Xiaozhang Zhu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xiaozhang Zhu has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
- Zhiqin Zhao
School of Electronic Science and Engineering, University of Electronic Science and Technology of China, Chengdu, Sichuan, CHINA
8 shared publications - Qing Huo Liu
Eastern Institute of Technology
4 shared publications - Shiwen Lei
University of Electronic Science and Technology of China
4 shared publications - Wei Huang
School of Electronic Science and Engineering, University of Electronic Science and Technology of China, Chengdu, Sichuan, CHINA
4 shared publications - Wei Yang
School of Electronic Science and Engineering University of Electronic Science and Technology of China Chengdu Sichuan China
4 shared publications - Haoquan Hu
School of Electronic Science and Engineering, University of Electronic Science and Technology of China, Chengdu, China
2 shared publications
Latest Publications
- Open Access
- 24 July 2026
- Published by MDPI AG in Remote Sensing
- Vol. 18 (15) , 2447
An Improved Recognition Technique for Ship Targets Based on Dual-Path Cooperative Fusion Mechanism
With the increasing complexity of the electromagnetic environment, traditional radar target recognition methods face severe challenges. High-resolution range profile (HRRP) and Radar Cross Section (RCS), as two important radar features, each has its own advantages in target recognition but also exhibits limitations. To enhance radar target recognition performance in complex scenarios such as low signal-to-noise ratio (SNR), this paper proposes a recognition method based on heterogeneous multi-modal feature fusion. The proposed method constructs a three-channel parallel encoding network, which utilizes Convolutional Long Short-Term Memory (ConvLSTM), One-Dimensional Convolutional Gated Recurrent Unit (Conv1D-GRU), and Gated Recurrent Unit (GRU) to extract deep discriminative features from raw HRRP sequences, RCS sequences, and HRRP statistical features, respectively. Furthermore, it innovatively designs a dual-path cooperative fusion mechanism, achieving explicit inter-modal correlation modeling through a cross-attention module and dynamically learning the importance of each modality through an adaptive weight fusion layer, thereby realizing deep complementarity and enhancement of multi-modal information. Experimental results demonstrate that under various signal-to-noise ratios and polarization conditions, the proposed method achieves a maximum average recognition accuracy of over 99% for 6 ship targets. Compared with the traditional three-channel fixed-weight fusion method, the recognition accuracy of the proposed method increases from 90.01% to 99.42% under co-polarization, and from 81.14% to 98.15% under cross-polarization, fully validating the effectiveness and superiority of the dual-path fusion mechanism.
- 24 July 2026
- Published by MDPI AG in Remote Sensing
- Vol. 18 (15) , 2447
Open AccessAn Improved Recognition Technique for Ship Targets Based on Dual-Path Cooperative Fusion Mechanism
With the increasing complexity of the electromagnetic environment, traditional radar target recognition methods face severe challenges. High-resolution range profile (HRRP) and Radar Cross Section (RCS), as two important radar features, each has its own advantages in target recognition but also exhibits limitations. To enhance radar target recognition performance in complex scenarios such as low signal-to-noise ratio (SNR), this paper proposes a recognition method based on heterogeneous multi-modal feature fusion. The proposed method constructs a three-channel parallel encoding network, which utilizes Convolutional Long Short-Term Memory (ConvLSTM), One-Dimensional Convolutional Gated Recurrent Unit (Conv1D-GRU), and Gated Recurrent Unit (GRU) to extract deep discriminative features from raw HRRP sequences, RCS sequences, and HRRP statistical features, respectively. Furthermore, it innovatively designs a dual-path cooperative fusion mechanism, achieving explicit inter-modal correlation modeling through a cross-attention module and dynamically learning the importance of each modality through an adaptive weight fusion layer, thereby realizing deep complementarity and enhancement of multi-modal information. Experimental results demonstrate that under various signal-to-noise ratios and polarization conditions, the proposed method achieves a maximum average recognition accuracy of over 99% for 6 ship targets. Compared with the traditional three-channel fixed-weight fusion method, the recognition accuracy of the proposed method increases from 90.01% to 99.42% under co-polarization, and from 81.14% to 98.15% under cross-polarization, fully validating the effectiveness and superiority of the dual-path fusion mechanism.
