Jairo Aparecido Martins
Jairo Aparecido Martins has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Estaner Claro Romão
Department of Basic and Environmental Sciences, Lorena School of Engineering, University of São Paulo, Estrada Municipal do Campinho, 100, Lorena 12602-810, SP, Brazil
10 shared publications - Adriano Francisco Siqueira
Engineering School of Lorena, University of São Paulo
2 shared publications A.T. Silva
1 shared publication- Adam Gonçalves Zeni de Oliveira
University of São Paulo, Brazil
1 shared publication - Andreia Miranda
Experimental Pathology and Therapeutics Group, Research Center of IPO-Porto (CI-IPOP)/RISE@CI-IPOP (Health Research Network), Portuguese Oncology Institute of Porto (IPO-Porto)/Porto Comprehensive Cancer Center Raquel Seruca (Porto.CCC Raquel Seruca), Porto, Portugal
1 shared publication - Andréa Goulart Mendes Carruba
University of São Paulo, Brazil
1 shared publication
Latest Publications
- Open Access
- 12 June 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (12) , 5981
Multiphysics Modeling and Sensitivity Analysis of Ethanol Steam Reforming in Porous Catalytic Media for Hydrogen Production
This work presents a case study of sensitivity analysis applied to the modeling of ethanol steam reforming (SRE) in a catalytic porous medium, with a focus on hydrogen production. Considering the high variability of parameters reported in the literature, the objective is not to propose a universal model, but rather to assess the impact of uncertainties associated with input parameters on the model outcomes. The model was developed under steady-state conditions, coupling flow in porous media, species transport, and heat transfer, with kinetics described as a function of partial pressures. The sensitivity analysis was conducted through the systematic variation of kinetic and physicochemical parameters within ranges associated with their uncertainties. The results indicate that activation energy is the parameter most sensitive to uncertainty variation, exhibiting the greatest impact on hydrogen production. The thermal properties of the medium, particularly thermal conductivity and solid density, also stand out, highlighting the role of thermo-kinetic coupling. In contrast, parameters such as porosity, water reaction order, and particle diameter exhibited low sensitivity under the analyzed conditions. As a main contribution, this work establishes a sensitivity hierarchy associated with parameter uncertainties and provides guidance for other researchers regarding the prioritization of their determination and calibration in hydrogen production models.
- 12 June 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (12) , 5981
Open AccessMultiphysics Modeling and Sensitivity Analysis of Ethanol Steam Reforming in Porous Catalytic Media for Hydrogen Production
This work presents a case study of sensitivity analysis applied to the modeling of ethanol steam reforming (SRE) in a catalytic porous medium, with a focus on hydrogen production. Considering the high variability of parameters reported in the literature, the objective is not to propose a universal model, but rather to assess the impact of uncertainties associated with input parameters on the model outcomes. The model was developed under steady-state conditions, coupling flow in porous media, species transport, and heat transfer, with kinetics described as a function of partial pressures. The sensitivity analysis was conducted through the systematic variation of kinetic and physicochemical parameters within ranges associated with their uncertainties. The results indicate that activation energy is the parameter most sensitive to uncertainty variation, exhibiting the greatest impact on hydrogen production. The thermal properties of the medium, particularly thermal conductivity and solid density, also stand out, highlighting the role of thermo-kinetic coupling. In contrast, parameters such as porosity, water reaction order, and particle diameter exhibited low sensitivity under the analyzed conditions. As a main contribution, this work establishes a sensitivity hierarchy associated with parameter uncertainties and provides guidance for other researchers regarding the prioritization of their determination and calibration in hydrogen production models.
