Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Sunil Benachigere Shivarudraiah has a total of 81 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Electroluminescent photoresists extending lithographic scaling to OLEDs

    by Shao-Wei Lo, Sunil B. Shivarudraiah, Zhan-Hong Lin, Patrick Helbling, Lifei Song, Jiachen Wang, Miguel Nouman, Fuze Jiang, Gerrit Stemmler, Donato Maria Carretta, et al.

    The miniaturization of organic light-emitting diodes is critical for next-generation ultrahigh-resolution displays and integrated photonics 1–8 . However, traditional vacuum evaporation and inkjet printing methods are incompatible with the lithographic scaling processes that underpin silicon electronics 9–16 , hindering true monolithic integration with complementary metal–oxide–semiconductor circuits. Here we present electroluminescent photoresists synthesized via atom transfer radical polymerization that can be directly patterned by ultraviolet and electron-beam lithography. These multi-arm star polymers feature a core–shell architecture designed to embed the thermally activated delayed fluorescence emitters within a protective host shell, segregating them from the reactive photocrosslinking moieties on the surface. The site-specific isolation ensures that crosslinking reactions occur at the periphery, leaving the emissive cores intact and preserving high electroluminescence. We demonstrate robust processing orthogonality in sequential multilayer electroluminescent photoresist photolithography, enabling subdiffraction fluorescence nanopatterns with critical dimensions down to 110 nm. We validate their device performance with multicolour, ultraviolet-patterned organic light-emitting diodes exhibiting external quantum efficiencies exceeding 13%. These results not only pave the way for extending Moore’s law to organic optoelectronics but also unlock their potential for monolithic optoelectronic integration.


  • Open Access

    Scalable nanopatterning of organic light-emitting diodes beyond the diffraction limit

    by Tommaso Marcato, Jiwoo Oh, Zhan-Hong Lin, Tian Tian, Abhijit Gogoi, Sunil B. Shivarudraiah, Sudhir Kumar, Ananth Govind Rajan, Shuangshuang Zeng, Chih-Jen Shih

    Miniaturization of light-emitting diodes below the diffraction limit of the emission wavelength can enable super-resolution imaging and on-chip light sources for ultrabroadband chiplet communication. Organic light-emitting diodes, although suitable for miniaturization due to their emission from localized excitons, suffer from the limited compatibility of organic materials with traditional photolithographic patterning. Here we develop a method for the scalable fabrication of nanoscale organic light-emitting diodes with pixel densities up to 100,000 pixels per inch, periodicity of 250 nm and the smallest pixel size in the order of 100 nm. We realize the direct nanoscale patterning of organic semiconductors by self-aligned nanostencil etching and lithography. The process is resist-free and involves etching and evaporation through nanoapertures in a free-standing film adhering to the substrate. A nanoscale organic light-emitting diode surface with over 1 megapixel exhibits an average external quantum efficiency of 13.1%. We also demonstrate electroluminescent metasurfaces with subwavelength-scale meta-atoms that can electrically modulate the emitted light. The diffractive coupling between nanopixels enables control over the far-field emission properties of light, including directionality and polarization. These results pave the way for hybrid integrated photonics technologies, including visible-light communication, lasing and high-resolution displays.


  • Open Access

    Understanding Optical Properties and Electronic Structures of High‐Entropy Alloyed Perovskite Nanocrystals

    by Yung‐Tai Chiang, Sunil B. Shivarudraiah, Alexander Wieczorek, Khoong Hong Khoo, Zhidong Leong, Jia Wei Melvin Lim, Zengshan Xing, Sudhir Kumar, Simon F. Solari, Yen‐Ting Li, et al.

    High‐entropy alloying (HEA) has emerged as a prominent strategy to modulate physiochemical properties of nanomaterials. Nevertheless, this approach is underexplored in luminescent semiconductor nanocrystals (NCs) due to the lack of understanding into the HEA‐induced electronic effect and photophysical behaviors. Herein, harnessing the defect tolerance of metal halide perovskite NCs, we systematically synthesized and characterized high‐entropy halide perovskite (HEP) NCs containing multiple B‐site elements (Pb 2+ , Sr 2 ⁺, Ca 2 ⁺, Cd 2 ⁺, and Mg 2 ⁺). High‐resolution transmission electron microscopy, transient photoluminescence and absorption spectroscopy, X‐ray photoemission spectroscopy, and density functional theory simulations are employed to unravel the evolution of electronic structures with respect to the alloying degree and link them to the spectral signatures and photostability. Counterintuitively, although the HEP NCs exhibit lateral sizes smaller than the Bohr diameter of CsPbBr 3 NCs (∼7 nm), HEA reduces the band dispersion and broadens the conduction band, thereby vanishing the excitonic feature by forming near band‐edge shallow states. We show that these HEA‐induced shallow states foster rapid radiative recombination and improve photostability, accompanied by a significantly reduced lead content by up to 70%. These findings pioneer the understanding of the correlation between HEA‐induced electronic effect and photophysical properties, highlighting the versatility of HEA for band structure engineering and stabilization of metal halide perovskites NCs.


