Valentina Branzi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Valentina Branzi has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Monica Meocci
University of Florence
9 shared publications - Andrea Paliotto
University of Florence
5 shared publications - Lorenzo Domenichini
Civil and Environmental Engineering Department, University of Florence, Via Santa Marta 3, 50139 Firenze, Italy
4 shared publications Lorenzo Domenichini
Civil and Environmental Engineering Department, University of Florence, Via S. Marta, 3, 50139 Firenze, Italy
2 shared publications- Alessio Martinelli
Department of Information Engineering, University of Florence, Via di S. Marta 3, 50139 Florence, Italy
1 shared publication - Andrea Sangiovanni
Prato, Italy
1 shared publication
Latest Publications
- Open Access
- 2 November 2022
- Published by MDPI AG in Future Transportation
- Vol. 2 (4) , 902-922
Human Factors in Road Design: A Review of Italian Design Standards
Human Factors are stable psychological, psychophysical, and physiological limits that influence the performance and safety of technical systems managed by humans. Roads are made for human use, but nowadays not completely on a human scale. Many studies demonstrate that Human Factors are a key factor in accident occurrence and thus it is mandatory to consider them in the definition of design standards. This research provides a methodological approach to reviewing design standards based on Human Factors. The methodology identifies which Human Factors aspects are relevant for each specific design feature. The reviewer is then able to judge if those aspects are considered using checklists. Moreover, the paper presents a review of the Italian design standards using the proposed methodology. This identifies to what extent Human Factors are considered in the Italian design standards, analyzing if they match the requirements of the three rules of Human Factors proposed by PIARC (Permanent International Association of Road Congresses). The results identify where Italian design standards consider Human Factors and where they do not. This is where further improvements should be made so that engineering solutions could match psychological requirements, for safer and ergonomic road infrastructures. The proposed approach provides a structured and systematic procedure for the analysis which has been found to be suitable also for road safety audits procedures.
- 2 November 2022
- Published by MDPI AG in Future Transportation
- Vol. 2 (4) , 902-922
Open AccessHuman Factors in Road Design: A Review of Italian Design Standards
Human Factors are stable psychological, psychophysical, and physiological limits that influence the performance and safety of technical systems managed by humans. Roads are made for human use, but nowadays not completely on a human scale. Many studies demonstrate that Human Factors are a key factor in accident occurrence and thus it is mandatory to consider them in the definition of design standards. This research provides a methodological approach to reviewing design standards based on Human Factors. The methodology identifies which Human Factors aspects are relevant for each specific design feature. The reviewer is then able to judge if those aspects are considered using checklists. Moreover, the paper presents a review of the Italian design standards using the proposed methodology. This identifies to what extent Human Factors are considered in the Italian design standards, analyzing if they match the requirements of the three rules of Human Factors proposed by PIARC (Permanent International Association of Road Congresses). The results identify where Italian design standards consider Human Factors and where they do not. This is where further improvements should be made so that engineering solutions could match psychological requirements, for safer and ergonomic road infrastructures. The proposed approach provides a structured and systematic procedure for the analysis which has been found to be suitable also for road safety audits procedures.
- 30 September 2022
- Published by Elsevier in Accident Analysis & Prevention
- Vol. 178, 106852
Transferability of the highway safety manual freeway model to EU countries
- 30 September 2022
- Published by Elsevier in Accident Analysis & Prevention
- Vol. 178, 106852
Transferability of the highway safety manual freeway model to EU countries
- Open Access
Road Surface Anomaly Assessment Using Low-Cost Accelerometers: A Machine Learning Approach
Roads are a strategic asset of a country and are of great importance for the movement of passengers and goods. Increasing traffic volume and load, together with the aging of roads, creates various types of anomalies on the road surface. This work proposes a low-cost system for real-time screening of road pavement conditions. Acceleration signals provided by on-car sensors are processed in the time–frequency domain in order to extract information about the condition of the road surface. More specifically, a short-time Fourier transform is used, and significant features, such as the coefficient of variation and the entropy computed over the energy of segments of the signal, are exploited to distinguish between well-localized pavement distresses caused by potholes and manhole covers and spread distress due to fatigue cracking and rutting. The extracted features are fed to supervised machine learning classifiers in order to distinguish the pavement distresses. System performance is assessed using real data, collected by sensors located on the car’s dashboard and floorboard and manually labeled. The experimental results show that the proposed system is effective at detecting the presence and the type of distress with high classification rates.
