FNFarid Nouar

Farid Nouar

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Farid Nouar has a total of 66 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Green Scalable Method to Prepare Zr Oxide Dicarboxylate Metal–Organic Frameworks

    by Debanjan Chakraborty, Sanchari Dasgupta, Oleksii Kolmykov, Maria Inês Severino Neves, Vanessa Pimenta, Abeer Mohtar, Cátia Freitas, Iurii Dovgaliuk, Moises L. Pinto, Georges Mouchaham, et al.

    We report the synthesis of a series of isoreticular hydrophobic microporous zirconium dicarboxylate metal–organic frameworks (MOFs), MIL‐140(Zr)s, under green ambient pressure conditions. Their pore sizes and hydrophilic/hydrophobic balance can be finely adjusted with a view to potential applications. MIL‐140A(Zr) has a pore size of 3.2 Å, made from benzene dicarboxylate ligands, and MIL‐140B(Zr) has a pore size of 4 Å built from naphthalene dicarboxylate ligands, the latter with a more hydrophobic balance. We report herein the synthesis optimization, scale‐up, and shaping of this MOF series, avoiding the use of chemicals, organic solvents that are toxic or/and Carcinogenic, Mutagenic, Reprotoxic (CMR), and corrosive starting chemicals. The activation process required no additional washing/purification steps. Finally, we considered their use for the removal of traces of acetic acid for cultural heritage preservation applications in the presence of moisture from indoor air at museums, archives, and private collections. After a scale‐up of MIL‐140B(Zr) at a 50 g scale using a 5 L double‐wall batch reactor, we evaluated the performance of acetic acid capture under humid conditions. The performance of shaped MIL‐140B(Zr) in comparison with benchmark zeolites and activated carbons was also evaluated.

  • Open Access

    A versatile shaping route for the controlled release of nitric oxide from porous solids

    by Rosana V. Pinto, Zhi Lin, Farid Nouar, Fernando Antunes, João Pires, João Rocha, Christian Serre, Moisés L. Pinto

    Different classes of ordered porous materials, metal-organic frameworks and titanosilicates, with potential as nitric oxide (NO) delivery carriers are combined with a biocompatible hydrophobic polymer, polycaprolactone (PCL), to obtain a more clinically practical format and to improve the delivery kinetics and stability of the porous materials for NO-based therapies. Incorporation into PCL films transforms the rapid, minute-scale NO release of the powders into sustained release profiles lasting up to 24 h in biologically relevant media. By selecting the type of porous solid and tuning its loading and particle size within the polymer matrix, the NO dosage and release rate can be modulated. The film-like form of these PCL/porous material composites is particularly promising for clinical applications, such as wound dressings, where controlled NO release may support healing while providing antibacterial effects.

  • Open Access

    Unlocking the scale-up of the benchmark MOFs MIL-53(Al)’s

    by Shyamapada Nandi, Debanjan Chakraborty, Ayoub Daouli, Iurii Dovgaliuk, Nicolas Heymans, Ieuan Cornu, Pierre Florian, Guy De Weireld, Guillaume Maurin, Farid Nouar, et al.

    Environment-friendly synthesis of metal-organic frameworks (MOFs) is crucial to meet growing industrial demand. Here, we present a generalized and scalable route for the production of the prototypical Al-OH chain-based microporous and flexible MIL-53 (MIL = Materials Institut Lavoisier) with various functional groups (X = -H, ˗NH2, ˗NO2, -OH, -COOH)). Until recently, the scale-up of these robust and cost-effective Al-MOFs was hindered by challenges associated with their synthesis and purification, restricting their practical deployment. In this work, we optimized a reflux-based aqueous synthesis method to yield either nano-sized or micron-sized particles. Additionally, we developed a novel, rapid and ambient-pressure exchange process using green solvents to efficiently remove residual free linkers from the MOF pores. This approach affords high-purity MOFs and enables large-scale production with a high space-time yield (ca. 200 kg/m³/day), paving the way for broader implementation. As a proof of concept, we successfully produced MIL-53(Al)-NH2 up to 300g scale maintaining high crystalline quality and adsorption properties comparable to those achieved at smaller scale. Finally, spherical beads of MIL-53(Al)-NH₂ were fabricated using bentonite as binder. These beads exhibited excellent mechanical strength, while retaining their CO₂ adsorption performance, as evidenced by both single-component adsorption isotherms and dynamic breakthrough experiments.


