Yin-Shan Huang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Yin-Shan Huang has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Liang Zhou
Shanghai Jiao Tong University
12 shared publications - Cheng-Rui Zhang
State Key Laboratory of Radio Frequency Heterogeneous Integration, Shanghai Jiao Tong University, Shanghai, China
8 shared publications - Junfa Mao
Shanghai Jiao Tong University
5 shared publications - Dong-Xin Ni
Nanjing University of Science and Technology, Nanjing, China
4 shared publications - Qihao Xu
State Key Laboratory of Radio Frequency Heterogeneous Integration, Shanghai Jiao Tong University, Shanghai, China
4 shared publications - Wang-Wen Xu
State Key Laboratory of Radio Frequency Heterogeneous Integration, Shanghai Jiao Tong University, Shanghai, China
3 shared publications
Latest Publications
- 29 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. PP (21563950) , 1
Bandwidth Enhancement of Low-Profile Glass-Based Substrate Integrated Cavity Antenna-in-Package
This article proposes a wideband, low-profile, glass-based antenna-in-package (AiP) by loading an asymmetrical artificial magnetic conductor (AMC). A compact substrate integrated cavity (SIC) antenna element with a low profile of 0.09 λ0 is designed by incorporating an AMC structure on the top surface. By employing an asymmetrical AMC, the antenna mode is modified to operate at two different frequencies, thereby extending the impedance bandwidth. Therefore, the antenna’s impedance bandwidth is improved from 13.7 % to 20 %. A 2 × 2 SIC antenna array is also designed, using a two-stage balun based on thin-film benzocyclobutene (BCB) to ensure high boresight gain across different frequency points. The SIC antenna array is fabricated using through-glass via (TGV) technology and a silicon-based micro-electro-mechanical systems (MEMS) photosensitive composite film. The measured relative impedance bandwidth of the proposed antenna array is 27.9 % (83 – 110 GHz). The measured peak gain reaches 10.2 dBi, with a 3-dB gain bandwidth exceeding 27 GHz. The proposed antenna can be further integrated using 3D heterogeneous processes with other components to achieve low interconnection loss, thereby enhancing high-frequency performance for future millimeter-wave radar and communication systems.
- 29 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. PP (21563950) , 1
Bandwidth Enhancement of Low-Profile Glass-Based Substrate Integrated Cavity Antenna-in-Package
This article proposes a wideband, low-profile, glass-based antenna-in-package (AiP) by loading an asymmetrical artificial magnetic conductor (AMC). A compact substrate integrated cavity (SIC) antenna element with a low profile of 0.09 λ0 is designed by incorporating an AMC structure on the top surface. By employing an asymmetrical AMC, the antenna mode is modified to operate at two different frequencies, thereby extending the impedance bandwidth. Therefore, the antenna’s impedance bandwidth is improved from 13.7 % to 20 %. A 2 × 2 SIC antenna array is also designed, using a two-stage balun based on thin-film benzocyclobutene (BCB) to ensure high boresight gain across different frequency points. The SIC antenna array is fabricated using through-glass via (TGV) technology and a silicon-based micro-electro-mechanical systems (MEMS) photosensitive composite film. The measured relative impedance bandwidth of the proposed antenna array is 27.9 % (83 – 110 GHz). The measured peak gain reaches 10.2 dBi, with a 3-dB gain bandwidth exceeding 27 GHz. The proposed antenna can be further integrated using 3D heterogeneous processes with other components to achieve low interconnection loss, thereby enhancing high-frequency performance for future millimeter-wave radar and communication systems.
