Ömür Aras
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ömür Aras has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Enver Baydir
Department of Chemical Engineering, Faculty of Engineering and Natural Sciences, Bursa Technical University, Bursa, Turkey
7 shared publications - Gülşen Karaca
Department of Chemical Engineering, Faculty of Engineering and Natural Sciences Bursa Technical University Bursa Türkiye
2 shared publications - Yunus Kaya
Bursa Technical University
2 shared publications - Ahmet Aygun
Bursa Technical University
1 shared publication Bugra Akman
Faculty of Engineering and Natural Sciences, Department of Chemical Engineering, Bursa Technical University, Bursa, Turkey
1 shared publication- Bugra Akman
Department of Chemical Engineering, Faculty of Engineering and Natural Sciences, Bursa Technical University, Bursa, Turkey
1 shared publication
Latest Publications
- 18 August 2026
- Published by Wiley in Journal of Surfactants and Detergents
Process Intensification of PEG ‐Based Gemini Surfactants: Spacer Length, Alkyl Chain Length, and Halide (Cl/Br) on Textile Performance
In this study, the synthesis, characterization, and textile application performances of poly(ethylene glycol) (PEG)‐based next generation Gemini surfactants of the type C m ‐PEGn(Cl/Br)Es‐C m were investigated. Both conventional and microwave (MW) assisted methods were employed during the synthesis step and subsequently compared. It was determined that the MW method significantly reduced the reaction time (by approximately 50%) and enhanced efficiency. Structural verification of the synthesized compounds was conducted using FTIR, 1 H NMR, and TGA analyses. In the physicochemical investigations of the synthesized Gemini surfactants, the effects of hydrophobic tail length (C 12 –C 18 ) and hydrophilic spacer distance (PEG200–400) on the critical micelle concentration (CMC) were examined. The lowest CMC value of 4 mM was obtained with the long‐chain hydrophobic derivatives. In textile applications, the crease recovery angle (CRA) values imparted to the fabric by the synthesized Gemini surfactants through padding and exhaustion methods were measured. The results indicate that increasing hydrophobicity and decreasing spacer chain length significantly enhance the CRA performance as a mathematical representation of fabric hand in both the weft and warp directions of the fabric. These findings demonstrate that the developed Gemini surfactants have the potential to be utilized as functional softeners in textile finishing processes.
- 18 August 2026
- Published by Wiley in Journal of Surfactants and Detergents
Process Intensification of PEG ‐Based Gemini Surfactants: Spacer Length, Alkyl Chain Length, and Halide (Cl/Br) on Textile Performance
In this study, the synthesis, characterization, and textile application performances of poly(ethylene glycol) (PEG)‐based next generation Gemini surfactants of the type C m ‐PEGn(Cl/Br)Es‐C m were investigated. Both conventional and microwave (MW) assisted methods were employed during the synthesis step and subsequently compared. It was determined that the MW method significantly reduced the reaction time (by approximately 50%) and enhanced efficiency. Structural verification of the synthesized compounds was conducted using FTIR, 1 H NMR, and TGA analyses. In the physicochemical investigations of the synthesized Gemini surfactants, the effects of hydrophobic tail length (C 12 –C 18 ) and hydrophilic spacer distance (PEG200–400) on the critical micelle concentration (CMC) were examined. The lowest CMC value of 4 mM was obtained with the long‐chain hydrophobic derivatives. In textile applications, the crease recovery angle (CRA) values imparted to the fabric by the synthesized Gemini surfactants through padding and exhaustion methods were measured. The results indicate that increasing hydrophobicity and decreasing spacer chain length significantly enhance the CRA performance as a mathematical representation of fabric hand in both the weft and warp directions of the fabric. These findings demonstrate that the developed Gemini surfactants have the potential to be utilized as functional softeners in textile finishing processes.
- Open Access
- 9 August 2026
- Published by Echo Academic Publishing in Environmental Research and Technology
- Vol. 9 (4) , 606-619
Visible light assisted photocatalytic degradation of textile dye using Ag/ZnO doped g-C3N4 synthesized by an ultrasonic-assisted Co-precipitation method
Dyes cause environmental pollution and can be toxic to organisms. For these reasons, the removal of dyes gains importance. Photocatalytic treatment methods can effectively treat dyes with their superior advantages. This study aimed to investigate the removal of Telon Red A2R, used in carpet production, by photocatalytic oxidation with a silver and zinc oxide-doped graphitic carbon nitride (Ag/ZnO/g-C3N4) photocatalyst under visible light. A total of nine photocatalysts with different Ag-to-ZnO ratios were synthesized. In the study, the most suitable photocatalystand operating conditions for effective dye removal were determined using the response surface methodology (RSM) based on a central composite design (CCD), and optimization was achieved. The reaction was carried out in a batch reactor, and the effects of factors including photocatalyst concentration, ZnO, and Ag percentages in the catalyst and reaction time on dyestuff removal were investigated. The synthesized photocatalysts were characterized by Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), and X-ray diffraction (XRD). The most suitable catalyst and working conditions are a photocatalyst concentration of 0.95 g/L, a zinc oxide (ZnO) percentage of 115%, a silver (Ag) percentage of 11.5% (0.1Ag/ZnO/g-C3N4, and a reaction time of 2.5 hours. The dye removal efficiency with a 20 mg/L influent concentration is 78%. Photocatalyst concentration and Ag percentages had the highest and lowest effects on dye removal, respectively. Supporting the co-precipitation method with ultrasound in photocatalyst synthesis increases the photocatalyst efficiency.
