Ruiguo Wang
Ruiguo Wang has a total of 61 co-authors. Here are the top co-authors by number of shared publications:
Peilong Wang
6 shared publicationsTong Li
Chinese Academy of Agricultural Sciences
6 shared publications- Peilong Wang
Institute of Quality Standards and Testing Technology for Agro-Products, Chinese Academy of Agricultural Sciences, Beijing 100081, China
4 shared publications - Jianjie Fu
Chinese Academy of Sciences
3 shared publications - Jie Cheng
Institute of Quality Standards and Testing Technology for Agro-products, Chinese Academy of Agricultural Sciences, Beijing, 100081, China
3 shared publications Nannan Zhao
State Key Laboratory for Quality and Safety of Agro─Products
3 shared publications
Latest Publications
- Open Access
- 4 October 2026
- Published by Elsevier in SSRN Electronic Journal
Comprehensive Quantification of Total Hydrolyzable Fumonisins in Maize-Based Matrices by Alkaline Hydrolysis-LC-MS/MS: Method Optimization, Validation, and Application
Fumonisins (FBs) in maize exist as free, covalently bound, and non-covalently bound forms, with conventional methods underestimating total exposure by targeting only free FBs. This study developed and validated a complete alkaline hydrolysis-LC-MS/MS method for quantifying total FBs as hydrolyzed FBs (HFBs) in maize-based matrices. Using naturally contaminated DDGS, a Box-Behnken design optimized hydrolysis conditions, achieving complete HFBs release within 60 min at 40°C with 2 M NaOH. Time-course experiments confirmed near-quantitative conversion (93.0–103.6%) and 5-day alkaline stability. Method validation across four matrices showed recoveries (86.0–116.0%), precision (RSD ≤ 17.1%), and LOQs (0.74–6.80 μg/kg). Analysis of 33 commercial samples revealed bound FBs accounted for 42–75% of total FBs in DDGS and up to 83% in silage, confirming conventional monitoring severely underestimates exposure risks. This method offers a reliable tool for accurate fumonisin quantification in food and feed.
- 4 October 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessComprehensive Quantification of Total Hydrolyzable Fumonisins in Maize-Based Matrices by Alkaline Hydrolysis-LC-MS/MS: Method Optimization, Validation, and Application
Fumonisins (FBs) in maize exist as free, covalently bound, and non-covalently bound forms, with conventional methods underestimating total exposure by targeting only free FBs. This study developed and validated a complete alkaline hydrolysis-LC-MS/MS method for quantifying total FBs as hydrolyzed FBs (HFBs) in maize-based matrices. Using naturally contaminated DDGS, a Box-Behnken design optimized hydrolysis conditions, achieving complete HFBs release within 60 min at 40°C with 2 M NaOH. Time-course experiments confirmed near-quantitative conversion (93.0–103.6%) and 5-day alkaline stability. Method validation across four matrices showed recoveries (86.0–116.0%), precision (RSD ≤ 17.1%), and LOQs (0.74–6.80 μg/kg). Analysis of 33 commercial samples revealed bound FBs accounted for 42–75% of total FBs in DDGS and up to 83% in silage, confirming conventional monitoring severely underestimates exposure risks. This method offers a reliable tool for accurate fumonisin quantification in food and feed.