- Open Access
- 28 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 82637-82654
A W-Band 3-D Heterogeneously Integrated Radar Transmitter and Receiver
For W-band millimeter-wave radars, chip and packaging designs are often independent. The chip architecture may restrict packaging flexibility, forcing the adoption of high-loss wire bonding, and this independent design is prone to inter-chip near-field coupling in high-density integration. Furthermore, W-band millimeter-wave radars are typically implemented using system-on-chip (SoC) architectures based on a single semiconductor process. Silicon-based processes offer superior integration density, whereas III-V compound semiconductors, such as gallium nitride (GaN) and indium phosphide (InP), exhibit better power and noise. Consequently, a single semiconductor process cannot simultaneously achieve the design goals of high power, low noise, and a compact size. In this work, co-design and co-simulation were carried out for W-band power amplifiers (PAs), octuplers, mixers, and their packaging structures. Three-dimensional integration (3-D) and low-loss interconnection between complementary metal and oxide–semiconductor (CMOS) chips were realized using an in-house developed silicon-based micro-electro-mechanical system (MEMS) photosensitive composite benzocyclobutene (BCB) process and micro-bump bonding technology. GaN PAs, InP low-noise amplifiers (LNAs), and antenna-in-package (AiP) were further integrated to realize system-level 3-D heterogeneous integration (HI). The 3-D HI radar transmitter and receiver operated over a frequency range of 91.8 GHz to 94.2 GHz. At 93 GHz, the calculated saturated output power was 30.75 dBm based on 37 dBm effective isotropic radiated power (EIRP) and 6.25 dBi antenna gain, and the calculated noise figure was 7.45 dB based on the measured sub-component performance. The radar exhibited a range resolution of 7 cm, with a chip area of 7.42 mm² (excluding the feed structure).
- 28 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 82637-82654
Open AccessA W-Band 3-D Heterogeneously Integrated Radar Transmitter and Receiver
For W-band millimeter-wave radars, chip and packaging designs are often independent. The chip architecture may restrict packaging flexibility, forcing the adoption of high-loss wire bonding, and this independent design is prone to inter-chip near-field coupling in high-density integration. Furthermore, W-band millimeter-wave radars are typically implemented using system-on-chip (SoC) architectures based on a single semiconductor process. Silicon-based processes offer superior integration density, whereas III-V compound semiconductors, such as gallium nitride (GaN) and indium phosphide (InP), exhibit better power and noise. Consequently, a single semiconductor process cannot simultaneously achieve the design goals of high power, low noise, and a compact size. In this work, co-design and co-simulation were carried out for W-band power amplifiers (PAs), octuplers, mixers, and their packaging structures. Three-dimensional integration (3-D) and low-loss interconnection between complementary metal and oxide–semiconductor (CMOS) chips were realized using an in-house developed silicon-based micro-electro-mechanical system (MEMS) photosensitive composite benzocyclobutene (BCB) process and micro-bump bonding technology. GaN PAs, InP low-noise amplifiers (LNAs), and antenna-in-package (AiP) were further integrated to realize system-level 3-D heterogeneous integration (HI). The 3-D HI radar transmitter and receiver operated over a frequency range of 91.8 GHz to 94.2 GHz. At 93 GHz, the calculated saturated output power was 30.75 dBm based on 37 dBm effective isotropic radiated power (EIRP) and 6.25 dBi antenna gain, and the calculated noise figure was 7.45 dB based on the measured sub-component performance. The radar exhibited a range resolution of 7 cm, with a chip area of 7.42 mm² (excluding the feed structure).
- 12 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (6) , 5158-5167
W-Band Broadband and High-Gain Metasurface-Inspired Stack-Up Patch Antenna for 3-D Heterogeneous Integration
This paper presents the design of a broadband, high-gain, metasurface-inspired stack-up patch antenna. Two interdigital capacitors (IDCs) are symmetrically incorporated to introduce strong capacitive effects, enhancing impedance matching and enabling size reduction in the driven patch layer. This layer is then stacked with metasurface patches to further broaden the impedance bandwidth and enhance the gain. Characteristic mode analysis (CMA) is employed to guide the design of the metasurface antenna and to explain the mode behaviors. The integration of SUEX dry film ensures precise patterning and mechanical robustness, whereas the benzocyclobutene (BCB) substrate contributes to reduced dielectric loss, resulting in a low-profile, high-gain, and wideband antenna based on an in-house silicon-based MEMS photosensitive composite film. Simulated and measured results show excellent agreement, with the measured peak gain reaching 9.3 dBi at 94 GHz and a 10-dB impedance bandwidth ranging from 78 GHz to 102 GHz. This antenna can be further three-dimensionally integrated with other active components, resulting in compact millimeter-wave heterogeneous integration systems.