- 1 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Electromagnetics, RF and Microwaves in Medicine and Biology
- Vol. 10 (2) , 181-194
Large-Field 3-D Microwave-Induced Thermoacoustic Imaging Using Transrectal Linear-Array Combined Self-Rotating Scanning and Spatial Aperture Angle Suppression
Microwave-induced thermoacoustic imaging (MITAI) uses long-wavelength microwave excitation to achieve deeper tissue penetration and a larger illumination field than laser-based methods. Intracavitary MITAI is particularly attractive because microwave excitation can be delivered extracorporeally while reusing conventional ultrasound probes, making the three-dimensional (3-D) intracavitary MITAI conceptually simple and highly feasible. However, 3-D MITAI based on a self-rotating transrectal linear-array probe suffers from severe artifacts caused by the limited receive aperture in both the rotational and elevational directions, which can drastically degrade image quality. To address this problem, we design a 3-D MITAI framework that employs a transrectal intracavitary linear-array probe performing 360$^\circ$ self-rotation, and we propose two 3-D image reconstruction strategies: (1) a fast method based on two-dimensional (2-D) slice post-processing and direct 3-D point-cloud mapping, in which, for each rotation angle, the multi-channel radio-frequency (RF) data are independently reconstructed using 2-D delay-and-sum (DAS) combined with band-pass filtering, depth window gating, dynamic aperture control, coherence-factor (CF) weighting, ring-buffer detection, and multi-threshold gating, after which the cleaned pixels in the $r$–$z$cross-sectional plane are geometrically mapped into 3-D voxels or point clouds to achieve efficient 3-D reconstruction; and (2) a full-wavefield method that treats the multi-angle data acquired during rotation as a virtual 2-D cylindrical aperture, explicitly computes the propagation delays from each voxel in 3-D space to all virtual elements, and performs 3-D DAS beamforming to obtain a volumetric dataset with effective suppression of limited-aperture artifacts. Preliminary experimental results demonstrate that the proposed system achieves lateral resolutions of 0.924 mm and 0.979 mm and axial resolutions of 0.737 mm and 0.966 mm for the two methods, respectively. Both strategies successfully realize 360$^\circ$ 3-D imaging, and with GPU acceleration, the full-wavefield 3-D reconstruction time is reduced from 2193 s to approximately 192 s. The proposed approach provides a practical solution for transrectal 3-D MITAI and, when combined with efficient large-area microwave illumination and potentially with conventional ultrasound readout, has strong potential for multimodal intracavitary applications such as rectum and surrounding vasculature imaging, where complementary acoustic structural and electromagnetic functional information could improve diagnostic accuracy.
- 1 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Electromagnetics, RF and Microwaves in Medicine and Biology
- Vol. 10 (2) , 181-194
Large-Field 3-D Microwave-Induced Thermoacoustic Imaging Using Transrectal Linear-Array Combined Self-Rotating Scanning and Spatial Aperture Angle Suppression
Microwave-induced thermoacoustic imaging (MITAI) uses long-wavelength microwave excitation to achieve deeper tissue penetration and a larger illumination field than laser-based methods. Intracavitary MITAI is particularly attractive because microwave excitation can be delivered extracorporeally while reusing conventional ultrasound probes, making the three-dimensional (3-D) intracavitary MITAI conceptually simple and highly feasible. However, 3-D MITAI based on a self-rotating transrectal linear-array probe suffers from severe artifacts caused by the limited receive aperture in both the rotational and elevational directions, which can drastically degrade image quality. To address this problem, we design a 3-D MITAI framework that employs a transrectal intracavitary linear-array probe performing 360$^\circ$ self-rotation, and we propose two 3-D image reconstruction strategies: (1) a fast method based on two-dimensional (2-D) slice post-processing and direct 3-D point-cloud mapping, in which, for each rotation angle, the multi-channel radio-frequency (RF) data are independently reconstructed using 2-D delay-and-sum (DAS) combined with band-pass filtering, depth window gating, dynamic aperture control, coherence-factor (CF) weighting, ring-buffer detection, and multi-threshold gating, after which the cleaned pixels in the $r$–$z$cross-sectional plane are geometrically mapped into 3-D voxels or point clouds to achieve efficient 3-D reconstruction; and (2) a full-wavefield method that treats the multi-angle data acquired during rotation as a virtual 2-D cylindrical aperture, explicitly computes the propagation delays from each voxel in 3-D space to all virtual elements, and performs 3-D DAS beamforming to obtain a volumetric dataset with effective suppression of limited-aperture artifacts. Preliminary experimental results demonstrate that the proposed system achieves lateral resolutions of 0.924 mm and 0.979 mm and axial resolutions of 0.737 mm and 0.966 mm for the two methods, respectively. Both strategies successfully realize 360$^\circ$ 3-D imaging, and with GPU acceleration, the full-wavefield 3-D reconstruction time is reduced from 2193 s to approximately 192 s. The proposed approach provides a practical solution for transrectal 3-D MITAI and, when combined with efficient large-area microwave illumination and potentially with conventional ultrasound readout, has strong potential for multimodal intracavitary applications such as rectum and surrounding vasculature imaging, where complementary acoustic structural and electromagnetic functional information could improve diagnostic accuracy.
