LZLixin Zhang

Lixin Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Lixin Zhang has a total of 54 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Wind-Induced Response Analysis and In Situ Non-Destructive Reinforcement of Existing Ground-Mounted Photovoltaic Supports

    by Hongkun Chen, Xue Hu, Qiang Xiu, Lixin Zhang, Min Lin

    With the rapid expansion of ground-mounted photovoltaic power stations, the wind-induced response and reinforcement of existing photovoltaic support structures have become increasingly important. This study investigates an existing ground-mounted photovoltaic support in Yuli County, Xinjiang, China. A fluctuating wind model based on the Davenport spectrum was established, and a one-way fluid–structure interaction method was used to analyze wind pressure distribution, displacement response, and weak components under different wind direction angles. The results indicate that the 0° wind direction is the most unfavorable condition, and that the purlins and their connection regions are the dominant weak components under fluctuating wind loads. To address the reinforcement needs of existing in-service photovoltaic power stations, a low-disturbance in situ reinforcement method was proposed by inserting internal auxiliary members into the original purlins, which can be implemented without dismantling photovoltaic modules, purlins, or existing support components. Parameter analysis showed that a 2.5 mm-thick internal reinforcement member provided an effective balance between stiffness improvement and material use. Array-scale verification demonstrated that the maximum displacement of the first-row support decreased from 5.9738 mm to 3.9377 mm after reinforcement, corresponding to a reduction of approximately 34.1%. The proposed method provides a practical, low-disturbance reinforcement strategy for existing photovoltaic support structures.

  • Open Access

    Application of a bi-directional gated recurrent unit combined with a recurrent neural network model based on fusion attention mechanism in estimating soil salinity

    by Jiawei Zhao, Huan Wang, Lixin Zhang, Xiao Ma

    Soil salinization is an important limiting factor for agricultural and environmental sustainable development. To achieve rapid and accurate identification of soil salt content, a classification model called attention-bidirectional gate recurrent unit recurrent neural network (Att-BiGRU-RNN) is designed, incorporating the fusion of an attention mechanism. In the encoding and decoding modules of the model, BiGRU and RNN structures are used, enabling the extraction of deep spectral features by leveraging the correlation between spectral information in different bands of hyperspectral data. The attention mechanism is introduced to dynamically allocate weight information based on the differences in spectral information, thereby increasing the contribution of important spectral features to the classification model and improving the accuracy of the model. The research area is initially set in Dinge County, Shaanxi Province, China. Field spectroscopy measurements of 120 samples of original and air-dried soils are conducted using a ground-based spectrometer. Different mixed models for estimating soil salt content, including FDT-SVR, FDT-CNN, BiGRU-RNN, and Att-BiGRU-RNN, are compared. The results show that compared to other models, the Att-BiGRU-RNN model optimized by the attention mechanism exhibits the highest prediction accuracy, with a coefficient of determination R2 = 0.932 and a root mean square error RMSE = 0.012. Additionally, the model’s recall curve at different precision levels is obtained to meet the parameter selection requirements under different estimation demands. This method can effectively identify areas with high soil salt content or severe salinization based on portable hyperspectral sensors and unmanned aerial vehicle platforms and statistically analyze the distribution of soil salt content.

  • Open Access

    Observer-Based Remote Conductivity Variable-Parameter Sliding Mode Control for Water–Fertilizer Integration Machines Using Recursive Least Squares Adaptive Estimation