- 29 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (31) , 42741-42756
Ru Nanozyme-Loaded Fluorinated Strong-Base Anion-Exchange Resin for Dual-Mode Optical Screening of Per- and Polyfluoroalkyl Substances (PFAS)
Per- and polyfluoroalkyl substances (PFAS) pose persistent risks to water and food safety, highlighting the need for simple and portable screening methods. Herein, we developed a Ru nanozyme-loaded per-fluoropolyether (PFPE)-containing strong-base ion-exchange (IEX) resin, PFPE-IEX+@Ru, for dual-mode optical sensing of perfluorooctanoic acid (PFOA). The PFPE-IEX + resin enriched PFOA through the combined effects of electrostatic association and fluorous/hydrophobic affinity, while the Ru nanozyme converted PFOA adsorption into changes in 3,3′,5,5′-tetramethylbenzidine (TMB) oxidation. Under optimized conditions, PFOA adsorption suppressed Ru-catalyzed TMB oxidation, leading to a decrease in absorbance at 652 nm and an increase in fluorescence emission at 405 nm. The assay achieved detection limits of 0.50 μg L−1 for the colorimetric mode and 0.19 μg L−1 for the fluorescence mode. XPS, zeta-potential analysis, and DFT calculations supported that PFOA adsorption altered the local interfacial environment of PFPE-IEX+@Ru. A smartphone-based RGB analysis program was further developed for portable colorimetry-based detection. The method showed acceptable recoveries in spiked water and pretreated milk samples. Beyond PFOA, PFOS and PFBA also produced measurable concentration-dependent colorimetric responses, indicating broader responsiveness toward the tested PFAS analytes. These findings suggest the potential of PFPE-IEX+@Ru for rapid PFAS screening, although unresolved PFAS mixtures cannot be quantitatively interpreted using a PFOA calibration curve because multiple responsive PFAS congeners contribute to the optical signal.
- 29 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (31) , 42741-42756
Ru Nanozyme-Loaded Fluorinated Strong-Base Anion-Exchange Resin for Dual-Mode Optical Screening of Per- and Polyfluoroalkyl Substances (PFAS)
Per- and polyfluoroalkyl substances (PFAS) pose persistent risks to water and food safety, highlighting the need for simple and portable screening methods. Herein, we developed a Ru nanozyme-loaded per-fluoropolyether (PFPE)-containing strong-base ion-exchange (IEX) resin, PFPE-IEX+@Ru, for dual-mode optical sensing of perfluorooctanoic acid (PFOA). The PFPE-IEX + resin enriched PFOA through the combined effects of electrostatic association and fluorous/hydrophobic affinity, while the Ru nanozyme converted PFOA adsorption into changes in 3,3′,5,5′-tetramethylbenzidine (TMB) oxidation. Under optimized conditions, PFOA adsorption suppressed Ru-catalyzed TMB oxidation, leading to a decrease in absorbance at 652 nm and an increase in fluorescence emission at 405 nm. The assay achieved detection limits of 0.50 μg L−1 for the colorimetric mode and 0.19 μg L−1 for the fluorescence mode. XPS, zeta-potential analysis, and DFT calculations supported that PFOA adsorption altered the local interfacial environment of PFPE-IEX+@Ru. A smartphone-based RGB analysis program was further developed for portable colorimetry-based detection. The method showed acceptable recoveries in spiked water and pretreated milk samples. Beyond PFOA, PFOS and PFBA also produced measurable concentration-dependent colorimetric responses, indicating broader responsiveness toward the tested PFAS analytes. These findings suggest the potential of PFPE-IEX+@Ru for rapid PFAS screening, although unresolved PFAS mixtures cannot be quantitatively interpreted using a PFOA calibration curve because multiple responsive PFAS congeners contribute to the optical signal.
