JHJiayue Han

Jiayue Han

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jiayue Han has a total of 177 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • In-Sensor Visible and Mid-Infrared Dual-Band Perception and Computing

    by Chao Han, Shi Fang, Jiayue Han, Fakun Wang, Wenduo Chen, Zhenhan Zhang, Gongyuan Zhang, Ziyi Fu, Lei Guo, Yadong Jiang, et al.

    Machine vision in complex environments requires hardware that can integrate multispectral sensing with real-time front-end information processing. Visible light (VIS) and mid-infrared (MIR) signals provide complementary scene information, yet existing photodetectors cannot directly support VIS–MIR dual-band image processing at the sensor front end because their outputs are difficult to make both spectrally distinguishable and computation-compatible. Here, we report an electrically tunable lateral back-to-back dual-heterojunction device based on multilayer graphene/tungsten diselenide/black phosphorus for VIS–MIR dual-band in-sensor computing. The device exhibits electrically defined photoresponse states with spectrally distinguishable and bipolar characteristics, enabling simultaneous pattern recognition and spectral-band identification directly at the sensor level with 100% accuracy across three letter classes. It further supports dual-band in-sensor convolution in MIR-suppression and MIR-enhancement modes, allowing task-oriented modulation of MIR information while extracting VIS features. In addition, the device enables effective sensor-level suppression of VIS glare superimposed on MIR targets, improving downstream recognition accuracy from 33 to 98%. This work provides a device-level route toward task-oriented VIS–MIR information processing and efficient multispectral machine vision in complex environments.

  • Self‐Powered SWIR Photodetector Based on Se 0.2 Te 0.8 Thin‐Film Heterojunction

    by Chenghao Wang, Jiale Xu, Changyong Lan, He Yu, Jiamin Jiang, Xinrui Bai, Guangliang Qin, Xiutao Yang, Xiang Dong, Jiayue Han, et al.

    High‐performance short‐wave infrared (SWIR) photodetectors typically rely on single‐crystalline germanium and III–V semiconductors. However, their high material costs and complex fabrication requirements hinder large‐area integration and cost‐effective SWIR technologies. Here, we report a scalable vertical heterojunction employing magnetron‐sputtered Se 0.2 Te 0.8 thin films with good large‐area uniformity. By exploiting the intrinsic SWIR bandgap absorption of Se 0.2 Te 0.8 together with the built‐in electric field of the vertical heterojunction, the device exhibits a high signal‐to‐noise ratio, robust environmental stability and efficient self‐powered operation at room‐temperature across multiple telecommunication bands. Under zero bias illumination at 1550 nm, it achieves a responsivity of 32 mA/W, a specific detectivity of 5 × 10 9 Jones, and a microsecond‐scale response time. Single‐pixel scanning experiments further demonstrate its potential for SWIR optical communication and imaging. This work provides a scalable route towards high‐performance, low‐power SWIR photodetection and imaging at room temperature.

  • Recent Advances in Infrared‐to‐Visible Upconversion Photodetectors: From Multi‐Dimensional Innovations to Future Perspectives

    by Xingwei Han, Meiyu He, Feiyun Zhao, Shenghu Wei, Minwen Xiang, Yong Liu, Qiang Xu, Mengqi Yao, Zhicheng Xie, Lei Guo, et al.

    Thin‐film infrared‐to‐visible upconversion photodetectors (UCDs) have emerged as a cost‐effective, pixel‐less paradigm for infrared (IR) visualization. This review first elucidates mainstream upconversion modalities, device configurations, and the physical principles of energy conversion, followed by a systematic definition of standardized performance metrics. Subsequently, we evaluate recent innovative strategies across four synergistic dimensions. For material frontiers, we trace the evolution of all‐inorganic, organic/inorganic hybrid, and all‐organic semiconductor systems regarding fabrication methodologies and optoelectronic performance. For structural evolution, a rigorous analysis of tandem architectures is conducted, specifically contrasting tandem light‐emitting diodes (LEDs) designed for efficiency multiplication against tandem photodetectors customized for achieving ultralow turn‐on voltages ( V on ) through photogenerated potential accumulation. Regarding mechanism innovations, we highlight performance and functionality enhancements facilitated by photomultiplication, optical microstructure, and color‐tunable emission. In terms of application paradigms, an overview of UCD deployment in bioimaging, medical monitoring, and wearable electronics is provided. Finally, we propose targeted strategic paths to address persistent challenges such as spectral response constraints, absence of multi‐dimensional information, and insufficient functional integration, thereby providing a comprehensive perspective for the future roadmap of intelligent, multi‐functional integrated UCDs.