- 9 August 2026
- Published by Echo Academic Publishing in Environmental Research and Technology
- Vol. 9 (4) , 606-619
Open AccessVisible light assisted photocatalytic degradation of textile dye using Ag/ZnO doped g-C3N4 synthesized by an ultrasonic-assisted Co-precipitation method
Dyes cause environmental pollution and can be toxic to organisms. For these reasons, the removal of dyes gains importance. Photocatalytic treatment methods can effectively treat dyes with their superior advantages. This study aimed to investigate the removal of Telon Red A2R, used in carpet production, by photocatalytic oxidation with a silver and zinc oxide-doped graphitic carbon nitride (Ag/ZnO/g-C3N4) photocatalyst under visible light. A total of nine photocatalysts with different Ag-to-ZnO ratios were synthesized. In the study, the most suitable photocatalystand operating conditions for effective dye removal were determined using the response surface methodology (RSM) based on a central composite design (CCD), and optimization was achieved. The reaction was carried out in a batch reactor, and the effects of factors including photocatalyst concentration, ZnO, and Ag percentages in the catalyst and reaction time on dyestuff removal were investigated. The synthesized photocatalysts were characterized by Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), and X-ray diffraction (XRD). The most suitable catalyst and working conditions are a photocatalyst concentration of 0.95 g/L, a zinc oxide (ZnO) percentage of 115%, a silver (Ag) percentage of 11.5% (0.1Ag/ZnO/g-C3N4, and a reaction time of 2.5 hours. The dye removal efficiency with a 20 mg/L influent concentration is 78%. Photocatalyst concentration and Ag percentages had the highest and lowest effects on dye removal, respectively. Supporting the co-precipitation method with ultrasound in photocatalyst synthesis increases the photocatalyst efficiency.
- 3 April 2026
- Published by Wiley in ChemistrySelect
- Vol. 11 (13)
Influence of Haloacetic Acid Type and Chain Length on Catalyst‐Assisted Esterification of Polyethylene Glycols
Biocompatible and water‐soluble polyethylene glycol (PEG) undergoes esterification with carboxylic acid derivatives, enabling the synthesis of functional materials for pharmaceuticals, controlled‐release systems, and textile modifications. Haloacetic acid derivatives are preferred due to their strong electron‐withdrawing properties and high reactivity. The resulting ester structures exhibit varying chemical and physical properties depending on the halogen used. Parameters such as the electronegativity, polarizability, and molecular volume of chlorine and bromine atoms provide essential insights into esterification kinetics and product behavior. In this study, esterification reactions between PEGs of different chain lengths (PEG 200, 300, and 400) and chloroacetic acid (ClCH 2 COOH) and bromoacetic acid (BrCH 2 COOH) were comparatively investigated. The reactions were carried out at various temperatures, and product conversion rates were monitored over time. The products were characterized using Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR) spectroscopy to observe changes in the ester carbonyl and PEG chain. Based on the experimental data, the effects of halogen type and PEG chain length on reaction kinetics and product formation were systematically evaluated. Additionally, the thermal properties were examined via thermogravimetric analysis (TGA). This study characterizes PEG‐based chloroesters (PEG n ClEs) and bromoesters (PEG n BrEs), providing a comprehensive evaluation of their synthesis and temporal variations.
- 3 April 2026
- Published by Wiley in ChemistrySelect
- Vol. 11 (13)
Influence of Haloacetic Acid Type and Chain Length on Catalyst‐Assisted Esterification of Polyethylene Glycols
Biocompatible and water‐soluble polyethylene glycol (PEG) undergoes esterification with carboxylic acid derivatives, enabling the synthesis of functional materials for pharmaceuticals, controlled‐release systems, and textile modifications. Haloacetic acid derivatives are preferred due to their strong electron‐withdrawing properties and high reactivity. The resulting ester structures exhibit varying chemical and physical properties depending on the halogen used. Parameters such as the electronegativity, polarizability, and molecular volume of chlorine and bromine atoms provide essential insights into esterification kinetics and product behavior. In this study, esterification reactions between PEGs of different chain lengths (PEG 200, 300, and 400) and chloroacetic acid (ClCH 2 COOH) and bromoacetic acid (BrCH 2 COOH) were comparatively investigated. The reactions were carried out at various temperatures, and product conversion rates were monitored over time. The products were characterized using Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR) spectroscopy to observe changes in the ester carbonyl and PEG chain. Based on the experimental data, the effects of halogen type and PEG chain length on reaction kinetics and product formation were systematically evaluated. Additionally, the thermal properties were examined via thermogravimetric analysis (TGA). This study characterizes PEG‐based chloroesters (PEG n ClEs) and bromoesters (PEG n BrEs), providing a comprehensive evaluation of their synthesis and temporal variations.
