NCNa-Young Chang

Na-Young Chang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Na-Young Chang has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Impact of orthodontic forced eruption timing on root development of impacted maxillary canines: a linear and volumetric analysis using cone-beam computed tomography images

    by Ye-Hyun Lee, Na-Young Chang, Jong-Moon Chae

    Objectives: To evaluate root development after forced eruption of impacted maxillary canines before or after complete root development of the contralateral canine. Materials and Methods: A total of 50 patients (21 male, 29 female; mean age: 12.4 years) with unilateral impaction of maxillary canines were classified to “Immature group” with incomplete root development of the contralateral canine or “Mature group” with complete root development of the contralateral canine. Volume, total length, crown length, root length, and root/crown ratio (R/C) of the impacted canine and the contralateral canine were measured in the posttreatment cone-beam computed tomography images. Results: In the immature group, total length and root length of impacted canines were 0.68 mm and 0.51 mm shorter than contralateral canines, respectively ( P < .05). In the mature group, volume, total length, root length, and R/C of impacted canines were 37.90 mm 3 , 2.43 mm, 2.53 mm, and 0.26 smaller, respectively, than contralateral canines ( P < .001). Crown length also showed a statistically significant difference between impacted canines and contralateral canines ( P < .05). When differences between impacted canines and contralateral canines were compared between the immature and mature groups, all variables showed statistically significant differences, with the mean difference in total length and root length being 1.75 mm and 2.02 mm larger, respectively, in the mature group, ( P < .001). Conclusions: Regardless of treatment timing, total length and root length of impacted canines were shorter than those of contralateral canines. Forced eruption of the impacted canine undertaken before root development of the contralateral canine showed better root development in both linear and volumetric measurements.

  • Open Access

    Tooth Movement Patterns Based on Traction Methods for Mandibular Canine Retraction Using Skeletal Anchorage: A Finite Element Analysis

    by Dong-Hwan Lee, Jong-Moon Chae, Jae Hyun Park, Na-Young Chang, Kyung-Hwa Kang, Sung-Kwon Choi

    Objective: This study compared the tooth movement patterns of a power arm and a lever jig during mandibular canine retraction into a premolar extraction space using skeletal anchorage. Methods: A finite element model was developed based on anatomical structures. A mini-implant was placed between the mandibular second premolar and first molar, and canine retraction was simulated using a power arm and a lever jig. The lever jig’s vertical arm lengths were 6 mm, 8 mm, and 10 mm, corresponding to force application distances of 4.5 mm, 6.4 mm, and 8.2 mm from the archwire, matching the power arm. Finite element analysis was performed using linear mechanical properties and an explicit method. Results: With the power arm, increasing vertical length led to greater extrusion, while the posterior force remained unchanged. The lever jig also showed increased extrusion with length but to a lesser extent. Posterior force increased proportionally with the lever jig length. Initial displacement analysis showed greater extrusion and distal tipping with the power arm, while the lever jig suppressed extrusion and facilitated controlled tipping. Stress analysis revealed a more uniform periodontal ligament stress distribution with the lever jig. Conclusion: The lever jig minimizes extrusion and enhances force concentration posteriorly, promoting efficient distal movement.

  • Open Access

    Non-Surgical Camouflage Treatment of a Skeletal Class III Patient with Anterior Open Bite and Asymmetry Using Orthodontic Miniscrews and Intermaxillary Elastics

    by Ye-Ji Seo, Jae Hyun Park, Na-Young Chang, Jong-Moon Chae

    This case report presents the non-surgical orthodontic camouflage treatment of an 18-year-old male patient with skeletal Class III asymmetry and severe anterior open bite. The anterior open bite was corrected by extrusion of the maxillary and mandibular anterior teeth and clockwise and counterclockwise rotation of the maxillary and mandibular occlusal plane, respectively, using intermaxillary Class III elastics between the maxillary posterior buccal miniscrews and mandibular canines and anterior vertical elastics between the maxillary and mandibular canines. Class III dental relationships and dental asymmetry were corrected via unilateral distalization of the mandibular dentition on the left side using a closed coil spring between the buccal shelf screw and hook. The patient’s smile esthetics and dental relationship were improved with a more favorable facial profile, and facial asymmetry was slightly alleviated after orthodontic camouflage treatment. The total treatment time was 15 months. A modified wraparound retainer with a scalloped labial bow, tongue crib, and tooth positioner was used simultaneously to prevent the potential relapse.