- 12 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (6) , 5158-5167
W-Band Broadband and High-Gain Metasurface-Inspired Stack-Up Patch Antenna for 3-D Heterogeneous Integration
This paper presents the design of a broadband, high-gain, metasurface-inspired stack-up patch antenna. Two interdigital capacitors (IDCs) are symmetrically incorporated to introduce strong capacitive effects, enhancing impedance matching and enabling size reduction in the driven patch layer. This layer is then stacked with metasurface patches to further broaden the impedance bandwidth and enhance the gain. Characteristic mode analysis (CMA) is employed to guide the design of the metasurface antenna and to explain the mode behaviors. The integration of SUEX dry film ensures precise patterning and mechanical robustness, whereas the benzocyclobutene (BCB) substrate contributes to reduced dielectric loss, resulting in a low-profile, high-gain, and wideband antenna based on an in-house silicon-based MEMS photosensitive composite film. Simulated and measured results show excellent agreement, with the measured peak gain reaching 9.3 dBi at 94 GHz and a 10-dB impedance bandwidth ranging from 78 GHz to 102 GHz. This antenna can be further three-dimensionally integrated with other active components, resulting in compact millimeter-wave heterogeneous integration systems.
- 16 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (4) , 3058-3067
W-Band High-Gain Glass-Based Substrate-Integrated Cavity Antennas for Heterogeneous Integration Applications
This study presents a gain-enhanced substrate integrated cavity antenna that operates in the W-band. First, the radiator’s mode is analyzed, after which a pair of patches with shorting pillars is symmetrically designed to reduce the profile and tune the impedance without affecting the antenna’s radiation performance. A gain improvement of 3.9 dB is obtained by optimizing the length of the radiator. The radiator is then bonded on a silicon interposer on which a benzocyclobutene-based coplanar waveguide with ground to glass-based SIW transition structure is designed by considering low-loss interconnections. Thereafter, a 1×1 glass-based antenna and a 1×4 antenna array were fabricated using through-glass via technology. Results showed peak gains of 10.2 and 14.7 dBi with bandwidths of 25.6% and 31.5%, respectively. The proposed antennas can be further integrated three-dimensionally with other active components.
- 16 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (4) , 3058-3067
W-Band High-Gain Glass-Based Substrate-Integrated Cavity Antennas for Heterogeneous Integration Applications
This study presents a gain-enhanced substrate integrated cavity antenna that operates in the W-band. First, the radiator’s mode is analyzed, after which a pair of patches with shorting pillars is symmetrically designed to reduce the profile and tune the impedance without affecting the antenna’s radiation performance. A gain improvement of 3.9 dB is obtained by optimizing the length of the radiator. The radiator is then bonded on a silicon interposer on which a benzocyclobutene-based coplanar waveguide with ground to glass-based SIW transition structure is designed by considering low-loss interconnections. Thereafter, a 1×1 glass-based antenna and a 1×4 antenna array were fabricated using through-glass via technology. Results showed peak gains of 10.2 and 14.7 dBi with bandwidths of 25.6% and 31.5%, respectively. The proposed antennas can be further integrated three-dimensionally with other active components.
- 20 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 15 (5) , 1060-1071
A 3-D Phased Array Transmitter With Circuit and Package Codesign of a Phase Shifter and a Power Amplifier at W Band
This study proposes the design, fabrication, and testing of a three-dimensional (3-D) integrated transmitter operating at W-band. Detailed analyses of the performance variations before and after packaging of the phase shifter (PS) and power amplifier (PA) are provided, along with specific design processes. The circuit and packaging of the PS and PA are co-designed to maintain their performance and minimize proximity effects during 3-D integration at millimeter-wave frequencies. The PS achieves a -6.4 dB loss at 100 GHz, with a phase root mean square (RMS) error of 1.11° and a gain RMS error of 0.855 dB. The PA achieves a maximum gain of 19.5 dB at 103 GHz, with a bandwidth from 99.2 GHz to 106.7 GHz and a saturated output power of 13 dBm. Both the PS and PA are individually packaged using proprietary silicon-based MEMS through-silicon-trench technology and multi-layer photosensitive composite film. Finally, a 3-D integration of the transmitter system is realized using micro-bumps based on 3-D transition structures.