    by Peng Zhang, Zhigang Li, Xue Hu, Lixin Zhang

    In remote conductivity control for water–fertilizer integration systems, challenges such as long-distance nonlinearities and variable parameters can lead to fertilization inaccuracies, including over-irrigation and uneven distribution, affecting both productivity and environmental sustainability. To mitigate these issues, this study proposes a variable-parameter sliding mode control (VSMC) strategy, combined with an adaptive observer based on Recursive Least Squares (RLS) to estimate system inertia and load torque in real time. This allows for dynamic adjustment of the sliding surface parameters, ensuring robust control even under varying operating conditions. Two parameter derivation approaches—analytical modeling and data-driven fitting—are evaluated. Field tests demonstrate that VSMC outperforms the Proportional–Integral (PI) and conventional sliding mode control (SMC) methods in maintaining target electrical conductivity (EC) levels. Specifically, for a target EC of 1.4 mS/cm, VSMC stabilizes the system to within 1.18–1.60 mS/cm in 95 s, with a 14.3% overshoot, well within agronomic tolerance. In regional irrigation trials, VSMC significantly improves fertilizer uniformity, reducing the standard deviation of potassium nitrate distribution from 2.14 (PI) to 0.59. The simulation and experimental results validate the effectiveness and robustness of the proposed method, highlighting its potential to enhance agronomic efficiency and reduce environmental impact.


  • Open Access

    An improved parallel genetic algorithm for job shop scheduling problem

    by Qifu Du, Shijiao Li, Ming Zhai, Wei Peng, Mingfei He, Lixin Zhang, Juin J. Liou, Yifan Hu, Yangjie Cao, Mingfu Zhu, et al.

  • Open Access

    Application of Disturbance Observer-Based Fast Terminal Sliding Mode Control for Asynchronous Motors in Remote Electrical Conductivity Control of Fertigation Systems

    by Huan Wang, Jiawei Zhao, Lixin Zhang, Siyao Yu

    In addressing the control of asynchronous motors in the remote conductivity of fertigation machines, this study proposes a joint control strategy based on the Fast Terminal Sliding Mode Control-Disturbance Observer (FTSMC-DO) system for asynchronous motors. The goal is to enhance the dynamic performance and disturbance resistance of asynchronous motors, particularly under low-speed operating conditions. The approach involves refining the two-degree-of-freedom internal model controller using fractional-order functions to explicitly separate the controller’s robustness and tracking capabilities. To mitigate the motor’s sensitivity to external disturbances during variable speed operations, a load disturbance observer is introduced, employing hyperbolic tangent and Fal functions for real-time monitoring and compensation, seamlessly integrated into the sliding mode controller. To address issues related to low-speed chattering typically associated with sliding mode controllers, this study introduces a revised non-singular fast terminal sliding mode surface. Additionally, guided by fuzzy control principles, the study enables real-time selection of sliding mode approaching law parameters. Experimental results from the asynchronous motor control platform demonstrate that FTSMC-DO control significantly reduces adjustment time and speed fluctuations during operation, minimizing the impact of load disturbances on the system. The system exhibits robust disturbance rejection, improved robustness, and enhanced control capability. Furthermore, field tests validate the effectiveness of the FTSMC-DO system in regulating remote electrical conductivity (EC) levels. The control time is observed to be less than 120 s, overshoot less than 16.1%, and EC regulation within 0.2 mS·cm−1 over a pipeline distance of 120 m. The FTSMC-DO control consistently achieves the desired EC levels with minimal fluctuation and overshoot, outperforming traditional PID and SMC methods. This high level of precision is crucial for ensuring optimal nutrient delivery and efficient water usage in agricultural irrigation systems, highlighting the system’s potential as a valuable tool in modern, sustainable farming practices.


  • Open Access

    Application of a Bi-Directional Gated Recurrent Unit Combined with a Recurrent Neural Network Model Based on Fusion Attention Mechanism in Estimating Soil Salinity

    by Jiawei Zhao, Huan Wang, Lixin Zhang

    Soil salinization is an important limiting factor for agricultural and environmental sustainable development. To achieve rapid and accurate identification of soil salt content, a classification model called Attention-bidirectional gate recurrent unit recurrent neural network (Att-BiGRU-RNN) is designed, incorporating the fusion of attention mechanism. In the encoding and decoding modules of the model, BiGRU and RNN structures are used, enabling the extraction of deep spectral features by leveraging the correlation between spectral information in different bands of hyperspectral data. The attention mechanism is introduced to dynamically allocate weight information based on the differences in spectral information, thereby increasing the contribution of important spectral features to the classification model and improving the accuracy of the model. The research area is initially set in Dinge County, Shaanxi Province, China. Field spectroscopy measurements of 120 samples of original and air-dried soils are conducted using a ground-based spectrometer. Different mixed models for estimating soil salt content, including FDT-SVR, FDT-CNN, BiGRU-RNN, and Att-BiGRU-RNN, are constructed and validated and compared. The results show that compared to other models, the Att-BiGRU-RNN model optimized by the attention mechanism exhibits the highest prediction accuracy, with a coefficient of determination R2 = 0.932 and root mean square error RMSE = 0.012. Additionally, the model's recall curve at different precision levels is obtained to meet the parameter selection requirements under different estimation demands. This method can effectively identify areas with high soil salt content or severe salinization based on portable hyperspectral sensors and unmanned aerial vehicle platforms, and statistically analyze the distribution of soil salt content.