- 22 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 13 (5) , 9590-9604
Joint Localization and Synchronization for Fully Asynchronous Time-Division Broadcast Positioning Systems With Mobile Terminals
Time-division broadcast positioning systems offer advantages such as low implementation complexity and support for an unlimited number of passive receivers. However, most existing joint localization and synchronization (JLAS) methods for moving terminals rely on the assumption of pre-synchronized base stations (BSs), which restricts their flexibility and scalability in ad hoc or large-scale deployments. This article proposes a fully asynchronous JLAS (FA-JLAS) framework that operates without any prior inter-BS synchronization. We derive a new set of composite observables, the symmetric asynchronous time difference of arrival (SA-TDOA) and the interframe difference observable (IFDO), from timestamp measurements shared among BSs. These observables are designed to analytically eliminate nuisance parameters, including clock offsets and static non-line-of-sight (NLOS) delays. Based on these observables, a maximum a posteriori (MAP)-based estimation framework is developed that incorporates motion priors and jointly estimates the kinematic state and network synchronization parameters of user equipment (UE), thereby improving robustness in challenging 3-D environments. Theoretical performance bounds are derived using the Cramér–Rao lower bound (CRLB), and simulation results demonstrate that the FA-JLAS framework achieves near-CRLB accuracy across various scenarios.
- 22 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 13 (5) , 9590-9604
Joint Localization and Synchronization for Fully Asynchronous Time-Division Broadcast Positioning Systems With Mobile Terminals
Time-division broadcast positioning systems offer advantages such as low implementation complexity and support for an unlimited number of passive receivers. However, most existing joint localization and synchronization (JLAS) methods for moving terminals rely on the assumption of pre-synchronized base stations (BSs), which restricts their flexibility and scalability in ad hoc or large-scale deployments. This article proposes a fully asynchronous JLAS (FA-JLAS) framework that operates without any prior inter-BS synchronization. We derive a new set of composite observables, the symmetric asynchronous time difference of arrival (SA-TDOA) and the interframe difference observable (IFDO), from timestamp measurements shared among BSs. These observables are designed to analytically eliminate nuisance parameters, including clock offsets and static non-line-of-sight (NLOS) delays. Based on these observables, a maximum a posteriori (MAP)-based estimation framework is developed that incorporates motion priors and jointly estimates the kinematic state and network synchronization parameters of user equipment (UE), thereby improving robustness in challenging 3-D environments. Theoretical performance bounds are derived using the Cramér–Rao lower bound (CRLB), and simulation results demonstrate that the FA-JLAS framework achieves near-CRLB accuracy across various scenarios.