- 20 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 15 (5) , 1060-1071
A 3-D Phased Array Transmitter With Circuit and Package Codesign of a Phase Shifter and a Power Amplifier at W Band
This study proposes the design, fabrication, and testing of a three-dimensional (3-D) integrated transmitter operating at W-band. Detailed analyses of the performance variations before and after packaging of the phase shifter (PS) and power amplifier (PA) are provided, along with specific design processes. The circuit and packaging of the PS and PA are co-designed to maintain their performance and minimize proximity effects during 3-D integration at millimeter-wave frequencies. The PS achieves a -6.4 dB loss at 100 GHz, with a phase root mean square (RMS) error of 1.11° and a gain RMS error of 0.855 dB. The PA achieves a maximum gain of 19.5 dB at 103 GHz, with a bandwidth from 99.2 GHz to 106.7 GHz and a saturated output power of 13 dBm. Both the PS and PA are individually packaged using proprietary silicon-based MEMS through-silicon-trench technology and multi-layer photosensitive composite film. Finally, a 3-D integration of the transmitter system is realized using micro-bumps based on 3-D transition structures.
- 2 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (3) , 636-640
Low-Profile Self-Packaged Multimode SIW Antenna With Low-Loss Air-Bridge Interconnection
This paper presents a design of a self-packaged multimode antenna at the W band. The modes of the aperture antenna are analyzed. An additive resonant mode is excited by introducing a radiation patch. A metal post is inserted in the resonance cavity to suppress an undesired mode. The multimode antenna is embedded in a silicon interposer with air bridge in wafer-level packaging. The insertion loss of the air bridge with CPWGs are measured. The proposed antenna is fabricated by using in-house silicon-based MEMS photosensitive composite film fabrication process. The measured gain is 7 dBi at 92 GHz with an impedance bandwidth of 81.4–109 GHz. The self-packaged antenna shows some advantages and can be further integrated with other components.
- 2 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (3) , 636-640
Low-Profile Self-Packaged Multimode SIW Antenna With Low-Loss Air-Bridge Interconnection
This paper presents a design of a self-packaged multimode antenna at the W band. The modes of the aperture antenna are analyzed. An additive resonant mode is excited by introducing a radiation patch. A metal post is inserted in the resonance cavity to suppress an undesired mode. The multimode antenna is embedded in a silicon interposer with air bridge in wafer-level packaging. The insertion loss of the air bridge with CPWGs are measured. The proposed antenna is fabricated by using in-house silicon-based MEMS photosensitive composite film fabrication process. The measured gain is 7 dBi at 92 GHz with an impedance bandwidth of 81.4–109 GHz. The self-packaged antenna shows some advantages and can be further integrated with other components.
- Open Access
- 30 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 4 (4) , 767-776
A D-Band Self-Packaged Low Loss Grounded Coplanar Waveguide to Rectangular Waveguide Transition With Silicon-Based Air Cavity-Backed Structure
A novel D-band self-packaged silicon-based air cavity-backed transition from grounded coplanar waveguide to air-filled rectangular waveguide was investigated, fabricated, and measured in this work. The equivalent circuit model was established and analyzed in detail, and design procedures are given. The calculated, simulated, and measured S-parameters of the transition show some agreement. The minimum measured insertion loss of the proposed transition is 1.1 dB at 147 GHz with a fractional 3-dB bandwidth of 10.2%. This transition demonstrates outstanding performance of low loss and profile compared with state-of-the art works in our in-house silicon-based MEMS photosensitive composite film fabrication process. It can be further used in a high-performance joint radar communication system in packaging.
- 30 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 4 (4) , 767-776
Open AccessA D-Band Self-Packaged Low Loss Grounded Coplanar Waveguide to Rectangular Waveguide Transition With Silicon-Based Air Cavity-Backed Structure
A novel D-band self-packaged silicon-based air cavity-backed transition from grounded coplanar waveguide to air-filled rectangular waveguide was investigated, fabricated, and measured in this work. The equivalent circuit model was established and analyzed in detail, and design procedures are given. The calculated, simulated, and measured S-parameters of the transition show some agreement. The minimum measured insertion loss of the proposed transition is 1.1 dB at 147 GHz with a fractional 3-dB bandwidth of 10.2%. This transition demonstrates outstanding performance of low loss and profile compared with state-of-the art works in our in-house silicon-based MEMS photosensitive composite film fabrication process. It can be further used in a high-performance joint radar communication system in packaging.