  • Open Access

    Application of a Fusion Attention Mechanism-Based Model Combining Bidirectional Gated Recurrent Units and Recurrent Neural Networks in Soil Nutrient Content Estimation

    by Huan Wang, Lixin Zhang, Jiawei Zhao

    Accurately estimating soil nutrient content, including soil organic matter (OM), nitrogen (N), phosphorus (P), and potassium (K) levels, is crucial for optimizing agricultural practices and ensuring sustainable crop production. This paper proposes a model based on a fusion attention mechanism that combines bidirectional gated recurrent units (BiGRU) and recurrent neural networks (RNN) to estimate soil nutrient content. The proposed model integrates the fused attention mechanism with BiGRU and RNN to enhance the accuracy and effectiveness of soil nutrient prediction. The fused attention mechanism captures key features in the input data, while the BiGRU architecture captures both forward and backward contextual information, enabling the model to capture long-term dependencies in the data. The results demonstrate that the proposed Att-BiGRU-RNN model outperforms other constructed models, exhibiting a higher prediction accuracy and robustness. The model shows good estimation capabilities for soil OM, N, P, and K with estimation accuracies (R2) of 0.959, 0.907, 0.921, and 0.914, respectively. The application of this model in soil nutrient estimation has the potential to optimize fertilizer management, enhance soil fertility, and ultimately improve crop yield. Further research can explore the applicability of this model in precision agriculture and sustainable soil management practices, benefiting the agricultural sector and contributing to food security and environmental sustainability.


  • Open Access

    Parameter optimization and test of hydraulic soil insertion device of orchard gas explosion subsoiling and fertilizing machine

    by Congju Shen, Lixin Zhang, Shouxing Jia, Yan Zhou, Fan Li, Yameng Dai, Jing Zhang, Wenxiao Ma

    Hydraulic soil insertion device is a key component of orchard gas explosion subsoiling and fertilizing machine to realize rod fixed point soil insertion and gas fertilizer injection into soil. In order to explore the influence of the main working parameters and structural parameters on the depth and cylinder pressure of the hydraulic insertion device during the insertion process, the working parameters were optimized to ensure the insertion quality and efficiency. In this paper, force analysis was performed on the rod insertion process, and key parameter equation of soil insertion resistance was established. LS- DYNA finite element simulation software was applied to analyze the force variation of the rod during the insertion process. Box-Behnken test optimization design method and Design-Expert V8.0.6.1 software were used to carry out parameter optimization test of hydraulic insertion device. A multivariate quadratic polynomial regression equation was established by setting the engine revolution, insertion rod diameter and insertion time as independent variables, and the operation parameters of the hydraulic insertion device were optimized based on the relationship between the independent variables and the response values. The results showed that the regression equation model based on the response values of insertion depth and cylinder pressure had a good fitting degree. The engine revolution, rod diameter and insertion time all had significant effects on the increase of insertion depth and decrease of cylinder pressure, with interaction between the engine speed and insertion time with the insertion depth, and interaction between any two factors of engine revolution, rod diameter and insertion time with the cylinder pressure. The influences of the test factors on the insertion depth showed a descending order as engine speed, insertion time, and rod diameter. The influences of the test factors on the cylinder pressure showed a descending order as engine speed, rod diameter, and insertion time. Based on the results of insertion depth and cylinder pressure, the optimal combination of parameters was as follows: engine revolution of 1450 r/min; rod diameter of 32 mm; and the insertion time of 8 s. Under this optimal combination, the insertion depth of the hydraulic insertion device was 44.43 cm, and the cylinder pressure was 23.09 MPa. The experimental results showed that the optimal combination of parameters could meet the agronomic requirements of fast and deep insertion, thus providing a theoretical support for the improvement and optimization of hydraulic soil insertion device of gas explosion subsoiling and fertilizing machine. Key words: orchard management machinery, subsoiling, gas explosion, fertilization, hydraulic insertion, optimization DOI: 10.25165/j.ijabe.20231602.7126 Citation: Shen C J, Zhang L X, Jia S X, Zhou Y, Li F, Dai Y M, et al. Parameter optimization and test of hydraulic soil insertion device of orchard gas explosion subsoiling and fertilizing machine. Int J Agric & Biol Eng, 2023; 16(2): 132–141.