- Open Access
Catastrophic Failure Analysis of a Wind Turbine Gearbox by the Finite Element Method and Fracture Analysis
The wind turbine gearbox, used as a multiplier, is one of the main components directly related to a wind turbine’s efficiency and lifespan. Therefore, strict control of the gearbox and its manufacturing processes and even minor improvements in this component strongly and positively impact energy production/generation over time. Since only some papers in the literature analyze the mechanical aspect of wind turbines, focusing on some parts in depth, this paper fills the gap by offering an analysis of the gearbox component under the highest amount of stress, namely relating to the sun shaft, as well as a more holistic analysis of the main gear drives, its components, and the lubrification system. Thus, this work diagnoses the fracture mechanics of a 1600 kW gearbox to identify the main reason for the fracture and how the chain of events took place, leading to catastrophic failure. The diagnoses involved numerical simulation (finite element analysis—FEA) and further analysis of the lubrication system, bearings, planetary stage gears, helical stage gears, and the high-speed shaft. In conclusion, although the numerical simulation showed high contact stresses on the sun shaft teeth, the region with the unexpectedly nucleated crack was the tip of the tooth. The most likely factors that led to premature failure were the missed lubrication for the planetary bearings, a lack of cleanliness in regard to the raw materials of the gears (voids found), and problems with the sun shaft heat treatment. With the sun gear’s shaft, planet bearings, and planet gears broken into pieces, those small and large pieces dropped into the oil, between the gears, and into the tooth ring, causing the premature and catastrophic gearbox failure.
Open AccessCatastrophic Failure Analysis of a Wind Turbine Gearbox by the Finite Element Method and Fracture Analysis
The wind turbine gearbox, used as a multiplier, is one of the main components directly related to a wind turbine’s efficiency and lifespan. Therefore, strict control of the gearbox and its manufacturing processes and even minor improvements in this component strongly and positively impact energy production/generation over time. Since only some papers in the literature analyze the mechanical aspect of wind turbines, focusing on some parts in depth, this paper fills the gap by offering an analysis of the gearbox component under the highest amount of stress, namely relating to the sun shaft, as well as a more holistic analysis of the main gear drives, its components, and the lubrification system. Thus, this work diagnoses the fracture mechanics of a 1600 kW gearbox to identify the main reason for the fracture and how the chain of events took place, leading to catastrophic failure. The diagnoses involved numerical simulation (finite element analysis—FEA) and further analysis of the lubrication system, bearings, planetary stage gears, helical stage gears, and the high-speed shaft. In conclusion, although the numerical simulation showed high contact stresses on the sun shaft teeth, the region with the unexpectedly nucleated crack was the tip of the tooth. The most likely factors that led to premature failure were the missed lubrication for the planetary bearings, a lack of cleanliness in regard to the raw materials of the gears (voids found), and problems with the sun shaft heat treatment. With the sun gear’s shaft, planet bearings, and planet gears broken into pieces, those small and large pieces dropped into the oil, between the gears, and into the tooth ring, causing the premature and catastrophic gearbox failure.
- Open Access
- 27 September 2024
- Published by MDPI AG in Preprints.org
Catastrophic Failure Analysis of a Wind Turbine Gearbox by Finite Element Method and Fracture Analysis
Wind energy is one of the main drivers of the renewable energy market. The wind turbine gearbox, used as a multiplier - is one of the main components directly related to wind turbine efficiency and lifespan. Therefore, the strict control of the gearbox project and its manufacturing processes or even minor improvements in this component heavily and positively impact energy production/generation over time. This work diagnoses a 1.6 MW gearbox fracture mechanics to identify its main reason and how the chain of events took place, leading to the catastrophic failure. The diagnoses underwent numerical simulation (Finite Element Analysis - FEA) and further analysis of the lubrication system, bearings, planetary stage gears, helical stage gears, and high-speed shaft. In conclusion, although the numerical simulation showed high contact stresses between the teeth, the region with the crack nucleated was the top land (tip of the tooth). The most likely factors that led to the premature failure were the missed lubrication for the planetary bearings, lack of gear raw material cleanliness, and excessive case depth at the tip of the sun shaft gear teeth. With the sun gear, planet bearings, and planet gears broken in pieces, those small and large pieces dropped into the oil, between the gears, and into the tooth ring, ending up as a premature gearbox failure.