  • Open Access

    Understanding Optical Properties and Electronic Structures of High‐Entropy Alloyed Perovskite Nanocrystals

    by Yung‐Tai Chiang, Sunil B. Shivarudraiah, Alexander Wieczorek, Khoong Hong Khoo, Zhidong Leong, Jia Wei Melvin Lim, Zengshan Xing, Sudhir Kumar, Simon F. Solari, Yen‐Ting Li, et al.

    High‐entropy alloying (HEA) has emerged as a prominent strategy to modulate physiochemical properties of nanomaterials. Nevertheless, this approach is underexplored in luminescent semiconductor nanocrystals (NCs) due to the lack of understanding into the HEA‐induced electronic effect and photophysical behaviors. Herein, harnessing the defect tolerance of metal halide perovskite NCs, we systematically synthesized and characterized high‐entropy halide perovskite (HEP) NCs containing multiple B‐site elements (Pb 2+ , Sr 2 ⁺, Ca 2 ⁺, Cd 2 ⁺, and Mg 2 ⁺). High‐resolution transmission electron microscopy, transient photoluminescence and absorption spectroscopy, X‐ray photoemission spectroscopy, and density functional theory simulations are employed to unravel the evolution of electronic structures with respect to the alloying degree and link them to the spectral signatures and photostability. Counterintuitively, although the HEP NCs exhibit lateral sizes smaller than the Bohr diameter of CsPbBr 3 NCs (∼7 nm), HEA reduces the band dispersion and broadens the conduction band, thereby vanishing the excitonic feature by forming near band‐edge shallow states. We show that these HEA‐induced shallow states foster rapid radiative recombination and improve photostability, accompanied by a significantly reduced lead content by up to 70%. These findings pioneer the understanding of the correlation between HEA‐induced electronic effect and photophysical properties, highlighting the versatility of HEA for band structure engineering and stabilization of metal halide perovskites NCs.


  • Efficient Blade-Coated Wide-Bandgap Perovskite Solar Cells via Interface Engineering

    by Johnpaul K. Pious, Pascal N. Rohrbeck, Roland Widmer, Aaron H. Oechsle, Sunil B. Shivarudraiah, Radha K. Kothandaraman, Severin Siegrist, Chih-Jen Shih, Thomas A. Jung, Stefan A. L. Weber, et al.

    Most high-efficiency all-perovskite tandem solar cells use a "superstrate" configuration, integrating a wide-bandgap (WBG) top subcell and a narrow bandgap (NBG) bottom subcell. However, this structure suffers oxidative degradation due to easily air-exposable bottom NBG subcells. A "substrate" structure offers improved stability for tandems by encapsulating the NBG top subcell with the air-stable WBG bottom subcell. However, conventional WBG perovskite solar cells (PSCs) using water-based NiOx interlayers hinder their fabrication on top of the NBG subcells in an inert atmosphere. To overcome this, we developed a nonaqueous NiOx nanoparticle dispersion, enabling interlayer fabrication inside a glove box. The blade-coated NiOx interlayer facilitated the formation of a densely packed 2PACz (2-(9H-carbazol-9-yl)ethyl]phosphonic acid) monolayer hole transporting layer (HTL). The energetically aligned 2PACz molecules reduced minority carrier recombination at the NiOx/perovskite interface. As a result, the fully scalable 1.77 eV WBG PSCs employing a NiOx/2PACz hybrid HTL delivered a champion power conversion efficiency of 17.4%.


  • Open Access

    Stabilization of Quantum‐Confined Anisotropic CsPbI3 Nanoplatelets by Solid‐Phase Metal Iodide Crude Reaction for Color‐Pure Red Emission

    by Simon F. Solari, Alexander Wieczorek, Tommaso Marcato, Michael Wörle, Frank Krumeich, Yen‐Ting Li, Yu‐Cheng Chiu, Sebastian Siol, Sunil B. Shivarudraiah, Chih‐Jen Shih

    Quantum‐confined CsPbI3 perovskite nanoplatelets (NPLs) are highly desirable for optoelectronic applications owing to their anisotropic electronic properties that substantially boost the light outcoupling efficiency in light‐emitting diodes (LEDs). However, the structural instability of the emissive CsPbI3 phases makes it degrade rapidly to the non‐emissive δ‐phase under ambient conditions. Here, the study presents a synthetic approach to produce spectrally stable CsPbI3 nanoplatelets (NPLs) through solid‐phase crude reactions with metal iodide powders, MI2 (M2+ = Mn2+ or Zn2+). The synthesized NPLs exhibit narrow and color‐pure red emission with high photoluminescence (PL) quantum yields (QYs, ηPL) of up to 85%. Systematic investigations into the surface chemistry of NPLs reveal that metal iodide treatment stabilizes anisotropic CsPbI3 NPLs via surface passivation with metal and halide ions, substantially hindering from the formation of non‐emissive yellow phase. The anisotropic NPLs display signatures of spontaneous self‐assembly in spin‐casted films, which yield strong emission anisotropy, with up to 82% of the transition dipoles being horizontally oriented with respect to the substrate, as revealed by the back focal plane (BFP) imaging. The results presented here shed light on solid‐phase approaches for the preparation of quantum‐confined nanocrystals (NCs) with desirable geometry, which boost the light outcoupling efficiency in LEDs.


