Guanwei Liang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Guanwei Liang has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
- Zongtao Li
South China University of Technology
6 shared publications - Jiasheng Li
South China University of Technology
5 shared publications Caiman Yan
National and Local Joint Engineering Research Center of Semiconductor Display and VLC Devices, School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou, China
2 shared publications- Shudong Yu
School of Advanced Manufacturing Sun Yat‐Sen University Shenzhen China
2 shared publications Yikai Yuan
Foshan Nationstar Optoelectronics Co. Ltd., Foshan 528000, China
2 shared publications- Yong Tang
School of Accounting, Southwestern University of Finance and Economics, Chengdu, Sichuan, China
2 shared publications
Latest Publications
- Open Access
Recent Advances in Porous Polymer-Based Flexible Piezoresistive Pressure Sensors
With the rapid development of wearable devices and intelligent human–machine interaction technologies, the demand for high-precision pressure sensors has soared. Piezoresistive pressure sensors excel due to their simple structure, low cost, and high sensitivity, among which flexible piezoresistive pressure sensors based on porous polymers have become a research focus, thanks to their unique 3D porous structure and excellent performance. This review summarizes recent advances: it introduces key performance metrics and the piezoresistive sensing mechanism; outlines porous structure preparation methods (phase separation, 3D printing, electrospinning) with their principles, advantages, and limitations; examines conductive fillers (carbon-based, polymer, metal, MXene) with their properties and applications; and highlights flexible substrates (silicone, polyurethane, polyimide, natural polymers) in ensuring mechanical compliance and device integration. Studies show material innovation, structural optimization, and process improvement can significantly enhance sensor accuracy, stability, and durability, helping break traditional performance bottlenecks. Future prospects are broad in tactile sensing, biomedical monitoring, and human–machine interaction, providing references for related research and industrial development.
Open AccessRecent Advances in Porous Polymer-Based Flexible Piezoresistive Pressure Sensors
With the rapid development of wearable devices and intelligent human–machine interaction technologies, the demand for high-precision pressure sensors has soared. Piezoresistive pressure sensors excel due to their simple structure, low cost, and high sensitivity, among which flexible piezoresistive pressure sensors based on porous polymers have become a research focus, thanks to their unique 3D porous structure and excellent performance. This review summarizes recent advances: it introduces key performance metrics and the piezoresistive sensing mechanism; outlines porous structure preparation methods (phase separation, 3D printing, electrospinning) with their principles, advantages, and limitations; examines conductive fillers (carbon-based, polymer, metal, MXene) with their properties and applications; and highlights flexible substrates (silicone, polyurethane, polyimide, natural polymers) in ensuring mechanical compliance and device integration. Studies show material innovation, structural optimization, and process improvement can significantly enhance sensor accuracy, stability, and durability, helping break traditional performance bottlenecks. Future prospects are broad in tactile sensing, biomedical monitoring, and human–machine interaction, providing references for related research and industrial development.
- 2 May 2023
- Published by ASME International in Journal of Electronic Packaging
- Vol. 146 (1) , 1-32
Improving Ambient Contrast Ratio of Display Device at Oblique Angle Using a Fe3O4-Magnetic Particle Chained Pillar Array Structure
A high ambient contrast ratio (ACR) is essential for achieving a high dynamic range in advanced display applications, but reported ACR enhancement strategies always result in reduced optical efficiency of light-emitting diode (LED) display devices. In this study, an Fe3O4-magnetic particle-chained pillar array (Fe3O4-MPCP) structure was introduced to improve the ACR of LED display devices with low optical loss. The results indicated that the MPCP structure achieved high ACR at an oblique angle using surface pillar array to suppress ambient light reflections, and its internal magnetic particle chain improved the transmissivity to maintain high device efficiency. Compared with the commercial graphite-coated device at typical viewing angles (i.e., 0° and 60°), the ACR of the optimal MPCP device increased by 217 and 140%, while the device efficiency increased by 25 and 12%, respectively. Therefore, the proposed method provides a novel approach for significantly improving ACR at all oblique angles while maintaining high device efficiency, which can be easily integrated into various LED display devices and has significant potential in advanced display applications.