- 27 September 2024
- Published by MDPI AG in Preprints.org
Open AccessCatastrophic Failure Analysis of a Wind Turbine Gearbox by Finite Element Method and Fracture Analysis
Wind energy is one of the main drivers of the renewable energy market. The wind turbine gearbox, used as a multiplier - is one of the main components directly related to wind turbine efficiency and lifespan. Therefore, the strict control of the gearbox project and its manufacturing processes or even minor improvements in this component heavily and positively impact energy production/generation over time. This work diagnoses a 1.6 MW gearbox fracture mechanics to identify its main reason and how the chain of events took place, leading to the catastrophic failure. The diagnoses underwent numerical simulation (Finite Element Analysis - FEA) and further analysis of the lubrication system, bearings, planetary stage gears, helical stage gears, and high-speed shaft. In conclusion, although the numerical simulation showed high contact stresses between the teeth, the region with the crack nucleated was the top land (tip of the tooth). The most likely factors that led to the premature failure were the missed lubrication for the planetary bearings, lack of gear raw material cleanliness, and excessive case depth at the tip of the sun shaft gear teeth. With the sun gear, planet bearings, and planet gears broken in pieces, those small and large pieces dropped into the oil, between the gears, and into the tooth ring, ending up as a premature gearbox failure.
- Open Access
- 8 February 2024
- Published by Engineering, Technology & Applied Science Research in Engineering, Technology & Applied Science Research
- Vol. 14 (1) , 12640-12645
Fracture Analysis of a Cycloidal Gearbox as a Yaw Drive on a Wind Turbine
Fast growth of renewable energies has required addressing challenges such as generating the largest energy production possible throughout the equipment's lifespan and between its preventive and corrective maintenance intervals. Actions such as preventive maintenance, and improvement of the main components, mainly when it comes to reliability and predictability are of extreme importance to reach maximum generation. Due to the importance of the yaw drives for wind turbines, this paper aims to evaluate a failure that occurred on a cycloidal gearbox used in a drive of this kind. For the evaluation of the yaw drive, all the components were analyzed to determine the incurred fracture mechanism. Such analysis was performed by mapping all components, conducting a hardness test to check the components' mechanical properties, analysis of the fractured surfaces of the cycloidal disc, and numerical simulation (linear elastic) via the Finite Element Method (FEM) to check the stress distribution on the fractured part (cycloidal disc) under load, and theoretical calculation of the cycloidal disc lifespan. In addition, the stress distribution by FEM was compared with the broken regions of the physical part. To sum up, after all the evaluations, it is possible to claim the results demonstrate there was a premature fracture of the cycloidal disc that occurred due to the phenomenon of high cycle fatigue.
- 8 February 2024
- Published by Engineering, Technology & Applied Science Research in Engineering, Technology & Applied Science Research
- Vol. 14 (1) , 12640-12645
Open AccessFracture Analysis of a Cycloidal Gearbox as a Yaw Drive on a Wind Turbine
Fast growth of renewable energies has required addressing challenges such as generating the largest energy production possible throughout the equipment's lifespan and between its preventive and corrective maintenance intervals. Actions such as preventive maintenance, and improvement of the main components, mainly when it comes to reliability and predictability are of extreme importance to reach maximum generation. Due to the importance of the yaw drives for wind turbines, this paper aims to evaluate a failure that occurred on a cycloidal gearbox used in a drive of this kind. For the evaluation of the yaw drive, all the components were analyzed to determine the incurred fracture mechanism. Such analysis was performed by mapping all components, conducting a hardness test to check the components' mechanical properties, analysis of the fractured surfaces of the cycloidal disc, and numerical simulation (linear elastic) via the Finite Element Method (FEM) to check the stress distribution on the fractured part (cycloidal disc) under load, and theoretical calculation of the cycloidal disc lifespan. In addition, the stress distribution by FEM was compared with the broken regions of the physical part. To sum up, after all the evaluations, it is possible to claim the results demonstrate there was a premature fracture of the cycloidal disc that occurred due to the phenomenon of high cycle fatigue.
- Open Access
- 3 July 2023
- Published by MDPI AG in Preprints.org
A Qualitative Novel Technology to Design an Efficiency Thermal Distribution in a House: A Case Study
The study of energy sources has been an awareness of the modern world due to constraints on the current energy worldwide supply chain. The complexity of the theme as well as the consciousness of finite sources also the need of saving energy has become a priority. Although many papers have moved in this direction there is no record of papers studying the variables in a house heating system, which represents the highest energy consumption in many cold countries. This paper explores the energy-saving theme by studying the main variables present in houses’ heating systems in the winter season in cold countries like Canada, Russia, Norway, Iceland, Finland, etc. By using a novel combination of numerical thermal simulation by COMSOLTM and statistical analysis by MiniTabTM , it was possible to design an efficient thermal distribution in a house with the variables of the system by determining their significance and interaction qualitatively.