Open AccessRoad Surface Anomaly Assessment Using Low-Cost Accelerometers: A Machine Learning Approach
Roads are a strategic asset of a country and are of great importance for the movement of passengers and goods. Increasing traffic volume and load, together with the aging of roads, creates various types of anomalies on the road surface. This work proposes a low-cost system for real-time screening of road pavement conditions. Acceleration signals provided by on-car sensors are processed in the time–frequency domain in order to extract information about the condition of the road surface. More specifically, a short-time Fourier transform is used, and significant features, such as the coefficient of variation and the entropy computed over the energy of segments of the signal, are exploited to distinguish between well-localized pavement distresses caused by potholes and manhole covers and spread distress due to fatigue cracking and rutting. The extracted features are fed to supervised machine learning classifiers in order to distinguish the pavement distresses. System performance is assessed using real data, collected by sensors located on the car’s dashboard and floorboard and manually labeled. The experimental results show that the proposed system is effective at detecting the presence and the type of distress with high classification rates.
- 21 April 2022
- Published by Springer Nature
- p. 493-510
Application of an Innovative Network Wide Road Safety Assessment Procedure Based on Human Factors
- 21 April 2022
- Published by Springer Nature
- p. 493-510
Application of an Innovative Network Wide Road Safety Assessment Procedure Based on Human Factors
- Open Access
- 7 January 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (2) , 662
Application and Evaluation of a Non-Accident-Based Approach to Road Safety Analysis Based on Infrastructure-Related Human Factors
Too often the identification of critical road sites is made by “accident-based” methods that consider the occurred accidents’ number. Nevertheless, such a procedure may encounter some difficulties when an agency does not have reliable and complete crash data at the site level (e.g., accidents contributing factors not clear or approximate accident location) or when crashes are underreported. Furthermore, relying on accident data means waiting for them to occur with the related consequences (possible deaths and injuries). A non-accident-based approach has been proposed by PIARC. This approach involves the application of the Human Factors Evaluation Tool (HFET), which is based on the principles of Human Factors (HF). The HFET can be applied to road segments by on-site inspections and provides a numerical performance measure named Human Factors Scores (HFS). This paper analyses which relationship exists between the results of the standard accident-based methods and those obtainable with HFET, based on the analysis of self-explaining and ergonomic features of the infrastructure. The study carried out for this purpose considered 23 km of two-way two-lane roads in Italy. A good correspondence was obtained, meaning that high risky road segments identified by the HFS correspond to road segments already burdened by a high number of accidents. The results demonstrated that the HFET allows for identifying of road segments requiring safety improvements even if accident data are unavailable. It allows for improving a proactive NSS, avoiding waiting for accidents to occur.
- 7 January 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (2) , 662
Open AccessApplication and Evaluation of a Non-Accident-Based Approach to Road Safety Analysis Based on Infrastructure-Related Human Factors
Too often the identification of critical road sites is made by “accident-based” methods that consider the occurred accidents’ number. Nevertheless, such a procedure may encounter some difficulties when an agency does not have reliable and complete crash data at the site level (e.g., accidents contributing factors not clear or approximate accident location) or when crashes are underreported. Furthermore, relying on accident data means waiting for them to occur with the related consequences (possible deaths and injuries). A non-accident-based approach has been proposed by PIARC. This approach involves the application of the Human Factors Evaluation Tool (HFET), which is based on the principles of Human Factors (HF). The HFET can be applied to road segments by on-site inspections and provides a numerical performance measure named Human Factors Scores (HFS). This paper analyses which relationship exists between the results of the standard accident-based methods and those obtainable with HFET, based on the analysis of self-explaining and ergonomic features of the infrastructure. The study carried out for this purpose considered 23 km of two-way two-lane roads in Italy. A good correspondence was obtained, meaning that high risky road segments identified by the HFS correspond to road segments already burdened by a high number of accidents. The results demonstrated that the HFET allows for identifying of road segments requiring safety improvements even if accident data are unavailable. It allows for improving a proactive NSS, avoiding waiting for accidents to occur.