- 1 July 2026
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 60 (27) , 19584-19596
PFAS in Fast Foods with Hot-Contact to Food-Contact Materials: Occurrence, Packaging Influence, and Risk Priority
Despite growing concern over per- and polyfluoroalkyl substances (PFAS), evidence for packaging-driven dietary exposure under hot-contact scenarios remains limited, especially in China's rapidly expanding takeout market. Here, we conducted a survey of fast foods (n = 150) and corresponding food-contact materials (FCMs, n = 150) across Chinese markets, quantifying 32 legacy and emerging PFAS. PFAS were detected in all foods (range: 0.01-79.4 ng/g; median: 3.45 ng/g) and FCMs (0.01-205 ng/g; 3.88 ng/g). Paper-FCMs showed the highest PFAS levels among different FCM categories and exhibited industry-specific patterns. Food PFAS profiles mirrored those of paired FCMs, with significant correlations for several dominant congeners (p < 0.05), indicating migration contributions. Moreover, migration patterns were jointly influenced by PFAS physicochemical properties (e.g., log KOW, functional moieties), FCM texture, and food composition. Clear differences between leading and smaller brands were observed, with smaller brands exhibiting higher PFAS burdens in fast foods (p < 0.05). Notably higher PFAS concentrations were identified in soup-based instant foods. A controlled experiment demonstrated 3.1-26-fold higher PFAS concentrations in instant foods prepared in original paper packaging than in glass containers, largely driven by 6:2 FTS, which accounted for 88.3% of the total ∑32PFAS increment. Integrated multifactor prioritization revealed several emerging PFAS of particular concern, especially given their expanding use in FCMs. These findings highlight hot-contact packaging as a non-negligible exposure source and call for enhanced surveillance of emerging PFAS in fast-food supply chains.
- 1 July 2026
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 60 (27) , 19584-19596
PFAS in Fast Foods with Hot-Contact to Food-Contact Materials: Occurrence, Packaging Influence, and Risk Priority
Despite growing concern over per- and polyfluoroalkyl substances (PFAS), evidence for packaging-driven dietary exposure under hot-contact scenarios remains limited, especially in China's rapidly expanding takeout market. Here, we conducted a survey of fast foods (n = 150) and corresponding food-contact materials (FCMs, n = 150) across Chinese markets, quantifying 32 legacy and emerging PFAS. PFAS were detected in all foods (range: 0.01-79.4 ng/g; median: 3.45 ng/g) and FCMs (0.01-205 ng/g; 3.88 ng/g). Paper-FCMs showed the highest PFAS levels among different FCM categories and exhibited industry-specific patterns. Food PFAS profiles mirrored those of paired FCMs, with significant correlations for several dominant congeners (p < 0.05), indicating migration contributions. Moreover, migration patterns were jointly influenced by PFAS physicochemical properties (e.g., log KOW, functional moieties), FCM texture, and food composition. Clear differences between leading and smaller brands were observed, with smaller brands exhibiting higher PFAS burdens in fast foods (p < 0.05). Notably higher PFAS concentrations were identified in soup-based instant foods. A controlled experiment demonstrated 3.1-26-fold higher PFAS concentrations in instant foods prepared in original paper packaging than in glass containers, largely driven by 6:2 FTS, which accounted for 88.3% of the total ∑32PFAS increment. Integrated multifactor prioritization revealed several emerging PFAS of particular concern, especially given their expanding use in FCMs. These findings highlight hot-contact packaging as a non-negligible exposure source and call for enhanced surveillance of emerging PFAS in fast-food supply chains.
- Open Access
- 14 May 2026
- Published by Elsevier in SSRN Electronic Journal
Automated magnetic solid-phase extraction based on hydrophilic-lipophilic balanced materials for LC-MS/MS determination of macrolides in pork
A fully automated method based on magnetic solid-phase extraction (MSPE) using commercial hydrophilic-lipophilic balanced magnetic particles (MHLB) coupled with liquid chromatography-tandem mass spectrometry (LC-MS/MS) was developed for the simultaneous determination of nine macrolides in pork. Key parameters of the automated MSPE procedure, including elution solvent, adsorbent amount, and ultrasonic time, were systematically optimized, achieving complete elution with only 2 mL of methanol. Processing one sample consumed only 30 mg of MHLB and 3 mL of organic solvent, and the automated protocol enabled batch processing of up to 20 samples. The method showed good linearity (R² > 0.99), low limits of quantification (0.03–0.33 μg/kg), and satisfactory recoveries (77.8–90.0% with RSDs < 10.3%). Compared with conventional HLB cartridges (200 mg sorbent, 14 mL organic solvent, mandatory defatting), MHLB offered superior solvent economy, material efficiency, and operational simplicity, with better matrix effect tolerance and more consistent recoveries. This automated MHLB-LC-MS/MS approach provides a reliable, high-throughput, and more environmentally friendly alternative for monitoring macrolide residues in livestock products.