- 3 July 2023
- Published by MDPI AG in Preprints.org
Open AccessA Qualitative Novel Technology to Design an Efficiency Thermal Distribution in a House: A Case Study
The study of energy sources has been an awareness of the modern world due to constraints on the current energy worldwide supply chain. The complexity of the theme as well as the consciousness of finite sources also the need of saving energy has become a priority. Although many papers have moved in this direction there is no record of papers studying the variables in a house heating system, which represents the highest energy consumption in many cold countries. This paper explores the energy-saving theme by studying the main variables present in houses’ heating systems in the winter season in cold countries like Canada, Russia, Norway, Iceland, Finland, etc. By using a novel combination of numerical thermal simulation by COMSOLTM and statistical analysis by MiniTabTM , it was possible to design an efficient thermal distribution in a house with the variables of the system by determining their significance and interaction qualitatively.
- Open Access
- 2 April 2023
- Published by Engineering, Technology & Applied Science Research in Engineering, Technology & Applied Science Research
- Vol. 13 (2) , 10255-10260
Numerical Simulation and Optimization of Methane Steam Reforming to Maximize H2 Production: A Case Study
Research in renewable energy, the preservation of the environment, and the reduction of energy generation costs are themes that go hand in hand. In this work, a case study was carried out that aims to maximize the production of hydrogen through Methane Steam Reforming. For this, several numerical simulations, considering a laminar flow regime in a chemical reactor with a catalyst, were developed with COMSOL Multiphysics. After an exploratory study of the data, a systematic optimization was developed using multivariate regression models formed by combinations of input parameters in an idealized reactor. The results showed that the proposed approach is capable of satisfactory optimization.
- 2 April 2023
- Published by Engineering, Technology & Applied Science Research in Engineering, Technology & Applied Science Research
- Vol. 13 (2) , 10255-10260
Open AccessNumerical Simulation and Optimization of Methane Steam Reforming to Maximize H2 Production: A Case Study
Research in renewable energy, the preservation of the environment, and the reduction of energy generation costs are themes that go hand in hand. In this work, a case study was carried out that aims to maximize the production of hydrogen through Methane Steam Reforming. For this, several numerical simulations, considering a laminar flow regime in a chemical reactor with a catalyst, were developed with COMSOL Multiphysics. After an exploratory study of the data, a systematic optimization was developed using multivariate regression models formed by combinations of input parameters in an idealized reactor. The results showed that the proposed approach is capable of satisfactory optimization.
- Open Access
- 6 June 2022
- Published by Engineering, Technology & Applied Science Research in Engineering, Technology & Applied Science Research
- Vol. 12 (3) , 8755-8759
Utilizing Numerical Simulations to Analyze the Efficiency of a Porous Reactor
This paper presents a series of numerical simulations of a porous reactor, where a generic reaction between reagents is carried out, generating a product. All numerical simulations were performed by using the software COMSOL Multiphysics, which made use of the Navier-Stokes and Brinkman equations. These equations were utilized to govern the fluid flow in the numerical simulation. Throughout the simulations, several initial parameters were altered to evaluate their impact on the reactor efficiency based on the concentration of component C. Furthermore, other parameters such as the distribution of speed and geometry in the equipment were taken into consideration, and an optimal configuration for the case is demonstrated.
- 6 June 2022
- Published by Engineering, Technology & Applied Science Research in Engineering, Technology & Applied Science Research
- Vol. 12 (3) , 8755-8759
Open AccessUtilizing Numerical Simulations to Analyze the Efficiency of a Porous Reactor
This paper presents a series of numerical simulations of a porous reactor, where a generic reaction between reagents is carried out, generating a product. All numerical simulations were performed by using the software COMSOL Multiphysics, which made use of the Navier-Stokes and Brinkman equations. These equations were utilized to govern the fluid flow in the numerical simulation. Throughout the simulations, several initial parameters were altered to evaluate their impact on the reactor efficiency based on the concentration of component C. Furthermore, other parameters such as the distribution of speed and geometry in the equipment were taken into consideration, and an optimal configuration for the case is demonstrated.