- 2 May 2023
- Published by ASME International in Journal of Electronic Packaging
- Vol. 146 (1) , 1-32
Improving Ambient Contrast Ratio of Display Device at Oblique Angle Using a Fe3O4-Magnetic Particle Chained Pillar Array Structure
A high ambient contrast ratio (ACR) is essential for achieving a high dynamic range in advanced display applications, but reported ACR enhancement strategies always result in reduced optical efficiency of light-emitting diode (LED) display devices. In this study, an Fe3O4-magnetic particle-chained pillar array (Fe3O4-MPCP) structure was introduced to improve the ACR of LED display devices with low optical loss. The results indicated that the MPCP structure achieved high ACR at an oblique angle using surface pillar array to suppress ambient light reflections, and its internal magnetic particle chain improved the transmissivity to maintain high device efficiency. Compared with the commercial graphite-coated device at typical viewing angles (i.e., 0° and 60°), the ACR of the optimal MPCP device increased by 217 and 140%, while the device efficiency increased by 25 and 12%, respectively. Therefore, the proposed method provides a novel approach for significantly improving ACR at all oblique angles while maintaining high device efficiency, which can be easily integrated into various LED display devices and has significant potential in advanced display applications.
- 29 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (2) , 605-611
Boosted Ambient Contrast Ratio of Light-Emitting Diode Display Devices With High Light Output Using a Laminated Interlaced Microgroove Janus Structure
A high ambient contrast ratio (ACR) and brightness are critical for realizing high dynamic range (HDR) in advanced display applications. However, improving the ACR while maintaining high light output for display devices is still challenging. To solve this issue, we proposed a laminated interlaced microgroove (LIM) Janus structure, consisting of intersecting microgrooves cutting through the extinction and scattering layers, leading to highly improved ACR with less optical loss for display devices. Optical simulation was performed to optimize the LIM Janus structure, revealing the antireflection and light extraction mechanism with low reflectance and high light output. According to the high-speed dicing technique, the optimized LIM Janus film was prepared and assembled on light-emitting diode (LED) display devices. Compared with commercial display devices with graphite coating, the LIM display devices achieved a high ACR boosted from 2209 to 25 188 with an improvement of 1040% (ambient light 500 lux) while maintaining the high light output. The LIM Janus structure is facile and can be easily integrated into display devices to obtain excellent ACR and light output to satisfy the broad application of advanced displays.
- 29 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (2) , 605-611
Boosted Ambient Contrast Ratio of Light-Emitting Diode Display Devices With High Light Output Using a Laminated Interlaced Microgroove Janus Structure
A high ambient contrast ratio (ACR) and brightness are critical for realizing high dynamic range (HDR) in advanced display applications. However, improving the ACR while maintaining high light output for display devices is still challenging. To solve this issue, we proposed a laminated interlaced microgroove (LIM) Janus structure, consisting of intersecting microgrooves cutting through the extinction and scattering layers, leading to highly improved ACR with less optical loss for display devices. Optical simulation was performed to optimize the LIM Janus structure, revealing the antireflection and light extraction mechanism with low reflectance and high light output. According to the high-speed dicing technique, the optimized LIM Janus film was prepared and assembled on light-emitting diode (LED) display devices. Compared with commercial display devices with graphite coating, the LIM display devices achieved a high ACR boosted from 2209 to 25 188 with an improvement of 1040% (ambient light 500 lux) while maintaining the high light output. The LIM Janus structure is facile and can be easily integrated into display devices to obtain excellent ACR and light output to satisfy the broad application of advanced displays.
- 9 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (10) , 5580-5589
Enhancing Optical Performance for White Light-Emitting Diodes Using Quantum- Dots/Boron Nitride Hybrid Reflective Structure
Quantum dots (QDs) are usually used with phosphor to obtain white light-emitting diodes (WLEDs) due to their excellent lighting characteristics. For lighting effect improvement, the QDs layer and the phosphor layer are supposed to be separated to reduce reabsorption loss and enhance QDs stability. Based on the separated structure, a QDs/boron nitride hybrid reflective (QBHR) structure is proposed to enhance the optical performance of WLEDs in this study. QDs were electrostatically bonded on the boron nitride (BN) pellets and their composite particles were subsequently mixed with silicone for LED encapsulation by a spinning-coated process. It could be easily managed the performance of QBHR structure by controlling the composite particles’ concentration or centrifugal speed. The diffuse reflectance and photoluminescence (PL) intensity of QBHR structure with various thicknesses were analyzed. While applying with remote phosphor layer for WLEDs, the luminous efficacy of devices with QBHR structure increases with phosphor concentration, which are larger than that of QD/polydimethylsiloxane (QP) structures. It may be caused by the light extraction ability of the scattering BN particles and high color conversion efficiency (CCE) of QBHR structure. Finally, under the same correlated color temperature (CCT) of 3640 K, the luminous efficacy and CCE enhance by 14.2% and 19.5% using the QBHR structure, respectively. In addition, the QBHR structure shows better stability than the QP structure after aging for 387.75 h. In brief, the QBHR structure shows an effective and practical packaging method to produce high-performance WLEDs.