- 14 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessAutomated magnetic solid-phase extraction based on hydrophilic-lipophilic balanced materials for LC-MS/MS determination of macrolides in pork
A fully automated method based on magnetic solid-phase extraction (MSPE) using commercial hydrophilic-lipophilic balanced magnetic particles (MHLB) coupled with liquid chromatography-tandem mass spectrometry (LC-MS/MS) was developed for the simultaneous determination of nine macrolides in pork. Key parameters of the automated MSPE procedure, including elution solvent, adsorbent amount, and ultrasonic time, were systematically optimized, achieving complete elution with only 2 mL of methanol. Processing one sample consumed only 30 mg of MHLB and 3 mL of organic solvent, and the automated protocol enabled batch processing of up to 20 samples. The method showed good linearity (R² > 0.99), low limits of quantification (0.03–0.33 μg/kg), and satisfactory recoveries (77.8–90.0% with RSDs < 10.3%). Compared with conventional HLB cartridges (200 mg sorbent, 14 mL organic solvent, mandatory defatting), MHLB offered superior solvent economy, material efficiency, and operational simplicity, with better matrix effect tolerance and more consistent recoveries. This automated MHLB-LC-MS/MS approach provides a reliable, high-throughput, and more environmentally friendly alternative for monitoring macrolide residues in livestock products.
- Open Access
- 17 March 2026
- Published by Elsevier in SSRN Electronic Journal
Nanozyme-modified ion-exchange resins with selective adsorption for colorimetric/fluorescent dual-mode rapid detection of perfluorooctanoic acid
Per- and poly-fluoroalkyl substances (PFAS) contamination poses significant public health risks, making rapid and sensitive detection crucial. This study explored the novel nanozyme-modified strong-base anion-exchange resins for selective detection of perfluorooctanoic acid (PFOA), enabling dual-mode detection of PFOA with colorimetric down to 0.50 ppb and fluorescence down to 0.19 ppb. PFOA adsorption transfers electrons to Ru, inhibiting its peroxidase-like activity and modulating both signals. The dual readouts mutually verify results to reduce errors inherent in single-detection approaches. The results revealed unique adsorption and sensing behaviors, characterized by the aggregation and selective adsorption of PFOA through electrostatic interactions and fluorine-fluorine interactions, and the sensing detection achieved by the inhibition of peroxidase-like activity after the adsorption of PFOA. Computer simulations have elucidated the dynamic mechanisms of sensing, adsorption and charge transfer in this work. Moreover, the high PFAS selectivity of “adsorption-sensing integration” has been verified on actual tap water and milk samples.
- 17 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessNanozyme-modified ion-exchange resins with selective adsorption for colorimetric/fluorescent dual-mode rapid detection of perfluorooctanoic acid
Per- and poly-fluoroalkyl substances (PFAS) contamination poses significant public health risks, making rapid and sensitive detection crucial. This study explored the novel nanozyme-modified strong-base anion-exchange resins for selective detection of perfluorooctanoic acid (PFOA), enabling dual-mode detection of PFOA with colorimetric down to 0.50 ppb and fluorescence down to 0.19 ppb. PFOA adsorption transfers electrons to Ru, inhibiting its peroxidase-like activity and modulating both signals. The dual readouts mutually verify results to reduce errors inherent in single-detection approaches. The results revealed unique adsorption and sensing behaviors, characterized by the aggregation and selective adsorption of PFOA through electrostatic interactions and fluorine-fluorine interactions, and the sensing detection achieved by the inhibition of peroxidase-like activity after the adsorption of PFOA. Computer simulations have elucidated the dynamic mechanisms of sensing, adsorption and charge transfer in this work. Moreover, the high PFAS selectivity of “adsorption-sensing integration” has been verified on actual tap water and milk samples.
