Youyi Sun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Youyi Sun has a total of 191 co-authors. Here are the top co-authors by number of shared publications:
Yang Cao
School of Materials Science and Engineering, North University of China, Taiyuan 030051, China
20 shared publicationsNing Gu
School of Energy and power Engineering, North University of China, Taiyuan, 030051, CHINA
12 shared publications- Qiang Fu
School of Civil and Environmental Engineering, University of Technology Sydney, Ultimo, NSW 2007, Australia
12 shared publications - Yaqing Liu
Shanxi Province Key Laboratory of Functional Nanocomposites, North University of China, Taiyuan 030051, China
9 shared publications Zixuan Liu
School of Materials Science and Technology North University of China Taiyuan People's Republic of China
9 shared publicationsChunhong Qi
Shanxi Province Key Laboratory of Functional Nanocomposites, North University of China, Taiyuan, 030051, PR China
7 shared publications
Latest Publications
- 2 July 2026
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (36)
Wide Temperature Tolerant Waterproof Performance of Polyurea Based Hydrophobic Coatings for Application in Cement Concrete
Polymer waterproof coating can effectively prevent rainwater, snow melting agents, and other substances from infiltrating the cement concrete, preventing steel corrosion and freeze–thaw damage. However, the polymer waterproof coatings generally have a short service life, and moisture can still penetrate into the cement concrete, leading to a decrease in the overall life of the cement concrete. This problem increases the safety hazards and maintenance costs of the building, bridge and so on. Here, a novel polyurea‐based hydrophobic coating is prepared, which combines the dual characteristics of the polyurea matrix and hydrophobicity to improve waterproof performance. At the same time, the influence of temperature on the waterproof performance of the polyurea‐based hydrophobic coating is investigated. The results show that the coating exhibits excellent waterproof performance over a wide temperature range from −70°C to 70°C. The mechanism of good waterproof performance is explored and analyzed. These research results provide a theoretical basis and new methods for further designing and preparing high‐performance waterproof coatings for application in cement concrete.
- 2 July 2026
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (36)
Wide Temperature Tolerant Waterproof Performance of Polyurea Based Hydrophobic Coatings for Application in Cement Concrete
Polymer waterproof coating can effectively prevent rainwater, snow melting agents, and other substances from infiltrating the cement concrete, preventing steel corrosion and freeze–thaw damage. However, the polymer waterproof coatings generally have a short service life, and moisture can still penetrate into the cement concrete, leading to a decrease in the overall life of the cement concrete. This problem increases the safety hazards and maintenance costs of the building, bridge and so on. Here, a novel polyurea‐based hydrophobic coating is prepared, which combines the dual characteristics of the polyurea matrix and hydrophobicity to improve waterproof performance. At the same time, the influence of temperature on the waterproof performance of the polyurea‐based hydrophobic coating is investigated. The results show that the coating exhibits excellent waterproof performance over a wide temperature range from −70°C to 70°C. The mechanism of good waterproof performance is explored and analyzed. These research results provide a theoretical basis and new methods for further designing and preparing high‐performance waterproof coatings for application in cement concrete.
- Open Access
- 3 March 2026
- Published by American Chemical Society (ACS) in Polymer Science & Technology
- Vol. 2 (6) , 365-381
Recyclable Photopolymers for Sustainable 3D Printing
The use of photopolymers for 3D printing facilitates high-precision fabrication of geometrically complex structures, offering exceptional dimensional accuracy and rapid curing capabilities that position it as a cornerstone of modern additive manufacturing. However, conventional photopolymers form permanently crosslinked networks, which are resistant to recycling. This inherent limitation generates persistent waste streams that are fundamentally incompatible with circular economy principles. Consequently, the development of recyclable photopolymers that maintain printability while enabling closed-loop material recovery represents a critical Frontier for sustainable manufacturing. Advancing these materials will remain essential for reconciling technological progress with environmental stewardship in the foreseeable future. This review examines recent breakthroughs in recyclable photopolymer systems for 3D printing. First, mainstream photopolymerization techniques compatible with recyclable materials are outlined, followed by an elucidation of core design strategies incorporating chemical depolymerization, thermo-mechanical reprocessing, and noncovalent interactions. Fundamental recycling mechanisms are detailed alongside performance modulation methodologies. Furthermore, emerging applications in soft robotics, wearable devices, and bioelectronic devices where recyclable photopolymers enable multifunctional devices are highlighted. Finally, persistent challenges regarding network durability and recycling efficiency are addressed, and future research directions toward truly sustainable 3D printing are proposed.
