Qingren Zhu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Qingren Zhu has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
Wenmin Pang
Hefei National Laboratory for Physical Sciences at the Microscale, Structure Research Laboratory, University of Science and Technology of China, Chinese Academy of Sciences, Hefei 230026, China
4 shared publicationsYusong Wang
Hefei National Laboratory for Physical Sciences at the Microscale, Structure Research Laboratory, University of Science and Technology of China, Chinese Academy of Sciences, Hefei 230026, China
4 shared publicationsGuoyong Xu
Hefei National Laboratory for Physical Sciences at the Microscale, Structure Research Laboratory, University of Science and Technology of China, Chinese Academy of Sciences, Hefei 230026, People's Republic of China
3 shared publicationsWei-Tai Wu
Hefei National Laboratory for Physical Sciences at the Microscale, Structure Research Laboratory, University of Science and Technology of China, Chinese Academy of Sciences, Hefei 230026, China
3 shared publicationsJiasheng Qian
National Laboratory for Physical Sciences at the Microscale, University of Science and Technology of China, Hefei 230026, Anhui, People's Republic of China
2 shared publicationsRu Xia
National Laboratory for Physical Sciences at the Microscale, University of Science and Technology of China, Hefei 230026, Anhui, People's Republic of China
2 shared publications
Latest Publications
- 30 June 2008
- Published by Elsevier in Materials Letters
- Vol. 62 (17-18) , 2762-2765
Solvent-assisted self-assembly of amphiphilic polymer/surfactant complexes
- 30 June 2008
- Published by Elsevier in Materials Letters
- Vol. 62 (17-18) , 2762-2765
Solvent-assisted self-assembly of amphiphilic polymer/surfactant complexes
- 1 October 2007
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 107 (2) , 1100-1107
Synthesis of tercopolymer BA–MMA–VTES and surface modification of nano‐size Si3N4 with this macromolecular coupling agent
A new macromolecular coupling agent butyl acrylate (BA)‐methyl methacrylate (MMA)‐vinyl triethoxy silane (VTES) tercopolymer was synthesized using solution polymerization initiated by free radical initiator benzoyl peroxide (BPO) and dicumyl peroxide (DCP). Dodecylthiol is choosed as the chain transfer to control the molecule weight of this tercopolymer. The terpolymer's molecular structure was confirmed by FTIR and NMR, and its average molecular weight was determined by GPC. In this work, the tercopolymer BA–MMA–VTES is used for surface modification of silicon nitride (Si3N4) nanopowder. The structure surface properties and thermal stability of modified nano‐Si3N4 were systematically investigated by FTIR, TGA, TEM, and size distribution analyzer. The results show that the macromolecular coupling agent bonds covalently on the surface of nano‐sized Si3N4 particles and an organic coating layer is formed. The optimum loading of this macromolecular coupling agent BA–MMA–VTES tercopolymer is 5% (wt %) of nano‐sized Si3N4. TEM also reveals that modified nano‐Si3N4 possesses good dispersibility. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008
- 1 October 2007
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 107 (2) , 1100-1107
Synthesis of tercopolymer BA–MMA–VTES and surface modification of nano‐size Si3N4 with this macromolecular coupling agent
A new macromolecular coupling agent butyl acrylate (BA)‐methyl methacrylate (MMA)‐vinyl triethoxy silane (VTES) tercopolymer was synthesized using solution polymerization initiated by free radical initiator benzoyl peroxide (BPO) and dicumyl peroxide (DCP). Dodecylthiol is choosed as the chain transfer to control the molecule weight of this tercopolymer. The terpolymer's molecular structure was confirmed by FTIR and NMR, and its average molecular weight was determined by GPC. In this work, the tercopolymer BA–MMA–VTES is used for surface modification of silicon nitride (Si3N4) nanopowder. The structure surface properties and thermal stability of modified nano‐Si3N4 were systematically investigated by FTIR, TGA, TEM, and size distribution analyzer. The results show that the macromolecular coupling agent bonds covalently on the surface of nano‐sized Si3N4 particles and an organic coating layer is formed. The optimum loading of this macromolecular coupling agent BA–MMA–VTES tercopolymer is 5% (wt %) of nano‐sized Si3N4. TEM also reveals that modified nano‐Si3N4 possesses good dispersibility. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008
- 24 September 2007
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 107 (1) , 562-570
Surface modification of nano‐sized silicon nitride with BA‐MAA‐AN tercopolymer