- 9 October 2025
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 59 (41) , 22239-22250
Mapping Legacy and Emerging PFAS in China’s Staple Crop Farmlands: Occurrence, Source Tracing, and Risk Prioritization from Paired Soil–Crops
Per- and polyfluoroalkyl substances (PFAS) are increasingly detected in agricultural environments, yet national-scale data on PFAS contamination in paired food crops and soils remain scarce. This study presents the first nationwide investigation of legacy and emerging PFAS in paired soil and grain samples (n = 160) from 11 provinces representing China’s major rice, wheat, and maize producing regions. PFAS were ubiquitously found in soils (median: 4.96 ng/g; range: 2.28–33.5 ng/g) and grains (7.74 ng/g; 2.40–25.3 ng/g), with short-chain perfluoroalkyl carboxylic acids being the dominant class. The emerging-to-legacy PFAS ratio was 2.16 in soils and 4.26 in grains, and crop PFAS levels were 1.5 times higher than those in corresponding soils, indicating the greater propensity of emerging PFAS to be transported into crops. Paddy soils exhibited significantly higher PFAS concentrations than dryland soils (p < 0.05), likely due to irrigation-driven accumulation. In addition, intensive anthropogenic activities were found positively related to PFAS concentrations in soils (r = 0.54, p < 0.05). Positive Matrix Factorization (PMF) analysis attributed PFAS sources primarily to food packaging, textile processing, and fluorochemical industries. Risk prioritization based on the ToxPi framework highlighted PFPeA, PFOA, PFOS, and HFPO–DA as priority compounds of concern. This study provides essential baseline data on PFAS contamination in Chinese farmland and paired staple crops, supporting regulatory oversight of both legacy and emerging PFAS in agricultural systems.
- 9 October 2025
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 59 (41) , 22239-22250
Mapping Legacy and Emerging PFAS in China’s Staple Crop Farmlands: Occurrence, Source Tracing, and Risk Prioritization from Paired Soil–Crops
Per- and polyfluoroalkyl substances (PFAS) are increasingly detected in agricultural environments, yet national-scale data on PFAS contamination in paired food crops and soils remain scarce. This study presents the first nationwide investigation of legacy and emerging PFAS in paired soil and grain samples (n = 160) from 11 provinces representing China’s major rice, wheat, and maize producing regions. PFAS were ubiquitously found in soils (median: 4.96 ng/g; range: 2.28–33.5 ng/g) and grains (7.74 ng/g; 2.40–25.3 ng/g), with short-chain perfluoroalkyl carboxylic acids being the dominant class. The emerging-to-legacy PFAS ratio was 2.16 in soils and 4.26 in grains, and crop PFAS levels were 1.5 times higher than those in corresponding soils, indicating the greater propensity of emerging PFAS to be transported into crops. Paddy soils exhibited significantly higher PFAS concentrations than dryland soils (p < 0.05), likely due to irrigation-driven accumulation. In addition, intensive anthropogenic activities were found positively related to PFAS concentrations in soils (r = 0.54, p < 0.05). Positive Matrix Factorization (PMF) analysis attributed PFAS sources primarily to food packaging, textile processing, and fluorochemical industries. Risk prioritization based on the ToxPi framework highlighted PFPeA, PFOA, PFOS, and HFPO–DA as priority compounds of concern. This study provides essential baseline data on PFAS contamination in Chinese farmland and paired staple crops, supporting regulatory oversight of both legacy and emerging PFAS in agricultural systems.
