Nils Surkamp
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Nils Surkamp has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
- Carsten Brenner
Photonics and Terahertz Technology, Ruhr University Bochum, Bochum, Germany
6 shared publications - Martin Rudolf Hofmann
Photonics and Terahertz Technology Ruhr University Bochum Bochum Germany
3 shared publications A. Klehr
Ferdinand‐Braun‐Institut, Leibnitz‐Institut für Höchstfrequenztechnik Berlin Germany
2 shared publicationsA. Knigge
Ferdinand‐Braun‐Institut, Leibnitz‐Institut für Höchstfrequenztechnik Berlin Germany
2 shared publications- Lisa C. Kreuzer
Chair for Photonics and Terahertz Technology, Ruhr-University Bochum, Bochum, Germany
2 shared publications M.R. Hofmann
Faculty of Electrical Engineering and Information Technology, Photonics and Terahertz Technology Ruhr University Bochum Germany
2 shared publications
Latest Publications
- Open Access
- 6 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 15 (3) , 526-530
Dispersive Mirror-Based Phase Control in THz Homodyne Systems
In this paper we present an alternative sampling approach for CW terahertz homodyne systems that overcomes limitations regarding the measurement of dispersive samples of currently used techniques. The wavelength-dependent phase-delay mirrors, that were developed for this work, induce a frequency dependent phase shift of up to $\frac{\pi }{2}$. This technique allows sampling of the THz-field, by tuning the laser sources in such a way that a constant frequency difference is maintained and the center frequency is shifted. In our configuration, the phase shift between transmitter and receiver arm depends only on the center frequency of the lasers. This allows for replacing the movement of a delay stage with variation of the center frequency to capture a THz trace. Consequently, measurements are not constrained by the speed of the delay line anymore. Furthermore, this phase shift is unaffected by differences in path length within the setup and does not require phase modulators. Prior simulations show that these mirrors achieve a phase shift up to $\pi$ in the C-Band for a difference frequency of 280 GHz, which could be confirmed by our measurements. We successfully demonstrated the first application by measuring sample thickness.
- 6 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 15 (3) , 526-530
Open AccessDispersive Mirror-Based Phase Control in THz Homodyne Systems
In this paper we present an alternative sampling approach for CW terahertz homodyne systems that overcomes limitations regarding the measurement of dispersive samples of currently used techniques. The wavelength-dependent phase-delay mirrors, that were developed for this work, induce a frequency dependent phase shift of up to $\frac{\pi }{2}$. This technique allows sampling of the THz-field, by tuning the laser sources in such a way that a constant frequency difference is maintained and the center frequency is shifted. In our configuration, the phase shift between transmitter and receiver arm depends only on the center frequency of the lasers. This allows for replacing the movement of a delay stage with variation of the center frequency to capture a THz trace. Consequently, measurements are not constrained by the speed of the delay line anymore. Furthermore, this phase shift is unaffected by differences in path length within the setup and does not require phase modulators. Prior simulations show that these mirrors achieve a phase shift up to $\pi$ in the C-Band for a difference frequency of 280 GHz, which could be confirmed by our measurements. We successfully demonstrated the first application by measuring sample thickness.
- Open Access
- 1 January 2025
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 61 (1)
Diode Laser‐Based Generation of Mode‐Locked Pulses at 1067 Nm (290 fs, 69 W Peak Power)
We demonstrate the diode laser‐based generation of mode‐locked pulses with 290 fs temporal width and 69 W peak power at a centre wavelength of 1067 nm. The laser diode is operated in an external cavity configuration at a repetition rate of 1.05 GHz. The laser operates passively modelocked with a reverse biased absorber section. The chirped output pulses are compressed close to the transform limit by means of an optimized grating compressor. This tailored pulse compression delivers almost transform limited pulses with specifications sufficient for THz time domain spectroscopy or nonlinear microscopy applications.
