Hao Bai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Hao Bai has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Fujian Zhou
State Key Laboratory of Petroleum Resources and Engineering, China University of Petroleum, Beijing 102249, China
8 shared publications - Erdong Yao
China University of Petroleum at Beijing
7 shared publications - Hang Xu
SINOPEC Petroleum Exploration and Production Research Institute Beijing China
3 shared publications Zhiyuan Ding
3 shared publicationsErdong Yao
2 shared publicationsFuyuan Li
2 shared publications
Latest Publications
- Open Access
- 5 October 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (41) , 63579-63594
Formation Mechanism and Semi-Quantitative Threshold Assessment of Metal-Induced Gel-like Agglomerate Blockages in Slickwater Fracturing Fluids
The reuse of flowback water in slickwater fracturing can introduce elevated concentrations of dissolved metal ions, intensifying the incompatibility between polyacrylamide-based friction reducers and multivalent metal ions and promoting the formation of rubbery gel-like agglomerates, commonly referred to as “gummy bears”. These agglomerates can adversely affect flowback, surface fluid handling, and well productivity. In this study, field sample characterization and laboratory simulation are combined to investigate the composition and formation mechanism of such gel-like agglomerates. The results show that these materials are not simple polymer residues, but polymer–inorganic composites composed of polyacrylamide components, metal ions, and inorganic particles, with Fe3+ and Al3+ playing a particularly important role in their formation. Furthermore, a molar-ratio-based semiquantitative method is introduced to describe the relationship between metal-ion loading and effective polymer reactive sites, and to predict the threshold for gel-like agglomeration. The results improve the understanding of polymer–metal incompatibility under flowback water conditions and provide practical guidance for risk evaluation, fluid design, and mitigation of gummy-bear formation in field operations.
- 5 October 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (41) , 63579-63594
Open AccessFormation Mechanism and Semi-Quantitative Threshold Assessment of Metal-Induced Gel-like Agglomerate Blockages in Slickwater Fracturing Fluids
The reuse of flowback water in slickwater fracturing can introduce elevated concentrations of dissolved metal ions, intensifying the incompatibility between polyacrylamide-based friction reducers and multivalent metal ions and promoting the formation of rubbery gel-like agglomerates, commonly referred to as “gummy bears”. These agglomerates can adversely affect flowback, surface fluid handling, and well productivity. In this study, field sample characterization and laboratory simulation are combined to investigate the composition and formation mechanism of such gel-like agglomerates. The results show that these materials are not simple polymer residues, but polymer–inorganic composites composed of polyacrylamide components, metal ions, and inorganic particles, with Fe3+ and Al3+ playing a particularly important role in their formation. Furthermore, a molar-ratio-based semiquantitative method is introduced to describe the relationship between metal-ion loading and effective polymer reactive sites, and to predict the threshold for gel-like agglomeration. The results improve the understanding of polymer–metal incompatibility under flowback water conditions and provide practical guidance for risk evaluation, fluid design, and mitigation of gummy-bear formation in field operations.
- 1 July 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (7)
Crude oil mobilization enhanced by nano-emulsion in the full fracturing process for tight oil reservoirs
The Chang 8 tight sandstone reservoir in the Ordos Basin is primarily developed using a nano-variable-viscosity fracturing fluid. However, the contribution of the fracturing fluid to crude oil mobilization and the mechanisms of oil–water interaction during the three stages of “fracturing–soaking–flowback” remains unclear. A full-process simulation device for “fracturing–soaking–flowback” is constructed based on nuclear magnetic resonance technology. Two types of crude oil mobilization fracturing fluids, nano-amphiphile and nano-emulsion, are compared and studied. Quantitative analysis of the distribution and changes of crude oil in core pores at different stages leads to the development of a new technology for calculating oil–water relative permeability. Results indicate that: (1) Rapid wettability modification by nano-emulsions enhances sweep efficiency, imbibition displacement, and flowback efficiency, increasing the total oil recovery factor to 87.71%. (2) A particle size of approximately 10 nm facilitates crude oil mobilization in nanopores. (3) Relative permeability movement, driven by rock wettability modification, is a key mechanism for enhanced oil recovery with residual oil saturation reduced to about 7% during the flowback stage. (4) A decrease in the degree of emulsification between the fracturing fluid and crude oil may also significantly improve crude oil mobilization. This study provides a scientific foundation for optimizing fracturing development and oil mobilization processes in tight oil reservoirs.