- 10 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (8) , 6298-6308
A Broadband D-Band Cavity-Backed Coupled-Feed Patch Antenna in Wafer-Level Package Based on Heterogeneous Integrations
This paper proposes a broadband cavity-backed coupled-feed patch antenna in wafer-level package for D-band wireless communications. In the Si-wafer, a metal cavity is etched right below the patch antenna to increase the thickness of the substrate under the patch. Through the heterogeneous integration technique, the cavity is filled with Rogers 5880 substrate with a thickness of 274 μm. A 20-μm-thick benzocyclobutene (BCB) thin-film is served as the interconnection layer on the Si-wafer, enabling low-loss interconnection with RFICs through vias and transmission lines. The antenna placed on the BCB layer is excited by coupled-feed method, which can improve the design flexibility and further increase the bandwidth. The electric field distributions are used to analyze the antenna working principle, and an equivalent circuit model is developed based on it for analyzing the factors that affect impedance matching. The single antenna element and its array both feature broadband performance with stable gain and high efficiency. The antenna array is differentially excited by a balun to avoid beam deviation and to suppress cross polarization.
- 10 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (8) , 6298-6308
A Broadband D-Band Cavity-Backed Coupled-Feed Patch Antenna in Wafer-Level Package Based on Heterogeneous Integrations
This paper proposes a broadband cavity-backed coupled-feed patch antenna in wafer-level package for D-band wireless communications. In the Si-wafer, a metal cavity is etched right below the patch antenna to increase the thickness of the substrate under the patch. Through the heterogeneous integration technique, the cavity is filled with Rogers 5880 substrate with a thickness of 274 μm. A 20-μm-thick benzocyclobutene (BCB) thin-film is served as the interconnection layer on the Si-wafer, enabling low-loss interconnection with RFICs through vias and transmission lines. The antenna placed on the BCB layer is excited by coupled-feed method, which can improve the design flexibility and further increase the bandwidth. The electric field distributions are used to analyze the antenna working principle, and an equivalent circuit model is developed based on it for analyzing the factors that affect impedance matching. The single antenna element and its array both feature broadband performance with stable gain and high efficiency. The antenna array is differentially excited by a balun to avoid beam deviation and to suppress cross polarization.
- 7 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (6) , 3772-3787
A 1T2R Heterogeneously Integrated Phased-Array FMCW Radar Transceiver With AMC-Based Antenna in Package in the W-Band
This article presents a novel 30.5-dBm output power 1 transmitter and 2 receivers (1T2R) heterogeneously integrated (HI) phased-array frequency-modulated continuous-wave (FMCW) radar transceiver using local oscillator (LO) phase shifting (PS). Two $X$ -band GaAs-based 6-bit PSs are designed and placed at the LO path. Two $W$ -band GaN-based power amplifiers (PAs) are proposed, amplifying the FMCW signals with 30.5 dBm at output. The antenna in package (AiP) is designed and fabricated in a high-resistivity silicon wafer by combining through silicon ring-trench and artificial magnetic conductor (AMC), where the 1 $\times$ 4 antenna array has a high radiation efficiency (70%), a broadband (12%), and a high gain (11.8 dBi) in the $W$ -band. Two $W$ -band SiGe-based transceiver systems on a chip, GaN-based PAs, AMC-based AiPs, and two $X$ -band GaAs PSs are HI with a transceiver size of 31 $\times$ 17 mm $^{{2}}$ by using our in-house silicon-based MEMS photosensitive composite film given the advantages of high-density integration and fabrication accuracy. The HI radar application is measured with an effective isotropic radiated power of 41 dBm with a measured 2 cm range resolution. The beam scanning performance is also measured and presented using three corner reflectors located at different azimuths. Simulated and measured beamforming results show good agreement. The HI radar sensor has a size of 70 $\times$ 70 mm $^{{2}}$ with a weight of only 200 g.
