Shigeki Naka
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shigeki Naka has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Masahiro Morimoto
University of Toyama
13 shared publications - Hiroyuki Okada
University of Toyama
6 shared publications - Seiichiro Izawa
Materials and Structures Laboratory Institute of Science Tokyo Yokohama Kanagawa Japan
6 shared publications - Masahiro Hiramoto
Institute for Molecular Science, 5-1 Higashiyama, Myodaiji, Okazaki, Aichi 444-8787, Japan
4 shared publications Masahiro Morimoto
University of Toyama
4 shared publicationsHiroyuki Okada
Academic Assembly Faculty of Engineering, University of Toyama, 3190 Gofuku, Toyama, Japan
3 shared publications
Latest Publications
- 30 October 2026
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 65 (20) , 20SP07
Optimizing weight ratio of phytochemical curcumin as acceptor in organic photodiodes using different donor materials
Organic photodiodes employing curcumin, an environmentally friendly and low-cost phytochemical polyphenol, are fabricated and evaluated for an acceptor material in the photoactive layer. Two different donor host materials are investigated by varying the curcumin ratio. For one donor host system, optimizing the curcumin weight ratio achieves high specific detectivity, and introducing a MoO 3 electron extraction layer enhances the photocurrent at low reverse bias. By employing the other donor host, which exhibits minimal absorption band overlap with curcumin, we demonstrate that curcumin directly contributes to photocurrent generation. Furthermore, the light-intensity dependence of the photocurrent in the devices using the latter host suggests a photocurrent multiplication property. These results demonstrate that sustainable phytochemicals like curcumin can function as effective semiconducting materials in green organic electronic devices.
- 30 October 2026
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 65 (20) , 20SP07
Optimizing weight ratio of phytochemical curcumin as acceptor in organic photodiodes using different donor materials
Organic photodiodes employing curcumin, an environmentally friendly and low-cost phytochemical polyphenol, are fabricated and evaluated for an acceptor material in the photoactive layer. Two different donor host materials are investigated by varying the curcumin ratio. For one donor host system, optimizing the curcumin weight ratio achieves high specific detectivity, and introducing a MoO 3 electron extraction layer enhances the photocurrent at low reverse bias. By employing the other donor host, which exhibits minimal absorption band overlap with curcumin, we demonstrate that curcumin directly contributes to photocurrent generation. Furthermore, the light-intensity dependence of the photocurrent in the devices using the latter host suggests a photocurrent multiplication property. These results demonstrate that sustainable phytochemicals like curcumin can function as effective semiconducting materials in green organic electronic devices.
- Open Access
- 1 June 2026
- Published by IOP Publishing in Applied Physics Express
- Vol. 19 (6) , 061001
Wide bandgap acceptor with high-lying triplet excited state for efficient upconversion organic light-emitting diode
Organic light-emitting diodes utilizing triplet–triplet annihilation upconversion (UC-OLEDs) enable low-voltage operation; however, they generally suffer from low efficiency. This issue stems from non-radiative deactivation via energy transfer to the acceptor’s low-lying triplet excited state (T 1 ). We introduced a wide-bandgap acceptor, naphthalene diimide derivative, with high T 1 energy (1.86 eV) to suppress this pathway. With an optimized layered structure, the device achieved an external quantum efficiency of 2.84%, 2.37 times higher than that of conventional perylene-tetracarboxylic-diimide devices, while significantly extending the operational lifetime by a factor of 2.7. Controlling T 1 energy of the acceptor is crucial for efficient and stable UC-OLEDs.
- 1 June 2026
- Published by IOP Publishing in Applied Physics Express
- Vol. 19 (6) , 061001
Open AccessWide bandgap acceptor with high-lying triplet excited state for efficient upconversion organic light-emitting diode
Organic light-emitting diodes utilizing triplet–triplet annihilation upconversion (UC-OLEDs) enable low-voltage operation; however, they generally suffer from low efficiency. This issue stems from non-radiative deactivation via energy transfer to the acceptor’s low-lying triplet excited state (T 1 ). We introduced a wide-bandgap acceptor, naphthalene diimide derivative, with high T 1 energy (1.86 eV) to suppress this pathway. With an optimized layered structure, the device achieved an external quantum efficiency of 2.84%, 2.37 times higher than that of conventional perylene-tetracarboxylic-diimide devices, while significantly extending the operational lifetime by a factor of 2.7. Controlling T 1 energy of the acceptor is crucial for efficient and stable UC-OLEDs.