- 1 July 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (7)
Crude oil mobilization enhanced by nano-emulsion in the full fracturing process for tight oil reservoirs
The Chang 8 tight sandstone reservoir in the Ordos Basin is primarily developed using a nano-variable-viscosity fracturing fluid. However, the contribution of the fracturing fluid to crude oil mobilization and the mechanisms of oil–water interaction during the three stages of “fracturing–soaking–flowback” remains unclear. A full-process simulation device for “fracturing–soaking–flowback” is constructed based on nuclear magnetic resonance technology. Two types of crude oil mobilization fracturing fluids, nano-amphiphile and nano-emulsion, are compared and studied. Quantitative analysis of the distribution and changes of crude oil in core pores at different stages leads to the development of a new technology for calculating oil–water relative permeability. Results indicate that: (1) Rapid wettability modification by nano-emulsions enhances sweep efficiency, imbibition displacement, and flowback efficiency, increasing the total oil recovery factor to 87.71%. (2) A particle size of approximately 10 nm facilitates crude oil mobilization in nanopores. (3) Relative permeability movement, driven by rock wettability modification, is a key mechanism for enhanced oil recovery with residual oil saturation reduced to about 7% during the flowback stage. (4) A decrease in the degree of emulsification between the fracturing fluid and crude oil may also significantly improve crude oil mobilization. This study provides a scientific foundation for optimizing fracturing development and oil mobilization processes in tight oil reservoirs.
- 1 November 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (11)
Study on combination of surfactant and acid for depressure and increasing injection oil displacement in heterogeneous sandstone reservoirs
This study addresses the challenges faced by unconventional tight sandstone reservoirs, including low porosity, permeability, high clay content, and complex wettability, which lead to increased flow resistance and injection pressures. The research aims to optimize depressure and increasing injection methods by investigating the effects of various two-phase and three-phase displacement systems, employing experimental treatments including acids, alkalis, and surfactants. Nuclear magnetic resonance, computed tomography, scanning electron microscopy, inductively coupled plasma, and wettability tests are utilized to investigate the mechanisms of these treatments. Key findings indicate that weak alkaline ethylenediaminetetraacetate tetrasodium and weak acids like hydroxyethylidene diphosphonic acid and acetic acid can cause significant pore blockage, while hydrochloric acid can dissolve pore minerals, achieves a high depressure rate of 89.42%. Although surfactants exhibit a negative effect in two-phase displacement systems, they demonstrate considerable potential in three-phase displacement. Surfactants can modify the wettability of rock surfaces, reduce oil saturation, and improve water phase permeability, resulting in a depressure rate of 11.68%. Notably, the combination of surfactants and HCl enhances the depressure rate to 60.82% and improves oil displacement efficiency from 26.12% to 57.96%. The optimal formulation identified is “0.5% unconventional agent (CNI-A) +3% HCl,” which improves oil displacement capacity and alleviates injection pressure, providing valuable insights for the management of heterogeneous sandstone reservoirs.
- 1 November 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (11)
Study on combination of surfactant and acid for depressure and increasing injection oil displacement in heterogeneous sandstone reservoirs
This study addresses the challenges faced by unconventional tight sandstone reservoirs, including low porosity, permeability, high clay content, and complex wettability, which lead to increased flow resistance and injection pressures. The research aims to optimize depressure and increasing injection methods by investigating the effects of various two-phase and three-phase displacement systems, employing experimental treatments including acids, alkalis, and surfactants. Nuclear magnetic resonance, computed tomography, scanning electron microscopy, inductively coupled plasma, and wettability tests are utilized to investigate the mechanisms of these treatments. Key findings indicate that weak alkaline ethylenediaminetetraacetate tetrasodium and weak acids like hydroxyethylidene diphosphonic acid and acetic acid can cause significant pore blockage, while hydrochloric acid can dissolve pore minerals, achieves a high depressure rate of 89.42%. Although surfactants exhibit a negative effect in two-phase displacement systems, they demonstrate considerable potential in three-phase displacement. Surfactants can modify the wettability of rock surfaces, reduce oil saturation, and improve water phase permeability, resulting in a depressure rate of 11.68%. Notably, the combination of surfactants and HCl enhances the depressure rate to 60.82% and improves oil displacement efficiency from 26.12% to 57.96%. The optimal formulation identified is “0.5% unconventional agent (CNI-A) +3% HCl,” which improves oil displacement capacity and alleviates injection pressure, providing valuable insights for the management of heterogeneous sandstone reservoirs.
