MFMing Feng

Ming Feng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ming Feng has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    CFD-Based Analysis of Loading Performance and Hydrodynamic Effects in a Partial-Arc Aerostatic Radial Bearing

    by Ruiran Ma, Jiashuo Zhang, Ming Feng, Zhixin Jia, Jin Wang

    With the widespread use of high-speed motorized spindles in precision machining, conventional contact loading methods are no longer adequate for stiffness loading tests under high-speed operating conditions. Non-contact loading technology based on a partial-arc aerostatic radial bearing offers an effective alternative. In this study, a CFD-based hydrodynamic model was developed for the gas-film flow field in a partial-arc aerostatic radial bearing. The effects of bearing geometric parameters, such as chamber configuration, supply-orifice structure, and eccentricity, on loading characteristics were investigated. The influence of hydrodynamic effects under high-speed rotation on the loading force stability and stiffness-testing accuracy was analyzed, and an asymmetric shallow–deep composite chamber design was proposed to mitigate these effects. The results indicate that the partial-arc aerostatic radial bearing, designed based on both static characteristics and rotational performance analysis, can effectively suppress hydrodynamic effects and improve loading force stability and stiffness-testing accuracy.

  • Open Access

    Study on Torque and Contact Characteristics of Thrust Bearing with Skewed Rollers in No-Back Brake

    by Tianming Ren, Shuanglu Li, Ziyu Cheng, Ming Feng

    To investigate the performance of skewed roller thrust bearings (SRTBs) in the no-back brake of horizontal stabilizer trim actuators (HSTAs), this study conducts systematic theoretical modelling, experimental validation, and numerical simulation focusing on torque and contact characteristic optimization. First, a theoretical model for resistance torque of the SRTB was established based on the kinematics and load behaviours, followed by a systematic investigation into the effects of roller centre position and skew angle on the bearing’s resistance torque. An experimental platform was built, and tests were carried out on the bearings to verify the results of the theoretical analysis. Subsequently, a tangent arc profile was applied to the rollers to mitigate stress concentration at their ends, and the influences of crown drop and straight segment length on roller contact stress were explored by finite element method. Finally, considering the actual operating conditions of no-back brake components, the effect of roller centre position on brake deformation and roller contact stress was studied. The results show that the resistance torque increases with both roller skew angle and centre position, but is insensitive to rotational speed. Roller contact stress first decreases rapidly and then increases gradually with crown drop, indicating the existence of an optimal crown drop value. This optimal value first decreases and then increases with increasing straight segment length, with the optimal parameters determined as 9 μm (crown drop) and 4 mm (straight segment length). In practical applications, asymmetric loading on the two sides of the ratchet disc causes uneven roller contact distribution and stress concentration. Adjusting the roller centre position to balance the deformation of the ratchet disc and rod shoulder can effectively reduce contact stress, with the optimal position being approximately 48 mm (slightly offset from the load centre of 49 mm). This study provides valuable insights for the optimal design of SRTBs and no-back brakes.

  • Open Access

    Turbulence Effects on the Dynamic Characteristics of Non-Circular Journal Bearings Under Large Sommerfeld Number Conditions

    by Tianming Ren, Ming Feng

    Turbulence and instability problems are unavoidable challenges for fluid film bearings as rotation speed continues to rise. This paper investigates the effect of turbulence on the dynamic characteristics of two non-circular journal bearings, hybrid two-lobe bearing (TLB) and hybrid three-step recess bearing (TSRB), under large Sommerfeld number conditions. The linear perturbation method and nonlinear trajectory method are employed in this work. The bearing stiffness coefficients, damping coefficients, and threshold speed are determined by solving the perturbed Reynolds equation using the finite element method. Additionally, the bearing nonlinear trajectories are obtained by solving the motion equation and the dynamic Reynolds equation simultaneously. The threshold speed and trajectory spectrum are utilized to evaluate the bearing dynamic characteristics, and the results derived from laminar and turbulence models are compared. The research on those two different types of bearings has yielded a consistent conclusion: under large Sommerfeld number conditions, the onset of turbulence significantly enhances both the stiffness and damping coefficients of the bearings, as well as the onset speed for the appearance of half-frequency components in the trajectory. The findings suggest that turbulence lubrication is beneficial for improving the dynamic characteristics of these non-circular bearings.


  • Open Access

    Static Characteristics of a Micro Bidirectional Rotating Thrust Bearing with Novel Herringbone Grooves

    by Tianming Ren, Ming Feng

    Bidirectional rotating thrust bearings are critical components for the development of bidirectional equipment. This paper presents the design and numerical study of an oil-lubricated bidirectional rotating thrust bearing with novel herringbone grooves, which consists of three groups of spiral grooves. The lubrication mechanism of the novel herringbone grooves is revealed. The static characteristics of the thrust bearing are numerically investigated by solving the Reynolds equation applying the finite element method. The influences of the radial width, depth, angle, circumferential width ratio, and number of the groove on the bearing performance are analyzed. The results show that there exists an optimal combination of groove radial widths that ensures equal load capacities in both rotation directions while achieving their maximum values. Furthermore, optimal values for the depth, angle, circumferential width ratio, number of the grooves can also enhance the bearing’s load capacity, maximum film pressure, and energy efficiency. Additionally, it is found that groove radial width has the most significant influence on the bearing performance difference under different rotation directions, followed by the effects from the angle, number, circumferential width ratio, and depth of the groove. The conclusions obtained can provide a valuable reference for the research and application of bidirectional thrust bearings.


