Christine Peyrelasse
Christine Peyrelasse has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Florian Monlau
APESA, Pôle Valorisation, Cap Ecologia, 64230 Lescar, France
3 shared publications Audrey Lallement
APESA, Pôle Valorisation, Montardon, France
2 shared publications- Blandine Schraauwers
APESA, Plateau Technique, Cap Ecologia, Avenue Fréderic Joliot Curie, 64230 Lescar, France
2 shared publications Matthieu Jacob
RECORD, Campus LyonTech La Doua, Villeurbanne Cedex, France
2 shared publications- Prasad Kaparaju
School of Engineering and Built Environment, Griffith University, Nathan, Qld 4111, Australia
2 shared publications - Samuel Maunas
APESA, Plateau Technique, Cap Ecologia, Avenue Fréderic Joliot Curie, 64230 Lescar, France
2 shared publications
Latest Publications
- Open Access
Integration of Digestate-Derived Biochar into the Anaerobic Digestion Process through Circular Economic and Environmental Approaches—A Review
The growing energy consumption and the need for a circular economy have driven considerable interest in the anaerobic digestion (AD) of organic waste, offering potential solutions through biogas and digestate production. AD processes not only have the capability to reduce greenhouse gas emissions but also contribute to the production of renewable methane. This comprehensive review aims to consolidate prior research on AD involving different feedstocks. The principles of AD are explored and discussed, including both chemical and biological pathways and the microorganisms involved at each stage. Additionally, key variables influencing system performance, such as temperature, pH, and C/N ratio are also discussed. Various pretreatment strategies applied to enhance biogas generation from organic waste in AD are also reviewed. Furthermore, this review examines the conversion of generated digestate into biochar through pyrolysis and its utilization to improve AD performance. The addition of biochar has demonstrated its efficacy in enhancing metabolic processes, microorganisms (activity and community), and buffering capacity, facilitating Direct Interspecies Electron Transfer (DIET), and boosting CH4 production. Biochar also exhibits the ability to capture undesirable components, including CO2, H2S, NH3, and siloxanes. The integration of digestate-derived biochar into the circular economy framework emerges as a vital role in closing the material flow loop. Additionally, the review discusses the environmental benefits derived from coupling AD with pyrolysis processes, drawing on life cycle assessment investigations. Techno-economic assessment (TEA) studies of the integrated processes are also discussed, with an acknowledgment of the need for further TEA to validate the viability of integrating the biochar industry. Furthermore, this survey examines the techno-economic and environmental impacts of biochar production itself and its potential application in AD for biogas generation, aiming to establish a more cost-effective and sustainable integrated system.
Open AccessIntegration of Digestate-Derived Biochar into the Anaerobic Digestion Process through Circular Economic and Environmental Approaches—A Review
The growing energy consumption and the need for a circular economy have driven considerable interest in the anaerobic digestion (AD) of organic waste, offering potential solutions through biogas and digestate production. AD processes not only have the capability to reduce greenhouse gas emissions but also contribute to the production of renewable methane. This comprehensive review aims to consolidate prior research on AD involving different feedstocks. The principles of AD are explored and discussed, including both chemical and biological pathways and the microorganisms involved at each stage. Additionally, key variables influencing system performance, such as temperature, pH, and C/N ratio are also discussed. Various pretreatment strategies applied to enhance biogas generation from organic waste in AD are also reviewed. Furthermore, this review examines the conversion of generated digestate into biochar through pyrolysis and its utilization to improve AD performance. The addition of biochar has demonstrated its efficacy in enhancing metabolic processes, microorganisms (activity and community), and buffering capacity, facilitating Direct Interspecies Electron Transfer (DIET), and boosting CH4 production. Biochar also exhibits the ability to capture undesirable components, including CO2, H2S, NH3, and siloxanes. The integration of digestate-derived biochar into the circular economy framework emerges as a vital role in closing the material flow loop. Additionally, the review discusses the environmental benefits derived from coupling AD with pyrolysis processes, drawing on life cycle assessment investigations. Techno-economic assessment (TEA) studies of the integrated processes are also discussed, with an acknowledgment of the need for further TEA to validate the viability of integrating the biochar industry. Furthermore, this survey examines the techno-economic and environmental impacts of biochar production itself and its potential application in AD for biogas generation, aiming to establish a more cost-effective and sustainable integrated system.