- 1 January 2025
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 61 (1)
Open AccessDiode Laser‐Based Generation of Mode‐Locked Pulses at 1067 Nm (290 fs, 69 W Peak Power)
We demonstrate the diode laser‐based generation of mode‐locked pulses with 290 fs temporal width and 69 W peak power at a centre wavelength of 1067 nm. The laser diode is operated in an external cavity configuration at a repetition rate of 1.05 GHz. The laser operates passively modelocked with a reverse biased absorber section. The chirped output pulses are compressed close to the transform limit by means of an optimized grating compressor. This tailored pulse compression delivers almost transform limited pulses with specifications sufficient for THz time domain spectroscopy or nonlinear microscopy applications.
- 22 November 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (25) , 44659-44670
Self mode-locking and passive mode-locking in monolithic two-section InGaAsP/InP quantum well laser diode
We analyze different mode-locking regimes of a monolithic two-section InGaAsP/InP quantum well mode-locked laser. By varying the electrical operation conditions, we investigate and compare the transition from self mode-locking via four wave mixing to passive mode-locking. The results indicate that self mode-locking predominates, resulting in pulse durations as short as 330 fs, accompanied by a narrow linewidth frequency comb. In contrast, passive mode-locking does not provide sub-ps pulses and delivers significantly broadened comb lines.
- 22 November 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (25) , 44659-44670
Self mode-locking and passive mode-locking in monolithic two-section InGaAsP/InP quantum well laser diode
We analyze different mode-locking regimes of a monolithic two-section InGaAsP/InP quantum well mode-locked laser. By varying the electrical operation conditions, we investigate and compare the transition from self mode-locking via four wave mixing to passive mode-locking. The results indicate that self mode-locking predominates, resulting in pulse durations as short as 330 fs, accompanied by a narrow linewidth frequency comb. In contrast, passive mode-locking does not provide sub-ps pulses and delivers significantly broadened comb lines.
- 17 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 67-69
Fast CW-THz System Employing a Dual Mode Y-Branch DFB Laser
We present a photonic CW-THz system operating at 1 THz capable of measuring the phase information of the THz path with a measurement rate of 10 kHz and micrometer precision. The 1 THz beating signal is generated in a monolithic dual mode Y-branch DFB laser, where one of the emission modes is tuned in wavelength by current density with a modulation frequency of 500 kHz. The system performance is demonstrated by sampling the position of a loudspeaker membrane through an optically opaque material.
- 17 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 67-69
Fast CW-THz System Employing a Dual Mode Y-Branch DFB Laser
We present a photonic CW-THz system operating at 1 THz capable of measuring the phase information of the THz path with a measurement rate of 10 kHz and micrometer precision. The 1 THz beating signal is generated in a monolithic dual mode Y-branch DFB laser, where one of the emission modes is tuned in wavelength by current density with a modulation frequency of 500 kHz. The system performance is demonstrated by sampling the position of a loudspeaker membrane through an optically opaque material.
- 31 May 2022
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12134, 30-37
THz metrology with monolithic tunable two-color diode lasers
We use a slotted Y-branch Laser for Terahertz thickness measurements of high resistive float zone silicon wafers of different thicknesses. The laser provides two-color emission in the 1550 nm region with an optical beat frequency of 1 THz. It is used as a photonic source for thickness measurements of high resistive silicon wafers with continuous wave Terahertz radiation. Frequency tuning is obtained through segment current tuning of the individual branches. We determine the sample´s refractive index and thickness by MSE fitting of the theoretical etalon transmission to the experimental results without additional knowledge.
- 31 May 2022
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12134, 30-37
THz metrology with monolithic tunable two-color diode lasers
We use a slotted Y-branch Laser for Terahertz thickness measurements of high resistive float zone silicon wafers of different thicknesses. The laser provides two-color emission in the 1550 nm region with an optical beat frequency of 1 THz. It is used as a photonic source for thickness measurements of high resistive silicon wafers with continuous wave Terahertz radiation. Frequency tuning is obtained through segment current tuning of the individual branches. We determine the sample´s refractive index and thickness by MSE fitting of the theoretical etalon transmission to the experimental results without additional knowledge.