- 2 August 2025
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 59 (31) , 16662-16674
Unraveling Legacy and Emerging PFAS Characteristics in Milk across 15 Countries (2020–2024): Features, Temporal Trend,s and Risk Priority
Despite increasing concerns over the potential hazards of perfluoroalkyl and polyfluoroalkyl substances (PFAS), their characteristics, especially temporal trends, remain largely unexplored in milk. With milk sampled from 2020 to 2024, the temporal trends and cross-country variations of legacy and emerging PFAS were investigated across 15 countries for the first time. Among the 32 PFAS analyzed, 26 were detected in more than 40% of the samples and 18 were present in over 60%, indicating their widespread geographical occurrence. Over the five-year period, concentrations of legacy PFAS declined significantly (p < 0.05), with a reduction rate of 85.9%, whereas emerging PFAS─particularly hexafluoropropylene oxide dimer (HFPO-DA) and 6:2 fluorotelomer sulfonic acids (6:2 FTS)─increased sharply by 251% and 146%. Based on these observed trends, we further projected PFAS concentrations in milk through 2030 using three statistical models, revealing a potential dominance of emerging PFAS in the near future. Notably, spatial differences in PFAS distribution appear to be associated with intensive industrialization and socioeconomic activities. Furthermore, a risk prioritization analysis integrating eight exposure and toxicity domains identified HFPO-DA, perfluorooctanoic acid (PFOA), perfluoropentanoic acid (PFPeA), and perfluorohexanesulfonate (PFHxS) as priority contaminants. These findings provide critical insights into global PFAS regulations, their effectiveness, and the urgent need for continuous monitoring of novel PFAS in future food supply.
- 2 August 2025
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 59 (31) , 16662-16674
Unraveling Legacy and Emerging PFAS Characteristics in Milk across 15 Countries (2020–2024): Features, Temporal Trend,s and Risk Priority
Despite increasing concerns over the potential hazards of perfluoroalkyl and polyfluoroalkyl substances (PFAS), their characteristics, especially temporal trends, remain largely unexplored in milk. With milk sampled from 2020 to 2024, the temporal trends and cross-country variations of legacy and emerging PFAS were investigated across 15 countries for the first time. Among the 32 PFAS analyzed, 26 were detected in more than 40% of the samples and 18 were present in over 60%, indicating their widespread geographical occurrence. Over the five-year period, concentrations of legacy PFAS declined significantly (p < 0.05), with a reduction rate of 85.9%, whereas emerging PFAS─particularly hexafluoropropylene oxide dimer (HFPO-DA) and 6:2 fluorotelomer sulfonic acids (6:2 FTS)─increased sharply by 251% and 146%. Based on these observed trends, we further projected PFAS concentrations in milk through 2030 using three statistical models, revealing a potential dominance of emerging PFAS in the near future. Notably, spatial differences in PFAS distribution appear to be associated with intensive industrialization and socioeconomic activities. Furthermore, a risk prioritization analysis integrating eight exposure and toxicity domains identified HFPO-DA, perfluorooctanoic acid (PFOA), perfluoropentanoic acid (PFPeA), and perfluorohexanesulfonate (PFHxS) as priority contaminants. These findings provide critical insights into global PFAS regulations, their effectiveness, and the urgent need for continuous monitoring of novel PFAS in future food supply.
- 1 March 2023
- Published by American Chemical Society (ACS) in Journal of Agricultural and Food Chemistry
- Vol. 71 (10) , 4272-4280
Effective Extraction of Bisphenol Compounds from Milk with Stable Zr(IV)-Based Metal–Organic Framework Particles
Bisphenol compounds (BPs) have recently been the subject of growing interest due to their wide use in industrial and consumer products. Besides their adverse effects on human endocrine system, effective extraction of BPs and their elimination from complex sample matrix are still significant challenges in food analysis. Herein, a novel Zr(IV)-based metal-organic framework (MOF), named BUT-16, has been synthesized and utilized for the extraction and enrichment of BPs in milk samples. Bisphenol A (BPA), one of the highest production volume BPs, is used as a model molecule. The uptake capacity for BPA can reach up to 48 mg/g, and the adsorption rate is rapid (∼10 min), because of the larger surface area and cooperation of multiple functionalities of BUT-16. Employing BUT-16 in solid-phase extraction, coupled with ultra-performance liquid chromatography-tandem mass spectrometry detection, we generated a rapid, facile, and robust method for the enrichment and detection of trace BPA and its 12 substitutes in milk samples. After optimization, the limits of detection and quantification for BPs can be achieved as low as 0.05 and 0.2 ng/mL, respectively. Without the correction of the isotopic internal standard, the average recoveries of BPs at the different spiked concentrations varied from 63.8 to 120.6%, with a satisfactory precision (RSD ≤ 8.2%). Furthermore, the proposed method was successfully applied to the detection of BPs in real milk samples, and the results were in accordance with those of methods reported previously.
