Vijender Kumar Sharma
Research Subjects
Vijender Kumar Sharma has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Jai Narayan Tripathi
Indian Institute of Technology Jodhpur, Jodhpur, India
4 shared publications - Hitesh Shrimali
School of Computing and Electrical Engineering, Indian Institute of Technology Mandi, Mandi, India
3 shared publications Hiten Advani
Synopsys Inc., Noida, India
1 shared publicationHitesh Shrimali
1 shared publicationJai Narayan Tripathi
1 shared publicationMuhammed Suhail Illikkal
Indian Institute of Technology Mandi, Kamand, Himachal Pradesh, India
1 shared publication
Latest Publications
- Open Access
- 14 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Nanotechnology
- Vol. 3, 199-209
Indefinite Admittance Matrix Based Modelling of PSIJ in Nano-Scale CMOS I/O Drivers
The past decade has witnessed a tremendous reduction in the feature size from the deep-submicron to the advanced nano-scale CMOS devices. In nanoscale devices based high-speed systems, the budgeting of jitter due to supply fluctuations is one of the major performance bottlenecks while designing integrated circuits (ICs). In this paper, an accurate and efficient method to analyse power supply induced jitter (PSIJ) in CMOS N-stage inverters is developed using the estimation-by-inspection method. Based on the Indefinite Admittance Matrix, a reduced two-port network is developed for a multiple-input circuit, considering the presence of the supply/bulk/ground sources. The closed-form expressions of the PSIJ have been evaluated for a single and N-stages CMOS inverter chain. The expression is also valid for the PSIJ analysis at any intermediate stage of the N-stage chain. For validation purpose, the circuits are designed in a standard 28 nm CMOS technology with V $_\mathrm{DD}$ of 1 V. The analytical results are compared with the simulation and the experiments. The maximum mean percentage error for EDA simulation and experimentally measured results are 2.4 % and 13 %, respectively. The proposed analysis is compared with some of the existing PSIJ modelling techniques and shows a significant improvement in speed-up factor and error percentage.
- 14 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Nanotechnology
- Vol. 3, 199-209
Open AccessIndefinite Admittance Matrix Based Modelling of PSIJ in Nano-Scale CMOS I/O Drivers
The past decade has witnessed a tremendous reduction in the feature size from the deep-submicron to the advanced nano-scale CMOS devices. In nanoscale devices based high-speed systems, the budgeting of jitter due to supply fluctuations is one of the major performance bottlenecks while designing integrated circuits (ICs). In this paper, an accurate and efficient method to analyse power supply induced jitter (PSIJ) in CMOS N-stage inverters is developed using the estimation-by-inspection method. Based on the Indefinite Admittance Matrix, a reduced two-port network is developed for a multiple-input circuit, considering the presence of the supply/bulk/ground sources. The closed-form expressions of the PSIJ have been evaluated for a single and N-stages CMOS inverter chain. The expression is also valid for the PSIJ analysis at any intermediate stage of the N-stage chain. For validation purpose, the circuits are designed in a standard 28 nm CMOS technology with V $_\mathrm{DD}$ of 1 V. The analytical results are compared with the simulation and the experiments. The maximum mean percentage error for EDA simulation and experimentally measured results are 2.4 % and 13 %, respectively. The proposed analysis is compared with some of the existing PSIJ modelling techniques and shows a significant improvement in speed-up factor and error percentage.
- Open Access
- 14 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 100172-100177
Novel Observations and Physical Insights on PSIJ Behavior in CMOS Chain-of-Inverters
This letter presents novel observations and physical insights on jitter in a chain of CMOS inverters. It is demonstrated that at the final output of the inverter chain, power supply induced jitter does not necessarily increase with the number of inverter stages. The presented investigation is validated by comparing the results using a semianalytical method with SPICE based simulations. The proposed observations are also validated using measurement results obtained by two measurement setups.
- 14 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 100172-100177
Open AccessNovel Observations and Physical Insights on PSIJ Behavior in CMOS Chain-of-Inverters
This letter presents novel observations and physical insights on jitter in a chain of CMOS inverters. It is demonstrated that at the final output of the inverter chain, power supply induced jitter does not necessarily increase with the number of inverter stages. The presented investigation is validated by comparing the results using a semianalytical method with SPICE based simulations. The proposed observations are also validated using measurement results obtained by two measurement setups.
- 6 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 12 (7) , 1130-1139
Design and Distortion Analysis of a Power Delivery Network in the Presence of Internal Supply Noise
This article presents a novel relationship between the duty cycle and power supply noise (PSN) for a feedback control circuit of a dc–dc buck converter. The derived relation is equally valid for the other high-speed circuits. Based on the derived relation, the closed-form expressions of the harmonics quantities for the dc–dc buck converter (including feedback circuitry) and power delivery network (PDN) are developed. The derived expressions of the distortions include the effect of small variations at the power supply and input dc terminals. A combination of two techniques, the Volterra series and the estimation-by-inspection methods, are used to derive the nonlinear quantities. The estimation-by-inspection method is used to model the feedback circuit, including the effects of PSN. The Volterra series derive the nonlinear quantities of the converter. The analytical results are compared with the simulation results for both the examples (designed in 180-nm LDMOS technology) in terms of mean percentage error (MPE) and computational (CPU) time.
- 6 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 12 (7) , 1130-1139
Design and Distortion Analysis of a Power Delivery Network in the Presence of Internal Supply Noise
This article presents a novel relationship between the duty cycle and power supply noise (PSN) for a feedback control circuit of a dc–dc buck converter. The derived relation is equally valid for the other high-speed circuits. Based on the derived relation, the closed-form expressions of the harmonics quantities for the dc–dc buck converter (including feedback circuitry) and power delivery network (PDN) are developed. The derived expressions of the distortions include the effect of small variations at the power supply and input dc terminals. A combination of two techniques, the Volterra series and the estimation-by-inspection methods, are used to derive the nonlinear quantities. The estimation-by-inspection method is used to model the feedback circuit, including the effects of PSN. The Volterra series derive the nonlinear quantities of the converter. The analytical results are compared with the simulation results for both the examples (designed in 180-nm LDMOS technology) in terms of mean percentage error (MPE) and computational (CPU) time.
- 1 September 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 127-130
Analysis of a serial link for power supply induced jitter
An analysis of power supply induced jitter in a high speed serial link is presented in this paper. An equivalent reduced model for serial link is used for the analysis. Jitter induced by the ripples in power delivery network is analyzed by a small signal equivalent model. The effect is modeled by a transfer function which is not technology specific and can be used generically for System-On-Chip (SoC) level design considerations. The analysis is supported by experimental results by simulation in 130nm BiCMoS RF technology and 28nm FDSOI technology (both technologies are of STMicroelectronics).
- 1 September 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 127-130
Analysis of a serial link for power supply induced jitter
An analysis of power supply induced jitter in a high speed serial link is presented in this paper. An equivalent reduced model for serial link is used for the analysis. Jitter induced by the ripples in power delivery network is analyzed by a small signal equivalent model. The effect is modeled by a transfer function which is not technology specific and can be used generically for System-On-Chip (SoC) level design considerations. The analysis is supported by experimental results by simulation in 130nm BiCMoS RF technology and 28nm FDSOI technology (both technologies are of STMicroelectronics).