- Open Access
A Detailed Database of the Chemical Properties and Methane Potential of Biomasses Covering a Large Range of Common Agricultural Biogas Plant Feedstocks
Agricultural biogas plants are increasingly being used in Europe as an alternative source of energy. To optimize the sizing and operation of existing or future biogas plants, a better knowledge of different feedstocks is needed. Our aim is to characterize 132 common agricultural feedstocks in terms of their chemical composition (proteins, fibers, elemental analysis, etc.) and biochemical methane potential shared in five families: agro-industrial products, silage and energy crops, lignocellulosic biomass, manure, and slurries. Among the families investigated, manures and slurries exhibited the highest ash and protein contents (10.3–13.7% DM). High variabilities in C/N were observed among the various families (19.5% DM for slurries and 131.7% DM for lignocellulosic biomass). Methane potentials have been reported to range from 63 Nm3 CH4/t VS (green waste) to 551 Nm3 CH4/t VS (duck slurry), with a mean value of 284 Nm3 CH4/t VS. In terms of biodegradability, lower values of 52% and 57% were reported for lignocelluloses biomasses and manures, respectively, due to their high fiber content, especially lignin. By contrast, animal slurries, silage, and energy crops exhibited a higher biodegradability of 70%. This database will be useful for project owners during the pre-study phases and during the operation of future agricultural biogas plants.
Open AccessA Detailed Database of the Chemical Properties and Methane Potential of Biomasses Covering a Large Range of Common Agricultural Biogas Plant Feedstocks
Agricultural biogas plants are increasingly being used in Europe as an alternative source of energy. To optimize the sizing and operation of existing or future biogas plants, a better knowledge of different feedstocks is needed. Our aim is to characterize 132 common agricultural feedstocks in terms of their chemical composition (proteins, fibers, elemental analysis, etc.) and biochemical methane potential shared in five families: agro-industrial products, silage and energy crops, lignocellulosic biomass, manure, and slurries. Among the families investigated, manures and slurries exhibited the highest ash and protein contents (10.3–13.7% DM). High variabilities in C/N were observed among the various families (19.5% DM for slurries and 131.7% DM for lignocellulosic biomass). Methane potentials have been reported to range from 63 Nm3 CH4/t VS (green waste) to 551 Nm3 CH4/t VS (duck slurry), with a mean value of 284 Nm3 CH4/t VS. In terms of biodegradability, lower values of 52% and 57% were reported for lignocelluloses biomasses and manures, respectively, due to their high fiber content, especially lignin. By contrast, animal slurries, silage, and energy crops exhibited a higher biodegradability of 70%. This database will be useful for project owners during the pre-study phases and during the operation of future agricultural biogas plants.
- Open Access
- 5 November 2021
- Published by MDPI AG in Bioengineering
- Vol. 8 (11) , 176
Impact of Operational Factors, Inoculum Origin, and Feedstock Preservation on the Biochemical Methane Potential
Anaerobic digestion for the valorization of organic wastes into biogas is gaining worldwide interest. Nonetheless, the sizing of the biogas plant units require knowledge of the quantity of feedstock, and their associated methane potentials, estimated widely by Biochemical Methane Potential (BMP) tests. Discrepancies exist among laboratories due to variability of protocols adopted and operational factors used. The aim of this study is to verify the influence of some operational factors (e.g., analysis frequency, trace elements and vitamins solution addition and flushing gas), feedstock conservation and the source of inoculum on BMP. Among the operational parameters tested on cellulose degradation, only the type of gas used for flushing headspace of BMP assays had shown a significant influence on methane yields from cellulose. Methane yields of 344 ± 6 NL CH4 kg−1 VS and 321 ± 10 NL CH4 kg−1 VS obtained from assays flushed with pure N2 and N2/CO2 (60/40 v/v). The origin of inoculum (fed in co-digestion) only significantly affected the methane yields for straw, 253 ± 3 and 333 ± 3 NL CH4 kg−1 VS. Finally, freezing/thawing cycle effect depended of the substrate (tested on biowaste, manure, straw and WWTP sludge) with a possible effect of water content substrate.
- 5 November 2021
- Published by MDPI AG in Bioengineering
- Vol. 8 (11) , 176
Open AccessImpact of Operational Factors, Inoculum Origin, and Feedstock Preservation on the Biochemical Methane Potential
Anaerobic digestion for the valorization of organic wastes into biogas is gaining worldwide interest. Nonetheless, the sizing of the biogas plant units require knowledge of the quantity of feedstock, and their associated methane potentials, estimated widely by Biochemical Methane Potential (BMP) tests. Discrepancies exist among laboratories due to variability of protocols adopted and operational factors used. The aim of this study is to verify the influence of some operational factors (e.g., analysis frequency, trace elements and vitamins solution addition and flushing gas), feedstock conservation and the source of inoculum on BMP. Among the operational parameters tested on cellulose degradation, only the type of gas used for flushing headspace of BMP assays had shown a significant influence on methane yields from cellulose. Methane yields of 344 ± 6 NL CH4 kg−1 VS and 321 ± 10 NL CH4 kg−1 VS obtained from assays flushed with pure N2 and N2/CO2 (60/40 v/v). The origin of inoculum (fed in co-digestion) only significantly affected the methane yields for straw, 253 ± 3 and 333 ± 3 NL CH4 kg−1 VS. Finally, freezing/thawing cycle effect depended of the substrate (tested on biowaste, manure, straw and WWTP sludge) with a possible effect of water content substrate.