- Open Access
- 24 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1) , 3785
Author Correction: Blue organic light-emitting diode with a turn-on voltage of 1.47V
- 24 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1) , 3785
Open AccessAuthor Correction: Blue organic light-emitting diode with a turn-on voltage of 1.47V
- 1 October 2025
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 64 (10) , 10SP08
Concentration dependence of triplet–triplet upconversion under electrical excitation
Triplet–triplet upconversion (TTU) is a promising strategy to enhance the efficiency of organic light-emitting diodes (OLEDs) by converting non-radiative triplet excitons into radiative singlet excitons. While much research has investigated TTU under photoexcitation, its behavior under electrical excitation remains insufficiently understood. In this study, the concentration dependence of TTU materials near the donor/acceptor interface was systematically examined using exciplex upconversion-type OLEDs (ExUC-OLEDs). By adjusting the donor composition or utilizing polymer blends, the triplet diffusion was effectively controlled. It was found that reducing the TTU material concentration below a certain threshold suppressed diffusion of triplet excitons, resulting in the confinement of triplet excitons. As a result, the current density at which TTU becomes dominant over monomolecular decay decreased. These findings provide valuable insights into the design of TTU-based OLEDs and contribute to a deeper understanding of TTU processes under electrical excitation.
- 1 October 2025
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 64 (10) , 10SP08
Concentration dependence of triplet–triplet upconversion under electrical excitation
Triplet–triplet upconversion (TTU) is a promising strategy to enhance the efficiency of organic light-emitting diodes (OLEDs) by converting non-radiative triplet excitons into radiative singlet excitons. While much research has investigated TTU under photoexcitation, its behavior under electrical excitation remains insufficiently understood. In this study, the concentration dependence of TTU materials near the donor/acceptor interface was systematically examined using exciplex upconversion-type OLEDs (ExUC-OLEDs). By adjusting the donor composition or utilizing polymer blends, the triplet diffusion was effectively controlled. It was found that reducing the TTU material concentration below a certain threshold suppressed diffusion of triplet excitons, resulting in the confinement of triplet excitons. As a result, the current density at which TTU becomes dominant over monomolecular decay decreased. These findings provide valuable insights into the design of TTU-based OLEDs and contribute to a deeper understanding of TTU processes under electrical excitation.
- 1 October 2025
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 64 (10) , 10SP05
Carrier dynamics and degradation behavior in exciplex upconversion-type organic light-emitting diodes
Organic light-emitting diodes (OLEDs) have attracted considerable attention for display and lighting applications. However, improving device stability and operational lifetime remains a major issue. In this study, exciplex upconversion-type OLEDs (ExUC-OLEDs) utilizing a donor/acceptor interface were investigated to achieve low-voltage operation and enhanced device stability. Compared with conventional OLEDs, the ExUC-OLED exhibited superior voltage stability and a 35 times longer operational lifetime. Displacement current measurements confirmed that charge accumulation was effectively suppressed even after long-term operation and ideal carrier recombination at the interface was achieved. Analysis focusing on carrier dynamics provides new insights into the degradation processes of OLEDs.
- 1 October 2025
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 64 (10) , 10SP05
Carrier dynamics and degradation behavior in exciplex upconversion-type organic light-emitting diodes
Organic light-emitting diodes (OLEDs) have attracted considerable attention for display and lighting applications. However, improving device stability and operational lifetime remains a major issue. In this study, exciplex upconversion-type OLEDs (ExUC-OLEDs) utilizing a donor/acceptor interface were investigated to achieve low-voltage operation and enhanced device stability. Compared with conventional OLEDs, the ExUC-OLED exhibited superior voltage stability and a 35 times longer operational lifetime. Displacement current measurements confirmed that charge accumulation was effectively suppressed even after long-term operation and ideal carrier recombination at the interface was achieved. Analysis focusing on carrier dynamics provides new insights into the degradation processes of OLEDs.
- Open Access
- 1 June 2025
- Published by Institute of Electronics, Information and Communications Engineers (IEICE) in IEICE Transactions on Electronics
- Vol. E108.C (6) , 267-270
Investigation of Acceptor Layer in Inverted Organic Multifunction Diodes
Organic multifunction diodes (MFDs) with light-emitting, photovoltaic, and photo sensing functions were demonstrated using a stack of N, N'-ditridecylperylene-3,4,9,10-tetracarboxylic diimide (PTCDI-C13) and 2,7-di(9H-fluoren-2-yl)benzo[lmn][3,8]-phenanthroline-1,3,6,8(2H,7H)-tetraone (HFl-NDI) as an electron transporter/acceptor and 5,6,11,12-tetraphenylnaphthacene (rubrene) as an emitter/donor. Polyethylenimine ethoxylated (PEIE) as an electron injection layer was introduced in an inverted-structured device. By using the inverted structure and introducing HFl-NDI to reduce the absorption in the acceptor layer, an increase in the emission of EL and an increase in the short-circuit current density in the OSC were obtained.