- Open Access
- 1 December 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (23) , 11364
A Predictive Pedestrian Crash Model Based on Artificial Intelligence Techniques
Every year in Italy, there are about 20,000 road accidents involving pedestrians, with a significant number of injuries and deaths. Out of these, about 30% occur at pedestrian crossings, where pedestrians should be protected the most. Here, we propose a new accident prediction model to improve pedestrian safety assessments that allows us to accurately identify the sites with the largest potential safety improvements and define the best treatments to be applied. The accident prediction model was developed using the ISTAT dataset, including information about the fatal and injurious crashes that occurred in Italy in a 5-year period. The model allowed us to estimate the risk level of a road section through a machine-learning approach. Gradient Boosting seems to be an appropriate tool to fit classification models for its flexibility that allows us to capture non-linear relationships that would be difficult to detect via a classical approach. The results show the ability of the model to perform an accurate analysis of the sites included in the dataset. The locations analyzed have been classified based on the potential risk in the following three classes: High, medium, and low. The proposed model represents a solid and reliable tool for practitioners to perform accident analysis with pedestrian involvement.
- 1 December 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (23) , 11364
Open AccessA Predictive Pedestrian Crash Model Based on Artificial Intelligence Techniques
Every year in Italy, there are about 20,000 road accidents involving pedestrians, with a significant number of injuries and deaths. Out of these, about 30% occur at pedestrian crossings, where pedestrians should be protected the most. Here, we propose a new accident prediction model to improve pedestrian safety assessments that allows us to accurately identify the sites with the largest potential safety improvements and define the best treatments to be applied. The accident prediction model was developed using the ISTAT dataset, including information about the fatal and injurious crashes that occurred in Italy in a 5-year period. The model allowed us to estimate the risk level of a road section through a machine-learning approach. Gradient Boosting seems to be an appropriate tool to fit classification models for its flexibility that allows us to capture non-linear relationships that would be difficult to detect via a classical approach. The results show the ability of the model to perform an accurate analysis of the sites included in the dataset. The locations analyzed have been classified based on the potential risk in the following three classes: High, medium, and low. The proposed model represents a solid and reliable tool for practitioners to perform accident analysis with pedestrian involvement.
- Open Access
- 20 August 2021
- Published by Wiley in Journal of Advanced Transportation
- Vol. 2021, 1-18
A Combined Simulation Approach to Evaluate Overtaking Behaviour on Two-Lane Two-Way Rural Roads
A significant percentage of road fatalities and injuries occur in the nonmotorway rural road network. One of the main causes of accidents on these roads is represented by overtaking, as, by its nature, it involves a risk of a head-on collision with oncoming traffic. The paper describes a combined simulation approach (driving simulator and traffic microsimulation) designed to examine the influence of different traffic conditions on passing manoeuvres on two-lane two-way rural roads. The main focus was the evaluation of the end of the passing manoeuvre because it reflects the risk of a head-on collision. In addition, the study aimed to assess the usefulness of the proposed combined approach in the ability to proactively and quickly diagnose traffic safety problems and consequently to evaluate appropriate solutions. The data collected with an interactive driving simulator on a sample of 54 participants have been used to adjust some input data of the traffic microsimulation software. A specific situation consisting of a stationary heavy vehicle obstructing the entire lane was repeated in both experiments. The analyses focused on time-to-collision (TTC), defined as the remaining gap between the passing vehicle and the oncoming vehicle at the end of the passing manoeuvre. The results showed that the type of manoeuvre performed is significantly influenced by the traffic condition. Furthermore, the manoeuvre is influenced by the gap between two successive vehicles in the opposite lanes. Focusing on the end of the manoeuvre, it was found how a traffic increase leads to a significant reduction of the TTC values. Furthermore, the comparative analysis conducted between the data recorded following the combined approach and those obtained using exclusively the input data of the microsimulation software supports the usefulness of the proposed methodology for conducting road safety analyses, especially in complex traffic environments where drivers’ behaviour plays a decisive role.
