Vitalii Kalinchyk
Vitalii Kalinchyk has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Vitalii Pobigaylo
Національний технічний університет України «Київський політехнічний інститут імені Ігоря Сікорського
21 shared publications - Oleksandr Meita
Національний технічний університет України "Київський політехнічний інститут імені Ігоря Сікорського
17 shared publications - Vasyl Kalinchyk
Національний технічний університет України «Київський політехнічний інститут імені Ігоря Сікорського
16 shared publications - Olena Borychenko
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute
13 shared publications Aleksandr Meita
9 shared publicationsВасиль Калінчик
Національний технічний університет України "Київський політехнічний інститут імені Ігоря Сікорського
7 shared publications
Latest Publications
- Open Access
- 30 April 2026
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of NTU "KhPI". Series: Problems of Electrical Machines and Apparatus Perfection. The Theory and Practice
- No. 1 (15),p. 61-64
Justification of a comprehensive approach to monitoring physical factors in the working environment
The article substantiates the use of a comprehensive approach when choosing the structure of a system for monitoring hazardous and harmful factors in the working environment, which should provide the most reliable, timely, and complete information about the course of processes related to working conditions and safety, continuous monitoring of occupational safety for the timely detection and analysis of changes that have occurred, preventing undesirable deviations from established requirements, and reducing/preventing possible losses by taking risks into account. A structural diagram of the system for monitoring physical factors in the production environment has been developed, which includes the implementation of a set of tasks aimed at identifying cases where controlled factors exceed maximum permissible levels, as well as the formation of data necessary for making informed management decisions.
- 30 April 2026
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of NTU "KhPI". Series: Problems of Electrical Machines and Apparatus Perfection. The Theory and Practice
- No. 1 (15),p. 61-64
Open AccessJustification of a comprehensive approach to monitoring physical factors in the working environment
The article substantiates the use of a comprehensive approach when choosing the structure of a system for monitoring hazardous and harmful factors in the working environment, which should provide the most reliable, timely, and complete information about the course of processes related to working conditions and safety, continuous monitoring of occupational safety for the timely detection and analysis of changes that have occurred, preventing undesirable deviations from established requirements, and reducing/preventing possible losses by taking risks into account. A structural diagram of the system for monitoring physical factors in the production environment has been developed, which includes the implementation of a set of tasks aimed at identifying cases where controlled factors exceed maximum permissible levels, as well as the formation of data necessary for making informed management decisions.
- Open Access
- 26 June 2025
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of NTU "KhPI". Series: Problems of Electrical Machines and Apparatus Perfection. The Theory and Practice
- No. 1 (13),p. 76-79
Architecture of the automated system for monitoring and controlling power consumption of the crushing and grinding complex
The structure of the system of automatic monitoring and control of electricity consumption of the crushing and grinding complex, which is the basis of the system for monitoring the electricity consumption of the crushing and grinding complex, is proposed. The reliability of the transmission of pulse number information from electricity meters is analyzed. The proposed structure of the automatic control system of the crushing and grinding complex.
- 26 June 2025
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of NTU "KhPI". Series: Problems of Electrical Machines and Apparatus Perfection. The Theory and Practice
- No. 1 (13),p. 76-79
Open AccessArchitecture of the automated system for monitoring and controlling power consumption of the crushing and grinding complex
The structure of the system of automatic monitoring and control of electricity consumption of the crushing and grinding complex, which is the basis of the system for monitoring the electricity consumption of the crushing and grinding complex, is proposed. The reliability of the transmission of pulse number information from electricity meters is analyzed. The proposed structure of the automatic control system of the crushing and grinding complex.
- Open Access
- 17 March 2025
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 1
MANAGEMENT OF ELECTRICAL LOAD OF PRODUCTION FACILITIES WITH THE HELP OF CONSUMER - REGULATORS
It is shown that in the existing energy sector of Ukraine, basic power generating capacities significantly outnumber shunting capacities, which are essential for efficiently covering electricity needs, especially during periods of peak demand for electricity. The creation of shunting power capacities requires significant funds and, just as importantly, considerable time. Another way to solve this problem is to manage electricity consumption. Reducing electricity consumption by industrial enterprises during peak hours can help to level the load schedules of power systems, which will reduce the required number of shunting power sources to cover the deficit during peak hours and, accordingly, reduce the cost of electricity. At enterprises, load reduction can be achieved at the expense of regulated consumers. To rank and optimize the work of consumer-regulators, a genetic algorithm is proposed - a heuristic search method used to solve optimization and modeling problems by randomly selecting a combination and variation of the desired parameters. A genetic algorithm for selecting consumers-regulators, which will be used to regulate the load, has been studied and built. This model was tested for a chemical industry enterprise producing ammonia.