- Open Access
- 20 July 2024
- Published by MDPI AG in Remote Sensing
- Vol. 16 (14) , 2662
An Effective Scheme for Modeling and Compensating Differential Age Errors in Real-Time Kinematic Positioning
In many real-time kinematic (RTK) positioning applications, reference observations are transmitted over wireless links that can experience frequent interruptions or substantial delays. This results in large differential ages between base and rover observations, which, in turn, leads to a deterioration in positioning performance. To bridge the significant age difference, in this work, we propose a simple and effective scheme for modeling and compensating for such errors. Firstly, the overall differential age error was modeled using truncated Taylor expansion. Then, a time-differenced carrier phase (TDCP)-based observation model was established to estimate the errors with the Kalman framework. Since estimating the receiver’s clock error is unnecessary, equivalent transformation and sequential filtering technology were adopted to significantly reduce the computational complexity. Furthermore, a predictor performance monitor was introduced to mitigate the integrity risks that may occur due to model mismatches. The effectiveness of this scheme was validated by static and dynamic field experiments. The static experiment results showed that when the differential age was 60 s, the GPS and BDS satellites’ overall root mean square error (RMSE) with the asynchronous RTK (ARTK) prediction method was 2.8 and 5.5 times that of the proposed method, respectively. Moreover, when the differential age was 120 s, these values were 3.3 and 5.4 times that of the proposed method, respectively. The field experiment results showed that when the differential age was 60 s, the integer ambiguity fixed rate and false fixed rate of the ARTK method were 0.90 and 1.63 times that of the proposed method, respectively. Finally, at a 120 s differential age, these values were 0.78 and 4.78 times that of the proposed, respectively.
- 20 July 2024
- Published by MDPI AG in Remote Sensing
- Vol. 16 (14) , 2662
Open AccessAn Effective Scheme for Modeling and Compensating Differential Age Errors in Real-Time Kinematic Positioning
In many real-time kinematic (RTK) positioning applications, reference observations are transmitted over wireless links that can experience frequent interruptions or substantial delays. This results in large differential ages between base and rover observations, which, in turn, leads to a deterioration in positioning performance. To bridge the significant age difference, in this work, we propose a simple and effective scheme for modeling and compensating for such errors. Firstly, the overall differential age error was modeled using truncated Taylor expansion. Then, a time-differenced carrier phase (TDCP)-based observation model was established to estimate the errors with the Kalman framework. Since estimating the receiver’s clock error is unnecessary, equivalent transformation and sequential filtering technology were adopted to significantly reduce the computational complexity. Furthermore, a predictor performance monitor was introduced to mitigate the integrity risks that may occur due to model mismatches. The effectiveness of this scheme was validated by static and dynamic field experiments. The static experiment results showed that when the differential age was 60 s, the GPS and BDS satellites’ overall root mean square error (RMSE) with the asynchronous RTK (ARTK) prediction method was 2.8 and 5.5 times that of the proposed method, respectively. Moreover, when the differential age was 120 s, these values were 3.3 and 5.4 times that of the proposed method, respectively. The field experiment results showed that when the differential age was 60 s, the integer ambiguity fixed rate and false fixed rate of the ARTK method were 0.90 and 1.63 times that of the proposed method, respectively. Finally, at a 120 s differential age, these values were 0.78 and 4.78 times that of the proposed, respectively.
- 8 July 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (2)
Transcranial thermoacoustic imaging based on the fast back-projection algorithm with nonuniform speed of sound layering
Thermoacoustic imaging (TAI) has the potential for detecting hemorrhagic stroke. However, in transcranial TAI, the speed of sound (SoS) between the skull and brain tissue varies significantly. Therefore, if the image reconstruction assumes a uniform SoS, accurately locating the hemorrhagic lesion becomes challenging. In this Letter, we propose a fast inhomogeneous layer back-projection (BP) method based on the basic boundary line with a statistical approach to reconstruct TA images for noninvasive and non-ionizing hemorrhage detection. To validate our proposed method, we conducted numerical simulations using real human skull data and two phantom transcranial TAI experiments. In the numerical simulation, the proposed method improves the structural similarity index measure from 0.034 879 for BP with uniform SoS to 0.624 44. The phantom experimental results demonstrate that the proposed method renders the targets in the reconstructed image more consistent with the real targets. In the case of considering a three-layer SoS distribution, the time reversal method requires 1 min and 37.391 s to reconstruct a 201 × 201 pixels TA image. Meanwhile, the proposed method accomplishes the same-sized TA image reconstruction in only 2.113 397 s. The simulation and experimental results indicate that the proposed method enhances TAI's ability for accurate and fast identification of cerebral hemorrhage.
