AUAlexandr Usachov

Alexandr Usachov

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Alexandr Usachov has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Numerical Simulation of Heat Transfer Enhancement in the Paths of Propulsion Systems with Single-Row Spherical and Oval Dimples on the Wall

    by Sergey Isaev, Dmitry Nikushchenko, Alexandr Sudakov, Nikita Tryaskin, Leonid Iunakov, Alexandr Usachov, Valery Kharchenko

    Modeling the vortex intensification of turbulent heat transfer in narrow engine ducts using single-row dimples was carried out within the framework of multi-block computing technologies implemented in a special VP2/3 package. The cases of a rectangular section with the placement of vortex generators—single-row packages of oval and spherical dimples on the initial hydrodynamic section and the section of the stabilized flow are excluded. The connection between the generated vortex structures and the predominant increase in heat transfer compared to the increase in hydraulic losses for various dimple layouts has been established: zigzag, ladder, and centers shifted and in a longitudinal-transverse order. The superiority in heat removal from the thickness with inclined oval dimples is shown—1.23 times compared to spherical ones with a decay in hydraulic resistance by 1.16 times.


  • Open Access

    Numerical Simulation of a Periodic Quasi-Switching Mode of Flow around a Conical Dimple with a Slope Angle of 10 Degrees on the Wall of a Narrow Channel Using URANS

    by Sergey Isaev, Dmitry Nikushchenko, Alexandr Sudakov, Nikita Tryaskin, Ann Egorova, Leonid Iunakov, Alexandr Usachov, Valery Kharchenko

    The applicability of the solution of the unsteady Reynolds-averaged Navier–Stokes equations (URANS) for the numerical simulation of the periodic quasi-switching regime of vortex generation and heat transfer in a deep conical dimple with a slope angle of 10∘ on the wall of a narrow channel is substantiated. To calculate the turbulent regime, the model of shear stress transfer by Menter 2003, modified taking into account the influence of the curvature of streamlines within the framework of the Rodi-Leshziner-Isaev approach, is used. At Reynolds number Re=104, the oscillation period of the transverse Rz and longitudinal forces Rx, as well as the total heat transfer Numm to the control section of the heated channel wall with a dimple, is set equal to 60, which corresponds to the Strouhal number St=0.0167. Computer visualization of swirling jet-vortex flows demonstrates focus-type sources on the side faces of the dimple. In the self-oscillating mode, a two-cell vortex system is formed with different intensities at the oscillation period Rz. Periodic changes in friction, Nusselt numbers and temperature are recorded in the longitudinal and transverse median sections of the dimple and reflect the oscillations of the vortex structure from left to right and from right to left. The formation of a fan jet is shown, which oscillates relative to the plane of longitudinal symmetry, causing a redistribution of power and thermal loads.


  • Open Access

    Standard and Modified SST Models with the Consideration of the Streamline Curvature for Separated Flow Calculation in a Narrow Channel with a Conical Dimple on the Heated Wall

    by Sergey Isaev, Dmitry Nikushchenko, Alexandr Sudakov, Nikita Tryaskin, Ann Egorova, Leonid Iunakov, Alexandr Usachov, Valery Kharchenko

    The testing of the standard and modified SST models of the transfer of shear stresses was carried out on an example of calculating the heat transfer with an intense detached flow around a conical dimple with a slope angle of 45° on the heated wall of a narrow channel. It was shown that the standard turbulence model by Menter SST (MSST) of 2003, widely used in the packages Fluent, CFX, StarCCM+, etc., significantly underestimated the intensity of the return flow. A correction of this model was presented that took into account the influence of the curvature of streamlines within the framework of the Rodi-Leshziner-Isaev (RLI) approach for spatial separated flows. It was found that the predictions for the RLI MSST 2003 were close to the predictions for the original standard MSST 1993, in which the eddy viscosity was calculated using the vorticity modulus. At the same time, the predictions based on the modified one, following Smirnov-Menter (SM) MSST 2003, included in the ANSYS model catalog did not differ too much from the standard MSST 2003. The preference of the MSST modified within the RLI 2003 for calculating the heat transfer in intense separated flows was substantiated.