- 17 March 2025
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 1
Open AccessMANAGEMENT OF ELECTRICAL LOAD OF PRODUCTION FACILITIES WITH THE HELP OF CONSUMER - REGULATORS
It is shown that in the existing energy sector of Ukraine, basic power generating capacities significantly outnumber shunting capacities, which are essential for efficiently covering electricity needs, especially during periods of peak demand for electricity. The creation of shunting power capacities requires significant funds and, just as importantly, considerable time. Another way to solve this problem is to manage electricity consumption. Reducing electricity consumption by industrial enterprises during peak hours can help to level the load schedules of power systems, which will reduce the required number of shunting power sources to cover the deficit during peak hours and, accordingly, reduce the cost of electricity. At enterprises, load reduction can be achieved at the expense of regulated consumers. To rank and optimize the work of consumer-regulators, a genetic algorithm is proposed - a heuristic search method used to solve optimization and modeling problems by randomly selecting a combination and variation of the desired parameters. A genetic algorithm for selecting consumers-regulators, which will be used to regulate the load, has been studied and built. This model was tested for a chemical industry enterprise producing ammonia.
- Open Access
- 26 December 2024
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of NTU "KhPI". Series: Problems of Electrical Machines and Apparatus Perfection. The Theory and Practice
- No. 2 (12),p. 46-49
A complex approach to monitoring the physical factors of the production environment
It is shown that production safety in modern conditions is ensured only with constant assessment and effective control of production risks. The transition to information technology poses additional challenges to the technology of information preparation. The main requirement for the development of a management system for ensuring safe working conditions and occupational safety, built using modern information technologies, is to exclude incomplete information, which allows for the implementation of such an open management system that, in specific production conditions, would provide justification for management decisions based on the processing of available information. Moreover, the main core of such a system is a system for monitoring the physical factors of the production environment. An integrated approach to monitoring the physical factors of the production environment is substantiated. It is shown that the integrated approach consists in the mandatory consideration of all physical factors of the production environment available at the workplace, in ensuring prompt collection of data on the actual levels of these factors and their further processing. The author proposes a structural scheme for comprehensive monitoring of physical factors of the production environment, which includes the implementation of tasks aimed at identifying cases of excess of the levels of controlled factors over the maximum permissible levels, as well as the formation of data necessary for making sound management decisions.
- 26 December 2024
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of NTU "KhPI". Series: Problems of Electrical Machines and Apparatus Perfection. The Theory and Practice
- No. 2 (12),p. 46-49
Open AccessA complex approach to monitoring the physical factors of the production environment
It is shown that production safety in modern conditions is ensured only with constant assessment and effective control of production risks. The transition to information technology poses additional challenges to the technology of information preparation. The main requirement for the development of a management system for ensuring safe working conditions and occupational safety, built using modern information technologies, is to exclude incomplete information, which allows for the implementation of such an open management system that, in specific production conditions, would provide justification for management decisions based on the processing of available information. Moreover, the main core of such a system is a system for monitoring the physical factors of the production environment. An integrated approach to monitoring the physical factors of the production environment is substantiated. It is shown that the integrated approach consists in the mandatory consideration of all physical factors of the production environment available at the workplace, in ensuring prompt collection of data on the actual levels of these factors and their further processing. The author proposes a structural scheme for comprehensive monitoring of physical factors of the production environment, which includes the implementation of tasks aimed at identifying cases of excess of the levels of controlled factors over the maximum permissible levels, as well as the formation of data necessary for making sound management decisions.
