ZMZeuz Montiel-González

Zeuz Montiel-González

*This is an algorithmically generated author record based on publicly available information.

Zeuz Montiel-González has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Effect of substrate transfer speed on the SILAR deposition of CuS-covellite thin films

    by A. A. Ortiz-Atondo, Z. Montiel-González, A. Mendoza-Galván, D. A. Mazón-Montijo

  • Open Access

    Edificios Inteligentes: ¿Revolución Energética o Ilusión Frente al Cambio Climático?

    by Axel Agustín Ortiz Atondo, Ana Luisa Martínez García, Obed Yamín Ramírez Esquivel, Dalia Alejandra Mazón Montijo, Zeuz Montiel González

    La arquitectura ha evolucionado de refugios rudimentarios a edificios inteligentes que buscan eficiencia energética y sostenibilidad. Estas construcciones incorporan tecnologías y materiales para optimizar el consumo y disminuir el impacto ambiental. Pero, persiste la duda: ¿constituyen una verdadera solución frente a la crisis climática o solo un espejismo? Su efectividad depende de la energía: mientras los combustibles fósiles limitan sus beneficios, la energía solar ofrece una alternativa accesible. En este escenario, los materiales fotoactivos en forma de películas delgadas han transformado el diseño arquitectónico al aprovechar la luz solar para generar electricidad, regular la temperatura y mejorar el confort. Paneles solares de película delgada, óxidos conductores transparentes y vidrios de baja emisividad pueden integrarse en ventanas, fachadas y techos. Así, los edificios inteligentes podrían convertirse en una revolución energética capaz de reducir la huella ambiental, promover el ahorro de recursos y elevar la calidad de vida de sus habitantes.


  • Mechanisms of Phase Evolution in the Cu–Sb–S System Controlled by the Incorporation of Cu in Sb2S3 Thin Films

    by Obed Yamín Ramírez-Esquivel, Zeuz Montiel-González, Andrés M. Garay-Tapia, Maria Camila Barrero-Moreno, Francisco Servando Aguirre-Tostado, Dalia Alejandra Mazón-Montijo

    Ongoing research in metal chalcogenide semiconductors aims to develop alternative materials for optoelectronic devices. However, due to cost and environmental considerations, there is an increasing emphasis on utilizing green materials. This shift toward sustainable materials and processing is expected to become essential in materials research. In this work, we report the microstructural evolution of thin films of the Cu-Sb-S (CAS) system. The films were obtained by annealing amorphous Sb2S3 precursor films previously immersed in a copper solution with variable residence time. Our main findings demonstrate that varying the residence time in immersion together with the annealing and crystallization of the precursor films leads to a controlled incorporation/distribution of Cu into the films, which promotes the formation of films with phases spanning from a mixture between Sb2S3 and CuSbS2 to a pure Cu12Sb4S13 phase, which represents a significant variation in optoelectronic properties. The phase transition mechanisms were investigated using first-principles calculations and correlated with the structural, morphological, and optoelectronic characterization. Results indicate that vacancies serve as nucleation sites for copper incorporation. Subsequently, interstitial sites are occupied during the phase transformation from Sb2S3 to CuSbS2, whereas the transition from CuSbS2 to Cu12Sb4S13 proceeds via a substitutional mechanism. This study contributes to understanding the fundamental phenomena underlying our proposed methodology. These results could promote the development of CAS-based semiconductors with predetermined properties by manipulating simple process parameters, such as the residence time in a copper solution.


  • Saturation degree in dopant monolayers as modulator of Al-doping of ZnO by the Atomic Layer Deposition-supercycle approach

    by Dalia Alejandra Mazón-Montijo, Axel Agustín Ortiz-Atondo, Gerdany Zúñiga-Verdugo, Dagoberto Cabrera-German, Obed Yamín Ramírez-Esquivel, Zeuz Montiel-González


  • Indentation stress–strain analysis and finite element simulation to determine elastoplastic properties of thin films decreasing the substrate contribution

    by U. Jirón‐Lazos, J. R. Pérez‐Higareda, D. A. Mazón‐Montijo, Z. Montiel‐González, D. Torres‐Torres

    The mechanical performance of protective coatings is crucial in daily industrial environments, with transition metal nitrides being among the most commonly used hard coatings for machining tool protection. However, determining their elastoplastic properties via conventional methods can be challenging due to the thickness‐dependent response of film/substrate systems. In this study, we utilised two sputtering Ti‐Al‐N films as a model hard thin film/soft substrate system to showcase an alternative methodology to the Oliver and Pharr method. This alternative approach involves determining Young's modulus, yield stress and hardness through indentation stress–strain curves obtained from nanoindentation tests, effectively decreasing the substrate's contribution. This decrease was corroborated by finite element simulations conducted on films with thickness below 1.0 μm. The elastoplastic properties determined using our methodology fell within the range reported for typical Ti‐Al‐N films. Furthermore, by applying our methodology, we were able to correlate and discuss the observed differences in mechanical behaviour between the two films based solely on their microstructural, compositional and morphological properties. Thus, we have demonstrated a viable alternative methodology to address substrate contribution challenges in the mechanical characterisation of thin film/substrate systems when employing an indenter with a large radius of curvature (~650 nm). This research holds potential implications for the design of protective submicrometric films with industrial applications.