  • Broadband Photodetectors and Imaging Arrays Based on PtSe 2 /Si Heterojunctions

    by Guangze Ye, Runze Zhang, He Yu, Chenghao Wang, Jiamin Jiang, Guangliang Qin, Longcheng Que, Xiang Dong, Jiayue Han, Jun Gou, et al.

    Short‐wave infrared (SWIR) photodetectors are of great importance for applications such as optical communications. However, due to the bandgap limitation of silicon (Si) and the poor compatibility of many SWIR photoactive materials with conventional integrated‐circuit processes, the development of high‐performance, broadband SWIR photodetectors suitable for miniaturization and monolithic integration remains highly challenging. Herein, a visible‐to‐SWIR broadband photodetector based on a PtSe 2 thin‐film/Si heterojunction is proposed, and an 8 × 8 array device is further demonstrated. Centimeter‐scale PtSe 2 films with good uniformity are obtained by combining magnetron sputtering with subsequent selenization. Benefiting from a well‐engineered heterojunction band alignment, the PtSe 2 /Si unit cell exhibits a high on/off ratio up to 3.61 × 10 5 at −0.01 V with highly sensitive room‐temperature operation, including a broadband spectral response from 405 to 1550 nm, a specific detectivity of 2.58 × 10 11 Jones, and a microsecond‐level response speed. A dedicated readout circuit is further developed, enabling real‐time SWIR imaging. This work provides a scalable, CMOS‐compatible route toward room‐temperature sensitive SWIR detectors for next‐generation optoelectronic systems.

  • Thermodynamically Driven (200) Crystallographic Texturing in PbTe Films for Linear Polarization-Sensitive Photodetection

    by Lixin Liu, Jun Gou, Jiayue Han, Han Dou, Lei Guo, Hang Yu, Guangxu Mao, Zexu Wang, Silu Peng, Yanzhao Lei, et al.

    Polarization-sensitive photodetection is a key capability for next-generation infrared imaging and sensing system, yet it is commonly realized through low-dimension materials or external optical components, which limits scalability and integration. Here, we demonstrate linear polarization-sensitive photodetection enabled by crystallographic orientation engineering in PbTe films. By elevating the substrate temperature during magnetron sputtering, PbTe films undergo a transition from randomly oriented polycrystalline growth to highly (200)-textured growth on SiO2/Si substrates, driven by surface energy minimization under nonepitaxial conditions. The preferential growth of the nonpolar (200) plane introduces pronounced optical anisotropy, manifested by polarization-dependent absorption and Raman vibrational modes. PbTe-based photodetector exhibits broadband photoresponse from visible to mid-infrared, fast response speed, and linear polarization sensitivity across multiple wavelengths. Polarization-resolved mid-infrared imaging at 3.5 μm is achieved, enabling extraction of degree and angle of linear polarization. This work establishes crystallographic texturing as an effective and scalable route toward polarization-sensitive infrared photodetectors.

  • Electrically Tunable Polarization‐Responsivity in MoTe 2 /Ta 2 NiSe 5 van der Waals Heterojunctions

    by Jinling Xie, Jiayue Han, Lei Guo, Ziyi Fu, Silu Peng, Jun Gou, He Yu, Yadong Jiang, Jun Wang

    Ultra‐compact on‐chip polarization photodetectors offer unique device concepts, yet mainstream polarization ratio optimization strategies have typically compromised responsivity. This work demonstrates an optimization of polarization‐response characteristics in anisotropic van der Waals heterostructures (MoTe 2 /Ta 2 NiSe 5 ) through gate‐tunable band alignment engineering. Reveal a correlation between the on‐off state and the polarization‐responsivity relationship in photodetectors, which may enable high‐contrast polarization imaging and improved angular discrimination without the need for external polarizers or complex pixelated architectures. Capitalizing on its simple structure, robust tunability, and pronounced PR‐PAS relationship, this work demonstrates an electrically tunable polarization‐sensitive photodetection behavior, showing promising potential for polarization imaging, optical communication, and polarization‐state monitoring.