  • Open Access

    A CBCT Evaluation of the Proximity of Mandibular Molar Roots and Lingual Cortical Bone in Various Vertical Facial Patterns and Factors Related to Root-Cortical Bone Contact

    by Sung-Kwon Choi, Jae Hyun Park, Jong-Moon Chae, Na-Young Chang, Kyung-Hwa Kang

    The objective of this study was to assess the proximity of the mandibular molar roots and the lingual cortical bone in patients with various vertical facial patterns and determine factors related to root-cortical bone contact. A total of 145 patients (84 males, 61 females, mean age: 22.0 ± 1.76 years) were assigned to hypodivergent (36 patients), normovergent (80 patients) and hyperdivergent (29 patients) groups based on their facial height ratio. Cone-beam computed tomography (CBCT) images were used to measure the distance between the mandibular molar roots and the lingual cortical bone, and any instances of root-cortical bone contact were identified. The study investigated the correlation between the contact of the mandibular molar roots with the lingual cortical bone and several variables, including sex and cephalometric measurements. The distance between the mandibular molar roots and the lingual cortical bone was significantly shorter in the hyperdivergent group than in the hypodivergent group (p < 0.05). Of the total root-cortical bone contact, 87.6% was observed in the mandibular second molars, and the distal roots of the mandibular second molars had the highest contact rate at 43.1% in the hyperdivergent group (p < 0.05). Among the evaluated variables, only the distance between the distal root apex of the mandibular second molar and the mandibular plane was found to be associated with contact of the mandibular molar roots with the lingual cortical bone. An increase of 1 mm in this distance was associated with a 22% decrease in the likelihood of contact between the mandibular second molar roots and lingual cortical bone (p < 0.001). Given the proximity and high contact ratio between the mandibular molar roots and lingual cortical bone, it is recommended that these structures be evaluated using CBCT before planning molar distalization or intrusion in hyperdivergent patients.


  • Open Access

    Effects of Mini-Implant-Assisted Rapid Palatal Expansion on Incisive Canal Morphology and Tooth–Canal Relationship

    by Sung-Kwon Choi, Yu-Rim Kim, Jae Hyun Park, Kyung-Hwa Kang, Na-Young Chang, Jong-Moon Chae

    The objective of this study was to identify the change in incisive canal (IC) morphology and tooth–canal relationship after mini-implant-assisted rapid palatal expansion (MARPE). Pretreatment and posttreatment cone-beam computed tomography images of 30 subjects were retrospectively evaluated. The dimensional and volume changes of the IC after MARPE treatment were evaluated, and the tooth–canal relationship and positional relationship between the maxillary central incisors were additionally compared in the group where the root apex of the maxillary central incisors was higher than the IC oral opening. The mediolateral and labiopalatal widths of the IC were significantly increased in all three levels after MARPE treatment (p < 0.01). The amount of increase was greater in the mediolateral direction than in the labiopalatal direction. The anteroposterior distance from the mesial point of the maxillary central incisors to the anterior margin of the IC was significantly decreased only in the oral opening level in the samples where the apices of the maxillary central incisors were located more superior to the oral opening of the IC (p < 0.05). The mediolateral distance between the mesial points of the maxillary central incisors and the distance between the root apex of the maxillary central incisors significantly increased after MARPE (p < 0.001). However, the distance between the crown tips of the maxillary central incisors did not significantly increase, even after MARPE treatment (p > 0.05). The volume of the IC significantly increased after MARPE treatment (p < 0.001), and the average increase in the total volume of the IC was about 65%. MARPE increased the width and volume of the IC and did not result in a clinically significant change in the root–canal relationship.