  • Open Access

    Advanced two-objective optimization of thickness and large-area homogeneity of ZnO ultrathin films deposited by atomic layer deposition

    by J. Montalvo-Urquizo, D. A. Mazón-Montijo, A. A. Ortíz-Atondo, A. L. Martínez-García, M. I. Mendivil-Palma, O. Y. Ramírez-Esquivel, Z. Montiel-González

    Semiconductor thin films and coatings have become one of the most relevant research fields due to their significant applications in priority energy-related technologies such as solar cells, photocatalysts, and smart windows. Since all these fields are conceived as tools to fight against the effects of climate change, a real impact requires the successful deposition of semiconductor films on large-area substrates such as windows, panels, pipes, and containers, to give rise to photoactive components suitable for buildings, industries, cars, and parks. However, scalability remains one of the major issues in almost all methodologies known for the deposition of semiconductor films, irrespective of the phase approach used, i.e., either from vapor- or liquid-phase. Here, a mathematical metamodel was applied to simulate the atomic layer deposition (ALD) of zinc oxide (ZnO) ultrathin films (a versatile photoactive material in energy-related research) and optimized their thickness and homogeneity over the whole area of 8 in.-diameter Si wafers. Knowing all ALD parameters that define the quality and properties of the deposited films, we delimitated a set of four metamodel-inputs (zinc precursor dose, purge, and the inner and outer carrier gas flows) based on literature review, expertise, costs, and reactor design aspects specific to the deposition of ZnO. The average thickness and homogeneity of the films were established as the two outputs of the metamodel, which were the object of optimization. Using advanced iterative procedures, we carried out three rounds of experiments that lead us to a set of ALD parameters to deposit a ZnO ultrathin film with an average thickness of 11.38 nm that leads to a deposition rate of 1.9 Å/cycle, which represents 90% of the highest reported value for ZnO by ALD (2.1 Å/cycle). The homogeneity over the whole 8 in.-diameter wafer reached 2.61 nm, which represents the smoothest distribution of thickness values in the entire deposited area. Given the origin of the limits constraining this optimization procedure, our results hold promise in supporting the transition from the laboratory-level synthesis of thin-film-based optoelectronic devices to their large-scale production. This could ultimately help to circumvent the difficulties faced in scaling the ALD technology and enable alternative deposition methodologies such as thermal ALD, otherwise inaccessible to the production chain.


  • Microstructural behavior of the Ti–Al–Mo–N system controlled by Mo content: impact on the performance as hard coatings

    by Uriel Jirón-Lazos, Sandra E. Rodil, Dalia Alejandra Mazón-Montijo, José Raúl Pérez-Higareda, David Torres-Torres, Andrés Manuel Garay-Tapia, Zeuz Montiel-González


  • ¡A limpiar agua con óxidos! Química de materiales al servicio del medio ambiente

    by Ana Luisa Martínez García, Zeuz Montiel González, Obed Yamín Ramírez Esquivel, Dalia Alejandra Mazón Montijo

    En este artículo se aborda un tema de interés global: la descontaminación del agua a través de la acción de fotocatalizadores. Actualmente, existen contaminantes persistentes en casi todos los recursos hídricos del mundo que no pueden limpiarse con tratamientos convencionales, principalmente debido a su alta estabilidad química. Por ello, se recurre a procesos avanzados tales como la fotocatálisis, donde un material conocido como fotocatalizador es el actor principal. Sin embargo, los procesos fotocatalíticos aún están lejos de alcanzar su máxima eficiencia, por lo que la búsqueda de métodos alternativos para el mejoramiento del desempeño es una preocupación vigente, sobre todo considerando el aprovechamiento de la luz del Sol y en la forma en que se ponen en contacto el fotocatalizador y el agua contaminada. Con la ayuda de la química de materiales, te contamos cómo es que capas delgadas de unos óxidos tan comunes el óxido de hierro y óxido de zinc podrían funcionar como un fotocatalizador con alto potencial para descontaminar el agua de una manera más eficiente y con el menor impacto al ambiente.

  • Broad and nearly white photoluminescence induced by the nitrogen incorporation in Si/SiOxNy multilayers

    by B. Palacios–Márquez, K.E. González–Flores, S.A. Pérez-García, Z. Montiel-González, M. Moreno, A. Torres, J. Flores–Méndez, A. Morales–Sánchez