- 1 March 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (3)
Development and performance evaluation of nonionic surfactant-stabilized nanoemulsion for enhanced oil recovery applications in tight reservoir
Nanoemulsions have garnered great attention as a chemical additive for enhanced oil recovery (EOR) technology worldwide due to their small size and unique physicochemical properties. Herein, this work introduces a novel nonionic surfactant-stabilized nanoemulsion prepared using a low-energy method for EOR projects in the Chang 8 tight reservoir. Spontaneous imbibition experiments were conducted in oil-saturated cores, and secondary imbibition experiments were carried out in water-bearing cores. Additionally, core flooding experiments were performed to study the EOR performance of both nanoemulsion and complex surfactant. Finally, the EOR mechanisms were thoroughly investigated, specifically focusing on oil-washing capacity, reduced interfacial tension, and wettability alteration. The designed nanoemulsion, with droplets averaging 10.5 ± 0.7 nm in synthetic formation brine at ambient temperature, exhibits excellent thermal and long-term stability even under reservoir temperature conditions. The oil recovery efficiency of the nanoemulsion system in oil-saturated cores through spontaneous imbibition was 31.28%, representing a 6.42% improvement over the complex surfactant solution. In the secondary imbibition experiments, the nanoemulsion mobilized 8.53% of the residual oil, compared to 4.11% for the complex surfactant. Core flooding experiments revealed that the nanoemulsion system achieved a total oil recovery of 62.69%, outperforming the complex surfactant system by 8.68% during the chemical flooding stage and 1.82% during the subsequent brine flooding stage. The EOR mechanisms of nanoemulsion in tight reservoirs can be attributed to four aspects: reduction of oil/water interfacial tension, wettability alteration, miscibility with crude oil, and increased sweep volume. The generation of the Marangoni effect and the adsorption and diffusion characteristics are essential differences between the nanoemulsion system and the complex surfactant system. The presented findings in this paper could aid in promoting the large-scale use of nanoemulsions in Chang 8 tight reservoirs.
- 1 March 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (3)
Development and performance evaluation of nonionic surfactant-stabilized nanoemulsion for enhanced oil recovery applications in tight reservoir
Nanoemulsions have garnered great attention as a chemical additive for enhanced oil recovery (EOR) technology worldwide due to their small size and unique physicochemical properties. Herein, this work introduces a novel nonionic surfactant-stabilized nanoemulsion prepared using a low-energy method for EOR projects in the Chang 8 tight reservoir. Spontaneous imbibition experiments were conducted in oil-saturated cores, and secondary imbibition experiments were carried out in water-bearing cores. Additionally, core flooding experiments were performed to study the EOR performance of both nanoemulsion and complex surfactant. Finally, the EOR mechanisms were thoroughly investigated, specifically focusing on oil-washing capacity, reduced interfacial tension, and wettability alteration. The designed nanoemulsion, with droplets averaging 10.5 ± 0.7 nm in synthetic formation brine at ambient temperature, exhibits excellent thermal and long-term stability even under reservoir temperature conditions. The oil recovery efficiency of the nanoemulsion system in oil-saturated cores through spontaneous imbibition was 31.28%, representing a 6.42% improvement over the complex surfactant solution. In the secondary imbibition experiments, the nanoemulsion mobilized 8.53% of the residual oil, compared to 4.11% for the complex surfactant. Core flooding experiments revealed that the nanoemulsion system achieved a total oil recovery of 62.69%, outperforming the complex surfactant system by 8.68% during the chemical flooding stage and 1.82% during the subsequent brine flooding stage. The EOR mechanisms of nanoemulsion in tight reservoirs can be attributed to four aspects: reduction of oil/water interfacial tension, wettability alteration, miscibility with crude oil, and increased sweep volume. The generation of the Marangoni effect and the adsorption and diffusion characteristics are essential differences between the nanoemulsion system and the complex surfactant system. The presented findings in this paper could aid in promoting the large-scale use of nanoemulsions in Chang 8 tight reservoirs.
