Qing Guo
Qing Guo has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Kan Qin
School of Marine Science and Technology, Northwestern Polytechnical University, Xi’an 710072, China
2 shared publications - Chuang Huang
School of Marine Science and Technology, Northwestern Polytechnical University, Xi’an 710072, China
1 shared publication - Daijin Li
School of Marine Science and Technology, Northwestern Polytechnical University, Xi’an 710072, China
1 shared publication Jianan Zhang
1 shared publicationJianyong Wang
1 shared publication- Kai Luo
Northwestern Polytechnical University School of Marine Science and Technology Xi’an, Shaanxi 710072 , China
1 shared publication
Latest Publications
- Open Access
Experimental Investigation and Numerical Validation of a Roots Pump’s Performance Operating with Gas-Liquid Mixtures
To facilitate the high operating pressure of a novel underwater power cycle, the potential of Roots pumps for pressurizing gas-liquid mixtures is experimentally investigated in this paper. The experimental facility is constructed, and the effects of inlet gas volume fractions and rotational speeds on the pump performance are discussed. The results show that the increased inlet gas volume fraction is beneficial to increasing the pump efficiency. This is associated with the increased pressure ratio and the gas-liquid mixture compressibility. In addition, the increases in rotational speed and liquid phase volume fraction negatively affect the pump’s efficiency. These phenomena are caused by the resulting high pressure difference and subsequently the back-flow from the pump outlet, thereby increasing the gap leakage and decreasing the Roots pump’s operating efficiency. The numerical model is further compared against experimental resultsk and the maximum difference is found to be less than 7.53%. This paper experimentally tests the potential of Roots pumps for pressurizing gas-liquid mixtures.
Open AccessExperimental Investigation and Numerical Validation of a Roots Pump’s Performance Operating with Gas-Liquid Mixtures
To facilitate the high operating pressure of a novel underwater power cycle, the potential of Roots pumps for pressurizing gas-liquid mixtures is experimentally investigated in this paper. The experimental facility is constructed, and the effects of inlet gas volume fractions and rotational speeds on the pump performance are discussed. The results show that the increased inlet gas volume fraction is beneficial to increasing the pump efficiency. This is associated with the increased pressure ratio and the gas-liquid mixture compressibility. In addition, the increases in rotational speed and liquid phase volume fraction negatively affect the pump’s efficiency. These phenomena are caused by the resulting high pressure difference and subsequently the back-flow from the pump outlet, thereby increasing the gap leakage and decreasing the Roots pump’s operating efficiency. The numerical model is further compared against experimental resultsk and the maximum difference is found to be less than 7.53%. This paper experimentally tests the potential of Roots pumps for pressurizing gas-liquid mixtures.
- Open Access
- 21 January 2022
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 31
Forced condensation heat transfer characteristics of vapour in the presence of noncondensable gas in horizontal tubes operating at high pressures
- 21 January 2022
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 31
Open AccessForced condensation heat transfer characteristics of vapour in the presence of noncondensable gas in horizontal tubes operating at high pressures
- Open Access
Effect of Operating Conditions on the Performance of Gas–Liquid Mixture Roots Pumps
The performance of the gas–liquid mixture Roots pump at different operating conditions is investigated in this paper. The pump efficiency was first increased from 48% to 64%, and then decreased to 59% with the increased inlet CO2 volume fraction (from 0.8 to 1). The increased rotational speed (from 1000 rpm to 4000 rpm) and pressure ratio (from 2 to 10) can lead to a reduction in the pump’s efficiency from 67% to 43% and from 48% to 33%, respectively. The variation in the pump’s efficiency is affected by the volumetric efficiency and the flow efficiency simultaneously. The high pressure and the CO2 volume fraction in the outlet zone can increase the leakage, leading to a reduction in the volumetric efficiency. The flow efficiency decreases with the increase in the local pressure at the outlet zone and the backflow density. The outlet zone pressure can also affect the fluid properties by changing the density of the gas phase. Therefore, the combined effect of the outlet zone pressure and the working fluid properties is considered to be the main factor affecting the performance. This paper further explores the suitability of Roots pumps for compressing gas–liquid mixtures.
Open AccessEffect of Operating Conditions on the Performance of Gas–Liquid Mixture Roots Pumps
The performance of the gas–liquid mixture Roots pump at different operating conditions is investigated in this paper. The pump efficiency was first increased from 48% to 64%, and then decreased to 59% with the increased inlet CO2 volume fraction (from 0.8 to 1). The increased rotational speed (from 1000 rpm to 4000 rpm) and pressure ratio (from 2 to 10) can lead to a reduction in the pump’s efficiency from 67% to 43% and from 48% to 33%, respectively. The variation in the pump’s efficiency is affected by the volumetric efficiency and the flow efficiency simultaneously. The high pressure and the CO2 volume fraction in the outlet zone can increase the leakage, leading to a reduction in the volumetric efficiency. The flow efficiency decreases with the increase in the local pressure at the outlet zone and the backflow density. The outlet zone pressure can also affect the fluid properties by changing the density of the gas phase. Therefore, the combined effect of the outlet zone pressure and the working fluid properties is considered to be the main factor affecting the performance. This paper further explores the suitability of Roots pumps for compressing gas–liquid mixtures.