- 8 July 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (2)
Transcranial thermoacoustic imaging based on the fast back-projection algorithm with nonuniform speed of sound layering
Thermoacoustic imaging (TAI) has the potential for detecting hemorrhagic stroke. However, in transcranial TAI, the speed of sound (SoS) between the skull and brain tissue varies significantly. Therefore, if the image reconstruction assumes a uniform SoS, accurately locating the hemorrhagic lesion becomes challenging. In this Letter, we propose a fast inhomogeneous layer back-projection (BP) method based on the basic boundary line with a statistical approach to reconstruct TA images for noninvasive and non-ionizing hemorrhage detection. To validate our proposed method, we conducted numerical simulations using real human skull data and two phantom transcranial TAI experiments. In the numerical simulation, the proposed method improves the structural similarity index measure from 0.034 879 for BP with uniform SoS to 0.624 44. The phantom experimental results demonstrate that the proposed method renders the targets in the reconstructed image more consistent with the real targets. In the case of considering a three-layer SoS distribution, the time reversal method requires 1 min and 37.391 s to reconstruct a 201 × 201 pixels TA image. Meanwhile, the proposed method accomplishes the same-sized TA image reconstruction in only 2.113 397 s. The simulation and experimental results indicate that the proposed method enhances TAI's ability for accurate and fast identification of cerebral hemorrhage.
- 1 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 25 (9) , 11946-11960
An Enhanced GNSS/MINS Integrated Navigation System With a Wheel Velocity Predictor Based on Vehicle Dynamics Model
The GNSS/INS integrated navigation system is widely used in intelligent vehicles. Due to the vulnerability of GNSS and the low accuracy of low-cost inertial devices, the performance of dead reckoning during GNSS outages is of great concern. The non-holonomic constraint (NHC) is a widely used method to improve dead reckoning performance, but it ignores the sideslip effect caused by tire deformation, which leads to performance degradation. The conventional vehicle dynamics model can achieve higher accuracy by modeling tire sideslip effects; however, its parameters are often complex and challenging to obtain. This work proposes a novel wheel velocity predictor (WVP) based on the vehicle dynamics model, which models tire sideslip effects while having concise and easy-to-estimate parameters. Based on this model, an integrated navigation system is proposed, which can adaptively estimate WVP parameters when GNSS is available and use the additional information from trained WVP to improve navigation performance during GNSS outages. Notably, the proposed system utilizes a more accurate model than conventional NHC while avoiding requiring additional sensors or complex prior vehicle dynamics model parameters. Field experiments have shown that the proposed scheme can accurately estimate the tire sideslip angle in real-time and significantly improve dead reckoning performance compared with the NHC-based method. Furthermore, as part of the WVP parameters, the inertial measurement unit mounting angles can be estimated even with a non-straight driving trajectory. Compared with the NHC-based method, which requires a straight driving trajectory to converge, the application limitation is significantly relaxed.
- 1 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 25 (9) , 11946-11960
An Enhanced GNSS/MINS Integrated Navigation System With a Wheel Velocity Predictor Based on Vehicle Dynamics Model
The GNSS/INS integrated navigation system is widely used in intelligent vehicles. Due to the vulnerability of GNSS and the low accuracy of low-cost inertial devices, the performance of dead reckoning during GNSS outages is of great concern. The non-holonomic constraint (NHC) is a widely used method to improve dead reckoning performance, but it ignores the sideslip effect caused by tire deformation, which leads to performance degradation. The conventional vehicle dynamics model can achieve higher accuracy by modeling tire sideslip effects; however, its parameters are often complex and challenging to obtain. This work proposes a novel wheel velocity predictor (WVP) based on the vehicle dynamics model, which models tire sideslip effects while having concise and easy-to-estimate parameters. Based on this model, an integrated navigation system is proposed, which can adaptively estimate WVP parameters when GNSS is available and use the additional information from trained WVP to improve navigation performance during GNSS outages. Notably, the proposed system utilizes a more accurate model than conventional NHC while avoiding requiring additional sensors or complex prior vehicle dynamics model parameters. Field experiments have shown that the proposed scheme can accurately estimate the tire sideslip angle in real-time and significantly improve dead reckoning performance compared with the NHC-based method. Furthermore, as part of the WVP parameters, the inertial measurement unit mounting angles can be estimated even with a non-straight driving trajectory. Compared with the NHC-based method, which requires a straight driving trajectory to converge, the application limitation is significantly relaxed.