In this work, a macromolecular coupling agent (BA‐MAA‐AN tercopolymer) was used for surface modification of native nano‐sized silicon nitride (Si3N4) powder. This modification strategy was designed for preparing nano‐Si3N4/NBR composites. The structure and surface properties of modified nano‐Si3N4 were systematically investigated by FTIR, XPS, TGA, TEM, Size Distributions Analyzer, and Contact Angle Measurement. It was found that, the optimum loading of BA‐MAA‐AN tercopolymer coated on the surface of nano‐sized Si3N4 is 10% of nano‐Si3N4. According to the spectra of FTIR, XPS and TGA, it can be inferred that this macromolecular coupling agent covalently bonds on the surface of nano‐sized Si3N4 particles and an organic coating layer is formed. The contact angle experiments show that the hydrophobic property of nano‐sized Si3N4 modified with macromolecular coupling agent is improved obviously. TEM reveals that modified nano‐Si3N4 possesses good dispersibility and the average diameter in NBR is less than 100 nm. It has also been found that the oil resistance of NBR based nanocomposites is improved greatly due to the modified nano‐Si3N4. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008
- 24 September 2007
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 107 (1) , 562-570
Surface modification of nano‐sized silicon nitride with BA‐MAA‐AN tercopolymer
In this work, a macromolecular coupling agent (BA‐MAA‐AN tercopolymer) was used for surface modification of native nano‐sized silicon nitride (Si3N4) powder. This modification strategy was designed for preparing nano‐Si3N4/NBR composites. The structure and surface properties of modified nano‐Si3N4 were systematically investigated by FTIR, XPS, TGA, TEM, Size Distributions Analyzer, and Contact Angle Measurement. It was found that, the optimum loading of BA‐MAA‐AN tercopolymer coated on the surface of nano‐sized Si3N4 is 10% of nano‐Si3N4. According to the spectra of FTIR, XPS and TGA, it can be inferred that this macromolecular coupling agent covalently bonds on the surface of nano‐sized Si3N4 particles and an organic coating layer is formed. The contact angle experiments show that the hydrophobic property of nano‐sized Si3N4 modified with macromolecular coupling agent is improved obviously. TEM reveals that modified nano‐Si3N4 possesses good dispersibility and the average diameter in NBR is less than 100 nm. It has also been found that the oil resistance of NBR based nanocomposites is improved greatly due to the modified nano‐Si3N4. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008
- 11 April 2007
- Published by Wiley in Polymer International
- Vol. 56 (7) , 847-852
Fabrication of multiwalled carbon nanotubes with polymer shells through surface RAFT polymerization
A core–shell hybrid nanostructure, possessing a hard backbone of multiwalled carbon nanotubes (MWNTs) and a soft shell of brush‐like poly(methyl methacrylate), has been successfully prepared via a reversible addition–fragmentation chain transfer (RAFT) process using a RAFT agent immobilized on MWNTs. Polymer‐modified MWNTs are easily dispersed in good solvents for the grafted polymer, such as toluene, tetrahydrofuran and CHCl3. This observation has been confirmed by transmission electron microscopy analysis. The content of polymer in the functionalized MWNTs can be well controlled by the feed ratio. It is believed that realizing these hybrid structures, on the basis of such simple grafting, will pave the way for the design, fabrication, optimization and eventual application of more functional carbon nanotube‐related nanomaterials. Copyright © 2007 Society of Chemical Industry
- 11 April 2007
- Published by Wiley in Polymer International
- Vol. 56 (7) , 847-852
Fabrication of multiwalled carbon nanotubes with polymer shells through surface RAFT polymerization
A core–shell hybrid nanostructure, possessing a hard backbone of multiwalled carbon nanotubes (MWNTs) and a soft shell of brush‐like poly(methyl methacrylate), has been successfully prepared via a reversible addition–fragmentation chain transfer (RAFT) process using a RAFT agent immobilized on MWNTs. Polymer‐modified MWNTs are easily dispersed in good solvents for the grafted polymer, such as toluene, tetrahydrofuran and CHCl3. This observation has been confirmed by transmission electron microscopy analysis. The content of polymer in the functionalized MWNTs can be well controlled by the feed ratio. It is believed that realizing these hybrid structures, on the basis of such simple grafting, will pave the way for the design, fabrication, optimization and eventual application of more functional carbon nanotube‐related nanomaterials. Copyright © 2007 Society of Chemical Industry
- 19 September 2006
- Published by IOP Publishing in Nanotechnology
- Vol. 17 (19) , 4999-5005
Controlled synthesis of novel 3D dendritic Bi2S3/cross-linked poly(vinyl alcohol) nanocomposites
- 19 September 2006
- Published by IOP Publishing in Nanotechnology
- Vol. 17 (19) , 4999-5005
Controlled synthesis of novel 3D dendritic Bi2S3/cross-linked poly(vinyl alcohol) nanocomposites