  • Open Access

    A CBCT Evaluation of Nasal Septal Deviation and Related Nasofacial Structures after Maxillary Skeletal Expansion

    by Hye-Jeong Lee, Jae Hyun Park, Hye Young Seo, Sung-Kwon Choi, Na-Young Chang, Kyung-Hwa Kang, Jong-Moon Chae

    Background: The aim of this study was to evaluate three-dimensional (3D) changes in nasal septal deviation (NSD) and related nasofacial structures after maxillary skeletal expansion (MSE). Methods: This retrospective study evaluated 28 patients aged 12.0–48.4 years (mean age, 20.4 ± 7.3 years; 12 males, 16 females) diagnosed with transverse maxillary deficiency and treated with MSE. Cone-beam computed tomography (CBCT) images were taken at pre-expansion (T1), post-expansion (T2), and 6-months after MSE (T3) and were reoriented. Three-dimensional coordinates (x,y,z) were constructed using nasion (N) as the reference point (0,0,0). A paired-sample t-test and an independent sample t-test were performed to investigate and compare the 3D changes of the NSD and nasofacial structures after MSE, depending on the direction and amount of NSD and the amount of midpalatal expansion (MPE). Results: NSD was alleviated at T3–T1 in the coronal plane; nasal septal length increased significantly. The absolute nasal floor (NF) angle (2.06° at T1) decreased at T2–T1 (p > 0.05) and increased at T3–T2 (p < 0.05). The midface moved forward and downward, and pogonion (Pog) and menton (Me) moved downward and backward. There were no significant differences between the higher and lower NSD groups and greater and lesser MPE groups. Conclusions: Consequently, NSD was alleviated with variable positive nasofacial changes after MSE in both the short and long term. Therefore, MSE can be used to improve or camouflage facial deformities.


  • Orthodontic space management in first molar missing or unusual extraction patients

    by Jae Hyun Park, Mi-Young Lee, Na-Young Chang, Sung-Kwon Choi, Kyung-Hwa Kang, Jong-Moon Chae


  • Open Access

    Non-extraction camouflage treatment using extra-alveolar skeletal anchorage

    by Young-Jun Lee, Jae Hyun Park, Na-Young Chang, Kang-Gyu Lee, Jong-Moon Chae

    A 23-year-old female patient with moderate crowding and a bilateral molar scissor-bite was successfully treated without tooth extraction. Extra-alveolar skeletal anchorage, involving a three-dimensional key plate in the maxilla and two miniscrews in the buccal shelf of the mandible, were used for distalisation, buccolingual uprighting, and the intrusion of molars by fixed orthodontic appliances. Cone-beam computed tomography was used to identify available posterior space for the distalisation and buccolingual correction of the molars in scissor-bite. The total treatment time was 24 months. Post-treatment results showed good occlusal relationships and smile aesthetics. Twelve-month post-treatment records demonstrated no significant relapse and a favourable facial balance.

  • Open Access

    Interlabial gap and freeway space at rest position: a cephalometric study

    by Ye-Ji Seo, Jae Hyun Park, Na-Young Chang, Hye Young Seo, Jong-Moon Chae

    Objectives: The aim of this prospective study was to assess the amount of interlabial gap (ILG) and freeway space (FWS) at rest position (RP) according to gender, age, and skeletal pattern, and to evaluate the cephalometric measurements at maximum intercuspal position (MIP) and at RP to define the cephalometric changes from MIP to RP related to the amount of ILG and FWS. Methods: Lateral cephalograms and photographs of selected subjects (47 females, 57 males) were obtained at MIP and RP. Cephalometric measurements at MIP and RP and their differences were measured and compared. Results: ILG ( P > 0.05) and FWS ( P < 0.01) were greater in males than in females. ILG ( P < 0.05) and FWS ( P > 0.05) were greater in adolescents than in adults. ILG and FWS were not significantly related with the vertical skeletal pattern (FHR, facial height ratio). ILG was the greatest in Class II cases but without significance. FWS was significantly greater in Class III than in Class I and Class II cases ( P < 0.05). At MIP, the ILG at RP increased as overjet ( P < 0.05) and upper lip to the aesthetic line ( P < 0.01) increased. At RP, the ILG increased as upper incisor exposure and the lips to the aesthetic line increased ( P < 0.001), and FWS decreased as overbite decreased ( P < 0.001). From MIP to RP, lip length showed the greatest decrease ( P < 0.001) in the large ILG group. Additionally, Bjork sum (the sum of the saddle, articular, and gonial angles), mandibular plane angle, anterior facial height, and ANB ( P < 0.001) showed the greatest increase, while OB ( P < 0.001) showed the greatest decrease in the large FWS group. The lip competent group showed the largest frequency distribution in the small ILG and FWS groups, while smile line frequency distribution showed no relationship with the level of ILG and FWS. Conclusions: Taking cephalometric measurements at RP would be helpful to evaluate the ILG and FWS more accurately, and to provide a more accurate diagnosis and treatment plan.