- 3 March 2026
- Published by American Chemical Society (ACS) in Polymer Science & Technology
- Vol. 2 (6) , 365-381
Open AccessRecyclable Photopolymers for Sustainable 3D Printing
The use of photopolymers for 3D printing facilitates high-precision fabrication of geometrically complex structures, offering exceptional dimensional accuracy and rapid curing capabilities that position it as a cornerstone of modern additive manufacturing. However, conventional photopolymers form permanently crosslinked networks, which are resistant to recycling. This inherent limitation generates persistent waste streams that are fundamentally incompatible with circular economy principles. Consequently, the development of recyclable photopolymers that maintain printability while enabling closed-loop material recovery represents a critical Frontier for sustainable manufacturing. Advancing these materials will remain essential for reconciling technological progress with environmental stewardship in the foreseeable future. This review examines recent breakthroughs in recyclable photopolymer systems for 3D printing. First, mainstream photopolymerization techniques compatible with recyclable materials are outlined, followed by an elucidation of core design strategies incorporating chemical depolymerization, thermo-mechanical reprocessing, and noncovalent interactions. Fundamental recycling mechanisms are detailed alongside performance modulation methodologies. Furthermore, emerging applications in soft robotics, wearable devices, and bioelectronic devices where recyclable photopolymers enable multifunctional devices are highlighted. Finally, persistent challenges regarding network durability and recycling efficiency are addressed, and future research directions toward truly sustainable 3D printing are proposed.
- Top Cited Papers
- 28 January 2026
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 710, 139993
Macropore engineering of MOF-derived carbon for superior microwave absorption
- 28 January 2026
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 710, 139993
Top Cited PapersMacropore engineering of MOF-derived carbon for superior microwave absorption
- 12 January 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (3) , 5404-5416
A Novel and Effective Strategy for Reducing the Surface Roughness of CIGS Bottom Cells by SAS Annealing in Perovskite/CIGS Tandem Solar Cells
The high surface roughness of CIGS bottom cells is a critical challenge to improve the photoelectric conversion efficiency of perovskite/CIGS tandem solar cells. In this work, a sulfurization after selenization (SAS) annealing process was introduced to reduce the surface roughness of CIGSSe absorbers in CIGS bottom cells. By independently optimizing the H2Se and H2S concentrations during the SAS annealing, the diffusion and distribution of In, Ga, S, and Se were exactly controlled. The individual and synergistic effects of selenization and sulfurization on the elemental diffusion in CIGSSe absorbers, the mechanisms of elemental distribution on the surface roughness of CIGSSe absorbers, and their effects on the performance of CIGSSe solar cells were systematically investigated. The results show that the H2Se concentration during the SAS annealing determines the crystallization and phase formation of CIGSSe absorbers. And the H2S concentration during the SAS annealing affects the diffusion and distribution of In, Ga, S, and Se along the depth direction of CIGSSe absorbers. By optimizing the SAS annealing process, a CIGSSe absorber with excellent crystallinity, low surface roughness, free of secondary phases and fine-grained layers, and a U-shaped bandgap can be obtained. Finally, the surface roughness of CIGSSe absorbers decreases by 58.2%, with the Rq value reduces to 89 nm. The photoelectric conversion efficiency of CIGSSe solar cell based on this absorber increases to 17.0%. This strategy significantly reduces the surface roughness of CIGS bottom cells, providing a critical foundation for high-quality perovskite growth and enabling future efficiency improvements in perovskite/CIGS tandem solar cells.