  • Open Access

    Indoor Self‐Powered Perovskite Optoelectronics with Ultraflexible Monochromatic Light Source

    by Hiroaki Jinno, Sunil B. Shivarudraiah, Rasmussen Asbjörn, Gianluca Vagli, Tommaso Marcato, Felix Thomas Eickemeyer, Lukas Pfeifer, Tomoyuki Yokota, Takao Someya, Chih‐Jen Shih

    Self‐powered skin optoelectronics fabricated on ultrathin polymer films is emerging as one of the most promising components for the next‐generation Internet of Things (IoT) technology. However, a longstanding challenge is the device underperformance owing to the low process temperature of polymer substrates. In addition, broadband electroluminescence (EL) based on organic or polymer semiconductors inevitably suffers from periodic spectral distortion due to Fabry–Pérot (FP) interference upon substrate bending, preventing advanced applications. Here, ultraflexible skin optoelectronics integrating high‐performance solar cells and monochromatic light‐emitting diodes using solution‐processed perovskite semiconductors is presented. n–i–p perovskite solar cells and perovskite nanocrystal light‐emitting diodes (PNC‐LEDs), with power‐conversion and current efficiencies of 18.2% and 15.2 cd A−1, respectively, are demonstrated on ultrathin polymer substrates with high thermal stability, which is a record‐high efficiency for ultraflexible perovskite solar cell. The narrowband EL with a full width at half‐maximum of 23 nm successfully eliminates FP interference, yielding bending‐insensitive spectra even under 50% of mechanical compression. Photo‐plethysmography using the skin optoelectronic device demonstrates a signal selectivity of 98.2% at 87 bpm pulse. The results presented here pave the way to inexpensive and high‐performance ultrathin optoelectronics for self‐powered applications such as wearable displays and indoor IoT sensors.


  • In Situ MAPbI3 Perovskite Nanostructures Formed by a Poly[(phenylglycidyl ether)-co-formaldehyde] Epoxide for Enhanced Stability and Photoluminescence

    by Sunil B. Shivarudraiah, Christopher C. S. Chan, Dezhang Chen, Zhicong Zhou, Michael Ng, Neha Tewari, Chun Ki Tao, Kam Sing Wong, Jonathan E. Halpert


  • Open Access

    Carrier Dynamics of Efficient Triplet Harvesting in AgBiS2/Pentacene Singlet Fission Solar Cells

    by Pai Geng, Dezhang Chen, Sunil B. Shivarudraiah, Xihan Chen, Liang Guo, Jonathan E. Halpert

    Singlet fission is a process by which an organic semiconductor is able to generate two triplet excitons from a single photon. If charges from the triplets can be successfully harvested without heavy losses in energy, then this process can enable a single‐junction solar cell to surpass the Shockley–Queisser limit. While singlet fission processes are commonly observed in several materials, harvesting the resulting triplets is difficult and has been demonstrated with only a few transport materials. Here, transient absorption spectroscopy is used to investigate singlet fission and carrier transfer processes at the AgBiS2/pentacene (AgBiS2/Pc) heterojunction. The successful transfer of triplets from pentacene to AgBiS2 and the transfer of holes from AgBiS2 to pentacene is observed. Further singlet fission in pentacene by modifying the crystallinity of the pentacene layer and have fabricated the first singlet fission AgBiS2/Pc solar cell is enhanced. Singlet fission devices exhibit higher external quantum efficiency compared with the control devices, and thus demonstrating the significant contribution of charges from the singlet fission process.


  • The Multiple Roles of Metal Ion Dopants in Spectrally Stable, Efficient Quasi‐2D Perovskite Sky‐Blue Light‐Emitting Devices

    by Cham Heng Angus Li, Pai Geng, Sunil Benachigere Shivarudraiah, Michael Ng, Xian‐Fu Zhang, Baomin Xu, Liang Guo, Jonathan E. Halpert

    Perovskite light‐emitting devices (peLEDs) have recently gained widespread attention as candidates for next‐generation display technologies. Red and green peLEDs have achieved over 20% external quantum efficiency (EQE), however blue peLEDs still lag behind. One proposed solution for improving the performance of blue peLEDs has been doping the perovskite films with metal ions, ostensibly to passivate surface trap sites and improve the EQE. Despite a few recent reports, however, the many roles of the metal ion dopants have not yet been fully explored. Here improvements in the EQE and spectral stability of quasi‐2D perovskites, often called 2D/3D or layered perovskites are reported. CsPbBr3−xClx sky‐blue emitting peLEDs, with a maximum EQE of 7.5%, and color stable spectra at high applied voltages are achieved, via doping with divalent metal ions at concentrations of 0.5 to 10%, by mole ratio. After screening several candidates, two metal ions are identified, Mn2+ and Mg2+ that are particularly effective, as compared with PEA‐based quasi‐2D control devices. Then these examples are used to study the effect of metal ions more generally on the film morphology, the hole transport layer's conductivity, the trap density, and the energy funneling dynamics, all of which strongly influence the device performance.