- Open Access
- 26 December 2024
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of NTU "KhPI". Series: Problems of Electrical Machines and Apparatus Perfection. The Theory and Practice
- No. 2 (12),p. 50-55
Application of neural networks for predicting electric load
The paper shows that the operational management of the power consumption regime is reduced to solving the problem of operational forecasting of the enterprise's load. The paper analyzes the works devoted to the forecasting of electric loads of power systems and industrial enterprises. It is shown that in order to achieve the required forecast accuracy, it is advisable to use adaptive forecasting procedures and, in particular, to use artificial neural networks. The use of artificial neural networks for forecasting the load of industrial enterprises is due to their properties, such as the ability to learn, reliability with incomplete input information, and the rapid response of the learned network to input influences. The conditions for determining the configuration of a neural network are considered. The structure of a neural network for predicting the electrical load of an industrial enterprise is presented. The process of training an artificial neural network with fitting the model to data from a retrospective sample is presented. The considered models of daily load forecasting were investigated on retrospective data on the modes of electricity consumption of a chemical enterprise with normalization of input data. The graphs of the actual total load and the forecast obtained by the artificial neural network models are presented. The research has shown that the use of an artificial neural network allows for a qualitative forecast of the enterprise's load under normal operating conditions of the equipment.
- 26 December 2024
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of NTU "KhPI". Series: Problems of Electrical Machines and Apparatus Perfection. The Theory and Practice
- No. 2 (12),p. 50-55
Open AccessApplication of neural networks for predicting electric load
The paper shows that the operational management of the power consumption regime is reduced to solving the problem of operational forecasting of the enterprise's load. The paper analyzes the works devoted to the forecasting of electric loads of power systems and industrial enterprises. It is shown that in order to achieve the required forecast accuracy, it is advisable to use adaptive forecasting procedures and, in particular, to use artificial neural networks. The use of artificial neural networks for forecasting the load of industrial enterprises is due to their properties, such as the ability to learn, reliability with incomplete input information, and the rapid response of the learned network to input influences. The conditions for determining the configuration of a neural network are considered. The structure of a neural network for predicting the electrical load of an industrial enterprise is presented. The process of training an artificial neural network with fitting the model to data from a retrospective sample is presented. The considered models of daily load forecasting were investigated on retrospective data on the modes of electricity consumption of a chemical enterprise with normalization of input data. The graphs of the actual total load and the forecast obtained by the artificial neural network models are presented. The research has shown that the use of an artificial neural network allows for a qualitative forecast of the enterprise's load under normal operating conditions of the equipment.
- 17 December 2024
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 4
RANKING OF CONSUMERS-REGULATORSELECTRICAL LOAD
It is shown that managing electricity consumption by regulating the power of consumer-regulators is an important factor in reducing the loads of industrial enterprises. It is shown that during peak hours of the power system, it is advisable to reduce the capacity of enterprises to level the overall schedule of electrical loads. The procedure for reducing the total load can be achieved by regulating the power consumption of consumers - regulators or by disconnecting them. To rank consumers-regulators, it is necessary to perform an optimization procedure. For the optimization procedure, we propose the use of combinatorial algorithms based on heuristic schemes for finding solutions. The method of finding the optimal list of such consumers using a genetic algorithm, a heuristic search method used to solve optimization and modeling problems by randomly selecting a combination and variation of the noise parameters using mechanisms similar to natural selection, is investigated. To solve the problem, a software model of the evolutionary process - the development of a certain population of individuals - is created. An algorithm is described that can be used to obtain the most optimal solution for the choice of consumers at an enterprise. The genetic algorithm is considered to solve the problem of selecting the composition of consumers at the lower level of the enterprise's power grid. In the process of selection, the functions of loss and number of switching are analyzed, which tend to minimize when searching for a solution. The program model of the evolutionary process includes the following stages: creation of the initial population; crossing; mutation. A detailed description of the genetic algorithm, its essence, and the principle of its application for load regulation by selecting the optimal consumer option for regulating the electric load are considered. The criteria for selecting the most optimal list of consumer-regulators are the functions of loss and the number of switching operations.
- 17 December 2024
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 4
RANKING OF CONSUMERS-REGULATORSELECTRICAL LOAD
It is shown that managing electricity consumption by regulating the power of consumer-regulators is an important factor in reducing the loads of industrial enterprises. It is shown that during peak hours of the power system, it is advisable to reduce the capacity of enterprises to level the overall schedule of electrical loads. The procedure for reducing the total load can be achieved by regulating the power consumption of consumers - regulators or by disconnecting them. To rank consumers-regulators, it is necessary to perform an optimization procedure. For the optimization procedure, we propose the use of combinatorial algorithms based on heuristic schemes for finding solutions. The method of finding the optimal list of such consumers using a genetic algorithm, a heuristic search method used to solve optimization and modeling problems by randomly selecting a combination and variation of the noise parameters using mechanisms similar to natural selection, is investigated. To solve the problem, a software model of the evolutionary process - the development of a certain population of individuals - is created. An algorithm is described that can be used to obtain the most optimal solution for the choice of consumers at an enterprise. The genetic algorithm is considered to solve the problem of selecting the composition of consumers at the lower level of the enterprise's power grid. In the process of selection, the functions of loss and number of switching are analyzed, which tend to minimize when searching for a solution. The program model of the evolutionary process includes the following stages: creation of the initial population; crossing; mutation. A detailed description of the genetic algorithm, its essence, and the principle of its application for load regulation by selecting the optimal consumer option for regulating the electric load are considered. The criteria for selecting the most optimal list of consumer-regulators are the functions of loss and the number of switching operations.