- Open Access
- 22 February 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (9) , 10886-10896
Mechanism of Salt Precipitation Blockage in Low-Producing Gas Wells and the Method of Acidification Blockage Removal
In the Changqing area, over 23.6% of gas wells produce less than 0.1 × 104 m3/d of gas daily, posing a challenge to gas field sustainability. Laboratory analysis of scale samples from three wells and formation water analysis via inductively coupled plasma revealed soluble salt as the primary well blockage, with sodium chloride and calcium chloride comprising 48.0–81.2% of total content. The G3# well blockage contains a small amount of quartz from acid-insoluble components of carbonate acidification. Formation water from all wells exhibited high salinity (up to 153 g/L) with a calcium chloride water type. Scanning electron microscopy and EDS confirmed halite and quartz features in blockage samples. Theoretical calculations show salt crystallization when tubing pressure falls below 10 MPa and daily water production is 90%, and water >85%, making them suitable removal agents. For 3# blockage, mud acid with >80% dissolution is recommended. Chemical methods effectively clean the wellbore and formation. Optimized blockage removal measures increase tubing pressure and daily production by 2.18 and 4.05 times, respectively. This study offers insights into addressing well blockage challenges in low-producing gas wells.
- 22 February 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (9) , 10886-10896
Open AccessMechanism of Salt Precipitation Blockage in Low-Producing Gas Wells and the Method of Acidification Blockage Removal
In the Changqing area, over 23.6% of gas wells produce less than 0.1 × 104 m3/d of gas daily, posing a challenge to gas field sustainability. Laboratory analysis of scale samples from three wells and formation water analysis via inductively coupled plasma revealed soluble salt as the primary well blockage, with sodium chloride and calcium chloride comprising 48.0–81.2% of total content. The G3# well blockage contains a small amount of quartz from acid-insoluble components of carbonate acidification. Formation water from all wells exhibited high salinity (up to 153 g/L) with a calcium chloride water type. Scanning electron microscopy and EDS confirmed halite and quartz features in blockage samples. Theoretical calculations show salt crystallization when tubing pressure falls below 10 MPa and daily water production is 90%, and water >85%, making them suitable removal agents. For 3# blockage, mud acid with >80% dissolution is recommended. Chemical methods effectively clean the wellbore and formation. Optimized blockage removal measures increase tubing pressure and daily production by 2.18 and 4.05 times, respectively. This study offers insights into addressing well blockage challenges in low-producing gas wells.
- Open Access
- 1 January 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (1)
The mobilization mechanism of low oil saturation reservoirs
After fracturing with a guar fluid system in Chang 8 oil reservoir, some wells have high oil production, and some have low production and even only produce water. Therefore, a comparative study is carried out in oil-producing and water-producing wells. The results show that: ① Organic wax adsorbed in oil-producing and water-producing well core pores accounts for 95.39% and 56.67%, respectively, making wells strong oil-wet. A certain proportion of inorganic salts and some other oil-wet organic compounds exist in water-producing wells. ② Under the reservoir conditions, the oil wettability of the water-producing well core is strong, and its original formation wettability is also oil-wet. The original wettability of the oil-producing well formation is water-wet, with oil production capacity. ③ The core residual oil saturation using the guar fluid is 24.7%–29.87%. This results in no oil phase permeability or difficulty to mobilize oil in most oil reservoirs. ④ Forced displacement can mobilize oil in large pores and has a significant effect in producing well, with mobilization efficiency of 53.49%. This article elucidates the wettability formation and crude oil mobilization mechanism of two types of wells, providing direction for the development of this type of reservoir.
- 1 January 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (1)
Open AccessThe mobilization mechanism of low oil saturation reservoirs
After fracturing with a guar fluid system in Chang 8 oil reservoir, some wells have high oil production, and some have low production and even only produce water. Therefore, a comparative study is carried out in oil-producing and water-producing wells. The results show that: ① Organic wax adsorbed in oil-producing and water-producing well core pores accounts for 95.39% and 56.67%, respectively, making wells strong oil-wet. A certain proportion of inorganic salts and some other oil-wet organic compounds exist in water-producing wells. ② Under the reservoir conditions, the oil wettability of the water-producing well core is strong, and its original formation wettability is also oil-wet. The original wettability of the oil-producing well formation is water-wet, with oil production capacity. ③ The core residual oil saturation using the guar fluid is 24.7%–29.87%. This results in no oil phase permeability or difficulty to mobilize oil in most oil reservoirs. ④ Forced displacement can mobilize oil in large pores and has a significant effect in producing well, with mobilization efficiency of 53.49%. This article elucidates the wettability formation and crude oil mobilization mechanism of two types of wells, providing direction for the development of this type of reservoir.