- 7 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (6) , 3772-3787
A 1T2R Heterogeneously Integrated Phased-Array FMCW Radar Transceiver With AMC-Based Antenna in Package in the W-Band
This article presents a novel 30.5-dBm output power 1 transmitter and 2 receivers (1T2R) heterogeneously integrated (HI) phased-array frequency-modulated continuous-wave (FMCW) radar transceiver using local oscillator (LO) phase shifting (PS). Two $X$ -band GaAs-based 6-bit PSs are designed and placed at the LO path. Two $W$ -band GaN-based power amplifiers (PAs) are proposed, amplifying the FMCW signals with 30.5 dBm at output. The antenna in package (AiP) is designed and fabricated in a high-resistivity silicon wafer by combining through silicon ring-trench and artificial magnetic conductor (AMC), where the 1 $\times$ 4 antenna array has a high radiation efficiency (70%), a broadband (12%), and a high gain (11.8 dBi) in the $W$ -band. Two $W$ -band SiGe-based transceiver systems on a chip, GaN-based PAs, AMC-based AiPs, and two $X$ -band GaAs PSs are HI with a transceiver size of 31 $\times$ 17 mm $^{{2}}$ by using our in-house silicon-based MEMS photosensitive composite film given the advantages of high-density integration and fabrication accuracy. The HI radar application is measured with an effective isotropic radiated power of 41 dBm with a measured 2 cm range resolution. The beam scanning performance is also measured and presented using three corner reflectors located at different azimuths. Simulated and measured beamforming results show good agreement. The HI radar sensor has a size of 70 $\times$ 70 mm $^{{2}}$ with a weight of only 200 g.
- 15 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 71 (11) , 9024-9029
Wideband and Low-Profile High-Resistivity Silicon-Based Dielectric Resonant Antennas by Loading AMC
This communication presents the design of high resistivity silicon-based dielectric resonant antennas (DRAs) by using microelectromechanical systems (MEMS) technology. A stair-stepping driven patch fed by through silicon via (TSV) is specifically designed with a U-shaped slot that can reduce the inductive of TSV. An air cavity between dielectric resonator and driven patch is used to enhance the gain and bandwidth of DRA. The measured impedance bandwidth (-10 dB) of the Ka band DRA is from 27 GHz to 43 GHz with a maximum gain 6.5 dB and 95 % radiation efficiency at 38 GHz. The size of our proposed antenna is only 0.48 λ 0 × 0.48 λ 0 × 0.14 λ 0 . The thickness of our proposed Ku band DRA can be further reduced from 0.14 λ 0 to 0.06 λ 0 by loading an artificial magnetic conductor (AMC) structure on the top surface of DR. A Ku band antenna is fabricated as an example. The measured fraction bandwidth (FBW) is 33% (-10 dB) from 14.2 GHz to 19.8 GHz with a maximum gain of 6.5 dB and 94.7 % radiation efficiency at 18 GHz. Good agreements between the simulated and measured results are obtained for both DRAs. The size of our proposed Ku band antenna is only 0.51 λ 0 × 0.51 λ 0 × 0.06 λ 0 . The proposed DRAs can be further 3D-integrated with other components by using bumps for future millimeter wave phased-array radar and communication systems.
- 15 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 71 (11) , 9024-9029
Wideband and Low-Profile High-Resistivity Silicon-Based Dielectric Resonant Antennas by Loading AMC
This communication presents the design of high resistivity silicon-based dielectric resonant antennas (DRAs) by using microelectromechanical systems (MEMS) technology. A stair-stepping driven patch fed by through silicon via (TSV) is specifically designed with a U-shaped slot that can reduce the inductive of TSV. An air cavity between dielectric resonator and driven patch is used to enhance the gain and bandwidth of DRA. The measured impedance bandwidth (-10 dB) of the Ka band DRA is from 27 GHz to 43 GHz with a maximum gain 6.5 dB and 95 % radiation efficiency at 38 GHz. The size of our proposed antenna is only 0.48 λ 0 × 0.48 λ 0 × 0.14 λ 0 . The thickness of our proposed Ku band DRA can be further reduced from 0.14 λ 0 to 0.06 λ 0 by loading an artificial magnetic conductor (AMC) structure on the top surface of DR. A Ku band antenna is fabricated as an example. The measured fraction bandwidth (FBW) is 33% (-10 dB) from 14.2 GHz to 19.8 GHz with a maximum gain of 6.5 dB and 94.7 % radiation efficiency at 18 GHz. Good agreements between the simulated and measured results are obtained for both DRAs. The size of our proposed Ku band antenna is only 0.51 λ 0 × 0.51 λ 0 × 0.06 λ 0 . The proposed DRAs can be further 3D-integrated with other components by using bumps for future millimeter wave phased-array radar and communication systems.