- 24 December 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 203
Synergy of 3D, porous supports and surface alkalinity tendency in Cu/ZnO catalysts for methanol steam reforming
- 24 December 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 203
Synergy of 3D, porous supports and surface alkalinity tendency in Cu/ZnO catalysts for methanol steam reforming
- 22 September 2025
- Published by Wiley in ChemistrySelect
- Vol. 10 (36)
AI‐Driven Modeling and Statistical Assessment of AgO/ZnO/g‐C3N4 Photocatalysts on Wastewater Treatment: Impact of UV–Visible Light
Minimizing the environmental impact of dye‐laden wastewater, remains a critical challenge with high economic implications. This study focuses on the development and optimization of g‐C3N4‐based photocatalysts doped with AgO and ZnO at varying Zn (0%–100%) and Ag (0%–2.5%) loadings. Catalysts were applied at four dosages (0.03–0.12 g/100 mL), and their methylene blue degradation efficiencies were evaluated over time intervals up to 3 h. Photocatalysts were synthesized using both conventional and ultrasound‐assisted (US‐assisted) co‐precipitation methods. The US‐assisted synthesis yielded improved morphology and dispersion, as evidenced by SEM‐EDS and XRD analyses, and enhanced photocatalytic performance. Experimental data were used to train three AI models; artificial neural network (ANN), support vector regression (SVR), and Random forest (RF). SVR exhibited the highest predictive accuracy (R2 = 0.9854, RMSE = 0.0401), while ANN and RF also showed strong performance (R2 ≈ 0.980). Model robustness was validated through residual analysis and statistical tests. To assess the influence of input variables, one‐way and multi‐factor Type II ANOVA were conducted. Zn and Ag content, catalyst dosage, and reaction time were all statistically significant (p < 0.05), with US treatment and Zn loading having the most dominant effects. Ag's contribution was also significant but more composition‐dependent.
- 22 September 2025
- Published by Wiley in ChemistrySelect
- Vol. 10 (36)
AI‐Driven Modeling and Statistical Assessment of AgO/ZnO/g‐C3N4 Photocatalysts on Wastewater Treatment: Impact of UV–Visible Light
Minimizing the environmental impact of dye‐laden wastewater, remains a critical challenge with high economic implications. This study focuses on the development and optimization of g‐C3N4‐based photocatalysts doped with AgO and ZnO at varying Zn (0%–100%) and Ag (0%–2.5%) loadings. Catalysts were applied at four dosages (0.03–0.12 g/100 mL), and their methylene blue degradation efficiencies were evaluated over time intervals up to 3 h. Photocatalysts were synthesized using both conventional and ultrasound‐assisted (US‐assisted) co‐precipitation methods. The US‐assisted synthesis yielded improved morphology and dispersion, as evidenced by SEM‐EDS and XRD analyses, and enhanced photocatalytic performance. Experimental data were used to train three AI models; artificial neural network (ANN), support vector regression (SVR), and Random forest (RF). SVR exhibited the highest predictive accuracy (R2 = 0.9854, RMSE = 0.0401), while ANN and RF also showed strong performance (R2 ≈ 0.980). Model robustness was validated through residual analysis and statistical tests. To assess the influence of input variables, one‐way and multi‐factor Type II ANOVA were conducted. Zn and Ag content, catalyst dosage, and reaction time were all statistically significant (p < 0.05), with US treatment and Zn loading having the most dominant effects. Ag's contribution was also significant but more composition‐dependent.