- Open Access
Anaerobic Digestion of Wastewater Sludge and Alkaline-Pretreated Wheat Straw at Semi-Continuous Pilot Scale: Performances and Energy Assessment
During the last decade, the application of pretreatment has been investigated to enhance methane production from lignocellulosic biomass such as wheat straw (WS). Nonetheless, most of these studies were conducted in laboratory batch tests, potentially hiding instability problems or inhibition, which may fail in truly predicting full-scale reactor performance. For this purpose, the effect of an alkaline pretreatment on process performance and methane yields from WS (0.10 g NaOH g−1 WS at 90 °C for 1 h) co-digested with fresh wastewater sludge was evaluated in a pilot-scale reactor (20 L). Results showed that alkaline pretreatment resulted in better delignification (44%) and hemicellulose solubilization (62%) compared to untreated WS. Pilot-scale study showed that the alkaline pretreatment improved the methane production (261 ± 3 Nm3 CH4 t−1 VS) compared to untreated WS (201 ± 6 Nm3 CH4 t−1 VS). Stable process without any inhibition was observed and a high alkalinity was maintained in the reactor due to the NaOH used for pretreatment. The study thus confirms that alkaline pretreatment is a promising technology for full-scale application and could improve the overall economic benefits for biogas plant at 24 EUR t−1 VS treated, improve the energy recovery per unit organic matter, reduce the digestate volume and its disposal costs.
Open AccessAnaerobic Digestion of Wastewater Sludge and Alkaline-Pretreated Wheat Straw at Semi-Continuous Pilot Scale: Performances and Energy Assessment
During the last decade, the application of pretreatment has been investigated to enhance methane production from lignocellulosic biomass such as wheat straw (WS). Nonetheless, most of these studies were conducted in laboratory batch tests, potentially hiding instability problems or inhibition, which may fail in truly predicting full-scale reactor performance. For this purpose, the effect of an alkaline pretreatment on process performance and methane yields from WS (0.10 g NaOH g−1 WS at 90 °C for 1 h) co-digested with fresh wastewater sludge was evaluated in a pilot-scale reactor (20 L). Results showed that alkaline pretreatment resulted in better delignification (44%) and hemicellulose solubilization (62%) compared to untreated WS. Pilot-scale study showed that the alkaline pretreatment improved the methane production (261 ± 3 Nm3 CH4 t−1 VS) compared to untreated WS (201 ± 6 Nm3 CH4 t−1 VS). Stable process without any inhibition was observed and a high alkalinity was maintained in the reactor due to the NaOH used for pretreatment. The study thus confirms that alkaline pretreatment is a promising technology for full-scale application and could improve the overall economic benefits for biogas plant at 24 EUR t−1 VS treated, improve the energy recovery per unit organic matter, reduce the digestate volume and its disposal costs.
- Open Access
- 19 August 2021
- Published by Springer Nature in Research Square
Comparison and predesign cost assessment of ozonation, membrane filtration and activated carbon for the treatment of recalcitrant organics, a conceptual study
The presence of micropollutants in the environment is today of major concern. These pollutants could have long-term impacts on the environment and on population health. Biological treatment of wastewater is generally insufficient to allow their complete elimination. The establishment of efficient treatments is then needed to degrade the refractory organic matter. Activated carbon adsorption, membrane filtration and oxidation processes are common suitable solutions. All of them have advantages and are effective to treat wastewaters but drawbacks are well known such as waste production, energy consumption or by-products formation. This study aims at defining a strategy to choose the best option according to the nature of the wastewater and the treatment objectives. A methodology was designed for the rating of theses processes to choose the best strategy regarding environmental, technical and economic criteria. A simulation of three wastewater treatment scenarios was carried out to compare the costs of ozonation, adsorption and reverse osmosis. According to the result obtained, a decision tree is proposed to define the best option for a tertiary treatment to reach reuse or discharge objectives.
- 19 August 2021
- Published by Springer Nature in Research Square
Open AccessComparison and predesign cost assessment of ozonation, membrane filtration and activated carbon for the treatment of recalcitrant organics, a conceptual study
The presence of micropollutants in the environment is today of major concern. These pollutants could have long-term impacts on the environment and on population health. Biological treatment of wastewater is generally insufficient to allow their complete elimination. The establishment of efficient treatments is then needed to degrade the refractory organic matter. Activated carbon adsorption, membrane filtration and oxidation processes are common suitable solutions. All of them have advantages and are effective to treat wastewaters but drawbacks are well known such as waste production, energy consumption or by-products formation. This study aims at defining a strategy to choose the best option according to the nature of the wastewater and the treatment objectives. A methodology was designed for the rating of theses processes to choose the best strategy regarding environmental, technical and economic criteria. A simulation of three wastewater treatment scenarios was carried out to compare the costs of ozonation, adsorption and reverse osmosis. According to the result obtained, a decision tree is proposed to define the best option for a tertiary treatment to reach reuse or discharge objectives.