- 3 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 71 (4) , 1944-1948
A Wideband Circularly Polarized Antenna With High Impulse Signal Fidelity for IR-UWB Positioning Applications
A wideband circularly polarized (CP) antenna with conical-beam radiation is designed by a circular monopolar patch antenna (CMPA) with a tapered feeding, eight shorting pins, and eight sickle-shaped branches in the ground plane. Firstly, the TM01 and TM02 modes and the sickle-shaped branches are presented to generate the radiated θ-polarization and φ-polarization components, respectively. Secondly, a tapered feeding probe with a larger radius is then employed to reduce the input resistance and improve the impedance matching of this antenna fed at the center. Therefore, the proposed antenna has a 10dB impedance bandwidth of 46.8% and a 3dB axial ratio (AR) bandwidth of 36.7%. Consequently, the attractive performance of the antenna with high impulse signal fidelity (97.4%) demonstrates its capacity for impulse-radio ultra-wideband (IR-UWB) positioning applications in a multipath interference environment.
- 3 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 71 (4) , 1944-1948
A Wideband Circularly Polarized Antenna With High Impulse Signal Fidelity for IR-UWB Positioning Applications
A wideband circularly polarized (CP) antenna with conical-beam radiation is designed by a circular monopolar patch antenna (CMPA) with a tapered feeding, eight shorting pins, and eight sickle-shaped branches in the ground plane. Firstly, the TM01 and TM02 modes and the sickle-shaped branches are presented to generate the radiated θ-polarization and φ-polarization components, respectively. Secondly, a tapered feeding probe with a larger radius is then employed to reduce the input resistance and improve the impedance matching of this antenna fed at the center. Therefore, the proposed antenna has a 10dB impedance bandwidth of 46.8% and a 3dB axial ratio (AR) bandwidth of 36.7%. Consequently, the attractive performance of the antenna with high impulse signal fidelity (97.4%) demonstrates its capacity for impulse-radio ultra-wideband (IR-UWB) positioning applications in a multipath interference environment.
- Open Access
- 10 September 2022
- Published by Wiley in International Journal of Antennas and Propagation
- Vol. 2022, 1-6
Near-Field Electromagnetic Scatterings and Imaging of a Ship Based on High-Frequency Techniques
In radar detection, it is important to investigate the near-field scattering characteristics since the far-field condition is not easily satisfied for the distance between the radar and the electrically large ship on the sea surface. A high-frequency techniques of the physical optics (PO) and shooting and bouncing rays (SBR) with local expansions based on the facets of the target are proposed to take the electromagnetic scatterings in the near zone. Therefore, it is a more straightforward method to modify the computation from traditional far-field problem to near-field problem with the singularity-free characteristic. Simulation results show that it has high accuracy but requires very little increase in computational costs in the near-field problem. Moreover, the 1-D high-resolution range profile (HRRP) demonstrates that the near-field scattering mechanism is much different from the cases in the traditional far-field problem.
- 10 September 2022
- Published by Wiley in International Journal of Antennas and Propagation
- Vol. 2022, 1-6
Open AccessNear-Field Electromagnetic Scatterings and Imaging of a Ship Based on High-Frequency Techniques
In radar detection, it is important to investigate the near-field scattering characteristics since the far-field condition is not easily satisfied for the distance between the radar and the electrically large ship on the sea surface. A high-frequency techniques of the physical optics (PO) and shooting and bouncing rays (SBR) with local expansions based on the facets of the target are proposed to take the electromagnetic scatterings in the near zone. Therefore, it is a more straightforward method to modify the computation from traditional far-field problem to near-field problem with the singularity-free characteristic. Simulation results show that it has high accuracy but requires very little increase in computational costs in the near-field problem. Moreover, the 1-D high-resolution range profile (HRRP) demonstrates that the near-field scattering mechanism is much different from the cases in the traditional far-field problem.
