MBMarko Bacic

Marko Bacic

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Marko Bacic has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Integrated Hybrid Engine Cycle Design and Power Management Optimization

    by Raj Ghelani, Ioannis Roumeliotis, Chana Anna Saias, Christos Mourouzidis, Vassilios Pachidis, Justin Norman, Marko Bacic

    A novel integrated gas turbine cycle design and power management optimization methodology for parallel hybrid electric propulsion architectures is presented in this paper. The gas turbine multipoint cycle design method is extended to turboprop and turbofan architectures, and several trade studies are performed initially at the cycle level. It is shown that the maximum degree of electrification is limited by the surge margin levels of the booster in the turbofan configuration. An aircraft mission-level assessment is then performed using the integrated optimization method initially for an A320 Neo style aircraft case. The results indicate that the optimal cycle redesigned hybrid electric propulsion system (HEPS) favors takeoff and climb power on-takes while optimal retrofit HEPS favor cruise power on-takes. It is shown that for current battery energy density (250 Wh/Kg), there is no fuel burn benefit. Furthermore, even for optimistic energy density values (750 Wh/kg) the maximum fuel burn benefit for a 500 nm mission is 5.5% and 4% for redesigned and retrofit HEPS, respectively. The power management strategies for HEPS configurations also differ based on gas turbine technology with improvement in gas turbine technology showing greater scope for electrification. The method is then extended to ATR 72 style aircraft case, showing greater fuel burn benefits across the flight mission envelope. The power management strategies also change depending on the objective function, and optimum strategies are reported for direct operating cost or fuel burn. The retrofit case studies show a benefit in direct operating cost compared to redesigned case studies for ATR 72. Finally, a novel multimission approach is shown to highlight the overall fuel burn and direct operating cost benefit across the aircraft mission cluster.


  • On the Effects of Optimal Implementation of Variable Rotor Speed and Power Management on Hybrid-Electric Rotorcraft

    by Chana Anna Saias, Ioannis Goulos, Vassilios Pachidis, Marko Bacic

    The concept of variable rotor speed (VRS) has been recognized as an efficient means to improve rotorcraft operational performance and environmental impact, with electrification being a potential technology to further contribute to that. This paper explores the impact of optimal implementation and scheduling of VRS and power management strategy for conventional and hybrid-electric rotorcraft on energy, fuel, and emissions footprint. A multidisciplinary simulation framework for rotorcraft performance combined with models for engine performance and gaseous emissions estimation is deployed. A holistic optimization approach is developed for the derivation of globally optimal schedules for combined rotor speed and power split targeting minimum energy consumption. Application of the derived optimal schedules at mission level resulted to a 6% improvement in range capability for the VRS tilt-rotor relative to its conventional counterpart. For the hybrid-electric tilt-rotor, combined optimization of VRS and power management leads to an increase in range to 18.4% at 40% and 25% reduced payload for current (250 Wh/kg) and future (450 Wh/kg) battery technology, respectively. For representative urban air mobility (UAM) scenarios, it is demonstrated that the VRS concept resulted in up to 10% and 14% reductions in fuel burn and NOx relative to the nominal rotor speed case, respectively. The utilization of the combined optimum VRS and power split schedules can boost performance with reductions of the order of 20% and 25% in mission fuel/CO2 and NOx at a reduced payload relative to the conventional tilt-rotor.


  • Design Methodology and Mission Assessment of Parallel Hybrid Electric Propulsion Systems

    by Raj Ghelani, Ioannis Roumeliotis, Chana Anna Saias, Christos Mourouzidis, Vassilios Pachidis, Justin Norman, Marko Bacic

