Arun Kumar Singh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Arun Kumar Singh has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
Anubha Sodhiya
Department of Physics, Dr. Harisingh Gour Vishwavidyalaya, Sagar, India
3 shared publications- Ashish Verma
Department of Physics, Dr. Harisingh Gour Vishwavidyalaya, Sagar, India
3 shared publications Ashish Verma
Department of Physics, Dr. Harisingh. Gour Vishwavidyalaya, Sagar, India
2 shared publicationsNiharika Chourasiya
Department of Physics, Dr. Harisingh Gour Vishwavidyalaya, Sagar, India
2 shared publications- Akshkumar Verma
School of Studies in Physics and Astrophysics, Pt. Ravishankar University, Raipur, India
1 shared publication D. P. Bisen
School of Studies in Physics and Astrophysics, Pt. Ravishankar Shukla University, Raipur, India
1 shared publication
Latest Publications
- 20 May 2023
- Published by Springer Nature in Journal of the Iranian Chemical Society
- Vol. 20 (8) , 2079-2087
A study on the supercapacitive behaviour of SNrGO/PEDOT:PSS composite as an electrode for electrochemical supercapacitors
- 20 May 2023
- Published by Springer Nature in Journal of the Iranian Chemical Society
- Vol. 20 (8) , 2079-2087
A study on the supercapacitive behaviour of SNrGO/PEDOT:PSS composite as an electrode for electrochemical supercapacitors
- Open Access
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2800 (1)
Structural, optical, morphological and photoluminescence properties of Dy doped Sr1-xAl2O4 : xDy (x = 0.05) phosphor by using urea fuel combustion method
In the present study the Dy3+ doped Sr1-xAl2O4: xDy (x= 0.05) phosphor (SAD 0.05 phosphor) was synthesized with Sr(NO3)2 and Al(NO3).H2O as precursors utilizing the urea fuel combustion method at 610 °C temperature. After a structural study employing X-ray diffraction, the sample was found to be single phased in nature and to have crystallized into monoclinic phase match with standard JCPDS 34-0379 card. The optical band gap obtained for Dy3+ doped Sr1-xAl2O4: xDy (x= 0.05) phosphor (SAD 0.05 phosphor) is 2.6460 eV in the current scenario, showing that the sample is a wide band gap material. The majority of the particles appear to be irregular spherical grains with a mean size of 19–41 nm, according to transmission electron microscopy (TEM). The photoluminescence study revealed the three emission peaks in emission spectra with 572nm as dominant emission peak, by using 350nm as excitation wavelength. The CIE chromaticity diagram is used to calculate colour temperature 10475K and colour purity 21.95% of sample, the Dy3+ doped Sr1-xAl2O4: xDy (x= 0.05) phosphor (SAD 0.05 phosphor) can be tuned as light blue (0.28, 0.28) emission. The spectra are intense and lie in visible range.
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2800 (1)
Open AccessStructural, optical, morphological and photoluminescence properties of Dy doped Sr1-xAl2O4 : xDy (x = 0.05) phosphor by using urea fuel combustion method
In the present study the Dy3+ doped Sr1-xAl2O4: xDy (x= 0.05) phosphor (SAD 0.05 phosphor) was synthesized with Sr(NO3)2 and Al(NO3).H2O as precursors utilizing the urea fuel combustion method at 610 °C temperature. After a structural study employing X-ray diffraction, the sample was found to be single phased in nature and to have crystallized into monoclinic phase match with standard JCPDS 34-0379 card. The optical band gap obtained for Dy3+ doped Sr1-xAl2O4: xDy (x= 0.05) phosphor (SAD 0.05 phosphor) is 2.6460 eV in the current scenario, showing that the sample is a wide band gap material. The majority of the particles appear to be irregular spherical grains with a mean size of 19–41 nm, according to transmission electron microscopy (TEM). The photoluminescence study revealed the three emission peaks in emission spectra with 572nm as dominant emission peak, by using 350nm as excitation wavelength. The CIE chromaticity diagram is used to calculate colour temperature 10475K and colour purity 21.95% of sample, the Dy3+ doped Sr1-xAl2O4: xDy (x= 0.05) phosphor (SAD 0.05 phosphor) can be tuned as light blue (0.28, 0.28) emission. The spectra are intense and lie in visible range.
- 28 June 2022
- Published by Springer Nature in MRS Advances
- Vol. 7 (30) , 746-750
Graphite to graphene conversion via modified electrochemical exfoliation method
- 28 June 2022
- Published by Springer Nature in MRS Advances
- Vol. 7 (30) , 746-750
Graphite to graphene conversion via modified electrochemical exfoliation method
- Retracted
- 7 June 2022
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 33 (19) , 15858-15878
RETRACTED ARTICLE: Investigation of structural, luminescence, and anti-bacterial properties of novel Zn1−xEuxAl2−yO4Sry phosphor
- 7 June 2022
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 33 (19) , 15858-15878
RetractedRETRACTED ARTICLE: Investigation of structural, luminescence, and anti-bacterial properties of novel Zn1−xEuxAl2−yO4Sry phosphor
- 16 August 2021
- Published by Taylor & Francis in Fullerenes, Nanotubes and Carbon Nanostructures
- Vol. 30 (5) , 525-533
The effect of synthesis temperature on the structural and electrochemical properties of S and N doped rGO electrodes
As the demand for alternative energy sources grows, new electrode materials for electrochemical supercapacitors are being developed. Heteroatom doped rGO sheets have attracted much attention in recent time. S and N doped rGO was prepared at various temperatures by a simple and low cost hydrothermal method in the present work. The successful formation of S and N doped rGO sheets is confirmed by structural characterization of prepared samples. The EDX and BET surface analysis shows the optimum doping of S and N and the highest surface area in SNrGO-140 sample, respectively. The electrochemical profile study shows that the SNrGO-140 has the maximum specific capacitance value of 332.5 F/g at a scan rate of 10 mV/s. The result observed suggested that S and N doped rGO prepared at 140 °C is the suitable electrode material to be used in high energy electrochemical supercapacitors.
- 16 August 2021
- Published by Taylor & Francis in Fullerenes, Nanotubes and Carbon Nanostructures
- Vol. 30 (5) , 525-533
The effect of synthesis temperature on the structural and electrochemical properties of S and N doped rGO electrodes
As the demand for alternative energy sources grows, new electrode materials for electrochemical supercapacitors are being developed. Heteroatom doped rGO sheets have attracted much attention in recent time. S and N doped rGO was prepared at various temperatures by a simple and low cost hydrothermal method in the present work. The successful formation of S and N doped rGO sheets is confirmed by structural characterization of prepared samples. The EDX and BET surface analysis shows the optimum doping of S and N and the highest surface area in SNrGO-140 sample, respectively. The electrochemical profile study shows that the SNrGO-140 has the maximum specific capacitance value of 332.5 F/g at a scan rate of 10 mV/s. The result observed suggested that S and N doped rGO prepared at 140 °C is the suitable electrode material to be used in high energy electrochemical supercapacitors.