Rasmus Nøddegaard Hansen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Rasmus Nøddegaard Hansen has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
Endrit Hoxha
Department of the Built Environment, Aalborg University, Copenhagen, Denmark
4 shared publicationsF N Rasmussen
Dept. of Civil and Environmental Engineering, Norwegian University of Science and Technology (NTNU), Trondheim, Norway
3 shared publicationsH Birgisdottir
Dept. of the Built Environment, Aalborg University (AAU), Copenhagen, Denmark
3 shared publications- Harpa Birgisdottir
Department of the Built Environment, Aalborg University, 2450 Copenhagen, Denmark
3 shared publications Harpa Birgisdóttir
Department of the Built Environment, Aalborg University, Copenhagen, Denmark
3 shared publicationsC E Andersen
Dept. of the Built Environment, Aalborg University (AAU), Copenhagen, Denmark
2 shared publications
Latest Publications
- Open Access
- 18 August 2026
- Published by Springer Nature in Journal of Industrial Ecology
- Vol. 30 (5) , 2367-2384
Forecast of building materials and their related environmental impacts: comparing wood-based and conventional construction pathways
The building sector is a major contributor to global greenhouse gas emissions (GHGe), necessitating carbon mitigating strategies to reduce its environmental impact. This study investigates the environmental implications of two construction pathways in Denmark—wood-based and conventional—projecting material flows and emissions from 2025 to 2050. Using life cycle assessments (LCA) for 16 case buildings across multiple typologies, the study evaluates the potential for wood-based materials to reduce GHGe compared to conventional materials. The results highlight significant environmental benefits of wood-based pathways, particularly in reducing upfront GHGe and the reliance on non-renewable resources. However, the findings indicate that annual emissions account for 49% and 96% of Denmark’s allocated share of the global carbon budget for the wood-based and conventional pathways, respectively, underscoring the pressing need for systemic changes in the construction industry. Comprehensive strategies integrating biobased solutions, circular economy principles, and reduced reliance on new construction are critical to achieving Denmark’s climate goals.
- 18 August 2026
- Published by Springer Nature in Journal of Industrial Ecology
- Vol. 30 (5) , 2367-2384
Open AccessForecast of building materials and their related environmental impacts: comparing wood-based and conventional construction pathways
The building sector is a major contributor to global greenhouse gas emissions (GHGe), necessitating carbon mitigating strategies to reduce its environmental impact. This study investigates the environmental implications of two construction pathways in Denmark—wood-based and conventional—projecting material flows and emissions from 2025 to 2050. Using life cycle assessments (LCA) for 16 case buildings across multiple typologies, the study evaluates the potential for wood-based materials to reduce GHGe compared to conventional materials. The results highlight significant environmental benefits of wood-based pathways, particularly in reducing upfront GHGe and the reliance on non-renewable resources. However, the findings indicate that annual emissions account for 49% and 96% of Denmark’s allocated share of the global carbon budget for the wood-based and conventional pathways, respectively, underscoring the pressing need for systemic changes in the construction industry. Comprehensive strategies integrating biobased solutions, circular economy principles, and reduced reliance on new construction are critical to achieving Denmark’s climate goals.