- 29 November 2023
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 29 (03) , 1321-1336
Experimental Research on the Proppant Settling and Transport Characteristics of Silica Gel-Based Fracturing Fluid
Summary: Hydraulic fracturing is an effective stimulation method to establish high-conductivity channels in tight reservoirs, and the effectiveness of man-made fractures largely depends on the proppant-carrying capacity of the fracturing fluids used. As a novel completion fluid, silica gel-based fracturing fluids have shown desirable stimulation effect in application cases, but a comprehensive evaluation of their proppant settling and transport behaviors in the laboratory remains lacking. In this paper, a silica gel-based fracturing fluid was prepared first, and then the rheological properties, including shear thinning, recovery behavior, and viscoelasticity of the fluid system, were measured. Afterward, the settling velocity of single-particle proppant and the settling rate of multiparticle proppant under various experimental conditions were investigated in the static fluid system; in addition, the dynamic proppant-carrying performance was evaluated using a visualized rough fracture model to study different factors on the dune distribution inside the fractures. Lastly, the proppant-carrying mechanism of silica gel-based fracturing fluid was revealed in three aspects. The rheological test result showed that the shear viscosity of silica gel-based fracturing fluid increased as the SiO2 concentration increased. Furthermore, all tested fluid samples exhibited an elastic modulus that is consistently greater than the viscous modulus, indicating that the silica gel-based fracturing fluid system has a dominant elastic response behavior. In the single-particle static settling test, there was a significant increase in the settling velocities as the particle diameter increased and as the temperature increased. Meanwhile, the settling rate of multiparticles showed a decreasing trend with the increase in mesh size, while the proppant settling rate gradually increased as the proppant concentration rose. The results of dynamic proppant-carrying experiments demonstrate that a higher pumping rate leads to an extended migration distance for proppant, resulting in formed sand dunes with reduced height within fractures. Conversely, an increase in proppant concentration and a reduction in mesh size tend to form higher sand dunes. The proppant-carrying mechanisms of the silica gel-based fracturing fluid relate to the self-polymerization and syneresis of silica gel, the noticeable elasticity characteristics, and the structural encapsulation effect formed between silica gel and proppant. A better understanding of the proppant settling and transport behaviors of silica gel-based fracturing fluid can be helpful in optimizing the hydraulic fracturing design and promoting field application.
- 29 November 2023
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 29 (03) , 1321-1336
Experimental Research on the Proppant Settling and Transport Characteristics of Silica Gel-Based Fracturing Fluid
Summary: Hydraulic fracturing is an effective stimulation method to establish high-conductivity channels in tight reservoirs, and the effectiveness of man-made fractures largely depends on the proppant-carrying capacity of the fracturing fluids used. As a novel completion fluid, silica gel-based fracturing fluids have shown desirable stimulation effect in application cases, but a comprehensive evaluation of their proppant settling and transport behaviors in the laboratory remains lacking. In this paper, a silica gel-based fracturing fluid was prepared first, and then the rheological properties, including shear thinning, recovery behavior, and viscoelasticity of the fluid system, were measured. Afterward, the settling velocity of single-particle proppant and the settling rate of multiparticle proppant under various experimental conditions were investigated in the static fluid system; in addition, the dynamic proppant-carrying performance was evaluated using a visualized rough fracture model to study different factors on the dune distribution inside the fractures. Lastly, the proppant-carrying mechanism of silica gel-based fracturing fluid was revealed in three aspects. The rheological test result showed that the shear viscosity of silica gel-based fracturing fluid increased as the SiO2 concentration increased. Furthermore, all tested fluid samples exhibited an elastic modulus that is consistently greater than the viscous modulus, indicating that the silica gel-based fracturing fluid system has a dominant elastic response behavior. In the single-particle static settling test, there was a significant increase in the settling velocities as the particle diameter increased and as the temperature increased. Meanwhile, the settling rate of multiparticles showed a decreasing trend with the increase in mesh size, while the proppant settling rate gradually increased as the proppant concentration rose. The results of dynamic proppant-carrying experiments demonstrate that a higher pumping rate leads to an extended migration distance for proppant, resulting in formed sand dunes with reduced height within fractures. Conversely, an increase in proppant concentration and a reduction in mesh size tend to form higher sand dunes. The proppant-carrying mechanisms of the silica gel-based fracturing fluid relate to the self-polymerization and syneresis of silica gel, the noticeable elasticity characteristics, and the structural encapsulation effect formed between silica gel and proppant. A better understanding of the proppant settling and transport behaviors of silica gel-based fracturing fluid can be helpful in optimizing the hydraulic fracturing design and promoting field application.