- Open Access
- 10 June 2021
- Published by European Open Science in European Journal of Education and Pedagogy
- Vol. 2 (3) , 67-72
Educommunication, Geography and Virtual Games: A Proposal to Encourage Scientific Literacy in Middle School
This research describes a development process of an educommunicational project and its presentation by 7th year’s students of Middle School. Student’s part of this research was from a private school in a city part of Sao Paulo’s State. In fact, it aimed to verify possible contributions obtained by using a specific didactic sequence linked with Geography teaching. Thereunto, virtual games and educommunication tools were used to promote literacy and scientific dissemination through Digital Information Technologies and Communication. In terms of method utilized, a qualitative-descriptive method was used since it applied observation, analysis, and data comparison to obtain results. In addition, the methodology helped to solve problems throughout the project phase until it reached its final presentation. As a final result of this project, it was observed that students could develop not only active learning but also creative learning throughout the process. As assistance, students had teacher acting as a mediator in order to constantly guide and manage them in their activities. To sum up, documentary videos presented by students, combined with games and digital educational technologies are considered relevant forms of communication as well as effective learning resources because they favor a development of critical-scientific thinking. As a matter of fact, it is applicable when carrying out researches, experiencing challenges also building knowledge throughout student’s own experience processes.
- 10 June 2021
- Published by European Open Science in European Journal of Education and Pedagogy
- Vol. 2 (3) , 67-72
Open AccessEducommunication, Geography and Virtual Games: A Proposal to Encourage Scientific Literacy in Middle School
This research describes a development process of an educommunicational project and its presentation by 7th year’s students of Middle School. Student’s part of this research was from a private school in a city part of Sao Paulo’s State. In fact, it aimed to verify possible contributions obtained by using a specific didactic sequence linked with Geography teaching. Thereunto, virtual games and educommunication tools were used to promote literacy and scientific dissemination through Digital Information Technologies and Communication. In terms of method utilized, a qualitative-descriptive method was used since it applied observation, analysis, and data comparison to obtain results. In addition, the methodology helped to solve problems throughout the project phase until it reached its final presentation. As a final result of this project, it was observed that students could develop not only active learning but also creative learning throughout the process. As assistance, students had teacher acting as a mediator in order to constantly guide and manage them in their activities. To sum up, documentary videos presented by students, combined with games and digital educational technologies are considered relevant forms of communication as well as effective learning resources because they favor a development of critical-scientific thinking. As a matter of fact, it is applicable when carrying out researches, experiencing challenges also building knowledge throughout student’s own experience processes.
- Open Access
- 15 May 2020
- Published by Instituto Federal de Educacao, Ciencia e Tecnologia do Rio Grande do Norte (IFRN) in HOLOS
- Vol. 3 (3) , 1-7
Difference of the Plastic Stress and Residual by Holloman and Hooke equation for two different steels
This paper presents the applied stress, the residual stress and difference between them for two different materials, calculated by the combination of Hooke´s Law and Holloman Law. In order to calculate the stresses two different materials were chosen, the first is an alloyed steel SAE 4340 and the second a high strength steel UHB-20C. The results showed that both materials showed the same trend, which means the difference between the applied stress and the residual stress is minimal when applied stress is closer to material tensile strength. On contrary, when the applied stress is closer to the materials yield strength the difference is significantly higher.
- 15 May 2020
- Published by Instituto Federal de Educacao, Ciencia e Tecnologia do Rio Grande do Norte (IFRN) in HOLOS
- Vol. 3 (3) , 1-7
Open AccessDifference of the Plastic Stress and Residual by Holloman and Hooke equation for two different steels
This paper presents the applied stress, the residual stress and difference between them for two different materials, calculated by the combination of Hooke´s Law and Holloman Law. In order to calculate the stresses two different materials were chosen, the first is an alloyed steel SAE 4340 and the second a high strength steel UHB-20C. The results showed that both materials showed the same trend, which means the difference between the applied stress and the residual stress is minimal when applied stress is closer to material tensile strength. On contrary, when the applied stress is closer to the materials yield strength the difference is significantly higher.