- Open Access
- 17 June 2026
- Published by Springer Nature in The International Journal of Life Cycle Assessment
- Vol. 31 (7)
Assessing biodiversity impacts of buildings: an evaluation of building elements and limitations in current assessment methods
Purpose: This study evaluated the life cycle biodiversity impact of building exterior walls. While climate change is well-studied and addressed in the construction sector, its impact on nature and biodiversity remains underexplored. The aim of this article is to assess the consistency of different life cycle impact assessment (LCIA) methods and evaluate the biodiversity impact of various exterior wall systems that integrate conventional to biobased material. Method: Using the life cycle assessment (LCA) method and the Ecoinvent database, we analysed seven exterior wall systems adhering to Danish building regulations of 2018. Impacts were assessed by the LCIA methods ReCiPe 2016, LC-IMPACT, and EN 15,804 + A2, and Environmental Product Declarations (EPDs) impact data for exterior wall construction products. Product-specific midpoint categories were converted to biodiversity impacts by using unit conversion factors from ReCiPe 2016. Land use in EN 15,804 + A2 was reconciled with other LCIA methods using linear regression. The examined wall types include steel, concrete, timber, cross-laminated timber, and products incorporating hemp and straw. Results: The biodiversity rank of the seven wall systems were consistent across LCIA methods, with minor variations. The midpoint contributions appeared to vary more across methods, while the most considerable pressures generally were identified as ecotoxicity, terrestrial acidification, land use, and climate change. Gaps in EPD midpoint categories were detected, including land use indicator incompatibility and exclusions of marine and terrestrial ecotoxicity categories. Conclusions: Consistent biodiversity rankings suggest that the LCIA methods are useful for decision‑making. However, variations in midpoint contributions may affect the prioritisation of mitigation efforts. It is not possible to conclude whether conventional or more biobased building elements have the least biodiversity impact because results fluctuate depending on the structural system. Aggregated land use factors in LCIA methods, particularly ReCiPe 2016, require refinement for forestry, metal and mineral extraction. Therefore, standardisation and legislative frameworks for LCA practices in the built environment should address and include the missing and incompatible midpoint categories.
- 17 June 2026
- Published by Springer Nature in The International Journal of Life Cycle Assessment
- Vol. 31 (7)
Open AccessAssessing biodiversity impacts of buildings: an evaluation of building elements and limitations in current assessment methods
Purpose: This study evaluated the life cycle biodiversity impact of building exterior walls. While climate change is well-studied and addressed in the construction sector, its impact on nature and biodiversity remains underexplored. The aim of this article is to assess the consistency of different life cycle impact assessment (LCIA) methods and evaluate the biodiversity impact of various exterior wall systems that integrate conventional to biobased material. Method: Using the life cycle assessment (LCA) method and the Ecoinvent database, we analysed seven exterior wall systems adhering to Danish building regulations of 2018. Impacts were assessed by the LCIA methods ReCiPe 2016, LC-IMPACT, and EN 15,804 + A2, and Environmental Product Declarations (EPDs) impact data for exterior wall construction products. Product-specific midpoint categories were converted to biodiversity impacts by using unit conversion factors from ReCiPe 2016. Land use in EN 15,804 + A2 was reconciled with other LCIA methods using linear regression. The examined wall types include steel, concrete, timber, cross-laminated timber, and products incorporating hemp and straw. Results: The biodiversity rank of the seven wall systems were consistent across LCIA methods, with minor variations. The midpoint contributions appeared to vary more across methods, while the most considerable pressures generally were identified as ecotoxicity, terrestrial acidification, land use, and climate change. Gaps in EPD midpoint categories were detected, including land use indicator incompatibility and exclusions of marine and terrestrial ecotoxicity categories. Conclusions: Consistent biodiversity rankings suggest that the LCIA methods are useful for decision‑making. However, variations in midpoint contributions may affect the prioritisation of mitigation efforts. It is not possible to conclude whether conventional or more biobased building elements have the least biodiversity impact because results fluctuate depending on the structural system. Aggregated land use factors in LCIA methods, particularly ReCiPe 2016, require refinement for forestry, metal and mineral extraction. Therefore, standardisation and legislative frameworks for LCA practices in the built environment should address and include the missing and incompatible midpoint categories.
- Open Access
- 20 September 2024
- Published by Elsevier in Resources, Conservation and Recycling
- Vol. 212
Reducing the land-use impact of wooden buildings with fast-growing biobased materials: A Danish case study
- 20 September 2024
- Published by Elsevier in Resources, Conservation and Recycling
- Vol. 212
Open AccessReducing the land-use impact of wooden buildings with fast-growing biobased materials: A Danish case study
- Open Access
- 1 November 2023
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2600 (15) , 152023
Readjusting the climate change hyperfocus: how expanding the scope of impact categories will affect the evaluation of wood buildings
The sole focus on reducing the climate impact of dwellings by using wood is neglecting other impacts on nature. Therefore, this study clarifies the potential burden shift by considering ten more impact categories than greenhouse gas emissions. It assesses four wood buildings and one reference concrete building by using the method of life cycle assessment. What stands out is that wood dwellings perform better than the concrete building in most impact categories except for abiotic depletion potential and ozone layer depletion potential (ODP). The latter also experiences an impact increase when wood is used to decrease climate impact as global warming potential (GWP). The wood dwellings have a general inverse correlation between GWP ranking and ODP and some resource use indicators where plastics and cement-based materials influence the latter. Bio-based materials’ contribution to acidification and eutrophication is more considerable than to GWP. Upon the findings, increased inclusion of impact categories among researchers and practitioners must follow to expand the knowledge base. A foundation for future conscious decisions of using wood in dwellings and the challenging debate of reaching consent of which other impact categories should attain focus for being improved.