- 18 May 2025
- Published by Elsevier in Materials Today Communications
- Vol. 46
Machine learning modeling of ceramic beads: Impact of PVA and water on porosity and strength
- 18 May 2025
- Published by Elsevier in Materials Today Communications
- Vol. 46
Machine learning modeling of ceramic beads: Impact of PVA and water on porosity and strength
- Open Access
- 2 December 2024
- Published by Turkish Journal of Forestry in Turkish Journal of Forestry | Türkiye Ormancılık Dergisi
- Vol. 25 (4) , 520-529
Ekstraksiyon reçinesinden (Crude wood resin) AlCl3 eşliğinde fenolik reçinelerin polimerizasyonu ve modellenmesi
Artan çevre sorunlarıyla birlikte, çevreye toksik etkisi daha az olan ve biyolojik olarak parçalanabilen doğal polimerlere olan ilgi her geçen gün artmaktadır. Doğal reçine, gelecek vaat eden değerli yenilenebilir bir odun dışı orman ürünü olup, birçok biyokimyasal ürünün üretilmesinde doğal bir kaynak olarak kullanılmaktadır. Bu çalışmada, yenilikçi bir polimerizasyon tekniği ile ekstraksiyon reçinesi (Crude Wood Resin), terebentin ve fenolden AlCl3 eşliğinde terpen-rosin fenolik reçine (TRFR) sentezlenmesi amaçlanmaktadır. Sentez aşamasına geçmeden önce ham reçine distilasyon ile terebentin ve kolofana ayrılmış ve gaz kromotografi - kütle spektroskopisi (GC-MS) cihazı ile karakterize edilmiştir. Sentezlenen TRFR örnekleri, Fourier Dönüşümü Kızılötesi Spektroskopisi (FTIR), Nükleer Manyetik Rezonans Spektroskopisi (NMR), asit sayısı, sabunlaşma sayısı ve yumuşama noktası analizleri ile karakterize edilmiştir. Ayrıca, sentez reaksiyonlarının modellemesi Yapay Sinir Ağı (YSA) 2 girdi (sıcaklık ve terebentin/ekstraksiyon reçine oranı) ve 4 çıktı (reaksiyon verimi, asit değeri, sabunlaşma değeri ve yumuşama noktası) ile tasarlanmıştır. En yüksek reaksiyon verimi 60°C’de üretilen, terebentin/ekstraksiyon reçine oranının 1/2 olduğu örnekte bulunmuştur. En düşük asit ve sabunlaşma değerleri sırasıyla 90,79 ve 103,79 mg KOH/g olarak hesaplanmıştır. En yüksek yumuşama noktası 79°C olarak bulunmuştur.
- 2 December 2024
- Published by Turkish Journal of Forestry in Turkish Journal of Forestry | Türkiye Ormancılık Dergisi
- Vol. 25 (4) , 520-529
Open AccessEkstraksiyon reçinesinden (Crude wood resin) AlCl3 eşliğinde fenolik reçinelerin polimerizasyonu ve modellenmesi
Artan çevre sorunlarıyla birlikte, çevreye toksik etkisi daha az olan ve biyolojik olarak parçalanabilen doğal polimerlere olan ilgi her geçen gün artmaktadır. Doğal reçine, gelecek vaat eden değerli yenilenebilir bir odun dışı orman ürünü olup, birçok biyokimyasal ürünün üretilmesinde doğal bir kaynak olarak kullanılmaktadır. Bu çalışmada, yenilikçi bir polimerizasyon tekniği ile ekstraksiyon reçinesi (Crude Wood Resin), terebentin ve fenolden AlCl3 eşliğinde terpen-rosin fenolik reçine (TRFR) sentezlenmesi amaçlanmaktadır. Sentez aşamasına geçmeden önce ham reçine distilasyon ile terebentin ve kolofana ayrılmış ve gaz kromotografi - kütle spektroskopisi (GC-MS) cihazı ile karakterize edilmiştir. Sentezlenen TRFR örnekleri, Fourier Dönüşümü Kızılötesi Spektroskopisi (FTIR), Nükleer Manyetik Rezonans Spektroskopisi (NMR), asit sayısı, sabunlaşma sayısı ve yumuşama noktası analizleri ile karakterize edilmiştir. Ayrıca, sentez reaksiyonlarının modellemesi Yapay Sinir Ağı (YSA) 2 girdi (sıcaklık ve terebentin/ekstraksiyon reçine oranı) ve 4 çıktı (reaksiyon verimi, asit değeri, sabunlaşma değeri ve yumuşama noktası) ile tasarlanmıştır. En yüksek reaksiyon verimi 60°C’de üretilen, terebentin/ekstraksiyon reçine oranının 1/2 olduğu örnekte bulunmuştur. En düşük asit ve sabunlaşma değerleri sırasıyla 90,79 ve 103,79 mg KOH/g olarak hesaplanmıştır. En yüksek yumuşama noktası 79°C olarak bulunmuştur.
- 4 February 2022
- Published by Springer Nature in Applied Physics A
- Vol. 128 (3) , 1-11
Effect of pre-anodizing, electrocoating processes and fatty acid chain length on morphology, roughness and durability of ZnO-coated superhydrophobic surfaces
- 4 February 2022
- Published by Springer Nature in Applied Physics A
- Vol. 128 (3) , 1-11
Effect of pre-anodizing, electrocoating processes and fatty acid chain length on morphology, roughness and durability of ZnO-coated superhydrophobic surfaces