  • Open Access

    Monolithically integrated photon-mapping infrared imager

    by Xingwei Han, Jun Wang, Lei Guo, Shikun Duan, Jiayue Han, Meiyu He, Chao Han, He Yu, Jun Gou, Weida Hu

    Conventional infrared imaging systems rely heavily on external power supplies, limiting their applicability, flexibility, and portability. Here, we present a monolithically integrated photon-mapping near-infrared (780-900 nm) imager that operates in a self-driven mode, achieving a resolution of 5799 ppi and a frame rate of 18.5 kHz. The device vertically integrates multiple photovoltage-generating light-sensing units with a light-emitting unit in a cascaded configuration, enabling visible emission upon near-infrared excitation via internal carrier transfer. Its circuit-free architecture confers intrinsic flexibility and large-area scalability while remaining fully compatible with room-temperature operation. The system eliminates the need for pixel-level readout, thereby enabling spatial resolution beyond conventional pixel limits under optical excitation control. It further supports high-speed imaging governed by the transit dynamics of photogenerated carriers. In addition, its self-driven characteristic ensures inherently low background noise, enhancing the signal-to-background ratio and improving imaging quality. This work introduces a simplified, energy-efficient approach to infrared visualization.

  • Open Access

    Adaptive tunneling photodiodes enable visual recognition in high-contrast scenes

    by Lixin Liu, Fangchen Hu, Jiayue Han, Jun Gou, Peng Zou, Hang Yu, Meiyu He, Lei Guo, Yunlu Lian, Wenjie Deng, et al.

    Accurate visual sensing in extreme high-contrast lighting environments is critical for emerging intelligent systems such as autonomous vehicles, smart surveillance, and robotics. These systems rely heavily on high dynamic range (HDR) imaging to capture scenes with wide illumination variations. However, existing HDR solutions primarily depend on computational algorithms or hardware-intensive techniques such as multiexposure fusion or mechanical modulation, which suffers from latency, motion artifacts, high power consumption, and limited adaptability. Here, we present a hardware-centric approach that realizes HDR functionality directly into the photodetectors of a camera image sensor. Our design leverages an engineered tunneling mechanism to achieve bias-controllable, continuously tunable dynamic range covering up to 150 dB. In real-world high-contrast autonomous driving scenarios, this sensor-level HDR capability enables robust object classification confidence score exceeding 91% across the entire exposure scene. By shifting HDR processing to the sensor front-end, our approach substantially reduces the computational load, enabling system-level efficiency, speed, energy consumption, and recognition reliability. This prototype paves the way for the development of next-generation, compact, on-chip visual preprocessing hardware for intelligent vision systems.


  • Open Access

    Polarization Photovoltage Transistor enabling Amplified Responsivity and Sensitivity

    by Jiayue Han, Fakun Wang, Chunyu Li, Wenjie Deng, Shi Zhang, Libo Zhang, Fangchen Hu, Zhen Wang, Hongxi Zhou, He Yu, et al.

    With the rapid advancement of multi-dimensional detection, there is an urgent demand for next-generation polarization detectors capable of achieving high responsivity, fast speed, and strong polarization sensitivity, metrics that are typically limited by fundamental trade-offs. Two-dimensional (2D) materials offer a promising platform, yet their weak intrinsic anisotropy constrains polarization ratio (PR) and overall device performance. Here, we report a mid-infrared (MIR) polarization photovoltage field-effect transistor (PPFET) based on black phosphorus/molybdenum disulfide (BP/MoS2) heterostructures that combines polarization detection and amplification within a single architecture. By exploiting gate-tunable transconductance in the linear amplification region, the device achieves a PR up to 510 via a “stretching” mechanism, while maintaining a polarization angle sensitivity (PAS) up to ~46.57 mA/(W·degree) and response times down to ~0.8 μs under 3.5 μm illumination. This combination of high polarization sensitivity, responsivity, and speed establishes PPFETs as a powerful platform for high-performance MIR polarization detection and paves the way for compact, high-precision imaging systems.


  • Plasmonic-Cavity Coupling for Ultrafast Response and Broadband Detection in PbSe Midwave Infrared Photodetectors

    by Yifei Xu, Chao Chen, Zexu Wang, Yuchao Wei, Xiutao Yang, Baohua An, Laijiang Wei, Hongxi Zhou, Li Xin, Jiayue Han, et al.