- 1 November 2023
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2600 (15) , 152023
Open AccessReadjusting the climate change hyperfocus: how expanding the scope of impact categories will affect the evaluation of wood buildings
The sole focus on reducing the climate impact of dwellings by using wood is neglecting other impacts on nature. Therefore, this study clarifies the potential burden shift by considering ten more impact categories than greenhouse gas emissions. It assesses four wood buildings and one reference concrete building by using the method of life cycle assessment. What stands out is that wood dwellings perform better than the concrete building in most impact categories except for abiotic depletion potential and ozone layer depletion potential (ODP). The latter also experiences an impact increase when wood is used to decrease climate impact as global warming potential (GWP). The wood dwellings have a general inverse correlation between GWP ranking and ODP and some resource use indicators where plastics and cement-based materials influence the latter. Bio-based materials’ contribution to acidification and eutrophication is more considerable than to GWP. Upon the findings, increased inclusion of impact categories among researchers and practitioners must follow to expand the knowledge base. A foundation for future conscious decisions of using wood in dwellings and the challenging debate of reaching consent of which other impact categories should attain focus for being improved.
- Open Access
- 1 November 2023
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2600 (18) , 182002
Closing the gap to sufficiency-based absolute climate targets for wood buildings
This research investigated the distribution of the global climate planetary boundary (PB) on a national scale. Then it was distributed to a sector-specific carrying capacity by the principles of acquired rights (grandfathering) and sufficientarianism. Then, four wood dwellings were compared against these carrying capacities using the life cycle assessment methodology. The climate safe operating space for new dwellings is about three times larger when using the principle of sufficiency compared to acquired rights. The rationale for the sufficiency perspective is that it considers the fundamentals of a society leading to a fulfilling life. The concept disregards the current surplus elements in society, which gives more space for emissions for the remaining elements in a fulfilling society. The acquired rights reflect the current society as optimal but require systemic changes in the different sectors to reduce their total impacts to remain within climate PB while keeping the sector’s current share of impacts. However, building with wood cannot alone contribute to society staying within the climate target. The end of life contributes most to the impact due to biogenic carbon release, and energy consumption follows next. Reduction of the average yearly built area shows considerable potential to close the target gap. In addition, improving and implementing circularity, carbon capture, and material efficiency would reduce biogenic carbon’s end of life impacts. Combined with energy-positive buildings and low-carbon materials, this could be a viable mitigation pathway to explore further.
- 1 November 2023
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2600 (18) , 182002
Open AccessClosing the gap to sufficiency-based absolute climate targets for wood buildings
This research investigated the distribution of the global climate planetary boundary (PB) on a national scale. Then it was distributed to a sector-specific carrying capacity by the principles of acquired rights (grandfathering) and sufficientarianism. Then, four wood dwellings were compared against these carrying capacities using the life cycle assessment methodology. The climate safe operating space for new dwellings is about three times larger when using the principle of sufficiency compared to acquired rights. The rationale for the sufficiency perspective is that it considers the fundamentals of a society leading to a fulfilling life. The concept disregards the current surplus elements in society, which gives more space for emissions for the remaining elements in a fulfilling society. The acquired rights reflect the current society as optimal but require systemic changes in the different sectors to reduce their total impacts to remain within climate PB while keeping the sector’s current share of impacts. However, building with wood cannot alone contribute to society staying within the climate target. The end of life contributes most to the impact due to biogenic carbon release, and energy consumption follows next. Reduction of the average yearly built area shows considerable potential to close the target gap. In addition, improving and implementing circularity, carbon capture, and material efficiency would reduce biogenic carbon’s end of life impacts. Combined with energy-positive buildings and low-carbon materials, this could be a viable mitigation pathway to explore further.