- Open Access
- 12 September 2021
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 57 (24) , 936-938
Current tuned slotted Y‐branch laser for wafer thickness measurements with THz radiation
A slotted Y‐branch laser diode that emits two spectral modes at a difference frequency of about 1 THz is investigated in the context of photonic based cw‐THz measurements. The beating frequency of the emitted laser light can be tuned by ±10.5 GHz around 1 THz by changing the applied laser current, which allows for potentially fast measurements. A second spectral window of ±6.5 GHz was found at 850 GHz. Pointwise scanning of the difference frequency is demonstrated with thickness determination of HRFZ‐Si wafer samples as a possible application scenario.
- 12 September 2021
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 57 (24) , 936-938
Open AccessCurrent tuned slotted Y‐branch laser for wafer thickness measurements with THz radiation
A slotted Y‐branch laser diode that emits two spectral modes at a difference frequency of about 1 THz is investigated in the context of photonic based cw‐THz measurements. The beating frequency of the emitted laser light can be tuned by ±10.5 GHz around 1 THz by changing the applied laser current, which allows for potentially fast measurements. A second spectral window of ±6.5 GHz was found at 850 GHz. Pointwise scanning of the difference frequency is demonstrated with thickness determination of HRFZ‐Si wafer samples as a possible application scenario.
- Open Access
- 1 January 2020
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 56 (2) , 91-93
Mode‐locked diode laser‐based two‐photon polymerisation
In this Letter, the authors present the construction of three‐dimensional microstructures by two‐photon polymerisation induced by ultrashort pulses of a mode‐locked diode laser. The ultrafast light source is based on a diode laser with segmented metallisation to realise a waveguide integrated saturable absorber. It is subsequently amplified and compressed resulting in ultrashort laser pulses of 440 fs length and average output power of 160 mW at a fundamental repetition rate of 383.1 MHz. These pulses are coupled into a customised two‐photon polymerisation setup. A series of suspended lines were fabricated between support cuboids for testing the process behaviour. A 3D structure with complex features was polymerised to demonstrate the high potential for mode‐locked diode lasers in the field of direct laser writing.
- 1 January 2020
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 56 (2) , 91-93
Open AccessMode‐locked diode laser‐based two‐photon polymerisation
In this Letter, the authors present the construction of three‐dimensional microstructures by two‐photon polymerisation induced by ultrashort pulses of a mode‐locked diode laser. The ultrafast light source is based on a diode laser with segmented metallisation to realise a waveguide integrated saturable absorber. It is subsequently amplified and compressed resulting in ultrashort laser pulses of 440 fs length and average output power of 160 mW at a fundamental repetition rate of 383.1 MHz. These pulses are coupled into a customised two‐photon polymerisation setup. A series of suspended lines were fabricated between support cuboids for testing the process behaviour. A 3D structure with complex features was polymerised to demonstrate the high potential for mode‐locked diode lasers in the field of direct laser writing.
- Open Access
- 1 May 2018
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 54 (10) , 640-641
Asynchronous sampling terahertz time‐domain spectroscopy using semiconductor lasers
Asynchronous optical sampling terahertz time‐domain spectroscopy using semiconductor laser‐based ultra‐short pulse sources is demonstrated. A pair of hybridly mode‐locked edge‐emitting external cavity lasers operating at a wavelength of 830 nm is used. Terahertz traces with spectral components over a range of 250 GHz are achieved.
- 1 May 2018
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 54 (10) , 640-641
Open AccessAsynchronous sampling terahertz time‐domain spectroscopy using semiconductor lasers
Asynchronous optical sampling terahertz time‐domain spectroscopy using semiconductor laser‐based ultra‐short pulse sources is demonstrated. A pair of hybridly mode‐locked edge‐emitting external cavity lasers operating at a wavelength of 830 nm is used. Terahertz traces with spectral components over a range of 250 GHz are achieved.