- 25 June 2023
- Published by The American Rock Mechanics Association
Enhanced Imbibition Through Wettability Alteration During Shut-In Treatment After Hydraulic Fracturing
Tight oil reservoirs are characteristic of low porosity and permeability, complex pore-throat network, and typically oil-wet, which results in a low oil recovery rate of less than 10%. Surfactant can alter the rock wettability while maintaining an ultralow adsorption rate on rock surface, and thus can be a promising method to enhance the oil recovery. This paper uses the numerical simulation method to understand how shut-in pressure affects the imbibition of fracturing fluid when rock wettability changes. Results show that wettability has a great influence on water imbibition depth of fracturing fluid and the change of water saturation at the invasion front. There is a positive correlation between the imbibition rate and the water-oil interfacial tension in a water-wet reservoir, but a negative correlation in an oil-wet reservoir. In water-wet reservoirs, when the shut-in pressure keeps the same, the water imbibition rate is linear to sqrt (K/ϕ), and increases with the interfacial tension. When the oil-wet reservoir is altered to water-wet, although the water imbibition rate is reduced by 37%, water saturation in the invasion front significantly increases from 0%-1.75% to 8%-15%, resulting in an enhanced water imbibition efficiency of 6.25% to 15%. INTRODUCTION: Abundant oil and gas resources are present in tight reservoir formations, which are widely distributed all over the world. Tight reservoirs have small pore radius, few effective pores, and complicated pore throats with abundant microfractures[1]. In this kind of reservoir, the traditional water flooding method is difficult to achieve the effective use of crude oil. Hydraulic fracture is needed to improve the conductivity of the matrix[2]. Research and practice indicate imbibition flooding can significantly improve recovery in fractured tight reservoirs[3]. In general, imbibition refers to the spontaneous entry of the wetting-phase fluid into the pore throat of the rock under the action of capillary forces, displacing the non-wetting phase fluid in the pores[4]. To study the imbibition characteristics and imbibition displacement mechanism of tight reservoir can provide an effective method for improving the recovery efficiency of tight reservoir.
- 25 June 2023
- Published by The American Rock Mechanics Association
Enhanced Imbibition Through Wettability Alteration During Shut-In Treatment After Hydraulic Fracturing
Tight oil reservoirs are characteristic of low porosity and permeability, complex pore-throat network, and typically oil-wet, which results in a low oil recovery rate of less than 10%. Surfactant can alter the rock wettability while maintaining an ultralow adsorption rate on rock surface, and thus can be a promising method to enhance the oil recovery. This paper uses the numerical simulation method to understand how shut-in pressure affects the imbibition of fracturing fluid when rock wettability changes. Results show that wettability has a great influence on water imbibition depth of fracturing fluid and the change of water saturation at the invasion front. There is a positive correlation between the imbibition rate and the water-oil interfacial tension in a water-wet reservoir, but a negative correlation in an oil-wet reservoir. In water-wet reservoirs, when the shut-in pressure keeps the same, the water imbibition rate is linear to sqrt (K/ϕ), and increases with the interfacial tension. When the oil-wet reservoir is altered to water-wet, although the water imbibition rate is reduced by 37%, water saturation in the invasion front significantly increases from 0%-1.75% to 8%-15%, resulting in an enhanced water imbibition efficiency of 6.25% to 15%. INTRODUCTION: Abundant oil and gas resources are present in tight reservoir formations, which are widely distributed all over the world. Tight reservoirs have small pore radius, few effective pores, and complicated pore throats with abundant microfractures[1]. In this kind of reservoir, the traditional water flooding method is difficult to achieve the effective use of crude oil. Hydraulic fracture is needed to improve the conductivity of the matrix[2]. Research and practice indicate imbibition flooding can significantly improve recovery in fractured tight reservoirs[3]. In general, imbibition refers to the spontaneous entry of the wetting-phase fluid into the pore throat of the rock under the action of capillary forces, displacing the non-wetting phase fluid in the pores[4]. To study the imbibition characteristics and imbibition displacement mechanism of tight reservoir can provide an effective method for improving the recovery efficiency of tight reservoir.