- 9 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (10) , 5580-5589
Enhancing Optical Performance for White Light-Emitting Diodes Using Quantum- Dots/Boron Nitride Hybrid Reflective Structure
Quantum dots (QDs) are usually used with phosphor to obtain white light-emitting diodes (WLEDs) due to their excellent lighting characteristics. For lighting effect improvement, the QDs layer and the phosphor layer are supposed to be separated to reduce reabsorption loss and enhance QDs stability. Based on the separated structure, a QDs/boron nitride hybrid reflective (QBHR) structure is proposed to enhance the optical performance of WLEDs in this study. QDs were electrostatically bonded on the boron nitride (BN) pellets and their composite particles were subsequently mixed with silicone for LED encapsulation by a spinning-coated process. It could be easily managed the performance of QBHR structure by controlling the composite particles’ concentration or centrifugal speed. The diffuse reflectance and photoluminescence (PL) intensity of QBHR structure with various thicknesses were analyzed. While applying with remote phosphor layer for WLEDs, the luminous efficacy of devices with QBHR structure increases with phosphor concentration, which are larger than that of QD/polydimethylsiloxane (QP) structures. It may be caused by the light extraction ability of the scattering BN particles and high color conversion efficiency (CCE) of QBHR structure. Finally, under the same correlated color temperature (CCT) of 3640 K, the luminous efficacy and CCE enhance by 14.2% and 19.5% using the QBHR structure, respectively. In addition, the QBHR structure shows better stability than the QP structure after aging for 387.75 h. In brief, the QBHR structure shows an effective and practical packaging method to produce high-performance WLEDs.
- 10 December 2021
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 4 (1) , 91-99
Polystyrene-Fiber-Rod Hybrid Composite Structure for Optical Enhancement in Quantum-Dot-Converted Light-Emitting Diodes
- 10 December 2021
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 4 (1) , 91-99
Polystyrene-Fiber-Rod Hybrid Composite Structure for Optical Enhancement in Quantum-Dot-Converted Light-Emitting Diodes
- Open Access
- 24 August 2021
- Published by Optica Publishing Group in Optics Express
- Vol. 29 (18) , 29007-29020
Luminous efficacy enhancement for LED lamps using highly reflective quantum dot-based photoluminescent films
In this study, a strongly reflective and photoluminescent (PL) poly(lactic-co-glycolic acid) quantum dot (QD) hybrid nanofiber (PQHN) structure is introduced to enhance the luminous efficacy of QD-phosphor hybrid white light-emitting diodes (QD-WLEDs). As the thickness of PQHN film increases, the PL is found to continuously increase, exhibiting a maximum peak intensity at 120 μm, which is 1.92 times that at 12 μm, and showing the highest diffuse reflectance of 94.4% at 640 nm. Consequently, while using the QD-WLEDs, the PQHN structure achieves a 53.8% improvement in luminous flux compared with the traditional structure under a similar correlated color temperature (CCT) of 3,540 K, achieving a high luminous efficacy of 202.11 lm W-1 for QD-WLEDs. In addition, the maximum deviation of the CCT is only 11 K when the current is changed from 50 to 950 mA, demonstrating good stability. Therefore, the PQHN films have great potential in lighting systems as a hybrid functional film including light conversion and reflectance.