- 1 March 2023
- Published by American Chemical Society (ACS) in Journal of Agricultural and Food Chemistry
- Vol. 71 (10) , 4272-4280
Effective Extraction of Bisphenol Compounds from Milk with Stable Zr(IV)-Based Metal–Organic Framework Particles
Bisphenol compounds (BPs) have recently been the subject of growing interest due to their wide use in industrial and consumer products. Besides their adverse effects on human endocrine system, effective extraction of BPs and their elimination from complex sample matrix are still significant challenges in food analysis. Herein, a novel Zr(IV)-based metal-organic framework (MOF), named BUT-16, has been synthesized and utilized for the extraction and enrichment of BPs in milk samples. Bisphenol A (BPA), one of the highest production volume BPs, is used as a model molecule. The uptake capacity for BPA can reach up to 48 mg/g, and the adsorption rate is rapid (∼10 min), because of the larger surface area and cooperation of multiple functionalities of BUT-16. Employing BUT-16 in solid-phase extraction, coupled with ultra-performance liquid chromatography-tandem mass spectrometry detection, we generated a rapid, facile, and robust method for the enrichment and detection of trace BPA and its 12 substitutes in milk samples. After optimization, the limits of detection and quantification for BPs can be achieved as low as 0.05 and 0.2 ng/mL, respectively. Without the correction of the isotopic internal standard, the average recoveries of BPs at the different spiked concentrations varied from 63.8 to 120.6%, with a satisfactory precision (RSD ≤ 8.2%). Furthermore, the proposed method was successfully applied to the detection of BPs in real milk samples, and the results were in accordance with those of methods reported previously.
- 1 June 2022
- Published by American Chemical Society (ACS) in Journal of Agricultural and Food Chemistry
- Vol. 70 (23) , 7279-7287
Comparative In Vitro and In Vivo Hydroxylation Metabolization of Polychlorinated Biphenyl 101 in Laying Hens: A Pilot Study
Polychlorinated biphenyls (PCBs) can be metabolized into hydroxylated PCBs (OH-PCBs) that exhibit greater toxicity than their parent compounds. In particular, 2,2',4,5,5'-pentachlorobiphenyl (PCB 101) is commonly found in chicken feeds and breeding environments, although information on the biotransformation of this PCB in chickens is lacking. In this study, the hydroxylation metabolization of PCB 101 was assessed based on in vitro trials with Sanhuang chicken liver microsomes and in vivo experiments with Hy-Line Brown hens. The para-substituted metabolite 4'-OH-PCB 101 is the predominant metabolite of PCB 101. 4'-OH-PCB 101 is preferentially retained in the chicken bloodstream and partly distributed into different tissues of laying hens. The blood-brain barrier can effectively prevent the OH-PCB from entering the brain, and the adipose tissue contains a relatively low residue concentration of the OH-PCB. The laying hen can deplete the OH-PCB via laying eggs and excrement. The ratio of 4'-OH-PCB 101/PCB 101 in egg yolk is about 1:2. These results first provide definite evidence for the previous hypothesis of the PCB 101 metabolism by chickens. They could assist in predicting the environmental fate of PCBs, and in the risk assessment of PCBs and OH-PCBs in chicken-based foodstuffs.