- Open Access
- 4 April 2022
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 7 (15) , 12570-12579
High-Temperature-Resistant, Low-Concentration Water-Controlling Composite Cross-Linked Polyacrylamide Weak Gel System Prepared from Oilfield Sewage
The polyacrylamide weak gel is an effective system to block a high-permeability layer, realize water control, and enhance oil recovery. However, its application is limited by poor temperature resistance and high polymer dosage. In this paper, an inorganic–organic composite cross-linking agent was synthesized by using Cr(III) and phenolic resin. The composite cross-linking agent can cross-link low concentrations of polyacrylamide to obtain a high-temperature-resistant weak gel system in oilfield sewage. By adjusting the ratio of Cr(III), phenolic resin, and polyacrylamide, an optimum formula MF-7 can be obtained according to the gel strength. Results from evaluation experiments show that the strength of MF-7 can reach H grade even at polyacrylamide concentrations as low as 0.3%. The temperature resistance of the weak gel system is up to 100 °C, and no syneresis occurs after 330 h at 95 °C. Scanning electron microscopy (SEM) results show that MF-7 has a three-dimensional network structure with spherical nodes. The spherical node is composed of polyacrylamide, and its structure size is completely matched with the hydrodynamic radius of the used polyacrylamide. When combined with the network structure formed by Cr(III), the dense cross-linking network structure with nodes can greatly improve the strength and thermal stability of the gel system. The higher the molecular weight of the polyacrylamide used, the higher the strength of the gel obtained. Overall, the composite cross-linking agent can synergistically improve the mechanical properties of the gel, and this weak gel system formed by oilfield sewage is more economical and tolerant.
- 4 April 2022
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 7 (15) , 12570-12579
Open AccessHigh-Temperature-Resistant, Low-Concentration Water-Controlling Composite Cross-Linked Polyacrylamide Weak Gel System Prepared from Oilfield Sewage
The polyacrylamide weak gel is an effective system to block a high-permeability layer, realize water control, and enhance oil recovery. However, its application is limited by poor temperature resistance and high polymer dosage. In this paper, an inorganic–organic composite cross-linking agent was synthesized by using Cr(III) and phenolic resin. The composite cross-linking agent can cross-link low concentrations of polyacrylamide to obtain a high-temperature-resistant weak gel system in oilfield sewage. By adjusting the ratio of Cr(III), phenolic resin, and polyacrylamide, an optimum formula MF-7 can be obtained according to the gel strength. Results from evaluation experiments show that the strength of MF-7 can reach H grade even at polyacrylamide concentrations as low as 0.3%. The temperature resistance of the weak gel system is up to 100 °C, and no syneresis occurs after 330 h at 95 °C. Scanning electron microscopy (SEM) results show that MF-7 has a three-dimensional network structure with spherical nodes. The spherical node is composed of polyacrylamide, and its structure size is completely matched with the hydrodynamic radius of the used polyacrylamide. When combined with the network structure formed by Cr(III), the dense cross-linking network structure with nodes can greatly improve the strength and thermal stability of the gel system. The higher the molecular weight of the polyacrylamide used, the higher the strength of the gel obtained. Overall, the composite cross-linking agent can synergistically improve the mechanical properties of the gel, and this weak gel system formed by oilfield sewage is more economical and tolerant.
- Open Access
- 2 August 2021
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 6 (32) , 20822-20832
Performance Evaluation of the Multifunctional Variable-Viscosity Slick Water for Fracturing in Unconventional Reservoirs
- 2 August 2021
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 6 (32) , 20822-20832
Open AccessPerformance Evaluation of the Multifunctional Variable-Viscosity Slick Water for Fracturing in Unconventional Reservoirs