Wei Li

High-power mainlobe jamming severely degrades the target-detection capabilities of array radars in complex electromagnetic environments. Although the difference-channel signal can be reused as an auxiliary reference to suppress the jamming component in the sum channel, the jamming component remains unmitigated in the measured difference channel of a three-channel radar without a dedicated difference–difference channel, thereby introducing additional angle-estimation errors. Addressing this, this study analyzes a subarray-level, three-channel monopulse array radar. Based on a one-dimensional uniform linear array and the sum–difference monopulse principle, we formulate a joint model for mainlobe jamming cancellation and angle estimation. We then evaluate how the jammer azimuth, jamming-to-signal ratio (JSR), number of jammers, and radar operating modes (search and tracking) affect the resulting angle error. Simulation results indicate that in search mode, cancellation restores local angle-estimation capabilities near the target direction. When the beam points near the jammer, the jammer approaches the null of the auxiliary difference beam, weakening the reference signal and causing pronounced nonmonotonic distortion in the angle-estimation curve. In tracking mode, the cancellation process yields smaller angle errors and increased stability. A two-element 4.03 GHz anechoic-chamber experiment completes the proof-of-principle validation for the core mechanism under the single-jammer search-mode scenario. These findings define the operational boundaries of using the difference-channel signal as an auxiliary reference for sum-channel jamming cancellation in three-channel radars, providing a theoretical foundation for angle-error compensation, receiving-channel design, and the refinement of interference cancellation techniques.

A metamaterial-inspired varactor-tuned antenna with frequency reconfigurability and pattern diversity is designed. Two different versions of a reconfigurable structure are integrated into a single antenna to excite two different orthogonal patterns, which realizes pattern diversity for MIMO applications. The outer annular Composite Right-/Left-Handed Transmission Line (CRLH-TL) works at the 1 mode and provides a broadside pattern, and the inner circular radiator loaded with split ring resonators (SRR) operates at the 0 mode and radiates an omnidirectional pattern, which realizes pattern diversity. By using surface-mounted varactors, the operating frequencies for the two radiation patterns can be tuned over a wide frequency range, from 1.7 GHz to 2.2 GHz, covering the 1.71–2.17 GHz LTE band, and a low mutual coupling between the two radiators is achieved. The antenna has also been prototyped. The measured results are in good agreement with the simulation results, verifying the proposed concept. The dual-mode MIMO system equipped with the proposed antenna elements is discussed within the context of a 3-D channel model, and it shows a superior array compactness and spectral efficiency (SE) performance compared to scenarios with single-mode elements.

All hydraulic machinery has a tip clearance, which not only produces tip-leakage vortexes (TLVs), but also reduces the energy performance of the machinery. In addition, tip clearance leads to cavitation and attendant vibration and noise. Therefore, investigating tip-leakage cavitating flow and noise characteristics is of great practical importance. In this paper, the energy performance and noise characteristics of NACA0009 hydrofoils with different tip clearance sizes are studied. A large eddy simulation model and Schnerr–Sauer cavitation model are employed to simulate tip-leakage cavitating flow. Additionally, a broadband noise source model and the Ffowcs Williams–Hawkings (FW–H) equation are used to calculate the noise source and far-field radiated noise characteristics, respectively. Results show that the numerical simulation of cavitation vortex and velocity field is in good agreement with the experimental data, illuminating the characteristics of energy performance, flow pattern, cavitation flow, broadband noise source, and near-field and far-field radiated noise. Compared with the original NACA0009 hydrofoil, the tip clearance reduces the noise of the Curle dipole on the hydrofoil surface and Proudman noise around the hydrofoil. Moreover, study of the far-field noise shows that the directivity curve of the overall sound pressure level (SPL) is distributed in a butterfly shape, symmetrically. Evidently, the tip clearance size has a large impact on the energy performance of the hydrofoil, the intensity of the TLV, and the cavitation. This paper lays a solid foundation for further research on cavitation flow in large-scale hydraulic machinery.

Increased demand for higher spectrum efficiency, especially in the space-limited chip, base station, and vehicle environments, has spawned the development of full-duplex communications, which enable the transmitting and receiving to occur simultaneously at the same frequency. The key challenge in this full-duplex communication paradigm is to reduce the self-interference as much as possible, ideally, down to the noise floor. This paper provides a comprehensive review of the self-interference cancellation (SIC) techniques for co-located communication systems from a circuits and fields perspective. The self-interference occurs when the transmitting antenna and the receiving antenna are co-located, which significantly degrade the system performance of the receiver, in terms of the receiver desensitization, signal masking, or even damage of hardwares. By introducing the SIC techniques, the self-interference can be suppressed and the weak desired signal from the remote transmitter can be recovered. This, therefore, enables the full-duplex communications to come into the picture. The SIC techniques are classified into two main categories: the traditional circuit-domain SICs and the novel field-domain SICs, according to the method of how to rebuild and subtract the self-interference signal. In this review paper, the field-domain SIC method is systematically summarized for the first time, including the theoretical analysis and the application remarks. Some typical SIC approaches are presented and the future works are outlooked.

A dual-band dual-polarized massive multiple-input multiple-output (MIMO) antenna array is presented for maritime communications and sensing applications in the 5.1- and 5.9-GHz bands. Passive elements are introduced in the array to achieve a low-gain pattern variation in both bands. The optimal element spacing is studied, relying on the impact of mutual coupling and the radiation performance of the embedded elements. The topology of the MIMO array is also studied based on the system-level performance. The array was prototyped, validating the proposed concept.

A novel wearable button antenna sensor is proposed for the concept of simultaneous wireless information and power transfer (SWIPT). This integrates two working modes for the transfer of power and information, respectively, and optimizes transfer efficiency. An omni-directional radiation pattern is achieved in the 3.5 GHz World Interoperability for Microwave Access (WiMAX) band to support on-body wireless communications, while a circularly polarized broadside radiation pattern is obtained in the 5 GHz wireless local area networks (WLAN) band to harvest power. The measured −10 dB return loss bandwidths are 4.0% (3.47–3.61 GHz) in the lower band, and 25.0% (4.51–5.80 GHz) in the higher band, respectively. An artificial magnetic conductor (AMC) structure with wideband characteristics is applied to obtain a low-profile design and to increase the stability of the antenna sensor. A high radiation efficiency of over 80% in the whole working band is observed. The specific absorption rate (SAR) of the proposed antenna sensor is below 0.509 W/kg at 3.55 GHz, and below 0.0532 W/kg at 5.5 GHz, respectively, which is much lower than the European standard threshold of 2 W/kg. All these characteristics make the designed antenna sensor suitable for on-body information transmission and off-body energy harvesting. The antenna sensor has been prototyped. Simulations and measurements agree well, proving the validity of the new concept.