- 1 June 2025
- Published by Institute of Electronics, Information and Communications Engineers (IEICE) in IEICE Transactions on Electronics
- Vol. E108.C (6) , 267-270
Open AccessInvestigation of Acceptor Layer in Inverted Organic Multifunction Diodes
Organic multifunction diodes (MFDs) with light-emitting, photovoltaic, and photo sensing functions were demonstrated using a stack of N, N'-ditridecylperylene-3,4,9,10-tetracarboxylic diimide (PTCDI-C13) and 2,7-di(9H-fluoren-2-yl)benzo[lmn][3,8]-phenanthroline-1,3,6,8(2H,7H)-tetraone (HFl-NDI) as an electron transporter/acceptor and 5,6,11,12-tetraphenylnaphthacene (rubrene) as an emitter/donor. Polyethylenimine ethoxylated (PEIE) as an electron injection layer was introduced in an inverted-structured device. By using the inverted structure and introducing HFl-NDI to reduce the absorption in the acceptor layer, an increase in the emission of EL and an increase in the short-circuit current density in the OSC were obtained.
- Open Access
- 23 October 2024
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 161 (16)
Molecular dynamics study of N,N′-di-n-alkyl-3,4,9,10-perylenetetracarboxylic diimide (PTCDI)/rubrene interface: Why the charge transfer at the interface is optimized depending on the alkyl chain length of PTCDI
Molecular dynamics simulations were performed to investigate the interfacial structure of the N,N′-di-n-alkyl-3,4,9,10-perylenetetracarboxylic diimide (PTCDI)/rubrene interface, which represents the donor/acceptor interface in new types of organic light-emission diodes. In particular, the interfacial structure was examined for different alkyl chain lengths of PTCDI (Cn-PTCDI) at n = 4, 8, and 13, in order to elucidate the observed maximum charge transfer efficiency at the C8-PTCDI/rubrene interface in a recent experiment. The results revealed that the molecular conformation of the acceptor (Cn-PTCDI) molecules at the interface undergoes changes depending on the alkyl chain length when interacting with the rubrene molecule. It was found that the closest complex between Cn-PTCDI and rubrene is formed at n = 8, consistent with the experimental observation. In addition, the interfacial structures of Cn-PTCDI/air and rubrene/air were examined and compared to gain insights into the inherent stability associated with the intermolecular interactions at the interface.
- 23 October 2024
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 161 (16)
Open AccessMolecular dynamics study of N,N′-di-n-alkyl-3,4,9,10-perylenetetracarboxylic diimide (PTCDI)/rubrene interface: Why the charge transfer at the interface is optimized depending on the alkyl chain length of PTCDI
Molecular dynamics simulations were performed to investigate the interfacial structure of the N,N′-di-n-alkyl-3,4,9,10-perylenetetracarboxylic diimide (PTCDI)/rubrene interface, which represents the donor/acceptor interface in new types of organic light-emission diodes. In particular, the interfacial structure was examined for different alkyl chain lengths of PTCDI (Cn-PTCDI) at n = 4, 8, and 13, in order to elucidate the observed maximum charge transfer efficiency at the C8-PTCDI/rubrene interface in a recent experiment. The results revealed that the molecular conformation of the acceptor (Cn-PTCDI) molecules at the interface undergoes changes depending on the alkyl chain length when interacting with the rubrene molecule. It was found that the closest complex between Cn-PTCDI and rubrene is formed at n = 8, consistent with the experimental observation. In addition, the interfacial structures of Cn-PTCDI/air and rubrene/air were examined and compared to gain insights into the inherent stability associated with the intermolecular interactions at the interface.
- Open Access
- 1 August 2024
- Published by IOP Publishing in Applied Physics Express
- Vol. 17 (8) , 081006
Stable driving voltage in exciplex-type OLEDs with a bilayer interface
Organic light-emitting diodes (OLEDs) that produce exciplexes in a bilayer are device structures that can dramatically reduce the turn-on voltage. In this study, we report that this device structure contributes to an impressive improvement in operating lifetime. The lifetime of our OLED is 200 times longer than that of conventional OLEDs, and the voltage does not change after 100 h of operation. The reason for the stable driving voltage is no carrier accumulation inside the device at all by using a displacement current measurement. Analyzing the carrier dynamics in this work will provide a comprehensive solution for OLED degradation.
