolyte interphase (SEI) when in contact with metallic lithium. Investigations into the origin of this stability may provide the insights needed to replicate it in the SEIs of alternative solid electrolyte materials. In this study we used in situ lithium plating X-ray photoelectron spectroscopy (XPS) to investigate the formation and evolution of the Li-LiPON SEI for the first time. We show that the SEI is chemically and structurally inhomogeneous, with the fully reduced compounds identified in previous studies (Li2O, Li3N and Li3P) concentrated near the lithium metal side and partially lithiated species, including Lix P, predominant closer to the LiPON side. Li3P and Lix P have recently been suggested as enablers of continuous SEI growth in thiophosphate solid electrolytes. We suggest that the stability of the Li-LiPON SEI is derived from a combination of the LiPON reduction potential (0.68 V vs. Li+/Li), which is below the oxidation potentials of the fully reduced SEI compounds, and the graded structure of the SEI, which ensures that the most reduced species are not in physical or electrical contact with the LiPON layer.
- Open Access
- 18 April 2023
- Published by Wiley in Advanced Energy and Sustainability Research
- Vol. 5 (8)
Lithium Plating and Stripping: Toward Anode‐Free Solid‐State Batteries
Li‐ion batteries (LIBs) have been widely used in portable electronic devices, the transportation sector, and grid storage. However, LIB anodes are restricted to carbon‐based materials limiting their energy density. Recently, the use of metallic Li as the anode in Li‐metal (LMBs) and solid‐state (LMSSBs) batteries has gained attention due to the high energy densities it can provide. Herein, the research progress in the field to derive a broad picture of the technologies relying on Li metal as the anode is critically assessed. It is essential to understand the Li plating and stripping processes in terms of fundamental electrochemical and physical mechanisms to address the challenges of employing metallic Li. Anode‐free Li‐metal batteries (AFLMBs) and anode‐free solid‐state batteries (AFSSBs) are the most attractive systems discussed in this review. AFLMBs are highly studied, but safety concerns due to Li dendrite growth and side reactions between plated Li metal and liquid electrolyte are some key challenges yet to be resolved. AFSSBs are the ultimate goal in this field, as utilizing a solid‐state electrolyte (SSE) can prevent dendrites at moderate charging rates and realize the potential of the anode‐free battery. However, the general problems with the use of SSEs remain and require substantial research efforts.
- 18 April 2023
- Published by Wiley in Advanced Energy and Sustainability Research
- Vol. 5 (8)
Open AccessLithium Plating and Stripping: Toward Anode‐Free Solid‐State Batteries
Li‐ion batteries (LIBs) have been widely used in portable electronic devices, the transportation sector, and grid storage. However, LIB anodes are restricted to carbon‐based materials limiting their energy density. Recently, the use of metallic Li as the anode in Li‐metal (LMBs) and solid‐state (LMSSBs) batteries has gained attention due to the high energy densities it can provide. Herein, the research progress in the field to derive a broad picture of the technologies relying on Li metal as the anode is critically assessed. It is essential to understand the Li plating and stripping processes in terms of fundamental electrochemical and physical mechanisms to address the challenges of employing metallic Li. Anode‐free Li‐metal batteries (AFLMBs) and anode‐free solid‐state batteries (AFSSBs) are the most attractive systems discussed in this review. AFLMBs are highly studied, but safety concerns due to Li dendrite growth and side reactions between plated Li metal and liquid electrolyte are some key challenges yet to be resolved. AFSSBs are the ultimate goal in this field, as utilizing a solid‐state electrolyte (SSE) can prevent dendrites at moderate charging rates and realize the potential of the anode‐free battery. However, the general problems with the use of SSEs remain and require substantial research efforts.
- Open Access
- 31 October 2022
- Published by Royal Society of Chemistry (RSC) in Materials Advances
- Vol. 3 (24) , 8995-9008
Fabrication of thin solid electrolytes containing a small volume of an Li 3 OCl-type antiperovskite phase by RF magnetron sputtering
RF magnetron sputter deposition was performed using an Li 2 O + LiCl powder target. The resulting solid electrolyte films were found to contain a small volume fraction of an Li 3 OCl-type antiperovskite phase.
- 31 October 2022
- Published by Royal Society of Chemistry (RSC) in Materials Advances
- Vol. 3 (24) , 8995-9008
Open AccessFabrication of thin solid electrolytes containing a small volume of an Li 3 OCl-type antiperovskite phase by RF magnetron sputtering
RF magnetron sputter deposition was performed using an Li 2 O + LiCl powder target. The resulting solid electrolyte films were found to contain a small volume fraction of an Li 3 OCl-type antiperovskite phase.
- Open Access
- 27 September 2022
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 7 (10) , 3593-3599
On the Relative Importance of Li Bulk Diffusivity and Interface Morphology in Determining the Stripped Capacity of Metallic Anodes in Solid-State Batteries
Lithium metal self-diffusion is too slow to sustain large current densities at the interface with a solid electrolyte, and the resulting formation of voids on stripping is a major limiting factor for the power density of solid-state cells. The enhanced morphological stability of some lithium alloy electrodes has prompted questions on the role of lithium diffusivity in these materials. Here, the lithium diffusivity in Li-Mg alloys is investigated by an isotope tracer method, revealing that the presence of magnesium slows down the diffusion of lithium. For large stripping currents the delithiation process is diffusion-limited, hence a lithium metal electrode yields a larger capacity than a Li-Mg electrode. However, at lower currents we explain the apparent contradiction that more lithium can be extracted from Li-Mg electrodes by showing that the alloy can maintain a more geometrically stable diffusion path to the solid electrolyte surface so that the effective lithium diffusivity is improved.
- 27 September 2022
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 7 (10) , 3593-3599
Open AccessOn the Relative Importance of Li Bulk Diffusivity and Interface Morphology in Determining the Stripped Capacity of Metallic Anodes in Solid-State Batteries
Lithium metal self-diffusion is too slow to sustain large current densities at the interface with a solid electrolyte, and the resulting formation of voids on stripping is a major limiting factor for the power density of solid-state cells. The enhanced morphological stability of some lithium alloy electrodes has prompted questions on the role of lithium diffusivity in these materials. Here, the lithium diffusivity in Li-Mg alloys is investigated by an isotope tracer method, revealing that the presence of magnesium slows down the diffusion of lithium. For large stripping currents the delithiation process is diffusion-limited, hence a lithium metal electrode yields a larger capacity than a Li-Mg electrode. However, at lower currents we explain the apparent contradiction that more lithium can be extracted from Li-Mg electrodes by showing that the alloy can maintain a more geometrically stable diffusion path to the solid electrolyte surface so that the effective lithium diffusivity is improved.
- 1 October 2021
- Published by Elsevier in Thin Solid Films
- Vol. 735
Optimization of a potential manufacturing process for thin-film LiCoO2 cathodes
- 1 October 2021
- Published by Elsevier in Thin Solid Films
- Vol. 735
Optimization of a potential manufacturing process for thin-film LiCoO2 cathodes