- 24 August 2021
- Published by Optica Publishing Group in Optics Express
- Vol. 29 (18) , 29007-29020
Open AccessLuminous efficacy enhancement for LED lamps using highly reflective quantum dot-based photoluminescent films
In this study, a strongly reflective and photoluminescent (PL) poly(lactic-co-glycolic acid) quantum dot (QD) hybrid nanofiber (PQHN) structure is introduced to enhance the luminous efficacy of QD-phosphor hybrid white light-emitting diodes (QD-WLEDs). As the thickness of PQHN film increases, the PL is found to continuously increase, exhibiting a maximum peak intensity at 120 μm, which is 1.92 times that at 12 μm, and showing the highest diffuse reflectance of 94.4% at 640 nm. Consequently, while using the QD-WLEDs, the PQHN structure achieves a 53.8% improvement in luminous flux compared with the traditional structure under a similar correlated color temperature (CCT) of 3,540 K, achieving a high luminous efficacy of 202.11 lm W-1 for QD-WLEDs. In addition, the maximum deviation of the CCT is only 11 K when the current is changed from 50 to 950 mA, demonstrating good stability. Therefore, the PQHN films have great potential in lighting systems as a hybrid functional film including light conversion and reflectance.
- Open Access
- 18 August 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (8) , 2100
Optical Performance and Moisture Stability Enhancement of Flexible Luminescent Films Based on Quantum-Dot/Epoxy Composite Particles
Quantum dots (QDs) have been widely applied in luminescent sources due to their strong optical characteristics. However, a moisture environment causes their quenching, leading to an inferior optical performance in commercial applications. In this study, based on the high moisture resistance of epoxy resin, a novel epoxy/QDs composite particle structure was proposed to solve this issue. Flexible luminescent films could be obtained by packaging composite particles in silicone resin, combining the hydrophobicity of epoxy resin and the flexibility of PDMS simultaneously. The photoluminescence and light extraction were improved due to the scattering properties of the structure of composite particles, which was caused by the refractive index mismatch between the epoxy and silicone resin. Compared to the QD/silicone film under similar lighting conditions, the proposed flexible film demonstrated increased light efficiency as well as high moisture stability. The results revealed that a light-emitting diode (LED) device using the composite particle flexible (CPF) structure obtained a 34.2% performance enhancement in luminous efficiency as well as a 32% improvement in color conversion efficiency compared to those of devices with QD/silicone film (QSF) structure. Furthermore, the CPF structure exhibited strong thermal and moisture stability against extreme ambient conditions of 85 °C and 85% relative humidity simultaneously. The normalized luminous flux degradation of devices embedded in CPF and QSF structures after aging for 118 h were ~20.2% and ~43.8%, respectively. The satisfactory performance of the CPF structure in terms of optical and moisture stability shows its great potential value in flexible commercial QD-based LED displays and lighting applications.
- 18 August 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (8) , 2100
Open AccessOptical Performance and Moisture Stability Enhancement of Flexible Luminescent Films Based on Quantum-Dot/Epoxy Composite Particles
Quantum dots (QDs) have been widely applied in luminescent sources due to their strong optical characteristics. However, a moisture environment causes their quenching, leading to an inferior optical performance in commercial applications. In this study, based on the high moisture resistance of epoxy resin, a novel epoxy/QDs composite particle structure was proposed to solve this issue. Flexible luminescent films could be obtained by packaging composite particles in silicone resin, combining the hydrophobicity of epoxy resin and the flexibility of PDMS simultaneously. The photoluminescence and light extraction were improved due to the scattering properties of the structure of composite particles, which was caused by the refractive index mismatch between the epoxy and silicone resin. Compared to the QD/silicone film under similar lighting conditions, the proposed flexible film demonstrated increased light efficiency as well as high moisture stability. The results revealed that a light-emitting diode (LED) device using the composite particle flexible (CPF) structure obtained a 34.2% performance enhancement in luminous efficiency as well as a 32% improvement in color conversion efficiency compared to those of devices with QD/silicone film (QSF) structure. Furthermore, the CPF structure exhibited strong thermal and moisture stability against extreme ambient conditions of 85 °C and 85% relative humidity simultaneously. The normalized luminous flux degradation of devices embedded in CPF and QSF structures after aging for 118 h were ~20.2% and ~43.8%, respectively. The satisfactory performance of the CPF structure in terms of optical and moisture stability shows its great potential value in flexible commercial QD-based LED displays and lighting applications.