  • Open Access

    Design and Performance Analysis of Windings Considering High Frequency Loss and Connection Mode of a Starter Generator

    by Xiaojun Ren, Zhikai Chen, Rui Du, Ming Feng

    The starter generator is the key component of the aircraft’s starter generation system. A high power density, efficiency, and reliability are essential for an aircraft’s starter generator. The configuration of the windings is closely related to the performance of the starter generator. In this paper, the winding performance analysis and design are studied. Considering the skin effect, circulation effect, and proximity effect, a calculation model of winding loss under high-frequency operation is established. The motor performance under different winding connections is compared. Through a comprehensive comparison of starting performance, generation loss, and process performance differences, the optimum configuration of windings is identified. The performance of the starter generator including winding resistance, current, and no-load loss was tested on the prototype platform to verify the rationality and correctness of the analysis and design methods.


  • Open Access

    Loss and Thermal Analysis of a High-Power-Density Permanent Magnet Starter/Generator

    by Xiaojun Ren, Zhikai Chen, Rui Du, Ming Feng

    Reducing heat and improving the overall operation stability of the motor play a key role in the design of a starting engine. This paper focuses on the loss and thermal analysis of a permanent magnet (PM) brushless machine used in starter generators. The loss of the starter generator was calculated through a combination of theoretical analysis and the finite element method. A thermal analysis model was established based on the division of the fluid domain, boundary grid, heat source setting, and so on. The temperature fields of the whole motor and the main components were calculated and analyzed. The main factors affecting the air cooling effect were analyzed, including air flow rate, air temperature, and motor speed. A prototype experimental platform of the SG motor was built. The efficiency and temperature rise in the motor were tested. The temperature values were compared with the calculated values. The experimental results show that the performance of the motor is excellent, and the error between the temperature and the design calculation is less than 10% under each load torque. The accuracy of the thermal analysis method is verified. The correctness of the motor transient model was also confirmed through a temperature rise experiment under rated conditions, providing a research basis for improving operation efficiency.


  • Open Access

    Multi-Physical Field Analysis and Optimization Design of the High-Speed Motor of an Air Compressor for Hydrogen Oxygen Fuel Cells

    by Xiaojun Ren, Ming Feng, Jinliang Liu, Rui Du

    The hydrogen oxygen fuel cell is a power source with significant potential for development. The air compressor provides ample oxygen for the fuel cell, and as a key component of the air compressor, the performance of the motor greatly impacts the efficiency of the fuel cell. In order to enhance the system performance of high-speed permanent magnet motors, optimization was conducted on the motor’s geometric dimensions to minimize rotor loss and maximize power density, taking into account the comprehensive constraints of electromagnetic and mechanical properties. The finite-element method was employed to analyze the motor’s performance, conducting a multi-physical field analysis that included electromagnetic field, rotor loss, and mechanical strength analysis, as well as temperature field analysis. Aiming at the problem of high temperature rise in high-speed motor winding, the influence of the cooling water flow rate on the winding temperature rise was analyzed and simulated. Based on the analysis results, the minimum cooling water flow rate was obtained. According to the optimized design results, a prototype of an 18 kW, 100,000 rpm motor was manufactured, and the efficiency and temperature rise were tested. The experimental results verify the correctness and effectiveness of the optimal design.


  • The Effect of Rounding in Bump Foil Structure on the Dynamic Performance of Foil Journal Bearings

    by Hongyang Hu, Ming Feng

    The performance of air foil journal bearings is closely related to the stiffness of the bump foil. In this paper, the stiffness characteristics of bump foil having a rounding in the structure are investigated and compared with previous models. The dynamic coefficients of bearings and the stability threshold speed (STS) of a rotor supported by the bearings are numerically calculated using FEM and are compared to models with various rounding radius and friction coefficients. The results show that the presence of rounding indicates a significant effect on the total dynamic and the stability performance of foil bearings and there is an optimum rounding radius to maximize the structural stiffness and stability. The validity of the theoretical analysis was verified by the structural stiffness and stability experiments. The results are expected to be helpful to bearing designers, researchers, and academicians concerned.

  • Design and Optimization of a Radial High-Temperature Superconducting Magnetic Bearing

    by Xiao Jun Ren, Ming Feng, Tianming Ren

    High temperature superconducting magnetic bear-ings can be suspended without contact and self-stability. They are widely used in many industries. Before the actual production of magnetic bearings, the structural design and parameter opti-mization are very important. The design and optimization meth-od of radial high temperature magnetic bearing are studied in this paper. The force calculation expression was deduced. The bearing capacity of high temperature magnetic bearings was op-timized. The performance of the radial HTSMB was analyzed and verified by FEM


  • Fast Fault Diagnosis Method for Hall Sensors in Brushless DC Motor Drives

    by Qian Zhang, Ming Feng

    Brushless direct current (BLDC) motors with Hall sensors have been widely used in myriad industrial and commercial applications due to their simplicity and low cost. Meanwhile, the fault tolerant control (FTC) of Hall sensor drives has attracted renewed research attention. During FTC, the motor drives need to diagnose the Hall-sensor fault(s) and reconstruct the faulty signal(s). In this context, we propose an innovative fast fault diagnosis (FFD) method for analyzing different fault cases and diagnosing faulty signal(s) in the shortest possible time. Compared with established fault diagnosis (FD) methods, the FFD method does not require complicated vector-tracking observers, and it is capable of handling up to two simultaneous faults while greatly improving the diagnostic speed. Our simulation and experimental results verify the effectiveness of the proposed method and demonstrate its advantages over established methods particularly during transient operations. Due to the simplicity of the diagnostic algorithm, the proposed FFD method can be readily implemented in conventional drive systems, either through additional coding within existing controllers or as an auxiliary circuit.