  • Top Cited Papers
    Open Access

    Cost Estimation of the Production of MIL-100(Fe) at Industrial Scale from Two Upscaled Sustainable Synthesis Routes

    by Maria Inês Severino, Cátia Freitas, Vanessa Pimenta, Farid Nouar, Moisés L. Pinto, Christian Serre

    Understanding the impact of MOF synthesis conditions on the production cost is vital in order to have a competitive product with a view toward industrial applications. Here, considering the benchmark mesoporous iron(III) trimesate MIL-100(Fe) as a prototypical example, we show that the production cost can reach <30 $/kg if a careful selection of the synthetic route is made. Two routes were considered in the analysis, using sulfate and nitrate as iron sources. A new optimized synthesis protocol in a 5 L laboratory pilot-scale reactor based on iron sulfate was developed using optimized sustainable aqueous ambient pressure conditions, leading to larger particles and a higher space-time yield. Based on reliable pilot-scale data and established chemical engineering estimation methods, this leads to a significantly lower production cost of high-quality MIL-100(Fe), achieving a potential competitive product.


  • Open Access

    A scalable robust microporous Al-MOF for post-combustion carbon capture

    by Bingbing Chen, Dong Fan, Rosana V. Pinto, Iurii Dovgaliuk, Shyamapada Nandi, Debanjan Chakraborty, Nuria Garcia, Alexandre Vimont, Charles J. McMonagle, Marta Bordonhos, et al.

    Herein we report on a robust microporous aluminum tetracarboxylate framework, MIL-120(Al)-AP, (MIL, AP: Institute Lavoisier and Ambient Pressure synthesis, respectively), which exhibits high CO2 uptake (1.9 mmol g-1 at 0.1 bar, 298 K). In situ Synchrotron X-ray diffraction measurements together with Monte Carlo simulations reveal that this structure offers a favorable CO2 capture configuration with the pores being decorated with a high density of µ2-OH groups and accessible aromatic rings. Meanwhile, based on calculations and experimental evidences, moderate host-guest interactions Qst (CO2) value of MIL-120(Al)-AP (~40 kJ mol-1) is deduced, suggesting a relatively low energy penalty for full regeneration. Moreover, an environmentally friendly ambient pressure green route, relying on inexpensive raw materials, is developed to prepare MIL-120(Al)-AP at the kilogram scale with a high yield while the MOF is further shaped with inorganic binders as millimeter-sized mechanically stable beads. First evidences of its efficient CO2/N2 separation ability are validated by breakthrough experiments while IR operando experiments indicate a kinetically favorable CO2 adsorption over water. Finally, a techno-economic analysis gives an estimated production cost of about 13 $/kg, significantly lower than for other benchmark MOFs. These advancements make MIL-120(Al)-AP an excellent candidate as an adsorbent for industrial scale CO2 capture processes.

  • Top Cited Papers
    Open Access

    Large‐Scale Production of Metal–Organic Frameworks

    by Debanjan Chakraborty, Aysu Yurdusen, Georges Mouchaham, Farid Nouar, Christian Serre

    Metal–organic frameworks (MOFs) show captivating performances in many large‐scale applications including gas adsorption and separation, heat reallocation, water production, or remediation which can overcome important drawbacks of the conventionally used porous materials in the industry. This raises, therefore, the commercial interest in MOFs which brings the necessity to decrease the cost of their production, calling for the synthesis optimization from small‐scale to large‐scale. However, the commercial availability, yet very limited, is highly dependent on their production cost. Thus, to promote the commercial development and availability of MOFs, many steps can be taken. In this work, the state‐of‐art of the large‐scale production of MOFs can be first outlined, before discussing the criteria of greener MOF synthesis processes. Besides, a critical evaluation of the available synthesis routes for large‐scale production can be given, taking into consideration their cost, environmental impact, safety, and feasibility. Moreover, since there are strong limitations to the use in the powder form, the shaping procedures can thus be discussed briefly to outline the prospects of MOFs for different industrial applications. Finally, yet importantly, the perspective for MOFs commercialization can be highlighted with an emphasis on the necessity of techno‐economic analyses and life‐cycle assessments.


  • Open Access

    Metal Organic Frameworks for the selective and efficient capture of formaldehyde

    by Nicolas Sadovnik, Pengbo Lyu, Farid Nouar, Mégane Muschi, Menghao Qin, Guillaume Maurin, Christian Serre, Marco Daturi

    Addressing the challenge of purifying poor-quality indoor air while respecting the principles of sustainable development requires innovative, advanced sustainable materials. Coupling state-of-the-art spectroscopic techniques with theoreti-cal calculations, we revealed an advantageous mild chemisorption synergistic mechanism for trapping the most harmful indoor pollutant (i.e. formaldehyde) in a reversible way, without significant energy penalties for regeneration. Based on these data we have designed a facile green and scalable synthesis protocol, and shaped a porous water stable Al pyra-zole dicarboxylate metal-organic framework able to perform as a highly efficient reusable filter. This MOF, denoted Al-3.5-PDA or MOF-303, shows unprecedented selectivity and storage capacity for formaldehyde, in conditions repre-sentative of severe use in housing or vehicle cockpits (variable VOC mixtures and concentrations, humidity, tempera-ture), without any accidental release. Moreover, it can be easily regenerated by a domestic protocol guarantying reuse of the filter for a number of cycles representing at least 10 years of continuous use.