- 12 January 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (3) , 5404-5416
A Novel and Effective Strategy for Reducing the Surface Roughness of CIGS Bottom Cells by SAS Annealing in Perovskite/CIGS Tandem Solar Cells
The high surface roughness of CIGS bottom cells is a critical challenge to improve the photoelectric conversion efficiency of perovskite/CIGS tandem solar cells. In this work, a sulfurization after selenization (SAS) annealing process was introduced to reduce the surface roughness of CIGSSe absorbers in CIGS bottom cells. By independently optimizing the H2Se and H2S concentrations during the SAS annealing, the diffusion and distribution of In, Ga, S, and Se were exactly controlled. The individual and synergistic effects of selenization and sulfurization on the elemental diffusion in CIGSSe absorbers, the mechanisms of elemental distribution on the surface roughness of CIGSSe absorbers, and their effects on the performance of CIGSSe solar cells were systematically investigated. The results show that the H2Se concentration during the SAS annealing determines the crystallization and phase formation of CIGSSe absorbers. And the H2S concentration during the SAS annealing affects the diffusion and distribution of In, Ga, S, and Se along the depth direction of CIGSSe absorbers. By optimizing the SAS annealing process, a CIGSSe absorber with excellent crystallinity, low surface roughness, free of secondary phases and fine-grained layers, and a U-shaped bandgap can be obtained. Finally, the surface roughness of CIGSSe absorbers decreases by 58.2%, with the Rq value reduces to 89 nm. The photoelectric conversion efficiency of CIGSSe solar cell based on this absorber increases to 17.0%. This strategy significantly reduces the surface roughness of CIGS bottom cells, providing a critical foundation for high-quality perovskite growth and enabling future efficiency improvements in perovskite/CIGS tandem solar cells.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 17 (28) , 2987-3015
UV-curable 3D printing of polydimethylsiloxane elastomers for medical application
UV-curable 3D printing polydimethylsiloxane (PDMS) elastomers has attracted increasing attention due to their exceptional high-temperature resistance, stable chemical properties, and biocompatibility, making them suitable for a wide range of applications...
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 17 (28) , 2987-3015
UV-curable 3D printing of polydimethylsiloxane elastomers for medical application
UV-curable 3D printing polydimethylsiloxane (PDMS) elastomers has attracted increasing attention due to their exceptional high-temperature resistance, stable chemical properties, and biocompatibility, making them suitable for a wide range of applications...
- 13 August 2025
- Published by Wiley in Polymer Composites
- Vol. 47 (3) , 1953-1969
Effect of Annealing on Structure and Mechanical Properties of 3D ‐Printed Polymer Composites
The 3D‐printed polymer composites have shown great potential in various fields, but their mechanical properties have yet to meet the requirements for industrial applications, limiting their widespread use. Annealing treatment has been proven to be an effective method to significantly improve the mechanical properties of 3D‐printed polymer composites. However, the enhancement mechanisms of various annealing methods still require further exploration to achieve the optimal balance between process and performance. This review aims to comprehensively summarize the research progress on annealing treatments to enhance the mechanical properties of 3D‐printed polymer composites over the past decade. It offers a detailed discussion of various annealing methods and their effects on mechanical property enhancement, focusing on the impact of process parameters such as annealing method, temperature, time, and more. Additionally, the relationship between annealing processes, material structure, and mechanical properties is analyzed. This review provides a reference for the design and development of future high‐performance 3D‐printed polymer composites, promoting their advancement in industrial applications.
- 13 August 2025
- Published by Wiley in Polymer Composites
- Vol. 47 (3) , 1953-1969
Effect of Annealing on Structure and Mechanical Properties of 3D ‐Printed Polymer Composites
The 3D‐printed polymer composites have shown great potential in various fields, but their mechanical properties have yet to meet the requirements for industrial applications, limiting their widespread use. Annealing treatment has been proven to be an effective method to significantly improve the mechanical properties of 3D‐printed polymer composites. However, the enhancement mechanisms of various annealing methods still require further exploration to achieve the optimal balance between process and performance. This review aims to comprehensively summarize the research progress on annealing treatments to enhance the mechanical properties of 3D‐printed polymer composites over the past decade. It offers a detailed discussion of various annealing methods and their effects on mechanical property enhancement, focusing on the impact of process parameters such as annealing method, temperature, time, and more. Additionally, the relationship between annealing processes, material structure, and mechanical properties is analyzed. This review provides a reference for the design and development of future high‐performance 3D‐printed polymer composites, promoting their advancement in industrial applications.
- 13 August 2025
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 16 (36) , 4022-4032
Molecular weight regulates reversible adhesion of azopolymers with photoswitchable glass transition temperatures
Molecular weight serves as a critical parameter governing the adhesive properties of polymer adhesives. Nevertheless, its influence on the reversible adhesion of azopolymers exhibiting photoinduced reversible solid-to-liquid transitions remains poorly understood. Here, we systematically elucidate how molecular weight modulates the reversible adhesion behavior of azopolymers. Three azopolymers (P1, P2, and P3) were synthesized by ring-opening metathesis polymerization (ROMP), with molecular weights strategically designed below, near, and above the entanglement molecular weight (Me), respectively. UV irradiation induces trans-to-cis isomerization of azobenzene moieties, while visible light triggers cis-to-trans isomerization. The azopolymers exhibit photoswitchable glass transition temperatures (Tgs) and viscous flow temperatures (Tfs). Crucially, molecular weight dictates the mechanism of photocontrolled reversible adhesion. For P1 and P2, the trans azopolymers exhibit stronger adhesion than the cis form does. However, this trend is reversed for P3, where the cis P3 surpasses trans P3 in terms of adhesive performance. These findings establish molecular weight engineering as a critical strategy for developing high-performance stimuli-responsive reversible adhesives.