- 17 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Letters
- Vol. 19 (1545598X) , 1-5
An Effective High-Frequency Method for the Near-Field Scattering From an Electrically Large Ship Illuminated by a Hertzian Dipole
This letter is dedicated to develop an effective high-frequency method for the near-field (NF) scattering from an electrically large ship illuminated by a Hertzian dipole. First, for primary illumination, a local expansion technique based on the facets of the target is introduced to account the NF scattering, which has a singularity-free characteristic. Second, for secondary rays, the ray-generation technique on the sphere grid is proposed to reduce the number of ray tubes. And the ray-tracing strategy based on one central ray is proposed to accelerate the tracing process, which benefits to the parallelism by utilizing the graphics processing unit (GPU). Therefore, it is particularly attractive since the proposed method requires very little increase in computational cost and yields a good accuracy in the NF scattering computation of an electrically large ship problem.
- 17 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Letters
- Vol. 19 (1545598X) , 1-5
An Effective High-Frequency Method for the Near-Field Scattering From an Electrically Large Ship Illuminated by a Hertzian Dipole
This letter is dedicated to develop an effective high-frequency method for the near-field (NF) scattering from an electrically large ship illuminated by a Hertzian dipole. First, for primary illumination, a local expansion technique based on the facets of the target is introduced to account the NF scattering, which has a singularity-free characteristic. Second, for secondary rays, the ray-generation technique on the sphere grid is proposed to reduce the number of ray tubes. And the ray-tracing strategy based on one central ray is proposed to accelerate the tracing process, which benefits to the parallelism by utilizing the graphics processing unit (GPU). Therefore, it is particularly attractive since the proposed method requires very little increase in computational cost and yields a good accuracy in the NF scattering computation of an electrically large ship problem.
- 30 July 2018
- Published by AIP Publishing in Applied Physics Letters
- Vol. 113 (5) , 053701
Efficient dictionary construction method for microwave induced thermoacoustic compressive sensing imaging
Microwave induced thermoacoustic imaging based on compressed sensing (CS) has proved to be a promising imaging method, especially in limited-view problems. However, the construction of the thermoacoustic dictionary in current CS-based methods may not be feasible for the real-world application due to the long construction time and large memory consumption. To address the cumbersome dictionary construction problem in the CS-based method, we propose an efficient solution by simplifying the forward solution of the wave equation which enables a fast calculation of the thermoacoustic dictionary through a time-shifting operation. In addition, by combining the temporal sparsity of the thermoacoustic signal, the dictionary can be compressed, resulting in a significant memory saving. We validated the proposed dictionary construction method using CS-based reconstruction by imaging numerical, biological phantoms and ex-vivo breast tissue and compared the image quality with the state-of-the-art reconstruction methods. A good image quality, fast construction time, and economical memory consumption demonstrate the potential of the proposed dictionary construction method in CS-based reconstruction for the real-world application.
- 30 July 2018
- Published by AIP Publishing in Applied Physics Letters
- Vol. 113 (5) , 053701
Efficient dictionary construction method for microwave induced thermoacoustic compressive sensing imaging
Microwave induced thermoacoustic imaging based on compressed sensing (CS) has proved to be a promising imaging method, especially in limited-view problems. However, the construction of the thermoacoustic dictionary in current CS-based methods may not be feasible for the real-world application due to the long construction time and large memory consumption. To address the cumbersome dictionary construction problem in the CS-based method, we propose an efficient solution by simplifying the forward solution of the wave equation which enables a fast calculation of the thermoacoustic dictionary through a time-shifting operation. In addition, by combining the temporal sparsity of the thermoacoustic signal, the dictionary can be compressed, resulting in a significant memory saving. We validated the proposed dictionary construction method using CS-based reconstruction by imaging numerical, biological phantoms and ex-vivo breast tissue and compared the image quality with the state-of-the-art reconstruction methods. A good image quality, fast construction time, and economical memory consumption demonstrate the potential of the proposed dictionary construction method in CS-based reconstruction for the real-world application.