- 20 August 2021
- Published by Wiley in Journal of Advanced Transportation
- Vol. 2021, 1-18
Open AccessA Combined Simulation Approach to Evaluate Overtaking Behaviour on Two-Lane Two-Way Rural Roads
A significant percentage of road fatalities and injuries occur in the nonmotorway rural road network. One of the main causes of accidents on these roads is represented by overtaking, as, by its nature, it involves a risk of a head-on collision with oncoming traffic. The paper describes a combined simulation approach (driving simulator and traffic microsimulation) designed to examine the influence of different traffic conditions on passing manoeuvres on two-lane two-way rural roads. The main focus was the evaluation of the end of the passing manoeuvre because it reflects the risk of a head-on collision. In addition, the study aimed to assess the usefulness of the proposed combined approach in the ability to proactively and quickly diagnose traffic safety problems and consequently to evaluate appropriate solutions. The data collected with an interactive driving simulator on a sample of 54 participants have been used to adjust some input data of the traffic microsimulation software. A specific situation consisting of a stationary heavy vehicle obstructing the entire lane was repeated in both experiments. The analyses focused on time-to-collision (TTC), defined as the remaining gap between the passing vehicle and the oncoming vehicle at the end of the passing manoeuvre. The results showed that the type of manoeuvre performed is significantly influenced by the traffic condition. Furthermore, the manoeuvre is influenced by the gap between two successive vehicles in the opposite lanes. Focusing on the end of the manoeuvre, it was found how a traffic increase leads to a significant reduction of the TTC values. Furthermore, the comparative analysis conducted between the data recorded following the combined approach and those obtained using exclusively the input data of the microsimulation software supports the usefulness of the proposed methodology for conducting road safety analyses, especially in complex traffic environments where drivers’ behaviour plays a decisive role.
- Open Access
- 13 January 2021
- Published by Springer Nature in Journal of Civil Structural Health Monitoring
- Vol. 11 (2) , 485-506
An innovative approach for high-performance road pavement monitoring using black box
One of the criteria adopted by the Word Bank with the aim of defining the economic level of a country is represented by the condition of the road pavements. To ensure adequate road pavement quality, road authorities should be continuously monitoring and repair the detected anomalies. To fast solve problems associated with poor quality of road surface such as comfort or safety, the presence of distress must be detected quickly. The high-performance pavement distress detection, such as those base on the image processing or on the laser scanning, is very expensive and does not allow to the road administration to conduct the appropriate monitoring campaigns. To solve these problems, the paper describes the pave box methodology, an innovative and immediately operational distress detection approach based on the exploitation of data collected by the black boxes located inside the vehicles that routinely pass on the road network. Data processing and the algorithms used in the post-processing evaluation of the vertical acceleration were compared with existing visual surveys procedures such as PCI. Two different indices have been proposed to detect and classify both the local damages and the global condition of the entire road. Pave box provides a robust evaluation of the pavement condition that allows to detect all the severe distress and not less than 70% of the minor damages on the pavement surface. The proposal is characterized by low time and cost consumption and it represents an effective tool for road authorities.
- 13 January 2021
- Published by Springer Nature in Journal of Civil Structural Health Monitoring
- Vol. 11 (2) , 485-506
Open AccessAn innovative approach for high-performance road pavement monitoring using black box
One of the criteria adopted by the Word Bank with the aim of defining the economic level of a country is represented by the condition of the road pavements. To ensure adequate road pavement quality, road authorities should be continuously monitoring and repair the detected anomalies. To fast solve problems associated with poor quality of road surface such as comfort or safety, the presence of distress must be detected quickly. The high-performance pavement distress detection, such as those base on the image processing or on the laser scanning, is very expensive and does not allow to the road administration to conduct the appropriate monitoring campaigns. To solve these problems, the paper describes the pave box methodology, an innovative and immediately operational distress detection approach based on the exploitation of data collected by the black boxes located inside the vehicles that routinely pass on the road network. Data processing and the algorithms used in the post-processing evaluation of the vertical acceleration were compared with existing visual surveys procedures such as PCI. Two different indices have been proposed to detect and classify both the local damages and the global condition of the entire road. Pave box provides a robust evaluation of the pavement condition that allows to detect all the severe distress and not less than 70% of the minor damages on the pavement surface. The proposal is characterized by low time and cost consumption and it represents an effective tool for road authorities.
- 1 March 2019
- Published by Elsevier in Accident Analysis & Prevention
- Vol. 124, 1-11
Development of an accident prediction model for Italian freeways
- 1 March 2019
- Published by Elsevier in Accident Analysis & Prevention
- Vol. 124, 1-11
Development of an accident prediction model for Italian freeways
- 1 February 2019
- Published by Elsevier in Accident Analysis & Prevention
- Vol. 123, 243-255
Influence of drivers’ psychological risk profiles on the effectiveness of traffic calming measures
- 1 February 2019
- Published by Elsevier in Accident Analysis & Prevention
- Vol. 123, 243-255
Influence of drivers’ psychological risk profiles on the effectiveness of traffic calming measures