- 13 August 2025
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 16 (36) , 4022-4032
Molecular weight regulates reversible adhesion of azopolymers with photoswitchable glass transition temperatures
Molecular weight serves as a critical parameter governing the adhesive properties of polymer adhesives. Nevertheless, its influence on the reversible adhesion of azopolymers exhibiting photoinduced reversible solid-to-liquid transitions remains poorly understood. Here, we systematically elucidate how molecular weight modulates the reversible adhesion behavior of azopolymers. Three azopolymers (P1, P2, and P3) were synthesized by ring-opening metathesis polymerization (ROMP), with molecular weights strategically designed below, near, and above the entanglement molecular weight (Me), respectively. UV irradiation induces trans-to-cis isomerization of azobenzene moieties, while visible light triggers cis-to-trans isomerization. The azopolymers exhibit photoswitchable glass transition temperatures (Tgs) and viscous flow temperatures (Tfs). Crucially, molecular weight dictates the mechanism of photocontrolled reversible adhesion. For P1 and P2, the trans azopolymers exhibit stronger adhesion than the cis form does. However, this trend is reversed for P3, where the cis P3 surpasses trans P3 in terms of adhesive performance. These findings establish molecular weight engineering as a critical strategy for developing high-performance stimuli-responsive reversible adhesives.
- 18 March 2025
- Published by Wiley in Polymer Composites
- Vol. 46 (S1)
Excellent gas barrier property of reduced graphene oxide/nitrile butadiene rubber composite film with high reduced graphene oxide content
A reduced graphene oxide/nitrile butadiene rubber (rGO/NBR) composite membrane with high rGO content is prepared by combining electrostatic self‐assembly and the vacuum filter method for application in gas barrier. In this process, GO induced the formation of chemical cross‐links in NBR in the absence of vulcanization additives, which increased the cross‐link density of the rGO/NBR composite film, and at the same time enhanced the interfacial interactions between the rGO and NBR matrix. The rGO/NBR composite film possesses an intra‐layer isolation network and an inter‐layer orientation structure. The resultant rGO/NBR composites with 40 wt% rGO loading exhibit a dramatically low gas permeability coefficient of 5.87 × 10−17 cm3cm/cm2 s1Pa1, which is reduced by 96.5% compared to the pure NBR. Furthermore, the gas barrier performance of the rGO/NBR composite membrane exhibits favorable thermal stability, in which the permeability coefficient changes very little at 65°C. These good performances are attributed to the dual network structure and strong interface interaction of the rGO/NBR composites. This work provides a new insight into the design and preparation of rGO/rubber composites with high rGO content for various applications.Highlights: A high‐performance rGO/NBR composite with high rGO content was prepared. It shows a dramatically low gas permeability coefficient. It exhibits good thermal stability for gas barrier properties.
- 18 March 2025
- Published by Wiley in Polymer Composites
- Vol. 46 (S1)
Excellent gas barrier property of reduced graphene oxide/nitrile butadiene rubber composite film with high reduced graphene oxide content
A reduced graphene oxide/nitrile butadiene rubber (rGO/NBR) composite membrane with high rGO content is prepared by combining electrostatic self‐assembly and the vacuum filter method for application in gas barrier. In this process, GO induced the formation of chemical cross‐links in NBR in the absence of vulcanization additives, which increased the cross‐link density of the rGO/NBR composite film, and at the same time enhanced the interfacial interactions between the rGO and NBR matrix. The rGO/NBR composite film possesses an intra‐layer isolation network and an inter‐layer orientation structure. The resultant rGO/NBR composites with 40 wt% rGO loading exhibit a dramatically low gas permeability coefficient of 5.87 × 10−17 cm3cm/cm2 s1Pa1, which is reduced by 96.5% compared to the pure NBR. Furthermore, the gas barrier performance of the rGO/NBR composite membrane exhibits favorable thermal stability, in which the permeability coefficient changes very little at 65°C. These good performances are attributed to the dual network structure and strong interface interaction of the rGO/NBR composites. This work provides a new insight into the design and preparation of rGO/rubber composites with high rGO content for various applications.Highlights: A high‐performance rGO/NBR composite with high rGO content was prepared. It shows a dramatically low gas permeability coefficient. It exhibits good thermal stability for gas barrier properties.