  • Open Access

    A Green One-Pot Preparation Method for Very High Porous Solids Loading Paper Composites

    by Pierre Tignol, Vanessa Pimenta, Anne-Laurence Dupont, Silvia Carvalho, Abeer Al Mohtar, Maria Ines Severino, Farid Nouar, Moises Pinto, Christian Serre, Bertrand Lavédrine

    Owing to their high porosity and tunability, porous solids such as Metal-Organic Frameworks (MOFs), Zeolites and Activated Carbons (ACs) are of great interest in various fields for instance gas separation, catalysis, water and air purification, among others. These materials are usually in powder form and need to be shaped in some practical way that does not modify their intrinsic property (i.e. porosity). Making porous, freestanding and flexible sheets is a relevant shaping strategy. However, achieving high loadings (> 70 wt %) can challenge mechanical properties. We have developed a new green and simple method that combines two cellulosic fibrous structures of different size, i.e. softwood bleached kraft fibres (S) and nano-fibrillated cellulose (NFC), to form a high porous solids loading (>70 wt %) paper sheet. This dual fiber system produces a synergistic effect, where S provides flexibility while NFC acts as a nanostructuring and mechanical strengthening agent with an optimal S:NFC=25:75 ratio. This method can be applied for the preparation of sheets exhibiting the mechanical properties of paper while keeping the adsorption properties of a wide range of porous solids (MOFs, ACs, Zeolites). As an exemple of application, a MOF paper has been considered for the capture of polar volatile organic compounds, showing better performance than other shaping processes such as beads and granules.


  • Open Access

    Cost Estimation of the Sustainable Production of MIL-100(Fe) at Industrial Scale from two upscaled synthesis routes

    by Farid Nouar, Christian Serre, Moisés L. Pinto, Maria Inês Severino, Vanessa Pimenta, Catia Freitas

    Understanding the impact of MOF synthesis conditions on the production cost is vital in order to have a competitive product in a view of industrial applications. Here, considering the benchmark mesoporous iron(III) trimesate MIL-100(Fe) as a prototypical example, we show that the production cost can reach <30 $/kg if a careful selection of the synthetic route is made. Two routes were considered in the analysis, using sulfate and nitrate as iron sources. A new optimized synthesis protocol in a laboratory pilot-scale reactor of 5 liters based on iron sulfate was developed using optimized sustainable ambient pressure conditions, leading to larger particles and a higher STY. Based on reliable pilot-scale data and established chemical engineering estimation methods, this leads to a significantly low production cost of high quality MIL-100(Fe) achieving a potential competitive product.


  • Open Access

    Separation of Branched Alkanes Feeds by a Synergistic Action of Zeolite and Metal‐Organic Framework

    by Pedro F. Brântuas, Adriano Henrique, Mohammad Wahiduzzaman, Alexander von Wedelstedt, Tanmoy Maity, Alírio E. Rodrigues, Farid Nouar, U‐Hwang Lee, Kyung‐Ho Cho, Guillaume Maurin, et al.

    Zeolites and metal‐organic frameworks (MOFs) are considered as “competitors” for new separation processes. The production of high‐quality gasoline is currently achieved through the total isomerization process that separates pentane and hexane isomers while not reaching the ultimate goal of a research octane number (RON) higher than 92. This work demonstrates how a synergistic action of the zeolite 5A and the MIL‐160(Al) MOF leads to a novel adsorptive process for octane upgrading of gasoline through an efficient separation of isomers. This innovative mixed‐bed adsorbent strategy encompasses a thermodynamically driven separation of hexane isomers according to the degree of branching by MIL‐160(Al) coupled to a steric rejection of linear isomers by the molecular sieve zeolite 5A. Their adsorptive separation ability is further evaluated under real conditions by sorption breakthrough and continuous cyclic experiments with a mixed bed of shaped adsorbents. Remarkably, at the industrially relevant temperature of 423 K, an ideal sorption hierarchy of low RON over high RON alkanes is achieved, i.e., n‐hexane ≫ n‐pentane ≫ 2‐methylpentane > 3‐methylpentane ⋙ 2,3‐dimethylbutane > isopentane ≈ 2,2‐dimethylbutane, together with a productivity of 1.14 mol dm−3 and a high RON of 92, which is a leap‐forward compared with existing processes.