- Open Access
- 5 June 2023
- Published by Elsevier in Journal of Building Engineering
- Vol. 76
Enabling rapid prediction of quantities to accelerate LCA for decision support in the early building design
- 5 June 2023
- Published by Elsevier in Journal of Building Engineering
- Vol. 76
Open AccessEnabling rapid prediction of quantities to accelerate LCA for decision support in the early building design
- 15 December 2022
- Published by Springer Nature in The International Journal of Life Cycle Assessment
- Vol. 28 (2) , 131-145
A systematic review of consequential LCA on buildings: the perspectives and challenges of applications and inventory modelling
- 15 December 2022
- Published by Springer Nature in The International Journal of Life Cycle Assessment
- Vol. 28 (2) , 131-145
A systematic review of consequential LCA on buildings: the perspectives and challenges of applications and inventory modelling
- Open Access
- 1 September 2022
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1078 (1) , 012066
Wood as a carbon mitigating building material: A review of consequential LCA and biogenic carbon characteristics
Buildings can potentially be carbon sinks by use of wood under correct circumstances because wood sequesters CO2 i.e., biogenic carbon, from the atmosphere by photosynthesis during growth. Consequential life cycle assessment (CLCA) works as a decision support tool to assess consequences from a change in demand by including only the processes that are affected by this demand through market-based modelling. This study aims to review current research about CLCA on wood in buildings. First, by examining methodological approaches linked to CLCA modelling and biogenic carbon accounting of wood in buildings. Second, to evaluate conclusions of studies using CLCA on wood in buildings. We conducted a literature review of 13 articles that fulfilled the criteria of stating to conduct a CLCA concerning either buildings, components, or materials where wood is one of the materials. The application of the reviewed studies include: method development, reuse, testing end of life aspects, CLCA inventory modelling, and comparison of ACLA and CLCA. The CLCA inventory of small-scale studies comprise a wide spectrum of methods ranging from simplistic to advanced methods, often retrospective. All large-scale studies integrate sophisticated modelling of prospective analysis. Dynamic time-dependent biogenic carbon accounting and indirect land use change (iLUC) are rarely represented. Although, both aspects have an impact on whether wood buildings respectively work as carbon sinks or provide net GHG emissions. Wood multi-storey buildings generally perform environmentally better than concrete and steel buildings due to wood displaces these materials and residues substitute fossil energy. End of life scenarios, choice of substituted production, retro- and prospective data, and the share of recycled steel further influence carbon mitigating potential of wood in buildings. Research of CLCA on wood in buildings are many-fold. Some studies partially evade inclusion of some CLCA aspects i.e., market delimitation, market trend, affected suppliers, and substitution. A simultaneously high integration of both CLCA, time-dependent biogenic carbon accounting, and iLUC in the same study is almost absent. Consequently, more empirical and methodological CLCA studies are needed while including dynamic time-dependent biogenic carbon accounting to improve understanding of implications of policy decisions in transitions towards increased use of wood in buildings.