- Open Access
- 23 July 2024
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of NTU "KhPI". Series: Problems of Electrical Machines and Apparatus Perfection. The Theory and Practice
- No. 1 (11),p. 72-75
Parametric method of information transfer in energy resources expenditure control systems
The article examines the justification of the parametric method of information transmission for the construction of energy resource consumption control systems. It is shown that the system of accounting for energy resources should be a distributed multi-level system of measurements, processing, storage and transmission of commercial accounting data and should be built on the principles of open architecture and distributed functioning. It is shown that the organization of hierarchical complexes for solving control tasks depends to a large extent on the issues of effective information transmission and that the creation of information networks is the most difficult task. sensors, into a voltage proportional to it and the corresponding binary code. The structural diagram of the device implementing the specified principle is presented. A method of calculating the parameters of the device for transmitting information from two-position sensors is proposed and an example of calculating the parameters of such a device is given
- 23 July 2024
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of NTU "KhPI". Series: Problems of Electrical Machines and Apparatus Perfection. The Theory and Practice
- No. 1 (11),p. 72-75
Open AccessParametric method of information transfer in energy resources expenditure control systems
The article examines the justification of the parametric method of information transmission for the construction of energy resource consumption control systems. It is shown that the system of accounting for energy resources should be a distributed multi-level system of measurements, processing, storage and transmission of commercial accounting data and should be built on the principles of open architecture and distributed functioning. It is shown that the organization of hierarchical complexes for solving control tasks depends to a large extent on the issues of effective information transmission and that the creation of information networks is the most difficult task. sensors, into a voltage proportional to it and the corresponding binary code. The structural diagram of the device implementing the specified principle is presented. A method of calculating the parameters of the device for transmitting information from two-position sensors is proposed and an example of calculating the parameters of such a device is given
- Open Access
- 23 July 2024
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of NTU "KhPI". Series: Problems of Electrical Machines and Apparatus Perfection. The Theory and Practice
- No. 1 (11),p. 76-78
Monitoring system of dangerous and harmful factors in the production environment
The work presents the principles of building control systems of physical factors of the production environment. The set of information sources of control of physical harmful and dangerous factors of the production environment is considered as a set of sensors of random processes. It is shown that for the construction of a system of physical control of the production environment, it is expedient to use adaptive principles of system construction. The structural scheme of the system implementing the specified principle is presented.
- 23 July 2024
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of NTU "KhPI". Series: Problems of Electrical Machines and Apparatus Perfection. The Theory and Practice
- No. 1 (11),p. 76-78
Open AccessMonitoring system of dangerous and harmful factors in the production environment
The work presents the principles of building control systems of physical factors of the production environment. The set of information sources of control of physical harmful and dangerous factors of the production environment is considered as a set of sensors of random processes. It is shown that for the construction of a system of physical control of the production environment, it is expedient to use adaptive principles of system construction. The structural scheme of the system implementing the specified principle is presented.
- 23 July 2024
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of NTU "KhPI". Series: Problems of Electrical Machines and Apparatus Perfection. The Theory and Practice
- No. 1 (11),p. 68-71
Evaluation of working conditions in the production system
The paper analyzes methods for assessing professional risk, emphasizing that the primary method is job certification. Job certification establishes the compliance of the workplace with regulatory characteristics for specific risk factors in the production environment. The analysis reveals that the existing methodology for job certification does not provide insights into changes in the parameters of hazardous and harmful factors in the production environment, and consequently, changes in working conditions between planned certifications. The study advocates for a comprehensive assessment of the collective impact of all factors in the production environment and work processes on the human body. This is achieved through hygienic risk factor assessment. The paper highlights the appropriateness of quantitatively assessing working conditions in points, considering the simultaneous influence of multiple hazardous factors. A procedure for point-based assessment of working conditions is proposed, and the applicability of Haber's Law to determine the cumulative dose of a harmful factor in the body is demonstrated.
