Hossein Fallahnejad
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hossein Fallahnejad has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Aliakbar Gholampour
College of Science and Engineering Flinders University South Australia Australia
1 shared publication - Farhang Farahbod
Department of Structural Engineering, Road, Housing and Urban Development Research Center, Tehran, Iran
1 shared publication - I. M. Nikbin
Assistant professor, Dept. of Civil Engineering, Islamic Azad Univ., Rasht Branch, Rasht, Iran
1 shared publication - Mohammad Reza Davoodi
Faculty of Civil Engineering, Babol Noshirvani University of Technology
1 shared publication S. Rahimi
Graduate Student, Dept. of Civil Engineering, Lamei Gorgani Institute of Higher Education, Gorgan, Iran
1 shared publication- Seyed Rasoul Nabavian
Department of Civil Engineering, Faculty of Engineering, Ayatollah Boroujerdi University, Boroujerd, Iran
1 shared publication
Latest Publications
- 10 November 2024
- Published by Wiley in Structural Concrete
Influence of nano‐silica particles on fracture features of recycled aggregate concrete using boundary effect method: Experiments and prediction models
The aim of this investigation is to assess the impact of using nano‐silica (Na) at varying weight percentages of 0%, 1.5%, 3%, 4.5%, and 6% as partial cement substitute on fracture parameters of recycled aggregate concrete (RAC). A servo‐controlled testing system was employed to carry out three‐point flexure tests on 90 notched beams. Boundary effect method was used in order to interpret the fracture features. The results illustrate that adding Na increases the size‐independent fracture energy, fracture toughness and initial fracture energy of RAC by 29%, 32%, and 24% compared to that without Na, respectively. The maximum values of these parameters occur at 4.5% Na. The reference crack length () decreases from 6% to 22% by adding 1.5% to 6% Na. This shows that the RAC gets more brittle by the addition of Na. Moreover, the RAC behavior moves towards linear elastic fracture mechanics criteria by adding Na. Finally, according to the mechanical properties and test variables, multivariable models were suggested for prediction of the fracture parameters of the RAC containing Na. The models predictions were compared with experimental findings of the previous research.
- 10 November 2024
- Published by Wiley in Structural Concrete
Influence of nano‐silica particles on fracture features of recycled aggregate concrete using boundary effect method: Experiments and prediction models
The aim of this investigation is to assess the impact of using nano‐silica (Na) at varying weight percentages of 0%, 1.5%, 3%, 4.5%, and 6% as partial cement substitute on fracture parameters of recycled aggregate concrete (RAC). A servo‐controlled testing system was employed to carry out three‐point flexure tests on 90 notched beams. Boundary effect method was used in order to interpret the fracture features. The results illustrate that adding Na increases the size‐independent fracture energy, fracture toughness and initial fracture energy of RAC by 29%, 32%, and 24% compared to that without Na, respectively. The maximum values of these parameters occur at 4.5% Na. The reference crack length () decreases from 6% to 22% by adding 1.5% to 6% Na. This shows that the RAC gets more brittle by the addition of Na. Moreover, the RAC behavior moves towards linear elastic fracture mechanics criteria by adding Na. Finally, according to the mechanical properties and test variables, multivariable models were suggested for prediction of the fracture parameters of the RAC containing Na. The models predictions were compared with experimental findings of the previous research.
- 1 March 2016
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 28 (3)
Influence of Mineral Powder Content on the Fracture Behaviors and Ductility of Self-Compacting Concrete
This paper describes and discusses an experimental study on the effect of mineral filler on the fracture behavior and ductility of self-compacting concrete (SCC). Based on an experimental program, a series of three-point bending tests was carried out on 118 notched beams. SCC was prepared with various contents of mineral filler with water-to-cement (w/c) ratios of 0.47 and 0.6. For all mixes, the fracture parameters were analyzed using the work-of-fracture method (WFM) and the size-effect method (SEM) to obtain a suitable correlation between these methods that is used to calibrate fracture numerical models. Given an increase in mineral filler content and a decrease in the w/c ratio in SCC, the results yielded the following conclusions: (1) fracture energies, GF in WFM and Gf in SEM, increase slightly; (2) the brittleness number increases; (3) the characteristic length (Lch) in WFM and the fracture process zone length (Cf) in SEM decrease, which may be due to an increase in the packing density and ...
- 1 March 2016
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 28 (3)
Influence of Mineral Powder Content on the Fracture Behaviors and Ductility of Self-Compacting Concrete
This paper describes and discusses an experimental study on the effect of mineral filler on the fracture behavior and ductility of self-compacting concrete (SCC). Based on an experimental program, a series of three-point bending tests was carried out on 118 notched beams. SCC was prepared with various contents of mineral filler with water-to-cement (w/c) ratios of 0.47 and 0.6. For all mixes, the fracture parameters were analyzed using the work-of-fracture method (WFM) and the size-effect method (SEM) to obtain a suitable correlation between these methods that is used to calibrate fracture numerical models. Given an increase in mineral filler content and a decrease in the w/c ratio in SCC, the results yielded the following conclusions: (1) fracture energies, GF in WFM and Gf in SEM, increase slightly; (2) the brittleness number increases; (3) the characteristic length (Lch) in WFM and the fracture process zone length (Cf) in SEM decrease, which may be due to an increase in the packing density and ...