- 1 August 2024
- Published by IOP Publishing in Applied Physics Express
- Vol. 17 (8) , 081006
Open AccessStable driving voltage in exciplex-type OLEDs with a bilayer interface
Organic light-emitting diodes (OLEDs) that produce exciplexes in a bilayer are device structures that can dramatically reduce the turn-on voltage. In this study, we report that this device structure contributes to an impressive improvement in operating lifetime. The lifetime of our OLED is 200 times longer than that of conventional OLEDs, and the voltage does not change after 100 h of operation. The reason for the stable driving voltage is no carrier accumulation inside the device at all by using a displacement current measurement. Analyzing the carrier dynamics in this work will provide a comprehensive solution for OLED degradation.
- Open Access
- 21 February 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Control of energy transfer by tuning Donor/Acceptor interface for exciplex upconversion-type organic light-emitting diodes
Organic light-emitting diodes (OLEDs) generally require operating voltage corresponding to the energy gap of the emitter. To reduce operating voltage, exciplex upconversion-type OLEDs (ExUC-OLEDs) have been reported. ExUC-OLEDs emit light via triplet-triplet upconversion (TTU) by transferring the energy of the exciplex to T1 of the emitter. Therefore, a combination of donor and acceptor that form an appropriate exciplex for energy transfer is required, and the degree of freedom in material selection for ExUC-OLEDs is low. Herein, the insertion of the spacer at the donor/acceptor interface controls the coulombic attraction, the energy of the exciplex, and the energy transfer to the emitter. As a result, ExUC emission is maintained up to 3 nm spacer thickness, and the external quantum efficiency is improved. Therefore, it is possible to increase the degree of freedom in material selection for ExUC-OLEDs by using appropriate spacer materials.
- 21 February 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessControl of energy transfer by tuning Donor/Acceptor interface for exciplex upconversion-type organic light-emitting diodes
Organic light-emitting diodes (OLEDs) generally require operating voltage corresponding to the energy gap of the emitter. To reduce operating voltage, exciplex upconversion-type OLEDs (ExUC-OLEDs) have been reported. ExUC-OLEDs emit light via triplet-triplet upconversion (TTU) by transferring the energy of the exciplex to T1 of the emitter. Therefore, a combination of donor and acceptor that form an appropriate exciplex for energy transfer is required, and the degree of freedom in material selection for ExUC-OLEDs is low. Herein, the insertion of the spacer at the donor/acceptor interface controls the coulombic attraction, the energy of the exciplex, and the energy transfer to the emitter. As a result, ExUC emission is maintained up to 3 nm spacer thickness, and the external quantum efficiency is improved. Therefore, it is possible to increase the degree of freedom in material selection for ExUC-OLEDs by using appropriate spacer materials.
- Open Access
- 20 September 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-10
Blue organic light-emitting diode with a turn-on voltage of 1.47 V
Among the three primary colors, blue emission in organic light-emitting diodes (OLEDs) are highly important but very difficult to develop. OLEDs have already been commercialized; however, blue OLEDs have the problem of requiring a high applied voltage due to the high-energy of blue emission. Herein, an ultralow voltage turn-on at 1.47 V for blue emission with a peak wavelength at 462 nm (2.68 eV) is demonstrated in an OLED device with a typical blue-fluorescent emitter that is widely utilized in a commercial display. This OLED reaches 100 cd/m 2 , which is equivalent to the luminance of a typical commercial display, at 1.97 V. Blue emission from the OLED is achieved by the selective excitation of the low-energy triplet states at a low applied voltage by using the charge transfer (CT) state as a precursor and triplet-triplet annihilation, which forms one emissive singlet from two triplet excitons.
- 20 September 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-10
Open AccessBlue organic light-emitting diode with a turn-on voltage of 1.47 V
Among the three primary colors, blue emission in organic light-emitting diodes (OLEDs) are highly important but very difficult to develop. OLEDs have already been commercialized; however, blue OLEDs have the problem of requiring a high applied voltage due to the high-energy of blue emission. Herein, an ultralow voltage turn-on at 1.47 V for blue emission with a peak wavelength at 462 nm (2.68 eV) is demonstrated in an OLED device with a typical blue-fluorescent emitter that is widely utilized in a commercial display. This OLED reaches 100 cd/m 2 , which is equivalent to the luminance of a typical commercial display, at 1.97 V. Blue emission from the OLED is achieved by the selective excitation of the low-energy triplet states at a low applied voltage by using the charge transfer (CT) state as a precursor and triplet-triplet annihilation, which forms one emissive singlet from two triplet excitons.