- 23 July 2024
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of NTU "KhPI". Series: Problems of Electrical Machines and Apparatus Perfection. The Theory and Practice
- No. 1 (11),p. 68-71
Evaluation of working conditions in the production system
The paper analyzes methods for assessing professional risk, emphasizing that the primary method is job certification. Job certification establishes the compliance of the workplace with regulatory characteristics for specific risk factors in the production environment. The analysis reveals that the existing methodology for job certification does not provide insights into changes in the parameters of hazardous and harmful factors in the production environment, and consequently, changes in working conditions between planned certifications. The study advocates for a comprehensive assessment of the collective impact of all factors in the production environment and work processes on the human body. This is achieved through hygienic risk factor assessment. The paper highlights the appropriateness of quantitatively assessing working conditions in points, considering the simultaneous influence of multiple hazardous factors. A procedure for point-based assessment of working conditions is proposed, and the applicability of Haber's Law to determine the cumulative dose of a harmful factor in the body is demonstrated.
- Open Access
- 15 May 2024
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 2
STATISTICAL ESTIMATES OF VARIABLES DETERMINING THE INTERVAL OF ELECTRIC POWER MONITORING
It is demonstrated that digital processing of information on electricity consumption is possible when transforming the studied process into a discrete form. The correct choice of the monitoring interval allows for the accurate reconstruction of the values of the studied function in the intervals between measurements. It is shown that when organizing the monitoring of average power, it is necessary to select a discretization interval that provides adequate representation of the current process. The proposed procedure for choosing the interval of electric power monitoring is based on determining the duration of the deviation of the random function of electric power change, subject to certain constraints. The justified number of monitoring studies is established to determine the optimal interval of electric power monitoring. It is shown that the most rational method of processing experimental data will be the method of joint estimation for correlation and standard deviation. Показано, що цифрова обробка інформації про електроспоживання можлива при перетворенні досліджуваного процесу в дискретну форму. Правильний вибір інтервалу контролю дозволяє з достатньою мірою точності відновити значення досліджуваної функції в інтервалах між вимірами. Показано, що при організації контролю середньої потужності необхідно вибирати такий інтервал дискретизації, який би забезпечував адекватне представлення поточного процесу. Запропонована процедура вибору інтервалу контролю електричної потужності, яка заснована визначенні тривалості викиду випадкової функції зміни електричної потужності за деяке введене обмеження. Обґрунтована кількість дослідів контролю для визначення оптимального інтервалу контролю електричної потужності. Показано, що найбільш раціональним методом обробки експериментальних даних буде метод спільного визначення оцінок для кореляції і середньоквадратичного відхилення.
- 15 May 2024
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 2
Open AccessSTATISTICAL ESTIMATES OF VARIABLES DETERMINING THE INTERVAL OF ELECTRIC POWER MONITORING
It is demonstrated that digital processing of information on electricity consumption is possible when transforming the studied process into a discrete form. The correct choice of the monitoring interval allows for the accurate reconstruction of the values of the studied function in the intervals between measurements. It is shown that when organizing the monitoring of average power, it is necessary to select a discretization interval that provides adequate representation of the current process. The proposed procedure for choosing the interval of electric power monitoring is based on determining the duration of the deviation of the random function of electric power change, subject to certain constraints. The justified number of monitoring studies is established to determine the optimal interval of electric power monitoring. It is shown that the most rational method of processing experimental data will be the method of joint estimation for correlation and standard deviation. Показано, що цифрова обробка інформації про електроспоживання можлива при перетворенні досліджуваного процесу в дискретну форму. Правильний вибір інтервалу контролю дозволяє з достатньою мірою точності відновити значення досліджуваної функції в інтервалах між вимірами. Показано, що при організації контролю середньої потужності необхідно вибирати такий інтервал дискретизації, який би забезпечував адекватне представлення поточного процесу. Запропонована процедура вибору інтервалу контролю електричної потужності, яка заснована визначенні тривалості викиду випадкової функції зміни електричної потужності за деяке введене обмеження. Обґрунтована кількість дослідів контролю для визначення оптимального інтервалу контролю електричної потужності. Показано, що найбільш раціональним методом обробки експериментальних даних буде метод спільного визначення оцінок для кореляції і середньоквадратичного відхилення.