DODaniel Marian Ogris

Daniel Marian Ogris

*This is an algorithmically generated author record based on publicly available information.

Daniel Marian Ogris has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Atomic‐Scale Insights Into Tramp Element Segregation and Mechanical Performance of a Low‐Carbon Steel

    by Lukas Hatzenbichler, Maximilian Graf, Phillip Haslberger, Daniel Marian Ogris, Matthew Galler, Oleksandr Glushko, Ronald Schnitzer

    The increasing reliance on scrap in steelmaking in order to reduce CO 2 emissions leads to elevated concentrations of tramp elements, which can significantly influence microstructural evolution and material performance. The effect of higher tramp element levels on segregation of specific elements to grain boundaries, accumulation at ferrite–cementite interfaces within a pearlitic microstructure, and formation of nanoscale precipitates is systematically investigated using atom probe tomography combined with correlative transmission electron microscopy. Detected trends in the distribution of tramp elements are correlated with the changes in mechanical properties measured by hardness and notch impact tests. Pronounced segregation of Cu, Mo, and P was observed at random high‐angle grain boundaries, while Cr, Cu, Mo, and P were additionally enriched at ferrite–cementite interfaces. Moreover, co‐precipitation of Cu, Sn, Ni, and Al at ferrite–cementite interfaces reveals complex interactions between elements. An unexpected improvement in toughness is attributed to enhanced GB cohesion due to Mo segregation and grain refinement. These findings advance the understanding of nanoscale tramp element behavior in recycled steels and provide guidance for alloy design and processing strategies to control scrap‐derived impurities, thereby promoting more sustainable and circular steel production.

  • Open Access

    Surface-Stress-Induced Lattice Distortion in Nanolamellar Cementite

    by Marek Gocnik, Maximilian Graf, Peter Kunnas, Anna Sophie Jelinek, Daniel Marian Ogris, Ronald Schnitzer, Jozef Keckes

    Cementite morphology is known to govern the mechanical performance of steels, yet its influence on actual crystal structure, like unit cell parameters, is not well quantified. Here, we show that cementite morphology-dependent surface stresses generate measurable lattice distortion in nanocrystalline cementite. Lamellar and spheroidized cementite powders were extracted from a Cr-alloyed hypereutectoid steel and characterized by high-energy synchrotron X-ray diffraction combined with double-Voigt profile modeling. Despite a higher Cr content in spheroidized cementite, lamellar cementite exhibits systematically larger lattice parameters, corresponding to an average volumetric lattice strain of 6.3 ± 2.2 × 10−4. This counter-intuitive expansion is rationalized by a continuum mechanics framework that incorporates the orthorhombic elastic anisotropy of cementite and particle morphology. The model predicts the sign and magnitude of morphology-induced lattice strain, demonstrating that surface-stress effects constitute a systematic bias in diffraction-derived lattice parameters of nanostructured carbides.

  • Open Access

    Cyclic Solid-Liquid Phase Transformations in the $\text {CaO}$–$\text {SiO}_2$ System—Experiments and Modelling

    by Daniel Marian Ogris, Volkmar Kircher, Ernst Gamsjäger

    The cyclic growth and shrinkage of solid oxides (i.e. wollastonite) in $$\text {CaO}$$ CaO – $$\text {SiO}_2$$ SiO 2 -based slags is investigated in-situ by means of High-Temperature Confocal Scanning Laser Microscopy (HT-CSLM). The compositions of the slags are carefully selected to induce different phase transformation conditions, i.e. congruent and incongruent melting/solidification. To complement the experimental results, the kinetics of growth and shrinkage of oxide crystals is investigated by means of a sharp interface model where the interfacial reaction and diffusion in the liquid bulk are considered as possible rate-controlling processes. The modelling approach combined with data analysis from key experiments reveals the underlying dissipative processes of solidification and melting phenomena, here, diffusion in the liquid bulk material and/or the interfacial reactions. The modelling approach is likely to be applicable for future materials design and processing problems from this perspective.


  • Open Access

    Numerical Treatment of Oxide Particle Dissolution in Multicomponent Slags with Local Gibbs Energy Minimization

    by Daniel Marian Ogris, Ernst Gamsjäger

    Herein, a diffusion model for the dissolution of oxide particles in multicomponent slag systems is developed. It is assumed in this model that a sharp‐interface separates the solid particle from the liquid slag. Minimization of the Gibbs energy provides the conditions at the interface. The differential equations for multicomponent diffusion in the liquid slag are solved numerically via a finite‐difference scheme. It is indicated via parameter studies that the diffusion controlled dissolution kinetics may result in strongly different dissolution profiles depending on the initial conditions. It is demonstrated that the rate‐controlling dissipative process is the diffusion of components for cases where earlier investigations claimed that a coupled diffusion‐reaction process is in charge of the dissolution kinetics. Eventually, the numerical results are compared to data obtained from high‐temperature laser scanning confocal microscopy (HT‐LSCM) experiments.