    An integrated engine cycle design methodology and mission assessment for parallel hybrid electric propulsion architectures are presented in this paper. The aircraft case study considered is inspired by Fokker 100, boosted by an electric motor on the low-pressure shaft of the gas turbine. The fuel burn benefits arising from boosting the low-pressure shaft are discussed for two different baseline engine technologies. A three-point engine cycle design method is developed to redesign the engine cycle according to the degree of hybridization. The integrated cycle design and power management optimization method is employed to identify potential fuel burn benefits from hybridization for multiple mission ranges. Genetic algorithm-based optimizer has been used to identify optimal power management strategies. The sensitivity of these mission results has also been analyzed for different assumptions on the electric powertrain. With 1 MW motor power and a battery pack of 2300 kg, a maximum of 3% fuel burn benefit can be obtained by retrofitting the gas turbine for 400 nm mission range. Optimizing the power management strategy can improve this fuel burn benefit by 0.2–0.3%. Redesigning the gas turbine and optimizing the power management strategy, finally provides a maximum fuel benefit of 4.2% on 400 nm. The results suggest that a high hybridization by power, low hybridization by energy, and ranges below 700 nm are the only cases where the redesigned hybrid electric aircraft has benefits in fuel burn and energy consumption relative to the baseline aircraft. Finally, it is found that the percentage of fuel burn benefits from the hybrid electric configuration increases with the improvement in engine technology.


  • Design Exploration and Performance Assessment of Advanced Recuperated Hybrid-Electric Urban Air Mobility Rotorcraft

    by Chana Anna Saias, Ioannis Roumeliotis, Ioannis Goulos, Vassilios Pachidis, Marko Bacic

    The design of efficient, environmentally friendly, and quiet powerplant for rotorcraft architectures constitutes a key enabler for urban air mobility (UAM) application. This work focuses on the development and application of a generic methodology for the design, performance, and environmental impact assessment of a parallel hybrid-electric propulsion system, utilizing simple and advanced recuperated engine cycles. A simulation framework for rotorcraft analysis comprising models for rotor aerodynamics, flight dynamics, and hybrid-electric powerplant performance is deployed for the design exploration and optimization of a hybrid-electric rotorcraft, modeled after the NASA XV-15, adapted for civil applications. Optimally designed powerplants for payload-range capacity, energy efficiency, and environmental impact have been obtained. A comparative evaluation has been performed for the optimum designs. The respective tradeoffs between engine, heat exchanger weight, thermal efficiency, as well as mission fuel burn and environmental impact have been quantified. It has been demonstrated that a recuperated gas turbine-based hybrid-electric architecture may provide improvements of up to 6% in mission range capability without sacrificing useful load. At the same time, analyses performed for a representative 100 km mission suggest reductions in fuel burn and NOX emissions of up to 12.9% and 5.2%, respectively. Analyses are carried at aircraft and mission level using realistic UAM mission scenarios.


  • Preliminary Design of Hybrid-Electric Propulsion Systems for Emerging Urban Air Mobility Rotorcraft Architectures

    by Chana Anna Saias, Ioannis Goulos, Ioannis Roumeliotis, Vassilios Pachidis, Marko Bacic

    The increasing demands for air-taxi operations together with the ambitious targets for reduced environmental impact have driven significant interest in alternative rotorcraft architectures and propulsion systems. The design of hybrid-electric propulsion systems (HEPSs) for rotorcraft is seen as being able to contribute to those goals. This work aims to conduct a comprehensive design and tradeoff analysis of hybrid powerplants for rotorcraft, targeting enhanced payload-range capability and fuel economy. An integrated methodology for the design, performance assessment, and optimal implementation of HEPSs for conceptual rotorcraft has been developed. A multidisciplinary approach is devised comprising models for rotor aerodynamics, flight dynamics, HEPS performance, and weight estimation. All models are validated using experimental or flight test data. The methodology is deployed for the assessment of a hybrid-electric tilt-rotor, modeled after the NASA XV-15. This work targets to provide new insight into the preliminary design and sizing of optimally designed HEPSs for novel tilt-rotor aircraft. The paper demonstrates that at present, current battery energy densities (250 Wh/kg) severely limit the degree of hybridization if a fixed useful payload and range are to be achieved. However, it is also shown that if advancements in battery energy density to 500 Wh/kg are realized, a significant increase in the level of hybridization and hence reduction of fuel burned and carbon output relative to the conventional configuration can be attained. The methodology presented is flexible enough to be applied to alternative rotorcraft configurations and propulsion systems.