- 1 September 2022
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1078 (1) , 012066
Open AccessWood as a carbon mitigating building material: A review of consequential LCA and biogenic carbon characteristics
Buildings can potentially be carbon sinks by use of wood under correct circumstances because wood sequesters CO2 i.e., biogenic carbon, from the atmosphere by photosynthesis during growth. Consequential life cycle assessment (CLCA) works as a decision support tool to assess consequences from a change in demand by including only the processes that are affected by this demand through market-based modelling. This study aims to review current research about CLCA on wood in buildings. First, by examining methodological approaches linked to CLCA modelling and biogenic carbon accounting of wood in buildings. Second, to evaluate conclusions of studies using CLCA on wood in buildings. We conducted a literature review of 13 articles that fulfilled the criteria of stating to conduct a CLCA concerning either buildings, components, or materials where wood is one of the materials. The application of the reviewed studies include: method development, reuse, testing end of life aspects, CLCA inventory modelling, and comparison of ACLA and CLCA. The CLCA inventory of small-scale studies comprise a wide spectrum of methods ranging from simplistic to advanced methods, often retrospective. All large-scale studies integrate sophisticated modelling of prospective analysis. Dynamic time-dependent biogenic carbon accounting and indirect land use change (iLUC) are rarely represented. Although, both aspects have an impact on whether wood buildings respectively work as carbon sinks or provide net GHG emissions. Wood multi-storey buildings generally perform environmentally better than concrete and steel buildings due to wood displaces these materials and residues substitute fossil energy. End of life scenarios, choice of substituted production, retro- and prospective data, and the share of recycled steel further influence carbon mitigating potential of wood in buildings. Research of CLCA on wood in buildings are many-fold. Some studies partially evade inclusion of some CLCA aspects i.e., market delimitation, market trend, affected suppliers, and substitution. A simultaneously high integration of both CLCA, time-dependent biogenic carbon accounting, and iLUC in the same study is almost absent. Consequently, more empirical and methodological CLCA studies are needed while including dynamic time-dependent biogenic carbon accounting to improve understanding of implications of policy decisions in transitions towards increased use of wood in buildings.
- Open Access
Environmental Product Declarations of Structural Wood: A Review of Impacts and Potential Pitfalls for Practice
The use of wood and timber products in the construction of buildings is repeatedly pointed towards as a mean for lowering the environmental footprint. With several countries preparing regulation for life cycle assessment of buildings, practitioners from industry will presumably look to the pool of data on wood products found in environmental product declarations (EPDs). However, the EPDs may vary broadly in terms of reporting and results. This study provides a comprehensive review of 81 third-party verified EN 15804 EPDs of cross laminated timber (CLT), glulam, laminated veneer lumber (LVL) and timber. The 81 EPDs represent 86 different products and 152 different product scenarios. The EPDs mainly represent European production, but also North America and Australia/New Zealand productions are represented. Reported global warming potential (GWP) from the EPDs vary within each of the investigated product categories, due to density of the products and the end-of-life scenarios applied. Median results per kg of product, excluding the biogenic CO2, are found at 0.26, 0.24, and 0.17 kg CO2e for CLT, glulam, and timber, respectively. Results further showed that the correlation between GWP and other impact categories is limited. Analysis of the inherent data uncertainty showed to add up to ±41% to reported impacts when assessed with an uncertainty method from the literature. However, in some of the average EPDs, even larger uncertainties of up to 90% for GWP are reported. Life cycle assessment practitioners can use the median values from this study as generic data in their assessments of buildings. To make the EPDs easier to use for practitioners, a more detailed coordination between EPD programs and their product category rules is recommended, as well as digitalization of EPD data.
Open AccessEnvironmental Product Declarations of Structural Wood: A Review of Impacts and Potential Pitfalls for Practice
The use of wood and timber products in the construction of buildings is repeatedly pointed towards as a mean for lowering the environmental footprint. With several countries preparing regulation for life cycle assessment of buildings, practitioners from industry will presumably look to the pool of data on wood products found in environmental product declarations (EPDs). However, the EPDs may vary broadly in terms of reporting and results. This study provides a comprehensive review of 81 third-party verified EN 15804 EPDs of cross laminated timber (CLT), glulam, laminated veneer lumber (LVL) and timber. The 81 EPDs represent 86 different products and 152 different product scenarios. The EPDs mainly represent European production, but also North America and Australia/New Zealand productions are represented. Reported global warming potential (GWP) from the EPDs vary within each of the investigated product categories, due to density of the products and the end-of-life scenarios applied. Median results per kg of product, excluding the biogenic CO2, are found at 0.26, 0.24, and 0.17 kg CO2e for CLT, glulam, and timber, respectively. Results further showed that the correlation between GWP and other impact categories is limited. Analysis of the inherent data uncertainty showed to add up to ±41% to reported impacts when assessed with an uncertainty method from the literature. However, in some of the average EPDs, even larger uncertainties of up to 90% for GWP are reported. Life cycle assessment practitioners can use the median values from this study as generic data in their assessments of buildings. To make the EPDs easier to use for practitioners, a more detailed coordination between EPD programs and their product category rules is recommended, as well as digitalization of EPD data.