- 1 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 68 (2) , 584-591
Eliminating the Residual Ultraviolet Excitation Light and Increasing Quantum Dot Emission Intensity in LED Display Devices
Ultraviolet light-emitting diodes (UVLEDs) used as excitation sources for quantum dots (QDs) are promising candidates for the display field. To eliminate the residual excitation light, the conventional method is simply increasing the optical density of QDs for packaging, which would significantly reduce the luminous efficiency of QD-light-emitting diode (LED) devices owing to reabsorption loss. In this study, the combination strategy of a boron nitride (BN) reflective coating and an ultraviolet-reflection filter (UV-R filter) for QD-LED devices is proposed. By managing the recycle of UV light to excite more QDs and reducing the reabsorption effect of QDs carefully, their green emission intensity of LED using such a strategy is 82.0% higher than that of a conventional device with a similar QD light energy proportion of ~99.0% (almost no residual UV excitation light). This strategy is also effective for red QD-LED devices while eliminating residual UV excitation light and enhancing the red emission intensity. Therefore, this study provides an effective way to develop QD-LED devices with high QD emission intensity and low UV light leakage for display.
- 1 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 68 (2) , 584-591
Eliminating the Residual Ultraviolet Excitation Light and Increasing Quantum Dot Emission Intensity in LED Display Devices
Ultraviolet light-emitting diodes (UVLEDs) used as excitation sources for quantum dots (QDs) are promising candidates for the display field. To eliminate the residual excitation light, the conventional method is simply increasing the optical density of QDs for packaging, which would significantly reduce the luminous efficiency of QD-light-emitting diode (LED) devices owing to reabsorption loss. In this study, the combination strategy of a boron nitride (BN) reflective coating and an ultraviolet-reflection filter (UV-R filter) for QD-LED devices is proposed. By managing the recycle of UV light to excite more QDs and reducing the reabsorption effect of QDs carefully, their green emission intensity of LED using such a strategy is 82.0% higher than that of a conventional device with a similar QD light energy proportion of ~99.0% (almost no residual UV excitation light). This strategy is also effective for red QD-LED devices while eliminating residual UV excitation light and enhancing the red emission intensity. Therefore, this study provides an effective way to develop QD-LED devices with high QD emission intensity and low UV light leakage for display.
- 1 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Highly reflective porous films via polymerization-induced phase separation and application on phosphor-converted light-emitting diodes
We propose a highly reflective porous polymer film, fabricated by polymerization-induced phase separation (PIPS), to be integrated on the reflective cup of light-emitting diode (LED) lamps. In detail, a liquid mixture consisting of monomers of polymers, porogens and photoinitiator is used as the formulation of phase separation process. Different reflectivity is achieved by easily tuning the film thickness. With an optimized film thickness of ~55 μm, the porous polymer film features an average reflectivity of ~ 92.18% in the visible wavelength range 400-800 nm. When applied on the LED reflective cup, the porous films improve the optical efficiency of LED lamps and the angular color uniformity. The measurement results show that compared with the LED lamp without porous films, the luminous flux of the LED with porous films increases by 11.56% with the 60% weight percent of phosphor in phosphor- polydimethylsiloxane ( PDMS)layer at the current of 100 mA and the correlated color temperature deviation decreased from 34561 K to 2743 K with the 47.37% weight percent of phosphor in phosphor-PDMS layer at the current of 100 mA. Therefore, the porous polymer film made by polymerization-induced phase separation is a promising material to promote the optical performance of LED lamp.
- 1 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Highly reflective porous films via polymerization-induced phase separation and application on phosphor-converted light-emitting diodes
We propose a highly reflective porous polymer film, fabricated by polymerization-induced phase separation (PIPS), to be integrated on the reflective cup of light-emitting diode (LED) lamps. In detail, a liquid mixture consisting of monomers of polymers, porogens and photoinitiator is used as the formulation of phase separation process. Different reflectivity is achieved by easily tuning the film thickness. With an optimized film thickness of ~55 μm, the porous polymer film features an average reflectivity of ~ 92.18% in the visible wavelength range 400-800 nm. When applied on the LED reflective cup, the porous films improve the optical efficiency of LED lamps and the angular color uniformity. The measurement results show that compared with the LED lamp without porous films, the luminous flux of the LED with porous films increases by 11.56% with the 60% weight percent of phosphor in phosphor- polydimethylsiloxane ( PDMS)layer at the current of 100 mA and the correlated color temperature deviation decreased from 34561 K to 2743 K with the 47.37% weight percent of phosphor in phosphor-PDMS layer at the current of 100 mA. Therefore, the porous polymer film made by polymerization-induced phase separation is a promising material to promote the optical performance of LED lamp.