  • Open Access

    Application of Hyperspectral Technology Combined with Genetic Algorithm to Optimize Convolution Long- and Short-Memory Hybrid Neural Network Model in Soil Moisture and Organic Matter

    by Huan Wang, Lixin Zhang, Jiawei Zhao, Xue Hu, Xiao Ma

    A method of soil moisture and organic matter content detection based on hyperspectral technology is proposed. A total of 800 different soil samples and hyperspectral data were collected in the laboratory and from the field. A hyperspectral database was established. After wavelet denoising and principal component analysis (PCA) preprocessing, the convolutional neural network (CNN) module was first used to extract the wavelength features of the data. Then, the long- and short-memory neural network (LSTM) module was used to extract the feature bands and nearby hidden state vectors. At the same time, the genetic algorithm (GA) was used to optimize the hyperparametric weight and bias value of the LSTM training network. At the initial stage, the data were normalized, and all features were analyzed by grey correlation degree to extract important features and to reduce the computational complexity of the data. Then, the GA-optimized CNN-LSTM hybrid neural network (GA-CNN-LSTM) algorithm model proposed in this paper was used to predict soil moisture and organic matter. The prediction performance was compared with CNN, support vector regression (SVR), and CNN-LSTM hybrid neural network model without GA optimization. The GA-CNN-LSTM algorithm was superior to other models in all indicators. The highest accuracy rates of 94.5% and 92.9% were obtained for soil moisture and organic matter, respectively. This method can be applied to portable hyperspectrometers and unmanned aerial vehicles to realize large-scale monitoring of moisture and organic matter distribution and to provide a basis for rational irrigation and fertilization in the future.


  • Open Access

    Application of Hyperspectral Technology Combined With Bat Algorithm-AdaBoost Model in Field Soil Nutrient Prediction

    by Huan Wang, Lixin Zhang, Jiawei Zhao, Xue Hu, Xiao Ma

    This paper proposes a hyperspectral soil nutrient estimation method based on the bat algorithm (BA)-AdaBoost model. The spectral reflectance, the first derivative of the reflectance, and the reciprocal logarithm of the reflectance are analyzed based on the 800 field soil samples and their hyperspectral data collected. The first derivative of the reciprocal logarithm of the reflectance and the sensitive band was extracted using the correlation coefficient method, and the correlation of the content of soil organic matter, phosphorus, and potassium was solved. The BA is used to optimize the two core parameters of the AdaBoost model (i.e., the maximum number of iterations $(n)$ and the weight reduction coefficient $(v)$ of the weak learner), the classification and regression trees(CART) decision tree is selected as the weak regression learner of the model, and the coefficient of determination is used as parameter optimization. Based on the objective function value, a BA-AdaBoost model was constructed to estimate soil organic matter and phosphorus and potassium contents. The results show that the BA-AdaBoost combined model can better search for globally optimal parameters. The AdaBoost model optimized by BA significantly improved accuracy and reliability. Among the three elements, soil organic matter estimation accuracy is the highest, and the coefficient of determination and the root mean square error are 0.867 and 0.151g $\cdot $ kg−1, respectively. Compared with the model before optimization, the model accuracy and reliability improved by 29.0% and 24.1%, respectively. The results indicate that hyperspectral technology combined with the BA-AdaBoost model has certain application prospects in field soil nutrient estimation.