- 1 June 2022
- Published by American Chemical Society (ACS) in Journal of Agricultural and Food Chemistry
- Vol. 70 (23) , 7279-7287
Comparative In Vitro and In Vivo Hydroxylation Metabolization of Polychlorinated Biphenyl 101 in Laying Hens: A Pilot Study
Polychlorinated biphenyls (PCBs) can be metabolized into hydroxylated PCBs (OH-PCBs) that exhibit greater toxicity than their parent compounds. In particular, 2,2',4,5,5'-pentachlorobiphenyl (PCB 101) is commonly found in chicken feeds and breeding environments, although information on the biotransformation of this PCB in chickens is lacking. In this study, the hydroxylation metabolization of PCB 101 was assessed based on in vitro trials with Sanhuang chicken liver microsomes and in vivo experiments with Hy-Line Brown hens. The para-substituted metabolite 4'-OH-PCB 101 is the predominant metabolite of PCB 101. 4'-OH-PCB 101 is preferentially retained in the chicken bloodstream and partly distributed into different tissues of laying hens. The blood-brain barrier can effectively prevent the OH-PCB from entering the brain, and the adipose tissue contains a relatively low residue concentration of the OH-PCB. The laying hen can deplete the OH-PCB via laying eggs and excrement. The ratio of 4'-OH-PCB 101/PCB 101 in egg yolk is about 1:2. These results first provide definite evidence for the previous hypothesis of the PCB 101 metabolism by chickens. They could assist in predicting the environmental fate of PCBs, and in the risk assessment of PCBs and OH-PCBs in chicken-based foodstuffs.
- 30 November 2021
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (48) , 58019-58026
Remarkable Uptake of Deoxynivalenol in Stable Metal–Organic Frameworks
Deoxynivalenol (DON), which is known as one of the most harmful mycotoxins, has contaminated food and feed and attracted concerns worldwide. However, the effective adsorptive removal of DON to ensure food safety still is a challenge, which is ascribed to the poor planarity and larger steric hindrance of DON molecules. Here, a new Zr(IV)-based metal–organic framework, entitled BUT-16 with one-dimensional channels and N-atom-decorated pore surface, is designed, prepared, and utilized for the adsorptive removal of DON. It exhibits excellent adsorption ability with an adsorption capacity of 46 mg/g higher than all reported adsorbents until now and a rapid adsorption rate of 0.031 g mg–1 min–1. DFT calculation and X-ray photoelectron spectroscopy results of the guest-loaded phase suggest that the record-breaking adsorption could be due to the cooperation of hydrogen bonding and Zr···O interaction between DON molecules and BUT-16 host. Most importantly, BUT-16 can effectively adsorb and remove DON in the simulated gastric fluid, but DON adsorbed on BUT-16 is hardly desorbed in the simulated intestinal fluid. The results demonstrate that BUT-16 has great promising application for the control of DON in foods and feeds.
- 30 November 2021
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (48) , 58019-58026
Remarkable Uptake of Deoxynivalenol in Stable Metal–Organic Frameworks
Deoxynivalenol (DON), which is known as one of the most harmful mycotoxins, has contaminated food and feed and attracted concerns worldwide. However, the effective adsorptive removal of DON to ensure food safety still is a challenge, which is ascribed to the poor planarity and larger steric hindrance of DON molecules. Here, a new Zr(IV)-based metal–organic framework, entitled BUT-16 with one-dimensional channels and N-atom-decorated pore surface, is designed, prepared, and utilized for the adsorptive removal of DON. It exhibits excellent adsorption ability with an adsorption capacity of 46 mg/g higher than all reported adsorbents until now and a rapid adsorption rate of 0.031 g mg–1 min–1. DFT calculation and X-ray photoelectron spectroscopy results of the guest-loaded phase suggest that the record-breaking adsorption could be due to the cooperation of hydrogen bonding and Zr···O interaction between DON molecules and BUT-16 host. Most importantly, BUT-16 can effectively adsorb and remove DON in the simulated gastric fluid, but DON adsorbed on BUT-16 is hardly desorbed in the simulated intestinal fluid. The results demonstrate that BUT-16 has great promising application for the control of DON in foods and feeds.